Busybox already uses sendfile in httpd. This patch proposes to use it
globally to copy data between file descriptors.
It speeds up the copying on slow systems a lot - below are the times needed
to copy a 450Mb file with and without this option enabled on a BeagleBone
Black:
sendfile:
user 0m0.000s
sys 0m8.170s
read/write 4k:
user 0m0.470s
sys 0m16.300s
function old new delta
bb_full_fd_action 394 474 +80
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Sometimes ARG_MAX is small (like 32k) yet sysconf(_SC_ARG_MAX)
is big, and people prefer using the bigger value.
OTOH, with sufficiently large ARG_MAX, further wins from
sysconf(_SC_ARG_MAX) being bigger are exponentially smaller:
you can see 4 times fewer fork+execs when you run find, but
when each execed process already takes a thousand parameters
it's likely execution time is dominated by what that process
does with each parameter.
Thus, with this change ARG_MAX is used if it's sufficiently big,
otherwise sysconf(_SC_ARG_MAX) is used.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes "G" (goto end of input) command work as well as
/search_for_nonexistent_string: both will read to EOF now
even from somewhat slow input (such as kernel's "git log").
function old new delta
ndelay_on 35 43 +8
ndelay_off 35 43 +8
read_lines 695 691 -4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 16/-4) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is not clear why we were excluding init from this.
The "getpid() != 1" clause was there from the beginning (2001)
but not explained.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is an interesting trick, but so far I only managed to make it work
correctly, not to make it faster and/or smaller.
The code is ifdefed out for now.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This set of patches adds a simple unit-testing framework to Busybox
unit-tests: add some helper macros for unit-test framework implementation
unit-tests: implement the unit-testing framework
unit-tests: add basic documentation on writing the unit test cases
unit-tests: modify the Makefile 'test' target to run unit-tests too
unit-tests: add two example test cases
unit-tests: modify the existing strrstr test code to use the unit-test framework
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The find utility uses a hardcoded value of 32 * 1024 as the limit of
the command-line length when calling 'find -exec ... {} +'. This results
in over 4 times more execve() calls than in coreutils' find.
This patch uses the limit defined in system headers.
Based on the patch by Bartosz Golaszewski <bartekgola@gmail.com>.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
POSIX.1-2008 removed the usleep function, provide a fallback
implementaion using the recommended nanosleep().
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When you build with FEATURE_INSTALLER disabled, you get a build
warning like so:
libbb/appletlib.c: In function 'busybox_main':
libbb/appletlib.c:691:7: warning: variable 'use_symbolic_links' set but
not used [-Wunused-but-set-variable]
int use_symbolic_links;
^
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This is needed for, eg, hurd, which is known to have no constraints.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently, sed pre-opens all files, which may cause EMFILE errors
on systems with low ulimit -n. Change sed to open one file at a time.
function old new delta
get_next_line 177 235 +58
sed_main 682 652 -30
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 58/-30) Total: 28 bytes
Based on the patch by Daniel Borca <dborca@yahoo.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes the following TODO:
stty's visible() function and catv's guts are identical. Merge them into
an appropriate libbb function.
Also makes catv behave exactly like coreutils' cat -v e.g. it'll print 'M-^I'
instead of 'M- '.
function old new delta
visible - 70 +70
do_display 431 379 -52
catv_main 306 250 -56
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/2 up/down: 70/-108) Total: -38 bytes
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the target can tolerate these issues, then gcc is smart enough
to generate the same code (x86_64 produces the same code). If the
target can't, then it needs the memcpy anyways.
libbb/hash_md5_sha.c: In function 'common64_end':
libbb/hash_md5_sha.c:87:4: warning:
dereferencing type-punned pointer will break strict-aliasing rules
*(uint64_t *) (&ctx->wbuffer[64 - 8]) = t;
libbb/hash_md5_sha.c: In function 'sha512_end':
libbb/hash_md5_sha.c:886:4: warning:
dereferencing type-punned pointer will break strict-aliasing rules
*(uint64_t *) (&ctx->wbuffer[128 - 8]) = t;
libbb/hash_md5_sha.c:889:4: warning:
dereferencing type-punned pointer will break strict-aliasing rules
*(uint64_t *) (&ctx->wbuffer[128 - 16]) = t;
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The current password checking is unable to distinguish between the user
entering an empty password or pressing Control-D. As a result, an empty
password always results in normal startup.
We modify bb_ask to return NULL if Control-D is pressed without entering
a password. The sulogin applet is then modified to only proceed to
normal startup if bb_ask returns NULL. This covers EOF with no password,
interrupt by timeout and ^C.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In vi mode, the 'p' and 'P' commands caused a segfault when nothing had
been put in the buffer yet because the delptr was not initialized.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This brings the naming more in line with other hashes.
