procps/po/de.po

# German translation of procps-ng.
# Copyright (C) 2014 Free Software Foundation, Inc.
# This file is distributed under the same license as the procps-ng package.
#
# Mario Blättermann <mario.blaettermann@gmail.com>, 2014, 2017, 2019, 2021.
msgid ""
msgstr ""
"Project-Id-Version: procps-ng-3.3.17rc1\n"
"Report-Msgid-Bugs-To: procps@freelists.org\n"
"POT-Creation-Date: 2022-10-04 10:57+1100\n"
"PO-Revision-Date: 2021-01-24 13:12+0100\n"
"Last-Translator: Mario Blättermann <mario.blaettermann@gmail.com>\n"
"Language-Team: German <translation-team-de@lists.sourceforge.net>\n"
"Language: de\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Generator: Lokalize 20.12.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: local/fileutils.c:38
msgid "write error"
msgstr "Schreibfehler"

#: src/free.c:76 src/slabtop.c:104 src/uptime.c:61
#, c-format
msgid " %s [options]\n"
msgstr " %s [OPTIONEN]\n"

#: src/free.c:78
msgid " -b, --bytes         show output in bytes\n"
msgstr " -b, --bytes         Ausgabe in Byte anzeigen\n"

#: src/free.c:79
msgid "     --kilo          show output in kilobytes\n"
msgstr "     -k, --kilo      Ausgabe in Kilobyte anzeigen\n"

#: src/free.c:80
msgid "     --mega          show output in megabytes\n"
msgstr "     -m, --mega      Ausgabe in Megabyte anzeigen\n"

#: src/free.c:81
msgid "     --giga          show output in gigabytes\n"
msgstr "     -g, --giga      Ausgabe in Gigabyte anzeigen\n"

#: src/free.c:82
msgid "     --tera          show output in terabytes\n"
msgstr "     --tera          Ausgabe in Terabyte anzeigen\n"

#: src/free.c:83
msgid "     --peta          show output in petabytes\n"
msgstr "     --peta          Ausgabe in Petabyte anzeigen\n"

#: src/free.c:84
msgid " -k, --kibi          show output in kibibytes\n"
msgstr " -k, --kibi          Ausgabe in Kibibyte anzeigen\n"

#: src/free.c:85
msgid " -m, --mebi          show output in mebibytes\n"
msgstr " -m, --mebi          Ausgabe in Mebibyte anzeigen\n"

#: src/free.c:86
msgid " -g, --gibi          show output in gibibytes\n"
msgstr " -g, --gibi          Ausgabe in Gibibyte anzeigen\n"

#: src/free.c:87
msgid "     --tebi          show output in tebibytes\n"
msgstr "     --tebi          Ausgabe in Tebibyte anzeigen\n"

#: src/free.c:88
msgid "     --pebi          show output in pebibytes\n"
msgstr "     --pebi          Ausgabe in Pebibyte anzeigen\n"

#: src/free.c:89
msgid " -h, --human         show human-readable output\n"
msgstr " -h, --human         menschenlesbare Ausgabe\n"

#: src/free.c:90
msgid "     --si            use powers of 1000 not 1024\n"
msgstr "     --si            Potenzen von 1000 und nicht 1024 verwenden\n"

#: src/free.c:91
msgid " -l, --lohi          show detailed low and high memory statistics\n"
msgstr ""
" -l, --lohi          detaillierte Statistiken für hohe und niedrige\n"
"                     Speicherbelegung anzeigen\n"

#: src/free.c:92
msgid " -t, --total         show total for RAM + swap\n"
msgstr " -t, --total         Gesamtgröße von RAM + Swap anzeigen\n"

#: src/free.c:93
msgid " -v, --committed     show committed memory and commit limit\n"
msgstr ""

#: src/free.c:94
msgid " -s N, --seconds N   repeat printing every N seconds\n"
msgstr " -s N, --seconds N   Ausgabe alle N Sekunden wiederholen\n"

#: src/free.c:95
msgid " -c N, --count N     repeat printing N times, then exit\n"
msgstr " -c N, --count N     Ausgabe N-mal wiederholen, dann beenden\n"

#: src/free.c:96
msgid " -w, --wide          wide output\n"
msgstr " -w, --wide          breite Ausgabe\n"

#: src/free.c:98 src/w.c:533
msgid "     --help     display this help and exit\n"
msgstr "      --help     diese Hilfe anzeigen und beenden\n"

#: src/free.c:173
#, fuzzy
msgid "Multiple unit options don't make sense."
msgstr "Mehrere Einheitenoptionen ergeben keinen Sinn."

#: src/free.c:338
#, c-format
msgid "seconds argument `%s' is not positive number"
msgstr "Sekunden-Argument »%s« ist keine positive Zahl"

#: src/free.c:344
msgid "failed to parse count argument"
msgstr "Anzahl im Argument konnte nicht verarbeitet werden"

#: src/free.c:347
#, c-format
msgid "failed to parse count argument: '%s'"
msgstr "Anzahl im Argument konnte nicht verarbeitet werden: »%s«"

#: src/free.c:367
msgid "Memory information file /proc/meminfo does not exist"
msgstr ""

#: src/free.c:370 src/vmstat.c:382 src/vmstat.c:869
#, fuzzy
msgid "Unable to create meminfo structure"
msgstr "IPC-Pipes konnten nicht angelegt werden"

#: src/free.c:377
#, fuzzy, c-format
msgid ""
"               total        used        free      shared     buffers       "
"cache   available"
msgstr ""
"              gesamt       benutzt     frei      gemeins.   Puffer        "
"Cache   verfügbar"

#: src/free.c:379
#, fuzzy, c-format
msgid ""
"               total        used        free      shared  buff/cache   "
"available"
msgstr ""
"              gesamt       benutzt     frei      gemns.  Puffer/Cache "
"verfügbar"

#: src/free.c:382
msgid "Mem:"
msgstr "Speicher:"

#: src/free.c:405
msgid "Low:"
msgstr "Niedrig:"

#: src/free.c:411
msgid "High:"
msgstr "Hoch:"

#: src/free.c:418
msgid "Swap:"
msgstr "Swap:"

#: src/free.c:425
msgid "Total:"
msgstr "Gesamt:"

#: src/free.c:438
msgid "Comm:"
msgstr ""

#: src/kill.c:38
#, c-format
msgid " %s [options] <pid> [...]\n"
msgstr " %s [Optionen] <pid> […]\n"

#: src/kill.c:40
msgid " <pid> [...]            send signal to every <pid> listed\n"
msgstr " <pid> […]              Signal an alle aufgelisteten <pids> senden\n"

#: src/kill.c:41
msgid ""
" -<signal>, -s, --signal <signal>\n"
"                        specify the <signal> to be sent\n"
msgstr ""
" -<Signal>, -s, --signal <Signal>\n"
"                        das zu sendende <Signal> angeben\n"

#: src/kill.c:43
msgid " -q, --queue <value>    integer value to be sent with the signal\n"
msgstr ""
" -q, --queue <Wert>     Ganzzahlwert, der mit dem Signal gesendet\n"
"                          werden soll\n"

#: src/kill.c:44
msgid ""
" -l, --list=[<signal>]  list all signal names, or convert one to a name\n"
msgstr ""
" -l, --list=[<Signal>]  alle Signalnamen auflisten oder eines\n"
"                        in einen Namen konvertieren\n"

#: src/kill.c:45
msgid " -L, --table            list all signal names in a nice table\n"
msgstr ""
" -L, --table            alle Signalnamen in einer Tabelle\n"
"                        auflisten\n"

#: src/kill.c:110
#, c-format
msgid "unknown signal name %s"
msgstr "Unbekannter Signalname %s"

#: src/kill.c:129
msgid "must be an integer value to be passed with the signal."
msgstr "Mit dem Signal zu übergebender Wert muss eine Ganzzahl sein."

#: src/kill.c:134
#, c-format
msgid "invalid argument %c"
msgstr "ungültiges Argument %c"

#: src/kill.c:144 src/pgrep.c:740 src/pidof.c:243 src/pidof.c:283
#: src/sysctl.c:865
msgid "internal error"
msgstr "Interner Fehler"

#: src/kill.c:156 src/pmap.c:765 src/pmap.c:780 src/skill.c:375 src/skill.c:459
#: src/tload.c:135 src/tload.c:140 src/vmstat.c:1044 src/vmstat.c:1054
#: src/watch.c:870 src/watch.c:882
msgid "failed to parse argument"
msgstr "Argument konnte nicht eingelesen werden"

#: src/pgrep.c:85 src/pidof.c:37 src/skill.c:70
msgid "integer overflow"
msgstr "Ganzzahlüberlauf"

#: src/pgrep.c:147
#, c-format
msgid " %s [options] <pattern>\n"
msgstr " %s [Optionen] <Muster>\n"

#: src/pgrep.c:151
msgid " -d, --delimiter <string>  specify output delimiter\n"
msgstr " -d, --delimiter <String>  Trennzeichen für Ausgabe festlegen\n"

#: src/pgrep.c:152
msgid " -l, --list-name           list PID and process name\n"
msgstr " -l, --list-name           PID und Prozessname auflisten\n"

#: src/pgrep.c:153
msgid " -a, --list-full           list PID and full command line\n"
msgstr ""
" -a, --list-full           PID und vollständige Befehlszeile auflisten\n"

#: src/pgrep.c:154
msgid " -v, --inverse             negates the matching\n"
msgstr " -v, --inverse             Übereinstimmung negieren\n"

#: src/pgrep.c:155
msgid " -w, --lightweight         list all TID\n"
msgstr " -w, --lightweight         alle Thread-IDs auflisten\n"

#: src/pgrep.c:158
msgid " -<sig>, --signal <sig>    signal to send (either number or name)\n"
msgstr " -<sig>, --signal <sig>    zu sendendes Signal (Zahl oder Name)\n"

#: src/pgrep.c:159
msgid " -q, --queue <value>       integer value to be sent with the signal\n"
msgstr ""
" -q, --queue <Wert>        Ganzzahlwert, der mit dem Signal gesendet\n"
"                             werden soll\n"

#: src/pgrep.c:160
msgid " -e, --echo                display what is killed\n"
msgstr " -e, --echo                anzeigen, was abgewürgt wird\n"

#: src/pgrep.c:163
msgid " -e, --echo                display PIDs before waiting\n"
msgstr " -e, --echo                zeigt PIDs vor dem Warten an\n"

#: src/pgrep.c:167
msgid " -c, --count               count of matching processes\n"
msgstr " -c, --count               Anzahl der gefundenen Prozesse\n"

#: src/pgrep.c:168
msgid " -f, --full                use full process name to match\n"
msgstr " -f, --full                nach vollem Prozessnamen suchen\n"

#: src/pgrep.c:169
msgid " -g, --pgroup <PGID,...>   match listed process group IDs\n"
msgstr ""
" -g, --pgroup <PGID, …>    nach aufgelisteten Prozessgruppen-IDs suchen\n"

#: src/pgrep.c:170
msgid " -G, --group <GID,...>     match real group IDs\n"
msgstr " -G, --group <GID, …>      reale Gruppenkennungen suchen\n"

#: src/pgrep.c:171
msgid " -i, --ignore-case         match case insensitively\n"
msgstr " -i, --ignore-case         Groß-/Kleinschreibung nicht beachten\n"

#: src/pgrep.c:172
msgid " -n, --newest              select most recently started\n"
msgstr " -n, --newest              zuletzt gestartete auswählen\n"

#: src/pgrep.c:173
msgid " -o, --oldest              select least recently started\n"
msgstr " -o, --oldest              zuerst gestartete auswählen\n"

#: src/pgrep.c:174
msgid " -O, --older <seconds>     select where older than seconds\n"
msgstr ""
" -O, --older <Sekunden>    wählt aus, was älter als die angegebene\n"
"                             Anzahl Sekunden ist\n"

