Commit Graph

14128 Commits

Author SHA1 Message Date
Denys Vlasenko
d8330ca4a4 examples/var_service/supplicant_if: new service example
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-20 18:09:00 +02:00
Denys Vlasenko
92d98f0612 ifupdown: when flushing addresses with "ip", add label %label%
User report:

or our board we setup eth0:0 on a 10.10.10.x/29 netwrok.

The problem is ip addr flush dev eth0:0 removes all ip addresses from
eth0.  You can see this if you run
ip -stat -stat addr flush dev eth0:0

2: eth0    inet 172.27.105.10/22 brd 172.27.107.255 scope global eth0
       valid_lft forever preferred_lft forever
2: eth0    inet 10.10.10.9/29 scope global eth0:0
       valid_lft forever preferred_lft forever
2: eth0    inet6 fe80::a2f6:fdff:fe18:2b13/64 scope link
       valid_lft forever preferred_lft forever

*** Round 1, deleting 3 addresses ***
*** Flush is complete after 1 round ***

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-20 17:31:11 +02:00
Denys Vlasenko
244fdd45c7 ash: fix handling of bashism $'xxx' with high-bit chars. Closes 9236
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-20 17:04:09 +02:00
Denys Vlasenko
d6a37d86ba hush: document better where bad redirect syntax is detected
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-20 16:22:24 +02:00
Hauke Mehrtens
4ff86df861 libnetlink: fix alignment of netlink messages
A padding to align a message should not only be added between
different attributes of a netlink message, but also at the end of the
message to pad it to the correct size.

Without this patch the following command does not work and returns an
error code:
ip link add type nlmon

Without this ip from busybox sends this:

sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
	msg_namelen=12, msg_iov=[{iov_base={{len=45, ...},
		"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon"}, iov_len=45}],
	msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 45
return value: 2

The normal ip utile from iproute2 sends this:

sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
	msg_namelen=12, msg_iov=[{iov_base={{len=48, ...},
		"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon\0\0\0"}, iov_len=48}],
	msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 48
return value: 0

With this patch ip from busybox sends this:

sendmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000},
	msg_namelen=12, msg_iov=[{iov_base={{len=48, ...},
		"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\20\0\22\0\t\0\1nlmon\0\0\0"}, iov_len=48}],
	msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 48
return value: 0

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-18 22:55:47 +02:00
Denys Vlasenko
0ae0509679 libbb: do not use fflush_unlocked, musl does not like fflush_unlocked(NULL)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-18 21:49:30 +02:00
Rostislav Skudnov
204c7fb229 ash: exit after subshell error when errexit option is set
When "set -e" option is on, shell must exit when any command fails,
including compound commands of the form (compound-list) executed in a
subshell. Bash and dash shells have this behaviour.

Also add a corresponding testcase.

Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-17 23:28:23 +02:00
Denys Vlasenko
b157eb13cb fdisk: fix CONFIG_FEATURE_SUN_LABEL=y build
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-17 21:05:06 +02:00
Denys Vlasenko
7373759947 fix "aloc" -> "alloc" typos
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-17 20:58:22 +02:00
Denys Vlasenko
7bc3d39695 ash: add a FIXME for bug 9246
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-17 20:53:47 +02:00
Francis Rounds
d2c5de0130 svlogd: strip leading '!' from processor lines
When using svlogd's processor functionality to run arbitrary commands
on log rotation, the line in the config is executed verbatim, i.e. the
exclamation mark is included.

For example, if the config file contains:

    s100
    !cat

then when it's time to rotate the log files after each 100 bytes, sh -c
"!cat" will be run, instead of sh -c "cat" as intended. The result is
svlogd logging

    /bin/bash: !cat: command not found
    svlogd: warning: processor failed, restart: /tmp/svlogd/

over and over again as it keeps attempting to execute the processor and
failing (unless you happen to have a "!cat" binary around :)).

Skipping the exclamation mark when performing the wstrdup() fixes the
issue.