Pulled most statics and constants into it.
Also noticed that two byte arrays are 1 element too big.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Existing copyright notice for binary would need to be longer to achieve
optimal accuracy. This compromise punts to the source for full notices,
but does note the years of the copyrights and that there are many authors,
all licensing under GPLv2.
Signed-off-by: Bradley M. Kuhn <bkuhn@ebb.org>
Signed-off-by: Tony Sebro <tony@sfconservancy.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes unzip to FAT filesystems not exit with error.
This is similar to how the "normal" unzip works.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
ln_main 445 524 +79
packed_usage 29182 29179 -3
Signed-off-by: Simon B <sburnet@hotmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
According to RFC 5321 the argument to HELO "contains the fully-qualified
domain name of the SMTP client" or its IP address if no FQDN is available.
BusyBox sendmail uses the NIS domain name instead which, in many cases,
is likely to be the default "(none)". [vda: yes, I checked my machine
and its uts.domainname was indeed "(none)"]
Using the host name is more likely to satisfy the intent of the RFC while
allowing the otherwise unused safe_getdomainname function to be removed.
Signed-off-by: Ron Yorston <rmy@tigress.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When CONFIG_FEATURE_EDITING_SAVE_ON_EXIT is set to y, the histfile
will get cleared if the total amount of history lines is less than MAX_HISTORY.
Only if the histfile is not empty _and_ the amount of lines currently
in memory are equal to or greater than MAX_HISTORY, history saving will
work as expected with this feature enabled.
Output from defconfig + CONFIG_FEATURE_EDITING_SAVE_ON_EXIT=y:
$ echo "foo" > ~/.ash_history
$ ./busybox ash
~/busybox/a $ echo "bar" > /dev/null
~/busybox/a $ exit
$ cat ~/.ash_history
$
Output with the patch applied and same config as above:
$ echo "foo" > ~/.ash_history
$ ./busybox ash
~/busybox/b $ echo "bar" > /dev/null
~/busybox/b $ exit
$ cat ~/.ash_history
foo
echo "bar" > /dev/null
exit
$
Signed-off-by: Dennis Groenen <tj.groenen at gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
unpack_gz_stream_with_info: fix buggy error check
man: fix possible accesses past the end of a string
move seamless uncompression helpers from read_printf.c to open_transformer.c
function old new delta
show_manpage 153 212 +59
unpack_gz_stream_with_info 520 539 +19
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The xsocket_type() function had an optional "family" argument
that was enabled only if IPv6 is enabled. In the case of the
function was called with a valid AF_UNIX argument, and IPv6 is
disabled, this argument was silently ignored.
This patch makes the "family" argument mandatory, while keeping
the old behavior i.e., if AF_UNSPEC is passed, we try first IPv6
(if it's enabled) and fallback to IPv4.
Also I changed all callers of xsocket_type() to reflect its new
interface.
Signed-off-by: Jonh Wendell <jonh.wendell@vexcorp.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This allows to find mount points of 'char' devices such as UBI volumes
which otherwise fail for example with 'df' command:
/ # df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 72091984 12360980 56068924 18% /
devtmpfs 115236 4 115232 0% /dev
tmpfs 28672 32 28640 0% /tmp
/dev/ubi0_0 360268 18348 341920 5% /tmp/mnt/userfs
/ # df /dev/ubi0_0
Filesystem 1K-blocks Used Available Use% Mounted on
devtmpfs 115236 4 115232 0% /dev
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
First change fixes "read -n NUM". Apparently poll() won't report
data availability if cc[VMIN] > 1 until there are at least cc[VMIN] bytes.
function old new delta
read_line_input 3885 3877 -8
shell_builtin_read 1097 1087 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-18) Total: -18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add a DAEMON_DOUBLE_FORK flag to make bb_daemonize double-fork so it isn't a
session leader, and hence doesn't get a controlling tty on Linux if a tty is
ever opened, similar to how libdaemon's daemon_fork or the big
start-stop-daemon does it - And use it in start-stop-daemon.
For details, see http://www.win.tue.nl/~aeb/linux/lk/lk-10.html#ss10.3
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
die_if_bad_username 77 97 +20
Based on patches from Tito.
The changes are:
better comments
we disallow '@' now - in practice such usernames will be unusable
use of the portable filename character set plus '$'
don't use isalnum as it allows non-ASCII letters in legacy 8-bit locales (pointed out by Rich Felker)
enforce maximum length of LOGIN_NAME_MAX (including NUL)
don't allow '$', '.', and '-' as first char
don't print the illegal char in error message as if it is a wide char it will be unreadable
print the position of the illegal character
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
