emo/openrc
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Document interfaces variable useage a bit better.

Browse Source
This commit is contained in:
Roy Marples 2009-04-25 13:44:41 +00:00
parent 42580d67b8
commit f51d8d0b7d
2 changed files with 19 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
conf.d/network.Linux
View File

@ -1,27 +1,27 @@
# ifconfig under Linux is not that powerful and doesn't easily handle
# multiple addresses
# On the other hand, ip (iproute2) is quite powerful and is also supported
# ip_eth0="192.168.0.10/24; 192.168.10.10/24"
#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
# Create a bonded interface
# interfaces="bond0"
# ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
# ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
# ifdown_bond0="rmmod bonding"
#interfaces="bond0"
#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
#ifdown_bond0="rmmod bonding"
# Create a bridged interface - let dhcpcd configure the address
# interfaces="br0"
# ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
# ifdown_br0="ifconfig \$int down; btctl delbr \$int"
#interfaces="br0"
#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
# Create VLAN
# interfaces="eth0_2 eth0_3 eth0_4"
# ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
# ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
# ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
# ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
# ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
#interfaces="eth0_2 eth0_3 eth0_4"
#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
# Normally you would use wpa_supplicant to configure wireless, but you can
# use iwconfig also
# ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"
#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

7
conf.d/network.in
View File

@ -2,15 +2,16 @@
# Seperate commands with ;
# Prefix with ! to run a shell script.
# Use \$int to represent the interface
# ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
# You also have ifup_eth0 and ifdown_eth0 to run other commands when
# eth0 is started and stopped.
# You can assign a default route
# defaultroute="192.168.0.1"
#defaultroute="192.168.0.1"
# Lastly, the interfaces variable pulls in virtual interfaces that cannot
# be automatically detected.
# be automatically detected.
#interfaces="br0 bond0 vlan0"
# You can also use files instead of variables here if you like:
# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0