Signed-off-by: Francis Rounds <francis.rounds@4bridgeworks.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-15 14:05:04 +02:00
Denys Vlasenko
de1996dac5 vi: make "g<key>" error message less likely to show garbage
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-15 13:53:42 +02:00
Denys Vlasenko
7cef4817d6 libbb:/send_to_from: do not require that "to" should have the same AF. Closes 9146
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-15 13:20:51 +02:00
Mike Frysinger
3a45b87ac3 modutils: support finit_module syscall
On some systems like Chromium OS, loading modules from non-verified
filesystems is denied.  Only finit_module is allowed because an open
fd is passed which can be checked against a verified location.

Change the module loading code to first attempt finit_module and if
that fails for whatever reason, fall back to the existing logic.

On x86_64, this adds ~80 bytes to modutils/modutils.o and ~68 bytes
to modutils/modprobe-small.o.

Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-15 12:16:33 +02:00
Denys Vlasenko
7fa799a97d less: switch off nonblock on kbd_fd before exit
This is only necessary if we use stdout fd.

function                                             old     new   delta
less_exit                                             32      51     +19
less_main                                           2540    2543      +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 22/0)               Total: 22 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-13 21:05:48 +02:00
Denys Vlasenko
3c0e579a06 less: fall back to using fd #1 for keyboard reading. Closes 9231
function                                             old     new   delta
less_main                                           2535    2540      +5

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-13 20:53:38 +02:00
Denys Vlasenko
20a3262cd7 mdev: create devices from /sys/dev
Currently some new devices that have a bus but no class will
be missed by mdev coldplug device creation after boot. This
happens because mdev recursively searches /sys/class which will
by definition only find class devices.

Some important devices such as iio and gpiochip does not have
a class. But users will need them.

This switches from using /sys/class as the place to look for
devices to create to using /sys/dev where all char and block
devices are listed.

The subsystem lookup code that provide the G.subsystem
environment variable is changed from using the directory
name of the class device to instead dereference the
"subsystem" symlink for the device, and look at the last
element of the path of the symlink for the subsystem, which
will work with class devices and bus devices alike. (The new
bus-only devices only symlink to the /sys/bus/* hierarchy.)

We delete the legacy kernel v2.6.2x /sys/block device path
code as part of this change. It's too old to be kept alive.

Tested on kernel v4.6-rc2 with a bunch of devices, including
some IIO and gpiochip devices.

With a print inserted before make_device() the log looks
like so:

Create device from "/sys/dev/char/1:1", subsystem "mem"
Create device from "/sys/dev/char/1:2", subsystem "mem"
Create device from "/sys/dev/char/1:3", subsystem "mem"
Create device from "/sys/dev/char/1:5", subsystem "mem"
(...)
Create device from "/sys/dev/block/179:56", subsystem "block"
Create device from "/sys/dev/block/179:64", subsystem "block"

function                                             old     new   delta
mdev_main                                           1388    1346     -42
dirAction                                            134      14    -120
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-162)           Total: -162 bytes

Cc: Isaac Dunham <ibid.ag@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-07 14:09:01 +02:00
Denys Vlasenko
b9f56e82da sendmail: make it possible to pause after connection helper is started
If a non-starttls helper is in use, initial 220 response is processed by us,
not by helper.
Some servers consider us to be a spammer if we don't wait for it.

It is not in protocol, but it is a real-life problem.

The workaround in this patch is a magic envvar, $SMTP_ANTISPAM_DELAY:

...
	-H 'PROG ARGS'	Run connection helper. Examples:
		openssl s_client -quiet -tls1 -starttls smtp -connect smtp.gmail.com:25
		openssl s_client -quiet -tls1 -connect smtp.gmail.com:465
			$SMTP_ANTISPAM_DELAY: seconds to wait after helper connect
...

By using it, people can tweak sendmail behavior even if sendmail invocation
is buried in some scripts.

function                                             old     new   delta
packed_usage                                       30464   30497     +33
sendmail_main                                       1185    1206     +21
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 54/0)               Total: 54 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-07 13:16:33 +02:00
Serj Kalichev
d42cdc2222 volume_id: Add support for UBIFS
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-06 18:31:01 +02:00
Denys Vlasenko
9fd61be191 libbb/xwrite: print errno on "short write" errors
Lauri Kasanen:
:: Over at TinyCore, we receive a huge number of questions of the type "I
:: got "short write", what does it mean?". Mostly for the rpi port and when
:: using bb wget.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-05 15:20:10 +02:00
Denys Vlasenko
76787a7e02 libbb/speed_table.c: survive B115200 and B230400 not fitting into 16 bits
Seen on OSX.
While at it, expand baud table with B500000..B4000000

