Quite a bit of work happened in baselayout-1 on the ccwgroup module, but
seems it didn't make it into openrc. So forward port all the existing
code so we can work with more than just qeth and layer2 options.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If there were no extra commands, rc_service_extra_commands returned a
list containing a single empty string. This changes that to return an
empty list, which is more consistent with what you would expect.
X-Gentoo-Bug: 360013
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360013
This function was returning the setting of the variable $opts, which is
not correct. $opts was used in baselayout-1, but it is replaced by
$extra_commands and $extra_started_commands in openrc.
This does not appear to break backward compatibility since this function
does not appear to be used anywhere in the openrc code.
Thanks to James Le Cuirot for the original patch.
X-Gentoo-Bug: 360013
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360013
This updates the udhcpc support to use busybox's udhcpc instead of the
stand alone version.
I would like to thank jackieku <kjackie@gmail.com> for assisting with
this update.
X-Gentoo-Bug: 205286
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=205286
This was added back due to a user request. It will always be on a line
of its ownbecause I'm considering adding more verbose info messages to
local that show when each service is run if local is run with the -v
option.
X-Gentoo-Bug: 363343
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363343
- Add support for a global plug_timeout setting to match the
documentation.
- Update the documentation to also show per-interface configuration.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This rearranges the configuration files so it is more clear that the
rc_sys setting is system specific.
X-Gentoo-Bug: 363957
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363957
The use of /proc/bus/usb to mount usbfs has been deprecated, but
the option is still available in the kernel. The new approach is
to use /sys. We should not modprobe usbcore if either /proc/bus/usb
or /sys/module/usbcore exist.
X-Gentoo-Bug: 363551
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363551
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
This is being done because these dependency changes caused a regression.
We will need to revisit the previously mentioned bug.
X-Gentoo-Bug: 363693
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363693
For most situations, the loopback interface can depend on root instead
of localmount, so this patch makes that happen. It also adds comments to
the net.example files explaining when a user might want to change this
and giving an example.
I would like to thank Robin Johnson for the original patch and suggested
examples.
X-Gentoo-Bug: 292894
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=292894
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Add support for optional fallback_routes_* variables in the network scripts.
This is similar to the fallback_route_* support in baselayout-1.
However, if you do not have fallback_routes set for an interface but you
do have routes set, that setting will be used, so you do not need this
variable unless you want the fallback routes to be different from the
primary routes.
X-Gentoo-Bug: 250978
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=250978
It is possible for bootmisc to take longer than 60 seconds to complete
and services should not time out waiting for it.
X-Gentoo-Bug: 360405
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360405
This is primarily for users with set_name_type settings from previous
sysadmins can easily see what changes to make.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Make sure that the `cd` into the $dir actually happened. This we don't
have to worry about relative paths deleting stuff it shouldn't. This
step shouldn't fail, but who knows, and better to be sane than to wipe
out someone's valuables.
When wiping, automatically fall back to a dedicated `find` if the initial
`rm` failed on us. This should help with the speed issues related to the
later `find`.
Have the later find only search the top level allowing `rm` to walk the
directory contents. This means that -xdev no longer applies, but since
the earlier `rm` wasn't doing -xdev either and no one has complained thus
far, let's assume it isn't an issue. Also convert to the -exec...+ form
so that we don't have to worry about long argument lists, and add -- to
the `rm` that was previously missing. In practice, this shouldn't matter
as we've already deleted all those files, but better safe than sorry.
When cleaning, since we've already done a `cd` into the $dir, no point in
prefixing all the paths with $dir too. Go with the relative loving.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
X-Gentoo-Bug: 359831
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=359831
The previous test assumed that we could always rely on the minor fault
counter to change between reads of /proc/self/stat, but we found that
this is not the case.
The new test compares two reads of /proc/self/environ for which we have
set the same environment variable to two different values.
If the comparison shows the two reads have the same contents, we know
that /proc is not working.
I would like to thank Robin Johnson and Mike Frysinger for their input
for this patch.
X-Gentoo-Bug: 348416
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=348416
The documentation makes a recommendation for the setting but does not
state the purpose of the variable.
X-Gentoo-Bug: 357869
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357869
Originally the plan was to deprecate this code, but this will not be
happening. There are some subsystems which can still be autodetected, so
we are keeping this code and allowing users to override the automatic
detection with this variable as well as set it to other subtypes we
cannot autodetect.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
X-Gentoo-Bug: 359311
X-Gentoo-Bug-URL: http://bugs.gentoo.org/359311
Reported-by: Raffaello D. Di Napoli <fastijum@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The default rc_sys behavior was changed to always require manual
intervention by users. This pretty much breaks all of the diff
system variants out there if people don't explicitly edit their
rc.conf file ahead of time. We should have things work "out of
the box" as much as possible and reasonable.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/357247
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since mount-ro needs to run unconditionally, we need to have savecache
report that it ran successfully when the system is shutting down.
X-Gentoo-Bug: 356393
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=356393
This allows the default value of rc_sys to be set when openrc is
compiled. This will allow openrc to be installed, e.g. on vserver guests
and will allow them to be rebooted without the need to edit rc.conf.
This patch is a combined effort between myself and Robin Johnson.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
Implement a consistent interface for changing ethtool parameters, as
suggested in bug 195479. All variable names are based on the long option
to ethtool to set each group of parameters. Multiple entries seperated
by newlines are permitted for variable values.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 195479
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for
the ip tunnel call.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 347657
This replaces the vlan setup code that previously used the old vconfig
binary with a new implementation using the iproute2 interface.
vconfig does not handle many of the newer setups. No automatic migration
path is provided, as altering the configuration is non-trivial.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Written-by: Guillaume Castagnino <casta@xwing.info>
X-Gentoo-Bug: 346365
This reworks the implementation of the --applet option so that it is
processed in run_applets() and does not require two calls to the
getopts_long() function. It is based on code by Robin Johnson and Chris
Richards.
X-Gentoo-Bug: 351712
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=351712