#: src/pgrep.c:175
msgid ""
" -P, --parent <PPID,...>   match only child processes of the given parent\n"
msgstr ""
" -P, --parent <PPID,...>   nur Kindprozesse des angegebenen\n"
"                           Elternprozesses berücksichtigen\n"

#: src/pgrep.c:176
msgid " -s, --session <SID,...>   match session IDs\n"
msgstr " -s, --session <SID, …>    Sitzungskennungen suchen\n"

#: src/pgrep.c:177
msgid " -t, --terminal <tty,...>  match by controlling terminal\n"
msgstr " -t, --terminal <tty, …>   nach steuerndem Terminal suchen\n"

#: src/pgrep.c:178
msgid " -u, --euid <ID,...>       match by effective IDs\n"
msgstr " -u, --euid <ID, …>        nach effektiven IDs suchen\n"

#: src/pgrep.c:179
msgid " -U, --uid <ID,...>        match by real IDs\n"
msgstr " -U, --uid <ID, …>         nach realen IDs suchen\n"

#: src/pgrep.c:180
msgid " -x, --exact               match exactly with the command name\n"
msgstr " -x, --exact               exakte Übereinstimmung des Befehlsnamens\n"

#: src/pgrep.c:181
msgid " -F, --pidfile <file>      read PIDs from file\n"
msgstr " -F, --pidfile <Datei>     PIDs aus einer Datei lesen\n"

#: src/pgrep.c:182
msgid " -L, --logpidfile          fail if PID file is not locked\n"
msgstr ""
" -L, --logpidfile          Fehlschlag, wenn PID-Datei nicht gesperrt ist\n"

#: src/pgrep.c:183
msgid " -r, --runstates <state>   match runstates [D,S,Z,...]\n"
msgstr " -r, --runstates <Status>   nach Runstatus suchen [D,S,Z,...]\n"

#: src/pgrep.c:184
msgid " -A, --ignore-ancestors    exclude our ancestors from results\n"
msgstr ""

#: src/pgrep.c:185
#, fuzzy
msgid " --cgroup <grp,...>        match by cgroup v2 names\n"
msgstr " -G, --group <GID, …>      reale Gruppenkennungen suchen\n"

#: src/pgrep.c:186
msgid ""
" --ns <PID>                match the processes that belong to the same\n"
"                           namespace as <pid>\n"
msgstr ""
" --ns <PID>                nach Prozessen suchen, die zum gleichen\n"
"                           Namensraum wie <PID> gehören\n"

#: src/pgrep.c:188
msgid ""
" --nslist <ns,...>         list which namespaces will be considered for\n"
"                           the --ns option.\n"
"                           Available namespaces: ipc, mnt, net, pid, user, "
"uts\n"
msgstr ""
" --nslist <ns,...>         Namensräume auflisten, die in der Option --ns\n"
"                           berücksichtigt werden.\n"
"                           Verfügbare Namensräume: ipc, mnt, net, pid, user, "
"uts\n"

#: src/pgrep.c:213 src/pgrep.c:650 src/w.c:405
#, fuzzy
msgid "Unable to create pid info structure"
msgstr "IPC-Pipes konnten nicht angelegt werden"

#: src/pgrep.c:377
#, c-format
msgid "invalid user name: %s"
msgstr "Ungültiger Benutzername: %s"

#: src/pgrep.c:394
#, c-format
msgid "invalid group name: %s"
msgstr "Ungültiger Gruppenname: %s"

#: src/pgrep.c:405
#, c-format
msgid "invalid process group: %s"
msgstr "Ungültige Prozessgruppe: %s"

#: src/pgrep.c:417
#, c-format
msgid "invalid session id: %s"
msgstr "Ungültige Sitzungs-ID: %s"

#: src/pgrep.c:429
#, c-format
msgid "not a number: %s"
msgstr "Keine Zahl: %s"

#: src/pgrep.c:496 src/skill.c:158
#, fuzzy
msgid "Unable to read process namespace information"
msgstr "Fehler beim Lesen der Informationen für Referenz-Namensraum"

#: src/pgrep.c:583
#, fuzzy, c-format
msgid "regex error: %s"
msgstr "Fehler: %s\n"

#: src/pgrep.c:645
msgid "Error reading reference namespace information\n"
msgstr "Fehler beim Lesen der Informationen für den Referenz-Namensraum\n"

#: src/pgrep.c:757
#, c-format
msgid ""
"pattern that searches for process name longer than 15 characters will result "
"in zero matches\n"
"Try `%s -f' option to match against the complete command line."
msgstr ""

#: src/pgrep.c:1025
#, c-format
msgid ""
"-L without -F makes no sense\n"
"Try `%s --help' for more information."
msgstr ""
"-L ohne -F ergibt keinen Sinn.\n"
"Rufen Sie »%s --help« auf für weitere Informationen."

#: src/pgrep.c:1032
#, c-format
msgid ""
"pidfile not valid\n"
"Try `%s --help' for more information."
msgstr ""
"pidfile ist ungültig\n"
"Rufen Sie »%s --help« auf für weitere Informationen."

#: src/pgrep.c:1041
#, c-format
msgid ""
"only one pattern can be provided\n"
"Try `%s --help' for more information."
msgstr ""
"nur ein Muster kann angegeben werden\n"
"Rufen Sie »%s --help« auf für weitere Informationen."

#: src/pgrep.c:1045
#, c-format
msgid ""
"no matching criteria specified\n"
"Try `%s --help' for more information."
msgstr ""
"keine Übereinstimmungskriterien angegeben\n"
"Rufen Sie »%s --help« auf für weitere Informationen."

#: src/pgrep.c:1097
#, c-format
msgid "%s killed (pid %lu)\n"
msgstr "%s abgewürgt (PID %lu)\n"

#: src/pgrep.c:1104
#, c-format
msgid "killing pid %ld failed"
msgstr "Abwürgen von Prozess-ID %ld fehlgeschlagen"

#: src/pgrep.c:1116
#, c-format
msgid "waiting for %s (pid %lu)\n"
msgstr "Warten auf %s (PID %lu)\n"

#: src/pgrep.c:1120
msgid "pidfd_open() not implemented in Linux < 5.3"
msgstr ""

#: src/pgrep.c:1123
#, c-format
msgid "opening pid %ld failed"
msgstr "Öffnen von %ld ist fehlgeschlagen"

#: src/pgrep.c:1137
msgid "epoll_wait failed"
msgstr "epoll_wait ist fehlgeschlagen"

#: src/pidof.c:71
#, c-format
msgid " %s [options] [program [...]]\n"
msgstr " %s [Optionen] [Programm […]]\n"

#: src/pidof.c:73
msgid " -s, --single-shot         return one PID only\n"
msgstr " -s, --single-shot         nur eine PID zurückgeben\n"

#: src/pidof.c:74
msgid " -c, --check-root          omit processes with different root\n"
msgstr ""
" -c, --check-root          Prozesse mit anderer Systemwurzel auslassen\n"

#: src/pidof.c:75
msgid " -q,                       quiet mode, only set the exit code\n"
msgstr " -q,                       stiller Modus, setzt nur den Exit-Code\n"

#: src/pidof.c:76
msgid " -w, --with-workers        show kernel workers too\n"
msgstr " -w, --with-workers        zeigt auch Kernel-Arbeitsthreads\n"

#: src/pidof.c:77
msgid " -x                        also find shells running the named scripts\n"
msgstr ""
" -x                        auch nach Shells suchen, in denen die\n"
"                           benannten Skripte laufen\n"

#: src/pidof.c:78
msgid " -o, --omit-pid <PID,...>  omit processes with PID\n"
msgstr ""
" -o, --omit-pid <PID, …>   Prozesse mit den angegebenen PID(s)\n"
"                           auslassen\n"

#: src/pidof.c:79
msgid " -S, --separator SEP       use SEP as separator put between PIDs"
msgstr " -S, --separator TRENNER   diesen TRENNER zwischen PIDs setzen"

#: src/pidof.c:286
#, c-format
msgid "illegal omit pid value (%s)!\n"
msgstr "Ungültiger Wert für auszulassende PID (%s)!\n"

#: src/pmap.c:68
msgid "Address"
msgstr "Adresse"

#: src/pmap.c:69
msgid "Offset"
msgstr "Versatz"

#: src/pmap.c:70
msgid "Device"
msgstr "Gerät"

#: src/pmap.c:71
msgid "Mapping"
msgstr "Zuordnung"

#: src/pmap.c:75
msgid "Perm"
msgstr "Zugr"

#: src/pmap.c:76
msgid "Inode"
msgstr "Inode"

#: src/pmap.c:79
msgid "Kbytes"
msgstr "kByte"

#: src/pmap.c:80
msgid "Mode"
msgstr "Modus"

#. Translation Hint: With the next 5 fields, notice how an extra space
#. has been added ahead of one 'KiB' so that they all
#. align. You need not preserve such alignment.
#. Translation Hint: maximum 'RSS' = 6
#: src/pmap.c:81 src/top/top_nls.c:330
msgid "RSS"
msgstr "RSS"

#: src/pmap.c:82
msgid "Dirty"
msgstr "Dirty"

#: src/pmap.c:116
#, c-format
msgid " %s [options] PID [PID ...]\n"
msgstr " %s [Optionen] PID [PID …]\n"

#: src/pmap.c:118
msgid " -x, --extended              show details\n"
msgstr " -x, --extended              Details anzeigen\n"

#: src/pmap.c:119
msgid " -X                          show even more details\n"
msgstr " -X                          noch mehr Details anzeigen\n"

#: src/pmap.c:120
msgid "            WARNING: format changes according to /proc/PID/smaps\n"
msgstr "            WARNUNG: Formatänderung entsprechend /proc/PID/smaps\n"

#: src/pmap.c:121
msgid " -XX                         show everything the kernel provides\n"
msgstr ""
" -XX                         alles zeigen, was der Kernel bereitstellt\n"

#: src/pmap.c:122
msgid " -c, --read-rc               read the default rc\n"
msgstr " -c, --read-rc               Standard-Konfigurationsdatei einlesen\n"

#: src/pmap.c:123
msgid " -C, --read-rc-from=<file>   read the rc from file\n"
msgstr " -C, --read-rc-from=<Datei>   Konfiguration aus Datei einlesen\n"

#: src/pmap.c:124
msgid " -n, --create-rc             create new default rc\n"
msgstr " -n, --create-rc             neue Standardkonfiguration erzeugen\n"

#: src/pmap.c:125
msgid " -N, --create-rc-to=<file>   create new rc to file\n"
msgstr ""
" -N, --create-rc-to=<Datei>  neue Standardkonfiguration\n"
"                             in Datei erzeugen\n"

#: src/pmap.c:126
msgid "            NOTE: pid arguments are not allowed with -n, -N\n"
msgstr "            NOTE: PID-Argumente sind mit -n, -N nicht erlaubt\n"

#: src/pmap.c:127
msgid " -d, --device                show the device format\n"
msgstr " -d, --device                das Geräteformat anzeigen\n"

#: src/pmap.c:128
msgid " -q, --quiet                 do not display header and footer\n"
msgstr " -q, --quiet                 Kopf- und Fußzeile nicht anzeigen\n"

#: src/pmap.c:129
msgid " -p, --show-path             show path in the mapping\n"
msgstr " -p, --show-path             Pfad in der Zuweisung anzeigen\n"

#: src/pmap.c:130
msgid " -A, --range=<low>[,<high>]  limit results to the given range\n"
msgstr ""
" -A, --range=<von>[,<bis>]   Ergebnisse auf den angegebenen Bereich\n"
"                             beschränken\n"

#: src/pmap.c:211
msgid "shared memory detach"
msgstr ""

#: src/pmap.c:216
msgid "shared memory remove"
msgstr ""

#: src/pmap.c:241
msgid "  [ anon ]"
msgstr "  [ anon ]"

#: src/pmap.c:244
msgid "  [ stack ]"
msgstr "  [ stack ]"

#: src/pmap.c:330 src/pmap.c:336
msgid "Unknown format in smaps file!"
msgstr "Unbekanntes Format in smaps-Datei!"