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-01 11:44:13 +02:00
Denys Vlasenko
ef15970d7e *: placate some compile warnings on OSX
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-01 11:16:22 +02:00
Denys Vlasenko
76d72376e0 sed: fix "sed n (flushes pattern space, terminates early)" testcase failure
Patch based on work by Dengke Du <dengke.du@windriver.com>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-01 01:59:11 +02:00
Denys Vlasenko
9ff910de6b wget: treat 201,202,203 as success codes too. Closes 9211
This matches "standard" wget.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-31 13:28:53 +02:00
Denys Vlasenko
d811aaa43c sha3sum: fix config text (it's no longer only 512-bit)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-29 15:20:15 +02:00
Denys Vlasenko
71a090f187 sha3: fix to conform to final SHA3 padding standard, add -a BITS option
function                                             old     new   delta
hash_file                                            331     396     +65
md5_sha1_sum_main                                    485     538     +53
packed_usage                                       30423   30464     +41
sha3_begin                                            17      31     +14
sha3_hash                                            101     110      +9
sha3_end                                              41      49      +8

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-29 14:05:25 +02:00
Denys Vlasenko
d3d7f085eb hexdump: fix numerous bugs in handling of backslashes
Was:
	t=48\\	t=45\\	t=4c\\	t=4c\\	t=4f\\	t=0a\\
Now:
	=48=\n	=45=\n	=4c=\n	=4c=\n	=4f=\n	=0a=\n

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-26 20:14:31 +02:00
Peter Korsgaard
b6355e2bb5 udhcpc: Unconditionally call deconfig script, not only if lease is active
The udhcpc script may be used to setup fallback configuration (E.G. IPv4LL,
fixed IP address, ..) that also needs to be cleaned up on release (E.G.
when SIGUSR2 is called or on shutdown with -R), so unconditionally call
deconfig.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-26 18:46:34 +02:00
Denys Vlasenko
0dddbc1a59 build system: always rewrite NUM_APPLETS.h
Conditional rewrite can keep NUM_APPLETS.h mtime old,
this causes make to try to regenerate it at every invocation.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-23 20:21:36 +02:00
Denys Vlasenko
29483ffb07 fdisk: tweak some messages
"Total allocated sectors 2021315 greater than the maximum 2020356"

maximum what?

Turns out, that's the CHS size of the disk.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-23 17:18:45 +02:00
Denys Vlasenko
607f2b404e fdisk: print much less cryptic partition table
Before:

   Device Boot      Start         End      Blocks  Id System
/dev/sdb1   *           1         998      255471+  6 FAT16

What are "blocks"? What is that "+"?
How big is this partition?
Is start/end shown came from LBA fields or CHS fields?
Why are we torturing the user??

After:

Device  Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/sdb1 *  0,1,1       996,15,32           32     510974     510943  249M  6 FAT16

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-23 16:13:33 +02:00
Denys Vlasenko
6b76e23454 man: fix parsing of "DEFINE pager xyz". Closes 8976
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-22 21:41:05 +02:00
Denys Vlasenko
d035528261 init: fix for FreeBSD console opening. Closes 9031
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-22 20:56:58 +02:00
Denys Vlasenko
2cf9fa6e59 unshare: --network should be --net. Closes 9116
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-22 20:19:34 +02:00
Kang-Che Sung
b28897849f docs: Update filenames in keep_data_small.txt
The filenames in docs/keep_data_small.txt are a little bit outdated.
It's better to change it to the current name.

decompress_unzip.c -> decompress_gunzip.c
(since commit 774bce8e8b)
libbb/messages.c -> libbb/ptr_to_globals.c
(since commit 574f2f4394)

Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-22 20:15:50 +02:00
Denys Vlasenko
aa3576a29b hush: fix "redirects can close script fd" bug
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-22 19:54:12 +02:00
Denys Vlasenko
d8e61bbf13 build system: different fix for include/applet_tables.h/include/NUM_APPLETS.h
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-21 22:00:20 +02:00
Denys Vlasenko
de3da6bf87 wget/ssl_helper: update to wolfssl-3.9.8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-21 03:39:39 +02:00
Denys Vlasenko
7b25b1c5b2 hush: do not leak script fds into NOEXEC children
We set all opened script fds to CLOEXEC, thus making then go away
after fork+exec.
Unfortunately, CLOFORK does not exist. NOEXEC children will still see those fds open.

