Commit Graph

60 Commits

Author SHA1 Message Date
William Hubbs
35f2f1ec73 Introduce the tmpfiles.dev service
This service handles setting up the tmpfiles entries for the /dev
directory for Linux systems which needs to be run in the sysinit
runlevel.
2013-07-25 13:53:44 -05:00
William Hubbs
56f1752ce1 create loopback service
The loopback service handles the basic settings for the loopback
interface, regardless of the network manager you are using.
2013-04-08 12:46:51 -05:00
Andrew Gregory
414ef64661 disable default -prefix services if MKPREFIX = yes
Certain services were not being enabled by default if PREFIX was set.
This appears to have been intended for Gentoo Prefix systems which are
indicated by MKPREFIX not PREFIX.

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-02-16 20:46:34 -06:00
William Hubbs
1a8cd5ff9d Tmpfiles: create and delete entries once in the boot runlevel.
Initially, we were creating tmpfiles entries in the sysinit runlevel and
again in the boot runlevel. Systemd runs the --create and --remove
options in one service called systemd-tmpfiles-setup after the local
file systems are mounted. Now we have a service called tmpfiles.setup
which emulates this.

This also closes the bug mentioned below, since we were originally
writing to files that were on read-only file systems and that were not
available.

Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 439012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
2012-10-31 17:33:14 -05:00
Andrew Gregory
da842085ce Fix default runlevel symlink paths
runlevels/Makefile currently uses ${PREFIX} when creating the initial
runlevel symlinks, but the init files are installed to ${INITDIR},
which results in broken symlinks if ${SYSCONFDIR} is set to something
other than ${PREFIX}/etc

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2012-10-05 14:27:00 -05:00
Robin H. Johnson
4ff71bd741 tmpfiles.d init.d scripts
Now that the tmpfiles.d code is more tested, actually call it from
init.d. It assumes that /run is already available when it runs.

Please note it runs TWICE.
- During sysinit, ideally just after /dev/shm is created, but before
  udev has started. After udev is also acceptable, but not ideal.
- During boot, ideally just after localmount has completed.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26 15:42:37 -07:00
Robin H. Johnson
ac47b6abfa runlevels: Include sysfs in the sysinit level.
net.* and module loading require sysfs now, and if udev is not in use,
it is not always loaded early enough, esp for net.lo. Force it to come
up during sysinit instead.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26 14:29:47 -07:00
William Hubbs
e641b43849 Bring Back prefix support
We now have a team member who is interested in OpenRC on prefix, so I am
bringing it back to the main tree.
2012-07-26 10:54:48 -05:00
William Hubbs
006fbdce83 fix the upstream default network stack
The OpenRC upstream default network stack was changed, but there was no
reason to change it. Now since we have the MKNET build switch, it is
easy for the gentoo ebuild to install oldnet by default.

The upstream default is newnet.
2012-07-10 12:18:06 -05:00
William Hubbs
60d6847de5 add the MKNET variable to select a network stack
The MKNET variable can be used to select the network stack you want to
build and install with OpenRC.

The current default is the gentoo "oldnet" stack. If you want to install
the OpenRC newnet stack, use MKNET=newnet on the make command line.
2012-07-10 02:39:36 -05:00
William Hubbs
ecb4d7c3f2 Revert "add the appropriate network scripts to the boot runlevel"
This reverts commit add965706a.
This commit was broken so I need to revert it.
2012-07-09 21:08:58 -05:00
William Hubbs
a1bf102591 fix typo 2012-07-09 09:12:31 -05:00
William Hubbs
add965706a add the appropriate network scripts to the boot runlevel 2012-07-08 21:10:10 -05:00
William Hubbs
3e2018f5e9 Revert "Deprecate the network and staticroute scripts"
This reverts commit 5994e55937.
There are situations where these scripts can be useful, so I am bringing
them back. Also, I want to start discussions about simplifying the
OpenRC network stack.
2012-07-08 19:51:36 -05:00
William Hubbs
3247184d86 Remove prefix support
I spoke with the prefix team sometime back and was told that they do not
have an interest in using OpenRC on prefix systems.
2012-02-21 07:27:16 -06:00
William Hubbs
79d6f10926 Improve swap handling
Modify the swap script so it starts before and stops after localmount.
Also, on linux, this script should skip mounting swap on loopback.

Add a swapfiles script which runs after localmount and is designed to
activate additional swap space which could not be activated before
localmount was run. This includes loopback swap on linux and swapfiles
which are on local file systems that were not mounted when swap was
activated initially.

The start code does reactivate swap that is already active, but this is
not an error condition.

Reported-by: Giampaolo Tomassoni <giampaolo@tomassoni.biz>
X-Gentoo-Bug: 401003
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401003
2012-02-13 08:35:29 -06:00
William Hubbs
5adb3930c7 Integrate migrate-run into bootmisc
The migrate-run service was hanging when parallel startup was enabled
because of its dependencies. This integrates the logic for this service
into bootmisc, which will avoid the issues with parallel startup.