#: src/pmap.c:361
#, fuzzy
msgid "ERROR: memory allocation failed"
msgstr "Speicherzuweisung ist gescheitert"

#: src/pmap.c:378
msgid "inconsistent detail field in smaps file, line:\n"
msgstr "Inkonsistentes Detail-Feld in smaps-Datei, Zeile:\n"

#: src/pmap.c:725
msgid "total kB"
msgstr "kB gesamt"

#: src/pmap.c:736
#, c-format
msgid "mapped: %ldK    writeable/private: %ldK    shared: %ldK\n"
msgstr ""

#. Translation Hint: keep total string length
#. * as 24 characters. Adjust %16 if needed
#: src/pmap.c:745
#, c-format
msgid " total %16ldK\n"
msgstr " gesamt %16ldK\n"

#. Translation Hint: keep total string length
#. * as 16 characters. Adjust %8 if needed
#: src/pmap.c:751
#, c-format
msgid " total %8ldK\n"
msgstr " gesamt %8ldK\n"

#: src/pmap.c:826
#, c-format
msgid "config line too long - line %d"
msgstr "Konfigurationszeile ist zu lang - Zeile %d"

#: src/pmap.c:851
#, c-format
msgid "unsupported section found in the config - line %d"
msgstr ""
"nicht unterstützter Abschnitt in Konfigurationsdatei gefunden - Zeile %d"

#: src/pmap.c:854 src/pmap.c:865 src/pmap.c:876 src/pmap.c:895 src/pmap.c:907
#, c-format
msgid "syntax error found in the config - line %d"
msgstr "Syntaxfehler in der Konfigurationsdatei - Zeile %d"

#: src/pmap.c:929
msgid "the file already exists - delete or rename it first"
msgstr "die Datei existiert bereits - bitte zuerst löschen oder umbenennen"

#: src/pmap.c:992
msgid "HOME variable undefined"
msgstr "HOME-Variable ist nicht definiert"

#: src/pmap.c:1000
msgid "memory allocation failed"
msgstr "Speicherzuweisung ist gescheitert"

#: src/pmap.c:1051
msgid "option -r is ignored as SunOS compatibility"
msgstr "Option -r wird wegen SunOS-Kompatibilität ignoriert"

#: src/pmap.c:1098
msgid "options -c, -C, -d, -n, -N, -x, -X are mutually exclusive"
msgstr ""
"die Optionen -c, -C, -d, -n, -N, -x und -X schließen sich gegenseitig aus"

#: src/pmap.c:1101
msgid "options -p, -q are mutually exclusive with -n, -N"
msgstr ""
"die Optionen -p und -q können nicht zusammen mit -n, -N verwendet werden"

#: src/pmap.c:1104 src/pmap.c:1153
msgid "too many arguments"
msgstr "Zu viele Argumente"

#: src/pmap.c:1108
msgid "rc file successfully created, feel free to edit the content"
msgstr ""
"Konfigurationsdatei wurde erfolgreich erstellt, Sie können nun deren Inhalt "
"bearbeiten"

#: src/pmap.c:1111
msgid "couldn't create the rc file"
msgstr "Konfigurationsdatei konnte nicht angelegt werden"

#: src/pmap.c:1123
#, c-format
msgid "~/.%src file successfully created, feel free to edit the content"
msgstr ""
"Datei ~/.%src wurde erfolgreich erstellt, Sie können nun deren Inhalt "
"bearbeiten"

#: src/pmap.c:1126
#, c-format
msgid "couldn't create ~/.%src"
msgstr "~/.%src konnte nicht angelegt werden"

#: src/pmap.c:1131
msgid "argument missing"
msgstr "Fehlendes Argument"

#: src/pmap.c:1144
msgid "couldn't read the rc file"
msgstr "Konfigurationsdatei konnte nicht gelesen werden"

#: src/pmap.c:1146
#, c-format
msgid "couldn't read ~/.%src"
msgstr "~/.%src konnte nicht gelesen werden"

#: src/pmap.c:1155 src/pmap.c:1180
msgid "library failed pids statistics"
msgstr ""

#: src/ps/display.c:57
#, c-format
msgid "Signal %d (%s) caught by %s (%s).\n"
msgstr "Signal %d (%s) empfangen von %s (%s).\n"

#: src/ps/display.c:71 src/ps/display.c:248 src/ps/display.c:403
#: src/ps/output.c:2322 src/ps/parser.c:495 src/ps/parser.c:742
#: src/ps/select.c:92 src/ps/sortformat.c:259 src/ps/sortformat.c:297
#: src/ps/sortformat.c:545
msgid "please report this bug"
msgstr "Bitte melden Sie diesen Fehler"

#: src/ps/display.c:311 src/ps/display.c:480
#, c-format
msgid "fatal library error, reap\n"
msgstr ""

#: src/ps/display.c:361
#, c-format
msgid "could not find ppid\n"
msgstr "ppid kann nicht gefunden werden\n"

#: src/ps/display.c:371
#, c-format
msgid "could not find start_time\n"
msgstr "start_time kann nicht gefunden werden\n"

#: src/ps/global.c:281
#, c-format
msgid "your %dx%d screen size is bogus. expect trouble\n"
msgstr "Ihre Bildschirmgröße %dx%d ist Unsinn, Probleme sind zu erwarten\n"

#: src/ps/global.c:354 src/ps/global.c:366
msgid "environment specified an unknown personality"
msgstr "Eine unbekannte Prozess-Ausführungsumgebung wurde angegeben"

#: src/ps/global.c:358
#, c-format
msgid "cannot strdup() personality text\n"
msgstr ""
"Text der Prozess-Ausführungsumgebung kann nicht mit strdup() verarbeitet "
"werden\n"

#: src/ps/global.c:489
#, c-format
msgid "fatal library error, context\n"
msgstr ""

#: src/ps/global.c:497
#, c-format
msgid "fatal library error, lookup self\n"
msgstr ""

#. Translation Note:
#. . The following translatable word will be used to recognize the
#. . user's request for help text.  In other words, the translation
#. . you provide will alter program behavior.
#. .
#. . It must be limited to 15 characters or less.
#.
#: src/ps/global.c:536
msgid "help"
msgstr "Hilfe"

#. Translation Notes for ps Help #1 ---------------------------------
#. .  This next group of lines represents 6 pairs of words + abbreviations
#. .  which are the basis of the 'ps' program help text.
#. .
#. .  The words and abbreviations you provide will alter program behavior.
#. .  They will also appear in the help usage summary associated with the
#. .  "Notes for ps Help #2" below.
#. .
#. .  In their English form, help text would look like this:
#. .      Try 'ps --help <simple|list|output|threads|misc|all>'
#. .       or 'ps --help <s|l|o|t|m|a>'
#. .      for additional help text.
#. .
#. .  When translating these 6 pairs you may choose any appropriate
#. .  language equivalents and the only requirement is the abbreviated
#. .  representations must be unique.
#. .
#. .  By default, those abbreviations are single characters.  However,
#. .  they are not limited to only one character after translation.
#. .
#. Translation Hint, Pair #1
#: src/ps/help.c:63
msgid "simple"
msgstr "Einfach"

#: src/ps/help.c:63
msgid "s"
msgstr "s"

#. Translation Hint, Pair #2
#: src/ps/help.c:65
msgid "list"
msgstr "Liste"

#: src/ps/help.c:65
msgid "l"
msgstr "l"

#. Translation Hint, Pair #3
#: src/ps/help.c:67
msgid "output"
msgstr "Ausgabe"

#: src/ps/help.c:67
msgid "o"
msgstr "o"

#. Translation Hint, Pair #4
#: src/ps/help.c:69
msgid "threads"
msgstr "Threads"

#: src/ps/help.c:69
msgid "t"
msgstr "t"

#. Translation Hint, Pair #5
#: src/ps/help.c:71
msgid "misc"
msgstr "Verschiedenes"

#: src/ps/help.c:71
msgid "m"
msgstr "m"

#. Translation Hint, Pair #6
#: src/ps/help.c:73
msgid "all"
msgstr "Alle"

#: src/ps/help.c:73
msgid "a"
msgstr "a"

#: src/ps/help.c:94
#, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
msgstr ""
"\n"
"Aufruf: \n"
" %s [Optionen]\n"

#: src/ps/help.c:99
msgid ""
"\n"
"Basic options:\n"
msgstr ""
"\n"
"Grundlegende Optionen:\n"

#: src/ps/help.c:100
msgid " -A, -e               all processes\n"
msgstr " -A, -e               alle Prozesse\n"

#: src/ps/help.c:101
msgid " -a                   all with tty, except session leaders\n"
msgstr " -a                   alle mit TTY, außer Session Leaders\n"

#: src/ps/help.c:102
msgid "  a                   all with tty, including other users\n"
msgstr "  a                   alle mit TTY, einschließlich andere Benutzer\n"

#: src/ps/help.c:103
msgid " -d                   all except session leaders\n"
msgstr ""
" -d                   alle außer Session Leaders\n"
"                       (übergeordnete Prozessgruppen)\n"

#: src/ps/help.c:104
msgid " -N, --deselect       negate selection\n"
msgstr " -N, --deselect       Auswahl umkehren\n"

#: src/ps/help.c:105
msgid "  r                   only running processes\n"
msgstr "  r                   nur laufende Prozesse\n"

#: src/ps/help.c:106
msgid "  T                   all processes on this terminal\n"
msgstr "  T                   alle Prozesse in diesem Terminal\n"

#: src/ps/help.c:107
msgid "  x                   processes without controlling ttys\n"
msgstr "  x                   Prozesse ohne steuernde ttys\n"

#: src/ps/help.c:110
msgid ""
"\n"
"Selection by list:\n"
msgstr ""
"\n"
"Auswahl nach Liste:\n"

#: src/ps/help.c:111
msgid " -C <command>         command name\n"
msgstr " -C <Befehl>          Befehlsname\n"

#: src/ps/help.c:112
msgid " -G, --Group <GID>    real group id or name\n"
msgstr " -G, --Group <GID>    reale Gruppenkennung oder Name\n"

#: src/ps/help.c:113
msgid " -g, --group <group>  session or effective group name\n"
msgstr " -g, --group <group>  Sitzung oder effektiver Gruppenname\n"

#: src/ps/help.c:114
msgid " -p, p, --pid <PID>   process id\n"
msgstr " -p, p, --pid <PID>   Prozesskennung (ID)\n"

#: src/ps/help.c:115
msgid "        --ppid <PID>  parent process id\n"
msgstr "        --ppid <PID>  nach ID des Elternprozesses auswählen\n"

#: src/ps/help.c:116
msgid ""
" -q, q, --quick-pid <PID>\n"
"                      process id (quick mode)\n"
msgstr ""
" -q, q, --quick-pid <PID>\n"
"                      Prozesskennung (schneller Modus)\n"

#: src/ps/help.c:118
msgid " -s, --sid <session>  session id\n"
msgstr " -s, --sid <Sitzung>  Sitzungs-ID\n"

#: src/ps/help.c:119
msgid " -t, t, --tty <tty>   terminal\n"
msgstr " -t, t, --tty <tty>   Terminal\n"

#: src/ps/help.c:120
msgid " -u, U, --user <UID>  effective user id or name\n"
msgstr " -u, U, --user <UID>  effektive Benutzer-ID oder Name\n"

#: src/ps/help.c:121
msgid " -U, --User <UID>     real user id or name\n"
msgstr " -U, --User <UID>     reale Benutzer-ID oder Name\n"

#: src/ps/help.c:122
msgid ""
"\n"
"  The selection options take as their argument either:\n"
"    a comma-separated list e.g. '-u root,nobody' or\n"
"    a blank-separated list e.g. '-p 123 4567'\n"
msgstr ""
"\n"
"  Die Auswahloptionen akzeptieren diese Argumentformate:\n"
"    durch Kommata getrennte Liste, z.B. »-u root,nobody« oder\n"
"    durch Leerzeichen getrennte Liste, z.B. »-p 123 4567«\n"