For one, "ls" applet is NOEXEC. Therefore running "ls -l /proc/self/fd"
in a script from standalone shell shows this:

lrwx------    1 root     root            64 Aug 20 15:17 0 -> /dev/pts/3
lrwx------    1 root     root            64 Aug 20 15:17 1 -> /dev/pts/3
lrwx------    1 root     root            64 Aug 20 15:17 2 -> /dev/pts/3
lr-x------    1 root     root            64 Aug 20 15:17 3 -> /path/to/top/level/script
lr-x------    1 root     root            64 Aug 20 15:17 4 -> /path/to/sourced/SCRIPT1
...

with as many open fds as there are ". SCRIPTn" nest levels.
Fix it by closing these fds after fork (only for NOEXEC children).

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-20 15:58:34 +02:00
Denys Vlasenko
869994cf4f hush: bit better comments in redirect code. No logic changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-20 15:16:00 +02:00
Denys Vlasenko
e9abe75fda hush: cmd and arithmetic also need the fix for FILE rewind
Discovered by running testsuite with a newest glibc

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-19 20:15:26 +02:00
Denys Vlasenko
215b0ca6e4 hush: fix a bug in FEATURE_SH_STANDALONE=y config. Closes 9186
Run this in a "sh SCRIPT":

sha256sum /dev/null
echo END

sha256sum is a NOEXEC applet. It runs in a forked child. Then child exit()s.
By this time, entire script is read, and buffered in a FILE object
from fopen("SCRIPT"). But fgetc() did not consume entire input.
exit() lseeks back by -9 bytes, from <eof> to 'e' in 'echo'.
(this may be libc-specific).
This change of fd position *is shared with the parent*!

Now parent can read more, and it thinks there is another "echo END".
End result: two "echo END"s are run.

Fix this by _exit()ing instead.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-19 18:43:06 +02:00
Denys Vlasenko
aedc3fe19f top: move free(prev_hist) out of signal path
It was seen being called recursively on repeated signals,
leading to double free

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-19 11:07:31 +02:00
Denys Vlasenko
b11be131b7 ifplugd: if SIOCSIFFLAGS fails with ENODEV, don't die
Some user managed to hit a race where iface is gone between SIOCGIFFLAGS
and SIOCSIFFLAGS (!). If SIOCSIFFLAGS fails, treat it the same as failed
SIOCGIFFLAGS

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-16 20:39:52 +02:00
Denys Vlasenko
110c6bb413 less: fix bracket search to match behavior of less 481
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-16 15:27:30 +02:00
Denys Vlasenko
252559601f less: fix SEGV
testcase: echo "" | less, then press ')' key

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-16 15:09:40 +02:00
Natanael Copa
560cf8c7eb gzip: add test that checks that -9 compresses better than -1
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-15 01:31:17 +02:00
Natanael Copa
71cfbce655 gzip: fix compression level bug. Closes 9131
fix broken logic to get the gzip_level_config value from options -1 to
-9.

This fixes an off-by-one bug that caused gzip -9 output bigger files
than the other compression levels.

It fixes so that compression level 1 to 3 are actually mapped to level 4
as comments say.

It also fixes that levels -4 to -9 is mapped to correct level and avoids
out-of-bounds access.

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-15 01:26:28 +02:00
Natanael Copa
7e6f9316a8 lineedit: trivial codeshrink for vi-mode
Introduce and use BB_isalnum_or_underscore().

function                                             old     new   delta
BB_isalnum_or_underscore                               -      43     +43
vi_word_motion                                       162     150     -12
vi_end_motion                                        163     145     -18
vi_back_motion                                       198     179     -19
BB_isalnum                                            39       -     -39
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 0/3 up/down: 43/-88)            Total: -45 bytes

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-14 23:30:29 +02:00
Denys Vlasenko
9e5820a862 build system: fix include/NUM_APPLETS.h generation
TBH, it's more like "work around my bad makefile-fu" than "fix"...

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-14 02:54:27 +02:00