I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his
input on this patch
2011-12-03 12:46:52 -06:00
William Hubbs
17a1529416 Migrate /var/lock and /var/run to /run for linux systems 2011-11-23 07:26:05 -06:00
William Hubbs
5994e55937 Deprecate the network and staticroute scripts
These scripts are not supported, and they have several major design
issues such as not being able to stop, start or allow a dependency on a
single interface.
2011-11-16 13:29:52 -06:00
Mike Frysinger
9a539ebbe1 further clean up OS differences in makefiles
No need for if() logic.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-20 14:32:37 -05:00
William Hubbs
9c77502f96 Make variable references in Makefiles consistent
Some variable references were written as $(foo), but the majority were
written as ${foo}. This commit changes all of the variable references
to using braces.
2011-10-19 12:22:23 -05:00
William Hubbs
ecf77254bb consolodate Makefiles
The tree contained many operating system specific Makefiles which were
being included in other Makefiles. This commit removes those and adds
the code to the makefiles which included them using make's conditional
processing.

X-Gentoo-Bug: 387441
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
2011-10-18 03:23:00 -05:00
Roy Marples
9f4a7afd83 Add staticroute to the boot runlevel 2009-10-16 09:25:08 +01:00
Roy Marples
b70501ef45 Go back to git 2009-04-30 15:05:39 +01:00
Roy Marples
6027b0ed7d Add a new init script - network
This simply assigns static addresses and an optional default route.
It's possible to add external commands as well, so to create a bonded interface.

Hopefully we can add a few examples to satisfy most of the old net.lo, which
is no longer installed into boot by default.
2009-04-16 23:47:23 +00:00
Roy Marples
38e6c9ba5c make ignore now configures the sv:ignore property. 2008-12-04 12:38:23 +00:00
Roy Marples
df22978de9 Punt halt init script. sysvinit should install it. See Gentoo bug #246502 on how to handle this. 2008-11-12 16:28:07 +00:00
Roy Marples
42e6a95b1d Move romount to mount-ro and use the umount -r option as it's more reliable for / --bind mounts, Gentoo #239922. Thanks to Duncan. 2008-11-04 11:30:15 +00:00
Roy Marples
0af7d5bc20 Add a new shutdown runlevel, Gentoo #224537.
Split halt.sh into halt, killprocs, romount and savecache services.
The reboot runlevel is removed but mapped to shutdown.
The halt script should be moved to the sysvinit package.
2008-11-03 15:31:01 +00:00
Roy Marples
d6da8e8c48 sysinit is now a real runlevel that handles things like udev, dmesg and
mounting various bits in /dev and /sys.
init.sh JUST mounts /lib/rc/init.d (and /proc for Linux systems)
To make development of this easier we now return an empty RC_STRINGLIST
instead of a NULL for empty things.

If you don't have a udev init script installed, don't reboot your box OR
roll back to an older OpenRC version.
2008-10-10 08:37:21 +00:00
Roy Marples
0f51f3e863 We should add devdb to boot. 2008-05-12 15:13:35 +00:00
Roy Marples
5e8ed2aeca Tweak install of runlevels. 2008-03-27 19:55:03 +00:00
Roy Marples
d09f9f47eb Split terminal encoding out. 2008-03-27 13:49:49 +00:00
Roy Marples
4f4b74e110 Check the right dir for installed scripts. 2008-03-26 04:48:39 +00:00
Roy Marples
a99b8d349c SYSCONFDIR should already be prefixed. 2008-03-25 17:09:56 +00:00
Roy Marples
a2a7f0740e Install swap-blk on NetBSD. 2008-03-25 16:40:49 +00:00
Roy Marples
55eb3794fb Rework our folder structure so that we don't have OS specific dirs, making it easier to share init and conf files per OS. 2008-03-25 14:06:05 +00:00
Mike Frysinger
9ed5d28d15 add check/test rules 2008-03-24 06:10:40 +00:00
Roy Marples
a689b66023 Add tunable SYSCONFDIR 2008-03-05 12:27:11 +00:00
Roy Marples
6caea225d8 mixer doesn't work on all platforms. 2008-03-04 00:41:05 +00:00
Roy Marples
9a1f3768a5 Not all fbsd systems support powerd. 2008-03-03 22:09:39 +00:00
Roy Marples
7a8e9d4ddb Add a gitignore make target. 2008-03-03 13:04:08 +00:00
Roy Marples
67c5fd6bb8 Ensure that our scripts call prefixed runscript. 2008-03-02 21:14:01 +00:00
Roy Marples
a135d0d93b Fix installing into PREFIX. 2008-03-01 22:12:33 +00:00
Roy Marples
36846d4bbb BSD's now mount swap block devices early incase fsck needs it. 2008-03-01 10:39:36 +00:00
Roy Marples
e687cc1e79 Remove the over-engineered checkfs and checkroot scripts and replace with simple fsck, root and mtab scripts. Update dependencies accordingly. 2008-01-31 16:10:18 +00:00
Roy Marples
0ec43dfe47 These are FreeBSD specific 2008-01-11 22:29:12 +00:00
Roy Marples
bcbdb0ed13 Add wscons script. We still need to convert this to a conf.d format. 2008-01-11 19:19:33 +00:00
Roy Marples
28afeac09e Add sys.mk to define system locations. 2008-01-11 16:03:38 +00:00
Roy Marples
13c552c3ec Allow OS to define default package locations. 2008-01-11 10:55:36 +00:00