#: src/ps/help.c:128
msgid ""
"\n"
"Output formats:\n"
msgstr ""
"\n"
"Ausgabeformate:\n"

#: src/ps/help.c:129
msgid " -F                   extra full\n"
msgstr " -F                   extra vollständig\n"

#: src/ps/help.c:130
msgid " -f                   full-format, including command lines\n"
msgstr " -f                   Vollformat einschließlich Befehlszeilen\n"

#: src/ps/help.c:131
msgid "  f, --forest         ascii art process tree\n"
msgstr "  f, --forest         Prozessbaum in ASCII Art\n"

#: src/ps/help.c:132
msgid " -H                   show process hierarchy\n"
msgstr " -H                   Prozesshierarchie anzeigen\n"

#: src/ps/help.c:133
msgid " -j                   jobs format\n"
msgstr " -j                   Jobs-Format\n"

#: src/ps/help.c:134
msgid "  j                   BSD job control format\n"
msgstr "  j                   BSD-Jobsteuerung-Format\n"

#: src/ps/help.c:135
msgid " -l                   long format\n"
msgstr " -l                   Langformat\n"

#: src/ps/help.c:136
msgid "  l                   BSD long format\n"
msgstr "  l                   BSD-Langformat\n"

#: src/ps/help.c:137
msgid " -M, Z                add security data (for SELinux)\n"
msgstr " -M, Z                Sicherheitsdaten hinzufügen (für SELinux)\n"

#: src/ps/help.c:138
msgid " -O <format>          preloaded with default columns\n"
msgstr " -O <format>          mit vorgegebenen Spalten\n"

#: src/ps/help.c:139
msgid "  O <format>          as -O, with BSD personality\n"
msgstr "  O <format>          wie -O, mit BSD-Prozess-Ausführungsumgebung\n"

#: src/ps/help.c:140
msgid ""
" -o, o, --format <format>\n"
"                      user-defined format\n"
msgstr ""
" -o, o, --format <Format>\n"
"                      benutzerdefiniertes Format\n"

#: src/ps/help.c:142
#, fuzzy
msgid "  -P                  add psr column\n"
msgstr "  -o                   nichts tun\n"

#: src/ps/help.c:143
msgid "  s                   signal format\n"
msgstr "  s                   Signalformat\n"

#: src/ps/help.c:144
msgid "  u                   user-oriented format\n"
msgstr "  u                   benutzerorientiertes Format\n"

#: src/ps/help.c:145
msgid "  v                   virtual memory format\n"
msgstr "  v                   virtuelles Speicherformat\n"

#: src/ps/help.c:146
msgid "  X                   register format\n"
msgstr "  X                   Registerformat\n"

#: src/ps/help.c:147
msgid ""
" -y                   do not show flags, show rss vs. addr (used with -l)\n"
msgstr ""
" -y                   keine Flags anzeigen, rrs vs. addr anzeigen (genutzt "
"mit -l)\n"

#: src/ps/help.c:148
msgid "     --context        display security context (for SELinux)\n"
msgstr "     --context        Sicherheitskontext anzeigen (für SELinux)\n"

#: src/ps/help.c:149
msgid "     --headers        repeat header lines, one per page\n"
msgstr "     --headers        Kopfzeilen wiederholen, eine pro Seite\n"

#: src/ps/help.c:150
msgid "     --no-headers     do not print header at all\n"
msgstr "      --no-headers    keine Kopfzeilen ausgeben\n"

#: src/ps/help.c:151
msgid ""
"     --cols, --columns, --width <num>\n"
"                      set screen width\n"
msgstr ""
"     --cols, --columns, --width <Zahl>\n"
"                      Bildschirmbreite angeben\n"

#: src/ps/help.c:153
msgid ""
"     --rows, --lines <num>\n"
"                      set screen height\n"
msgstr ""
"     --rows, --lines <Zahl>\n"
"                      Bildschirmhöhe angeben\n"

#: src/ps/help.c:157
msgid ""
"\n"
"Show threads:\n"
msgstr ""
"\n"
"Threads anzeigen:\n"

#: src/ps/help.c:158
msgid "  H                   as if they were processes\n"
msgstr "  H                   als ob sie Prozesse wären\n"

#: src/ps/help.c:159
msgid " -L                   possibly with LWP and NLWP columns\n"
msgstr " -L                   möglich mit LWP- und NLWP-Spalten\n"

#: src/ps/help.c:160
msgid " -m, m                after processes\n"
msgstr " -m, m                nach Prozessen\n"

#: src/ps/help.c:161
msgid " -T                   possibly with SPID column\n"
msgstr " -T                   möglich mit SPID-Spalten\n"

#: src/ps/help.c:164
msgid ""
"\n"
"Miscellaneous options:\n"
msgstr ""
"\n"
"Verschiedene Optionen:\n"

#: src/ps/help.c:165
msgid " -c                   show scheduling class with -l option\n"
msgstr " -c                   Scheduling-Klasse mit Option -l anzeigen\n"

#: src/ps/help.c:166
msgid "  c                   show true command name\n"
msgstr "  c                   den echten Befehlsnaman anzeigen\n"

#: src/ps/help.c:167
msgid "  e                   show the environment after command\n"
msgstr "  e                   Umgebung nach dem Befehl anzeigen\n"

#: src/ps/help.c:168
msgid ""
"  k,    --sort        specify sort order as: [+|-]key[,[+|-]key[,...]]\n"
msgstr ""
"  k,    --sort        Reihenfolge angeben wie: [+|-]Schlüssel[,"
"[+|-]Schlüssel[, …]]\n"

#: src/ps/help.c:169
msgid "  L                   show format specifiers\n"
msgstr "  L                   Formatbezeichner anzeigen\n"

#: src/ps/help.c:170
msgid "  n                   display numeric uid and wchan\n"
msgstr "  n                   UID und WCHAN numerisch anzeigen\n"

#: src/ps/help.c:171
msgid "  S,    --cumulative  include some dead child process data\n"
msgstr "  S,    --cumulative  Daten toter Kindprozesse einbeziehen\n"

#: src/ps/help.c:172
msgid " -y                   do not show flags, show rss (only with -l)\n"
msgstr ""
" -y                   keine Flags anzeigen, rss anzeigen (nur mit -l)\n"

#: src/ps/help.c:173
msgid " -V, V, --version     display version information and exit\n"
msgstr " -V, V, --version     Versionsinformation anzeigen und beenden\n"

#: src/ps/help.c:174
msgid " -w, w                unlimited output width\n"
msgstr " -w, w                Breite der Ausgabe unbegrenzt\n"

#: src/ps/help.c:175
#, c-format
msgid ""
"\n"
"        --%s <%s|%s|%s|%s|%s|%s>\n"
"                      display help and exit\n"
msgstr ""
"\n"
"        --%s <%s|%s|%s|%s|%s|%s>\n"
"                      Hilfe anzeigen und beenden\n"

#. Translation Notes for ps Help #2 ---------------------------------
#. .  Most of the following c-format string is derived from the 6
#. .  pairs of words + chars mentioned above in "Notes for ps Help #1".
#. .
#. .  In its full English form, help text would look like this:
#. .      Try 'ps --help <simple|list|output|threads|misc|all>'
#. .       or 'ps --help <s|l|o|t|m|a>'
#. .      for additional help text.
#. .
#. .  The word for "help" will be translated elsewhere.  Thus, the only
#. .  translations below will be: "Try", "or" and "for additional...".
#. .
#: src/ps/help.c:196
#, c-format
msgid ""
"\n"
" Try '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
"  or '%s --%s <%s|%s|%s|%s|%s|%s>'\n"
" for additional help text.\n"
msgstr ""
"\n"
" Versuchen Sie »%s --%s <%s|%s|%s|%s|%s|%s>«\n"
"  oder »%s --%s <%s|%s|%s|%s|%s|%s>«,\n"
" um zusätzliche Hilfe anzuzeigen.\n"

#: src/ps/help.c:209
#, c-format
msgid ""
"\n"
"For more details see ps(1).\n"
msgstr ""
"\n"
"Für weitere Informationen siehe ps(1).\n"

#: src/ps/output.c:99
msgid "Unable to get system boot time"
msgstr ""

#: src/ps/output.c:114
#, fuzzy
msgid "Unable to get total memory"
msgstr "%13lu %s Gesamtspeicher\n"

#: src/ps/output.c:2169
#, c-format
msgid "fix bigness error\n"
msgstr ""

#: src/ps/output.c:2252
#, c-format
msgid "bad alignment code\n"
msgstr "fehlerhafter Ausrichtungscode\n"

#: src/ps/parser.c:57
msgid "the option is exclusive: "
msgstr "die Option ist exklusiv: "

#: src/ps/parser.c:87
msgid "process ID list syntax error"
msgstr "Syntaxfehler in Prozess-ID-Liste"

#: src/ps/parser.c:88 src/ps/parser.c:89
msgid "process ID out of range"
msgstr "Prozess-ID ist außerhalb des gültigen Bereichs"

#: src/ps/parser.c:102
msgid "user name does not exist"
msgstr "Benutzername existiert nicht"

#: src/ps/parser.c:108
msgid "user ID out of range"
msgstr "Benutzer-ID ist außerhalb des gültigen Bereichs"

#: src/ps/parser.c:121
msgid "group name does not exist"
msgstr "Gruppenname existiert nicht"

#: src/ps/parser.c:127
msgid "group ID out of range"
msgstr "Gruppen-ID ist außerhalb des gültigen Bereichs"

#: src/ps/parser.c:143 src/ps/parser.c:167
msgid "TTY could not be found"
msgstr "TTY wurde nicht gefunden"

#: src/ps/parser.c:169
msgid "list member was not a TTY"
msgstr "Listenelement war kein TTY"

#: src/ps/parser.c:194
msgid "improper list"
msgstr "ungültige Liste"

#: src/ps/parser.c:242
msgid "list of command names must follow -C"
msgstr "Liste von Befehlsnamen muss auf -C folgen"

#: src/ps/parser.c:256
msgid "list of real groups must follow -G"
msgstr "Liste von realen Gruppen muss auf -G folgen"

#: src/ps/parser.c:269
msgid "list of jobs must follow -J"
msgstr "Jobliste muss auf -J folgen"

#: src/ps/parser.c:297
msgid "format or sort specification must follow -O"
msgstr "Format- oder Sortierspezifikation muss auf -O folgen"

#: src/ps/parser.c:308
msgid "list of PRM groups must follow -R"
msgstr "Liste von PRM-Gruppen muss auf -R folgen"

#: src/ps/parser.c:327
msgid "list of real users must follow -U"
msgstr "Liste von realen Benutzern muss auf -U folgen"

#: src/ps/parser.c:368
msgid "list of session leaders OR effective group names must follow -g"
msgstr "Auf Liste der Session Leaders ODER effektiven Gruppe muss -g folgen"

#: src/ps/parser.c:379
msgid "list of session leaders OR effective group IDs was invalid"
msgstr "Liste der Session Leaders ODER effektiven Gruppen-IDs war ungültig"

#: src/ps/parser.c:403
msgid "format specification must follow -o"
msgstr "Formatspezifikation muss auf -o folgen"

#: src/ps/parser.c:409
msgid "list of process IDs must follow -p"
msgstr "Liste von Prozess-IDs muss auf -p folgen"

#: src/ps/parser.c:426
msgid "the -r option is reserved"
msgstr "die Option -r ist reserviert"

#: src/ps/parser.c:432
msgid "list of session IDs must follow -s"
msgstr "Liste von Sitzungs-IDs muss auf -s folgen"

#: src/ps/parser.c:440
msgid "list of terminals (pty, tty...) must follow -t"
msgstr "Auf Liste von Terminals (pty, tty …) muss -t folgen"

#: src/ps/parser.c:448
msgid "list of users must follow -u"
msgstr "Benutzerliste muss auf -u folgen"

#: src/ps/parser.c:470
msgid "must set personality to get -x option"
msgstr ""

#: src/ps/parser.c:485
msgid "list of zones (contexts, labels, whatever?) must follow -z"
msgstr ""

#: src/ps/parser.c:492
msgid "embedded '-' among SysV options makes no sense"
msgstr "in SysV-Optionen eingebettetes »-« ergibt keinen Sinn"

#: src/ps/parser.c:498
msgid "unsupported SysV option"
msgstr "nicht unterstützte SysV-Option"

#: src/ps/parser.c:511
msgid "cannot happen - problem #1"
msgstr "darf nicht passieren - Problem #1"

#: src/ps/parser.c:515
msgid "cannot happen - problem #2"
msgstr "darf nicht passieren - Problem #2"

#: src/ps/parser.c:517
msgid "second chance parse failed, not BSD or SysV"
msgstr "erneutes Einlesen ist fehlgeschlagen, weder BSD noch SysV"

#: src/ps/parser.c:534
msgid "option A is reserved"
msgstr "Option A ist reserviert"

#: src/ps/parser.c:539
msgid "option C is reserved"
msgstr "Option C ist reserviert"

#: src/ps/parser.c:559
msgid "format or sort specification must follow O"
msgstr "Format- oder Sortierspezifikation muss auf O folgen"

#: src/ps/parser.c:584
msgid "list of users must follow U"
msgstr "Benutzerliste muss auf U folgen"

#: src/ps/parser.c:596
msgid "obsolete W option not supported (you have a /dev/drum?)"
msgstr ""
"die veraltete Option W wird nicht unterstützt (haben Sie ein /dev/drum?)"

#: src/ps/parser.c:632 src/ps/parser.c:899 src/ps/parser.c:908
msgid "only one heading option may be specified"
msgstr "Nur eine Heading-Option darf angegeben werden"

#: src/ps/parser.c:647
msgid "long sort specification must follow 'k'"
msgstr "lange Sortierspezifikation muss auf »k« folgen"

#: src/ps/parser.c:675
msgid "format specification must follow o"
msgstr "Formatspezifikation muss auf o folgen"

#: src/ps/parser.c:681
msgid "list of process IDs must follow p"
msgstr "Liste von Prozess-IDs muss auf p folgen"

#: src/ps/parser.c:739
msgid "embedded '-' among BSD options makes no sense"
msgstr "in BSD-Optionen eingebettetes »-« ergibt keinen Sinn"

#: src/ps/parser.c:745
msgid "unsupported option (BSD syntax)"
msgstr "nicht unterstützte Option (BSD-Syntax)"

#: src/ps/parser.c:831 src/ps/parser.c:843
msgid "unknown gnu long option"
msgstr "unbekannte lange GNU-Option"

#: src/ps/parser.c:851
msgid "list of real groups must follow --Group"
msgstr "Liste von realen Gruppen muss auf --Group folgen"

#: src/ps/parser.c:859
msgid "list of real users must follow --User"
msgstr "Liste von realen Benutzern muss auf --User folgen"

#: src/ps/parser.c:878
msgid "number of columns must follow --cols, --width, or --columns"
msgstr "Anzahl der Spalten muss auf --cols, --width oder --columns folgen"

#: src/ps/parser.c:881
msgid "option --cumulative does not take an argument"
msgstr "Option --cumulative akzeptiert kein Argument"

#: src/ps/parser.c:886
msgid "option --deselect does not take an argument"
msgstr "Option --deselect akzeptiert kein Argument"

#: src/ps/parser.c:898
msgid "option --no-heading does not take an argument"
msgstr "Option --no-heading akzeptiert kein Argument"

#: src/ps/parser.c:907
msgid "option --heading does not take an argument"
msgstr "Option --heading akzeptiert kein Argument"

#: src/ps/parser.c:913
msgid "option --forest does not take an argument"
msgstr "Option --forest akzeptiert kein Argument"

#: src/ps/parser.c:919
msgid "format specification must follow --format"
msgstr "Formatspezifikation muss auf --format folgen"

#: src/ps/parser.c:925
msgid "list of effective groups must follow --group"
msgstr "Liste von effektiven Gruppen muss auf --group folgen"

#: src/ps/parser.c:943
msgid "list of process IDs must follow --pid"
msgstr "Liste von Prozess-IDs muss auf --pid folgen"

#: src/ps/parser.c:959
msgid "list of process IDs must follow --ppid"
msgstr "Liste von Prozess-IDs muss auf --ppid folgen"

#: src/ps/parser.c:977
msgid "number of rows must follow --rows or --lines"
msgstr "Anzahl der Zeilen muss auf --rows oder --lines folgen"

#: src/ps/parser.c:981
msgid "some sid thing(s) must follow --sid"
msgstr ""

#: src/ps/parser.c:989
msgid "long sort specification must follow --sort"
msgstr "lange Sortierspezifikation muss auf --sort folgen"

#: src/ps/parser.c:995
msgid "list of ttys must follow --tty"
msgstr "Liste von Terminals muss auf -tty folgen"

#: src/ps/parser.c:1003
msgid "list of effective users must follow --user"
msgstr "Liste von realen Benutzern muss auf --user folgen"

#: src/ps/parser.c:1119
msgid "way bad"
msgstr ""

#: src/ps/parser.c:1133
msgid "garbage option"
msgstr ""

#: src/ps/parser.c:1137
msgid "something broke"
msgstr ""

#: src/ps/parser.c:1157
msgid "thread display conflicts with forest display"
msgstr "Konflikt zwischen Thread- und Baumansicht"

#: src/ps/parser.c:1162
msgid "thread flags conflict; can't use H with m or -m"
msgstr ""
"Konflikt der Thread-Schalter; H kann nicht mit m oder -m verwendet werden"

#: src/ps/parser.c:1164
msgid "thread flags conflict; can't use both m and -m"
msgstr ""
"Konflikt der Thread-Schalter; m und -m können nicht zusammen verwendet werden"

#: src/ps/parser.c:1166
msgid "thread flags conflict; can't use both -L and -T"
msgstr ""
"Konflikt der Thread-Schalter; -L und -T können nicht zusammen verwendet "
"werden"

#: src/ps/parser.c:1239 src/ps/parser.c:1240
#, c-format
msgid "error: %s\n"
msgstr "Fehler: %s\n"

#: src/ps/select.c:68
msgid "process selection options conflict"
msgstr "Optionen zur Prozessauswahl stehen im Konflikt"

#: src/ps/sortformat.c:106 src/ps/sortformat.c:111
msgid "seriously crashing: goodbye cruel world"
msgstr "Ernsthafter Absturz: Goodbye cruel world"

#: src/ps/sortformat.c:146 src/ps/sortformat.c:165
#, fuzzy
msgid "missing AIX field descriptor"
msgstr "unbekannter AIX-Felddeskriptor"

#: src/ps/sortformat.c:148
msgid "improper AIX field descriptor"
msgstr "ungültiger AIX-Felddeskriptor"

#: src/ps/sortformat.c:170
msgid "unknown AIX field descriptor"
msgstr "unbekannter AIX-Felddeskriptor"

#: src/ps/sortformat.c:175
msgid "AIX field descriptor processing bug"
msgstr ""

#: src/ps/sortformat.c:283
#, c-format
msgid "unknown user-defined format specifier \"%s\""
msgstr "unbekannter benutzerdefinierter Formatbezeichner »%s«"

#: src/ps/sortformat.c:310
msgid "empty format list"
msgstr "leere Formatliste"

#: src/ps/sortformat.c:311
msgid "improper format list"
msgstr "unzulässige Formatliste"

#: src/ps/sortformat.c:312
msgid "column widths must be unsigned decimal numbers"
msgstr ""
"Spaltenbreiten müssen in Dezimalzahlen ohne Vorzeichen angegeben werden"

#: src/ps/sortformat.c:313
msgid "can not set width for a macro (multi-column) format specifier"
msgstr ""
"Breite kann für einen Makro- (mehrspaltigen) Formatbezeichner nicht gesetzt "
"werden"

#: src/ps/sortformat.c:367 src/ps/sortformat.c:383
msgid "improper sort list"
msgstr "ungültige Sortierliste"

#: src/ps/sortformat.c:378
msgid "empty sort list"
msgstr "leere Sortierliste"

#: src/ps/sortformat.c:399 src/ps/sortformat.c:478 src/ps/sortformat.c:480
msgid "unknown sort specifier"
msgstr "unbekannter Sortierungsbezeichner"

#: src/ps/sortformat.c:426 src/ps/sortformat.c:431 src/ps/sortformat.c:438
#: src/ps/sortformat.c:444
msgid "bad sorting code"
msgstr "fehlerhafter Sortiercode"

#: src/ps/sortformat.c:441
msgid "PPID sort and forest output conflict"
msgstr "Konflikt zwischen PID-Sortierung und Baumansicht"

#: src/ps/sortformat.c:515
msgid "option -O can not follow other format options"
msgstr "Option -O kann nicht auf andere Formatoptionen folgen"

#: src/ps/sortformat.c:522 src/ps/sortformat.c:540
msgid "multiple sort options"
msgstr "mehrfache Sortieroptionen"

#: src/ps/sortformat.c:530
msgid "option O is neither first format nor sort order"
msgstr "Option O ist weder erstes Format noch Sortierreihenfolge"

#: src/ps/sortformat.c:657
msgid "modifier -y without format -l makes no sense"
msgstr "Modifikator -y ohne Format -l ergibt keinen Sinn"

#: src/ps/sortformat.c:756
msgid "bug: must reset the list first"
msgstr "Fehler: die Liste muss zuerst zurückgesetzt werden"

#: src/ps/sortformat.c:793
msgid "tell <procps@freelists.org> what you expected"
msgstr "Teilen Sie auf <procps@freelists.org> mit, was Sie erwartet haben."

#: src/ps/sortformat.c:803
msgid ""
"tell <procps@freelists.org> what you want (-L/-T, -m/m/H, and $PS_FORMAT)"
msgstr ""
"Teilen Sie auf <procps@freelists.org> mit, was Sie wollen (-L/-T, -m/m/H und "
"$PS_FORMAT)."

#: src/ps/sortformat.c:820
#, c-format
msgid "warning: $PS_FORMAT ignored. (%s)\n"
msgstr "Warnung: $PS_FORMAT wird ignoriert. (%s)\n"

#: src/ps/sortformat.c:825 src/ps/sortformat.c:835
msgid "conflicting format options"
msgstr "widersprüchliche Formatoptionen"

#: src/ps/sortformat.c:826
msgid "can not use output modifiers with user-defined output"
msgstr ""
"Ausgabemodifikatoren können bei benutzerdefinierter Ausgabe nicht verwendet "
"werden"

#: src/ps/sortformat.c:827
msgid "-L/-T with H/m/-m and -o/-O/o/O is nonsense"
msgstr "-L/-T mit H/m/-m und -o/-O/o/O ist Unsinn"

#: src/ps/sortformat.c:885
msgid "internal error: no PID or PPID for -j option"
msgstr "interner Fehler: keine PID oder PPID für Option -j"

#: src/ps/sortformat.c:887
msgid "lost my PGID"
msgstr "Prozessgruppen-ID verloren"

#: src/ps/sortformat.c:900
msgid "internal error: no PRI for -c option"
msgstr "interner Fehler: keine PRI für Option -c"

#: src/ps/sortformat.c:903
msgid "lost my CLS"
msgstr "CLS verloren"

#: src/ps/sortformat.c:908
msgid "-T with H/-m/m but no PID for SPID to follow"
msgstr "-T mit H/-m/m, aber keine PID für SPID zum Folgen"

#: src/ps/sortformat.c:919
msgid "-L with H/-m/m but no PID/PGID/SID/SESS for NLWP to follow"
msgstr "-L mit H/-m/m, aber keine PID/PGID/SID/SESS für NLWP zum Folgen"

#: src/pwdx.c:37
#, c-format
msgid " %s [options] pid...\n"
msgstr " %s [Optionen] pid …\n"

#: src/pwdx.c:113
#, c-format
msgid "invalid process id: %s"
msgstr "ungültige Prozess‐ID: %s"

#: src/skill.c:281
msgid "Unable to create pid Pids_info structure"
msgstr ""

#: src/skill.c:284 src/w.c:408
#, fuzzy
msgid "Unable to load process information"
msgstr "Prozess kann nicht geforkt werden"

#: src/skill.c:313
#, c-format
msgid " %s [signal] [options] <expression>\n"
msgstr " %s [Signal] [Optionen] <Ausdruck>\n"

#: src/skill.c:317
#, c-format
msgid " %s [new priority] [options] <expression>\n"
msgstr " %s [neue Priorität] [Optionen] <Ausdruck>\n"

#: src/skill.c:321
msgid " -f, --fast         fast mode (not implemented)\n"
msgstr " -f, --fast         schneller Modus (nicht implementiert)\n"

#: src/skill.c:322
msgid " -i, --interactive  interactive\n"
msgstr " -i, --interactive  interaktiv\n"

#: src/skill.c:323
msgid " -l, --list         list all signal names\n"
msgstr " -l, --list         alle Signalnamen auflisten\n"

#: src/skill.c:324
msgid " -L, --table        list all signal names in a nice table\n"
msgstr ""
" -L, --table        alle Signalnamen in einer Tabelle\n"
"                    auflisten\n"

#: src/skill.c:325
msgid ""
" -n, --no-action    do not actually kill processes; just print what would "
"happen\n"
msgstr ""
" -n, --no-action    keine Prozesse wirklich abwürgen, nur testen,\n"
"                    was passieren würde\n"

#: src/skill.c:326
msgid " -v, --verbose      explain what is being done\n"
msgstr " -v, --verbose      erklären, was geschieht\n"

#: src/skill.c:327
msgid " -w, --warnings     enable warnings (not implemented)\n"
msgstr " -w, --warnings     Warnungen aktivieren (nicht implementiert)\n"

#: src/skill.c:329
msgid ""
"Expression can be: terminal, user, pid, command.\n"
"The options below may be used to ensure correct interpretation.\n"
msgstr ""
"Ausdrücke können sein: terminal, user, pid, command.\n"
"Die nachfolgenden Optionen können verwendet werden, um\n"
"eine korrekte Interpretation zu gewährleisten.\n"

#: src/skill.c:331
msgid " -c, --command <command>  expression is a command name\n"
msgstr " -c, --command <Befehl>   Ausdruck ist ein Befehlsname\n"

#: src/skill.c:332
msgid " -p, --pid <pid>          expression is a process id number\n"
msgstr " -p, --pid <pid>          Ausdruck ist eine Prozesskennung (ID)\n"

#: src/skill.c:333
msgid " -t, --tty <tty>          expression is a terminal\n"
msgstr " -t, --tty <tty>          Ausdruck ist ein Terminal\n"

#: src/skill.c:334
msgid " -u, --user <username>    expression is a username\n"
msgstr " -u, --user <username>    Ausdruck ist ein Benutzername\n"

#: src/skill.c:336
msgid "Alternatively, expression can be:\n"
msgstr "Alternativ kann der Ausdruck Folgendes sein:\n"

#: src/skill.c:337
msgid ""
" --ns <pid>               match the processes that belong to the same\n"
"                          namespace as <pid>\n"
msgstr ""
" --ns <PID>               sucht Prozesse, die zum gleichen Namensraum wie\n"
"                           <PID> gehören\n"

#: src/skill.c:339
msgid ""
" --nslist <ns,...>        list which namespaces will be considered for\n"
"                          the --ns option; available namespaces are\n"
":                          ipc, mnt, net, pid, user, uts\n"
msgstr ""
" --nslist <ns, …>         listet die Namensräume auf, die für die Option\n"
"                           --ns verwendet werden; verfügbare Namensräume "
"sind\n"
"                           ipc, mnt, net, pid, user, uts\n"

#: src/skill.c:349
#, c-format
msgid ""
"\n"
"The default signal is TERM. Use -l or -L to list available signals.\n"
"Particularly useful signals include HUP, INT, KILL, STOP, CONT, and 0.\n"
"Alternate signals may be specified in three ways: -SIGKILL -KILL -9\n"
msgstr ""
"\n"
"Das Vorgabesignal ist TERM. Mit -l oder -L können verfügbare Signale\n"
"aufgelistet werden. In bestimmten Fällen sind HUP, INT, KILL, STOP,\n"
"CONT und 0 verwendbar. Alternative Signale können auf drei Arten\n"
"angegeben werden: -SIGKILL -KILL -9\n"

#: src/skill.c:356
#, c-format
msgid ""
"\n"
"The default priority is +4. (snice +4 ...)\n"
"Priority numbers range from +20 (slowest) to -20 (fastest).\n"
"Negative priority numbers are restricted to administrative users.\n"
msgstr ""
"\n"
"Die Vorgabepriorität ist +4. (snice +4 …). Prioritätskennziffern\n"
"liegen im Bereich von +20 (am langsamsten) und -20 (am schnellsten).\n"
"Negative Prioritätskennziffern sind Benutzern mit Administratorrechten\n"
"vorbehalten.\n"

#: src/skill.c:378
#, c-format
msgid "priority %lu out of range"
msgstr "Priorität %lu ist außerhalb des Wertebereiches"

#: src/skill.c:487
#, c-format
msgid "invalid pid number %s"
msgstr "ungültige PID-Nummer %s"

#: src/skill.c:491
msgid "error reading reference namespace information"
msgstr "Fehler beim Lesen der Informationen für Referenz-Namensraum"

#: src/skill.c:499
msgid "invalid namespace list"
msgstr "Ungültige Namensraumliste"

#: src/skill.c:536
msgid "no process selection criteria"
msgstr "Keine Kriterien zur Prozessauswahl"

#: src/skill.c:539
msgid "general flags may not be repeated"
msgstr "Allgemeine Schalter dürfen nicht wiederholt angegeben werden"

#: src/skill.c:542
msgid "-i makes no sense with -v, -f, and -n"
msgstr "-i ergibt keinen Sinn mit -v, -f und -n"

#: src/skill.c:544
msgid "-v makes no sense with -i and -f"
msgstr "-v ergibt keinen Sinn mit -i und -f"

#: src/skill.c:588
#, c-format
msgid "skill: \"%s\" is not supported\n"
msgstr "skill: »%s« wird nicht unterstützt\n"

#: src/slabtop.c:106
msgid " -d, --delay <secs>  delay updates\n"
msgstr " -d, --delay <sec>   Aktualisierungsverzögerung\n"

#: src/slabtop.c:107
msgid " -o, --once          only display once, then exit\n"
msgstr " -o, --once          nur einmal anzeigen, dann beenden\n"

#: src/slabtop.c:108
msgid " -s, --sort <char>   specify sort criteria by character (see below)\n"
msgstr ""
" -s, --sort <char>   Sortierkriterien in Buchstaben angeben (siehe unten)\n"

#: src/slabtop.c:113
msgid ""
"\n"
"The following are valid sort criteria:\n"
msgstr ""
"\n"
"Folgende Sortierkriterien sind gültig:\n"

#: src/slabtop.c:114
msgid " a: sort by number of active objects\n"
msgstr " a: nach Anzahl der aktiven Objekte sortieren\n"

#: src/slabtop.c:115
msgid " b: sort by objects per slab\n"
msgstr " b: nach Objekten pro Slab sortieren\n"

#: src/slabtop.c:116
msgid " c: sort by cache size\n"
msgstr " c: nach Cache-Größe sortieren\n"

#: src/slabtop.c:117
msgid " l: sort by number of slabs\n"
msgstr " l: nach der Anzahl der Slabs sortieren\n"

#: src/slabtop.c:118
#, fuzzy
msgid " v: sort by (non display) number of active slabs\n"
msgstr " v: nach Anzahl der aktiven Slabs sortieren\n"

#: src/slabtop.c:119
msgid " n: sort by name\n"
msgstr " n: nach Name sortieren\n"

#: src/slabtop.c:120
msgid " o: sort by number of objects (the default)\n"
msgstr " o: nach Anzahl der Objekte sortieren (Vorgabe)\n"

#: src/slabtop.c:121
#, fuzzy
msgid " p: sort by (non display) pages per slab\n"
msgstr " p: nach Pages pro Slab sortieren\n"

#: src/slabtop.c:122
msgid " s: sort by object size\n"
msgstr " s: nach Objektgröße sortieren\n"

#: src/slabtop.c:123
msgid " u: sort by cache utilization\n"
msgstr " u: nach Cache-Auslastung sortieren\n"

#: src/slabtop.c:186 src/slabtop.c:197
msgid "Cannot combine -d and -o options"
msgstr ""

#: src/slabtop.c:188
msgid "illegal delay"
msgstr "ungültige Verzögerung"

#: src/slabtop.c:190 src/tload.c:142 src/vmstat.c:1046
msgid "delay must be positive integer"
msgstr "Verzögerung muss eine positive Ganzzahl sein"

#: src/slabtop.c:234
msgid "Error getting slab summary results"
msgstr ""

#. Translation Hint: Next five strings must not
#. * exceed a length of 35 characters.
#: src/slabtop.c:240
#, no-c-format
msgid "Active / Total Objects (% used)"
msgstr "Objekte aktiv / gesamt (% benutzt)"

#: src/slabtop.c:246
#, no-c-format
msgid "Active / Total Slabs (% used)"
msgstr "Slabs aktiv / gesamt (% benutzt)"

#: src/slabtop.c:252
#, no-c-format
msgid "Active / Total Caches (% used)"
msgstr "Caches aktiv / gesamt (% benutzt)"

#: src/slabtop.c:258
#, no-c-format
msgid "Active / Total Size (% used)"
msgstr "Größe aktiv / gesamt (% benutzt)"

#: src/slabtop.c:263
msgid "Minimum / Average / Maximum Object"
msgstr ""

#. Translation Hint: Please keep alignment of the
#. * following intact.
#: src/slabtop.c:274
msgid "  OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME"
msgstr ""

#: src/slabtop.c:311 src/vmstat.c:764
msgid "Unable to create slabinfo structure"
msgstr ""

#: src/slabtop.c:316
msgid "terminal setting retrieval"
msgstr ""

#: src/slabtop.c:332 src/vmstat.c:771
msgid "Unable to get slabinfo node data"
msgstr ""

#: src/slabtop.c:338 src/vmstat.c:773
#, fuzzy
msgid "Unable to sort slab nodes"
msgstr "Prozess kann nicht geforkt werden"

#: src/sysctl.c:113
#, c-format
msgid "Path is not under %s: %s"
msgstr ""

#: src/sysctl.c:131
#, c-format
msgid "separators should not be repeated: %s"
msgstr "Trenner sollten nicht wiederholt werden: %s"

#: src/sysctl.c:227
#, c-format
msgid " %s [options] [variable[=value] ...]\n"
msgstr " %s [Optionen] [Variable[=Wert] …]\n"

#: src/sysctl.c:230
msgid "  -a, --all            display all variables\n"
msgstr "  -a, --all            Alle Variablen anzeigen\n"

#: src/sysctl.c:231
msgid "  -A                   alias of -a\n"
msgstr "  -A                   Alias für -a\n"

#: src/sysctl.c:232
msgid "  -X                   alias of -a\n"
msgstr "  -X                   Alias für -a\n"

#: src/sysctl.c:233
msgid "      --deprecated     include deprecated parameters to listing\n"
msgstr "      --deprecated     auch nicht mehr genutzte Parameter auflisten\n"

#: src/sysctl.c:234
msgid "      --dry-run        Print the key and values but do not write\n"
msgstr ""

#: src/sysctl.c:235
msgid "  -b, --binary         print value without new line\n"
msgstr "  -b, --binary         Wert ohne neue Zeile ausgeben\n"

#: src/sysctl.c:236
msgid "  -e, --ignore         ignore unknown variables errors\n"
msgstr ""
"  -e, --ignore         Fehler durch unbekannte Variablen\n"
"                       ignorieren\n"

#: src/sysctl.c:237
msgid "  -N, --names          print variable names without values\n"
msgstr "  -N, --names          Variablennamen ohne Werte ausgeben\n"

#: src/sysctl.c:238
msgid "  -n, --values         print only values of the given variable(s)\n"
msgstr "  -n, --values         nur Werte der angegebenen Variablen ausgeben\n"

#: src/sysctl.c:239
msgid "  -p, --load[=<file>]  read values from file\n"
msgstr "  -p, --load[=<Datei>] Werte aus einer Datei lesen\n"

#: src/sysctl.c:240
msgid "  -f                   alias of -p\n"
msgstr "  -f                   Alias für -p\n"

#: src/sysctl.c:241
msgid "      --system         read values from all system directories\n"
msgstr "      --system         Werte aus allen Systemverzeichnissen lesen\n"

#: src/sysctl.c:242
msgid ""
"  -r, --pattern <expression>\n"
"                       select setting that match expression\n"
msgstr ""
"  -r, --pattern <Ausdruck>\n"
"                       Einstellung auswählen, die diesem Ausdruck\n"
"                       entspricht\n"

#: src/sysctl.c:244
msgid "  -q, --quiet          do not echo variable set\n"
msgstr "  -q, --quiet          Setzen von Variablen nicht bestätigen\n"

#: src/sysctl.c:245
msgid "  -w, --write          enable writing a value to variable\n"
msgstr "  -w, --write          Setzen von Werten für Variablen aktivieren\n"

#: src/sysctl.c:246
msgid "  -o                   does nothing\n"
msgstr "  -o                   nichts tun\n"

#: src/sysctl.c:247
msgid "  -x                   does nothing\n"
msgstr "  -x                   nichts tun\n"

#: src/sysctl.c:248
msgid "  -d                   alias of -h\n"
msgstr "  -d                   Alias für -h\n"

#: src/sysctl.c:329 src/sysctl.c:390
#, c-format
msgid "\"%s\" is an unknown key"
msgstr "»%s« ist ein unbekannter Schlüssel"

#: src/sysctl.c:352 src/sysctl.c:508 src/sysctl.c:545
#, c-format
msgid "cannot stat %s"
msgstr "der Aufruf von stat für %s ist nicht möglich"

#: src/sysctl.c:395 src/sysctl.c:437
#, c-format
msgid "permission denied on key '%s'"
msgstr "Zugriff verweigert auf Schlüssel »%s«"

#: src/sysctl.c:402 src/sysctl.c:454
#, c-format
msgid "reading key \"%s\""
msgstr "Schlüssel »%s« wird gelesen"

#: src/sysctl.c:492
#, c-format
msgid "unable to open directory \"%s\""
msgstr "Verzeichnis »%s« kann nicht geöffnet werden"

#: src/sysctl.c:557
msgid "strdup key"
msgstr ""

#: src/sysctl.c:563 src/sysctl.c:569 src/sysctl.c:602
#, c-format
msgid "setting key \"%s\""
msgstr "Schlüssel »%s« wird gesetzt"

#: src/sysctl.c:579
#, c-format
msgid "\"%s\" is an unknown key%s"
msgstr "»%s« ist ein unbekannter Schlüssel%s"

#: src/sysctl.c:580 src/sysctl.c:589 src/sysctl.c:593
msgid ", ignoring"
msgstr ", wird ignoriert"

#: src/sysctl.c:588
#, c-format
msgid "permission denied on key \"%s\"%s"
msgstr "Zugriff verweigert auf Schlüssel »%s«%s"

#: src/sysctl.c:592
#, c-format
msgid "setting key \"%s\"%s"
msgstr "Schlüssel »%s«%s wird gesetzt"

#: src/sysctl.c:667
#, c-format
msgid "%s(%d): invalid syntax, continuing..."
msgstr "%s(%d): ungültige Syntax, es wird fortgefahren …"

#: src/sysctl.c:759
#, c-format
msgid ""
"GLOB_TILDE is not supported on your platform, the tilde in \"%s\" won't be "
"expanded."
msgstr ""
"GLOB_TILDE wird auf Ihrer Plattform nicht unterstützt, die Tilde in »%s« "
"wird nicht expandiert."

#: src/sysctl.c:765
msgid "glob failed"
msgstr "glob ist fehlgeschlagen"

#: src/sysctl.c:771
#, c-format
msgid "cannot open \"%s\""
msgstr "»%s« kann nicht geöffnet werden"

#: src/sysctl.c:875 src/sysctl.c:882
#, c-format
msgid "* Applying %s ...\n"
msgstr "* %s wird angewendet …\n"

#: src/sysctl.c:1048
#, c-format
msgid ""
"no variables specified\n"
"Try `%s --help' for more information."
msgstr ""
"keine Variablen angegeben\n"
"Rufen Sie »%s --help« auf für weitere Informationen."

#: src/sysctl.c:1052
#, c-format
msgid ""
"options -N and -q cannot coexist\n"
"Try `%s --help' for more information."
msgstr ""
"die Optionen -N und -q können nicht zusammen verwendet werden\n"
"Rufen Sie »%s --help« auf für weitere Informationen."

#: src/tload.c:75 src/tload.c:77
msgid "screen too small or too large"
msgstr "Bildschirm zu klein oder zu groß"

#: src/tload.c:80
msgid "screen too small"
msgstr "Bildschirm zu klein"

#: src/tload.c:96
#, c-format
msgid " %s [options] [tty]\n"
msgstr " %s [Optionen] [tty]\n"

#: src/tload.c:98
msgid " -d, --delay <secs>  update delay in seconds\n"
msgstr " -d, --delay <sek>   Aktualisierungsverzögerung in Sekunden\n"

#: src/tload.c:99
msgid " -s, --scale <num>   vertical scale\n"
msgstr " -s, --scale <Zahl>  vertikaler Maßstab\n"

#: src/tload.c:137
msgid "scale cannot be negative"
msgstr "Maßstab kann nicht negativ sein"

#: src/tload.c:144 src/vmstat.c:1048
msgid "too large delay value"
msgstr "Verzögerungswert ist zu groß"

#: src/tload.c:159
msgid "can not open tty"
msgstr "tty konnte nicht geöffnet werden"

#: src/tload.c:182
msgid "Load average file /proc/loadavg does not exist"
msgstr ""

#: src/tload.c:185
#, fuzzy
msgid "Unable to get load average"
msgstr "%13lu %s Gesamtspeicher\n"

#: src/tload.c:227 src/tload.c:229
msgid "writing to tty failed"
msgstr "Schreiben in tty fehlgeschlagen"

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  The following line pairs contain only plain text and consist of:
#. .     1) a field name/column header - mostly upper case
#. .     2) the related description    - both upper and lower case
#. .
#. .  To avoid truncation on the main top display, each column header
#. .  is noted with its maximum size, while a few are 'variable' width.
#. .  Names for the latter should probably be 10 or fewer characters.
#. .
#. .  Those fields shown with a '+' are also eligible for user resizing
#. .  using the 'X' command. That means the default width might produce
#. .  truncation but need not if widened (see the man page 'X' command).
#. .
#. .  All headers are subject to a maximum of 8 on the Fields Management
#. .  screen where truncation is entirely acceptable.
#. .
#. .  The associated descriptions are always limited to 20 characters,
#. .  and are used only on the Fields Management screen.
#. .
#. .  In all cases, fewer characters are just fine.
#. .
#. Translation Hint: maximum 'PID' = 5
#: src/top/top_nls.c:145
msgid "PID"
msgstr "PID"

#: src/top/top_nls.c:146
msgid "Process Id"
msgstr "Prozess‐ID"

#. Translation Hint: maximum 'PPID' = 5
#: src/top/top_nls.c:148
msgid "PPID"
msgstr "PPID"

#: src/top/top_nls.c:149
msgid "Parent Process pid"
msgstr "PID des Elternprozesses"

#. Translation Hint: maximum 'UID' = 5 +
#: src/top/top_nls.c:151
msgid "UID"
msgstr "UID"

#: src/top/top_nls.c:152
msgid "Effective User Id"
msgstr "Effektive Benutzer‐ID"

#. Translation Hint: maximum 'USER' = 8 +
#: src/top/top_nls.c:154 src/w.c:661
msgid "USER"
msgstr "USER"

#: src/top/top_nls.c:155
msgid "Effective User Name"
msgstr "Effektiver Benutzername"

#. Translation Hint: maximum 'RUID' = 5 +
#: src/top/top_nls.c:157
msgid "RUID"
msgstr "RUID"

#: src/top/top_nls.c:158
msgid "Real User Id"
msgstr "Reale Benutzer‐ID"

#. Translation Hint: maximum 'RUSER' = 8 +
#: src/top/top_nls.c:160
msgid "RUSER"
msgstr "RUSER"

#: src/top/top_nls.c:161
msgid "Real User Name"
msgstr "Realer Benutzername"

#. Translation Hint: maximum 'SUID' = 5 +
#: src/top/top_nls.c:163
msgid "SUID"
msgstr "SUID"

#: src/top/top_nls.c:164
msgid "Saved User Id"
msgstr "Gespeicherte Benutzer‐ID"

#. Translation Hint: maximum 'SUSER' = 8 +
#: src/top/top_nls.c:166
msgid "SUSER"
msgstr "SUSER"

#: src/top/top_nls.c:167
msgid "Saved User Name"
msgstr "Gespeicherter Benutzername"

#. Translation Hint: maximum 'GID' = 5 +
#: src/top/top_nls.c:169
msgid "GID"
msgstr "GID"

#: src/top/top_nls.c:170
msgid "Group Id"
msgstr "Gruppenkennung"

#. Translation Hint: maximum 'GROUP' = 8 +
#: src/top/top_nls.c:172
msgid "GROUP"
msgstr "GRUPPE"

#: src/top/top_nls.c:173
msgid "Group Name"
msgstr "Gruppenname"

#. Translation Hint: maximum 'PGRP' = 5
#: src/top/top_nls.c:175
msgid "PGRP"
msgstr "PGRP"

#: src/top/top_nls.c:176
msgid "Process Group Id"
msgstr "Prozessgruppenkennung"

#. Translation Hint: maximum 'TTY' = 8 +
#: src/top/top_nls.c:178
msgid "TTY"
msgstr "TTY"

#: src/top/top_nls.c:179
msgid "Controlling Tty"
msgstr "Steuernde TTY"

#. Translation Hint: maximum 'TPGID' = 5
#: src/top/top_nls.c:181
msgid "TPGID"
msgstr "TPGID"

#: src/top/top_nls.c:182
msgid "Tty Process Grp Id"
msgstr ""

#. Translation Hint: maximum 'SID' = 5
#: src/top/top_nls.c:184
msgid "SID"
msgstr "SID"

#: src/top/top_nls.c:185
msgid "Session Id"
msgstr "Sitzungs-ID"

#. Translation Hint: maximum 'PR' = 3
#: src/top/top_nls.c:187
msgid "PR"
msgstr "PR"

#: src/top/top_nls.c:188
msgid "Priority"
msgstr "Priorität"

#. Translation Hint: maximum 'NI' = 3
#: src/top/top_nls.c:190
msgid "NI"
msgstr "NI"

#: src/top/top_nls.c:191
msgid "Nice Value"
msgstr "Nice-Wert"

#. Translation Hint: maximum 'nTH' = 3
#: src/top/top_nls.c:193
msgid "nTH"
msgstr "nTH"

#: src/top/top_nls.c:194
msgid "Number of Threads"
msgstr "Anzahl der Threads"

#. Translation Hint: maximum 'P' = 1
#: src/top/top_nls.c:196
msgid "P"
msgstr "P"

#: src/top/top_nls.c:197
msgid "Last Used Cpu (SMP)"
msgstr "Zuletzt benutzte CPU (SMP)"

#. Translation Hint: maximum '%CPU' = 4
#: src/top/top_nls.c:199
#, c-format
msgid "%CPU"
msgstr "%CPU"

#: src/top/top_nls.c:200
msgid "CPU Usage"
msgstr "CPU-Auslastung"

#. Translation Hint: maximum '' = 6
#: src/top/top_nls.c:202
msgid "TIME"
msgstr "ZEIT"

#: src/top/top_nls.c:203
msgid "CPU Time"
msgstr "CPU-Zeit"

#. Translation Hint: maximum 'TIME+' = 9
#: src/top/top_nls.c:205
msgid "TIME+"
msgstr "ZEIT+"

#: src/top/top_nls.c:206
msgid "CPU Time, hundredths"
msgstr "CPU-Zeit, Hundertstel"

#. Translation Hint: maximum '%MEM' = 4
#: src/top/top_nls.c:208
msgid "%MEM"
msgstr "%MEM"

#: src/top/top_nls.c:209
msgid "Memory Usage (RES)"
msgstr "Speichernutzung (RES)"

#. Translation Hint: maximum 'VIRT' = 7
#: src/top/top_nls.c:211
msgid "VIRT"
msgstr "VIRT"

#: src/top/top_nls.c:212
msgid "Virtual Image (KiB)"
msgstr "Virtuelles Image (KiB)"

#. Translation Hint: maximum 'SWAP' = 6
#: src/top/top_nls.c:214
msgid "SWAP"
msgstr "SWAP"

#: src/top/top_nls.c:215
msgid "Swapped Size (KiB)"
msgstr "Auslagerungsgröße (KiB)"

#. Translation Hint: maximum 'RES' = 6
#: src/top/top_nls.c:217
msgid "RES"
msgstr "RES"

#: src/top/top_nls.c:218
msgid "Resident Size (KiB)"
msgstr "Hauptspeicherbelegung (KiB)"

#. Translation Hint: maximum 'CODE' = 4
#: src/top/top_nls.c:220
msgid "CODE"
msgstr "CODE"

#: src/top/top_nls.c:221
msgid "Code Size (KiB)"
msgstr "Code-Größe (KiB)"

#. Translation Hint: maximum 'DATA' = 7
#: src/top/top_nls.c:223
msgid "DATA"
msgstr "DATEN"

#: src/top/top_nls.c:224
msgid "Data+Stack (KiB)"
msgstr "Daten+Stack (KiB)"

#. Translation Hint: maximum 'SHR' = 6
#: src/top/top_nls.c:226
msgid "SHR"
msgstr "SHR"

#: src/top/top_nls.c:227
msgid "Shared Memory (KiB)"
msgstr "Gemeinsam genutzter Speicher (KiB)"

#. Translation Hint: maximum 'nMaj' = 4
#: src/top/top_nls.c:229
msgid "nMaj"
msgstr "nMaj"

#: src/top/top_nls.c:230
msgid "Major Page Faults"
msgstr ""

#. Translation Hint: maximum 'nMin' = 4
#: src/top/top_nls.c:232
msgid "nMin"
msgstr "nMin"

#: src/top/top_nls.c:233
msgid "Minor Page Faults"
msgstr ""

#. Translation Hint: maximum 'nDRT' = 4
#: src/top/top_nls.c:235
msgid "nDRT"
msgstr "nDRT"

#: src/top/top_nls.c:236
msgid "Dirty Pages Count"
msgstr "Anzahl der Dirty Pages"

#. Translation Hint: maximum 'S' = 1
#: src/top/top_nls.c:238
msgid "S"
msgstr "S"

#: src/top/top_nls.c:239
msgid "Process Status"
msgstr "Prozessstatus"

#. Translation Hint: maximum 'COMMAND' = variable
#: src/top/top_nls.c:241
msgid "COMMAND"
msgstr "BEFEHL"

#: src/top/top_nls.c:242
msgid "Command Name/Line"
msgstr "Befehlsname/-zeile"

#. Translation Hint: maximum 'WCHAN' = 10 +
#: src/top/top_nls.c:244
msgid "WCHAN"
msgstr "WCHAN"

#: src/top/top_nls.c:245
msgid "Sleeping in Function"
msgstr "Schläft"

#. Translation Hint: maximum 'Flags' = 8
#: src/top/top_nls.c:247
msgid "Flags"
msgstr "Schalter"

#: src/top/top_nls.c:248
msgid "Task Flags <sched.h>"
msgstr "Prozess-Flags <sched.h>"

#. Translation Hint: maximum 'CGROUPS' = variable
#: src/top/top_nls.c:250
msgid "CGROUPS"
msgstr "CGROUPS"

#: src/top/top_nls.c:251
msgid "Control Groups"
msgstr "Kontrollgruppen"

#. Translation Hint: maximum 'SUPGIDS' = variable
#: src/top/top_nls.c:253
msgid "SUPGIDS"
msgstr "SUPGIDS"

#: src/top/top_nls.c:254
msgid "Supp Groups IDs"
msgstr "IDs zusätzlicher Gruppen"

#. Translation Hint: maximum 'SUPGRPS' = variable
#: src/top/top_nls.c:256
msgid "SUPGRPS"
msgstr "SUPGRPS"

#: src/top/top_nls.c:257
msgid "Supp Groups Names"
msgstr "Namen zusätzlicher Gruppen"

#. Translation Hint: maximum 'TGID' = 5
#: src/top/top_nls.c:259
msgid "TGID"
msgstr "TGID"

#: src/top/top_nls.c:260
msgid "Thread Group Id"
msgstr "Threadgruppen-ID"

#. Translation Hint: maximum 'OOMa' = 5
#: src/top/top_nls.c:262
msgid "OOMa"
msgstr "OOMa"

#: src/top/top_nls.c:263
msgid "OOMEM Adjustment"
msgstr "OOMEM-Anpassung"

#. Translation Hint: maximum 'OOMs' = 4
#: src/top/top_nls.c:265
msgid "OOMs"
msgstr "OOMs"

#: src/top/top_nls.c:266
msgid "OOMEM Score current"
msgstr "OOMEM-Rang aktuell"

#. Translation Hint: maximum 'ENVIRON' = variable
#: src/top/top_nls.c:268
msgid "ENVIRON"
msgstr "UMGEBUNG"

#. Translation Hint: the abbreviation 'vars' below is shorthand for
#. 'variables'
#: src/top/top_nls.c:271
msgid "Environment vars"
msgstr "Umgebungsvariablen"

#. Translation Hint: maximum 'vMj' = 3
#: src/top/top_nls.c:273
msgid "vMj"
msgstr "vMj"

#: src/top/top_nls.c:274
msgid "Major Faults delta"
msgstr ""

#. Translation Hint: maximum 'vMn' = 3
#: src/top/top_nls.c:276
msgid "vMn"
msgstr "vMn"

#: src/top/top_nls.c:277
msgid "Minor Faults delta"
msgstr ""

#. Translation Hint: maximum 'USED' = 6
#: src/top/top_nls.c:279
msgid "USED"
msgstr "USED"

#: src/top/top_nls.c:280
msgid "Res+Swap Size (KiB)"
msgstr ""

#. Translation Hint: maximum 'nsIPC' = 10 +
#: src/top/top_nls.c:282
msgid "nsIPC"
msgstr "nsIPC"

#: src/top/top_nls.c:283
msgid "IPC namespace Inode"
msgstr "Inode für IPC-Namensraum"

#. Translation Hint: maximum 'nsMNT' = 10 +
#: src/top/top_nls.c:285
msgid "nsMNT"
msgstr "nsMNT"

#: src/top/top_nls.c:286
msgid "MNT namespace Inode"
msgstr "Inode für MNT-Namensraum"

#. Translation Hint: maximum 'nsNET' = 10 +
#: src/top/top_nls.c:288
msgid "nsNET"
msgstr "nsNET"

#: src/top/top_nls.c:289
msgid "NET namespace Inode"
msgstr "Inode für NET-Namensraum"

#. Translation Hint: maximum 'nsPID' = 10 +
#: src/top/top_nls.c:291
msgid "nsPID"
msgstr "nsPID"

#: src/top/top_nls.c:292
msgid "PID namespace Inode"
msgstr "Inode für Prozess-ID-Namensraum"

#. Translation Hint: maximum 'nsUSER' = 10 +
#: src/top/top_nls.c:294
msgid "nsUSER"
msgstr "nsUSER"

#: src/top/top_nls.c:295
msgid "USER namespace Inode"
msgstr "Inode für Benutzer-Namensraum"

#. Translation Hint: maximum 'nsUTS' = 10 +
#: src/top/top_nls.c:297
msgid "nsUTS"
msgstr "nsUTS"

#: src/top/top_nls.c:298
msgid "UTS namespace Inode"
msgstr "Inode für UTS-Namensraum"

#. Translation Hint: maximum 'LXC' = 8 +
#: src/top/top_nls.c:300
msgid "LXC"
msgstr "LXC"

#: src/top/top_nls.c:301
msgid "LXC container name"
msgstr "LXC-Containername"

#. Translation Hint: maximum 'RSan' = 6
#: src/top/top_nls.c:303
msgid "RSan"
msgstr "RSan"

#: src/top/top_nls.c:304
msgid "RES Anonymous (KiB)"
msgstr ""

#. Translation Hint: maximum 'RSfd' = 6
#: src/top/top_nls.c:306
msgid "RSfd"
msgstr "RSfd"

#: src/top/top_nls.c:307
msgid "RES File-based (KiB)"
msgstr "RES dateibasiert (KiB)"

#. Translation Hint: maximum 'RSlk' = 6
#: src/top/top_nls.c:309
msgid "RSlk"
msgstr "RSlk"

#: src/top/top_nls.c:310
msgid "RES Locked (KiB)"
msgstr "RES gesperrt (KiB)"

#. Translation Hint: maximum 'RSsh' = 6
#: src/top/top_nls.c:312
msgid "RSsh"
msgstr "RSsh"

#: src/top/top_nls.c:313
msgid "RES Shared (KiB)"
msgstr "Hptsp. gemns. (KiB)"

#. Translation Hint: maximum 'CGNAME' = variable
#: src/top/top_nls.c:315
msgid "CGNAME"
msgstr "CGNAME"

#: src/top/top_nls.c:316
msgid "Control Group name"
msgstr "Kontrollgruppenname"

#. Translation Hint: maximum 'NU' = 2
#: src/top/top_nls.c:318
msgid "NU"
msgstr "NU"

#: src/top/top_nls.c:319
msgid "Last Used NUMA node"
msgstr "Zuletzt benutzter NUMA-Node"

#. Translation Hint: maximum 'LOGID' = 5 +
#: src/top/top_nls.c:321
msgid "LOGID"
msgstr ""

#: src/top/top_nls.c:322
#, fuzzy
msgid "Login User Id"
msgstr "Reale Benutzer‐ID"

#. Translation Hint: maximum 'EXE' = variable
#: src/top/top_nls.c:324
msgid "EXE"
msgstr ""

#: src/top/top_nls.c:325
msgid "Executable Path"
msgstr ""

#: src/top/top_nls.c:331
msgid "Res Mem (smaps), KiB"
msgstr ""

#. Translation Hint: maximum 'PSS' = 6
#: src/top/top_nls.c:333
#, fuzzy
msgid "PSS"
msgstr "RSS"

#: src/top/top_nls.c:334
msgid "Proportion RSS,  KiB"
msgstr ""

#. Translation Hint: maximum 'PSan' = 6
#: src/top/top_nls.c:336
msgid "PSan"
msgstr ""

#: src/top/top_nls.c:337
msgid "Proportion Anon, KiB"
msgstr ""

#. Translation Hint: maximum 'PSfd' = 6
#: src/top/top_nls.c:339
msgid "PSfd"
msgstr ""

#: src/top/top_nls.c:340
msgid "Proportion File, KiB"
msgstr ""

#. Translation Hint: maximum 'PSsh' = 6
#: src/top/top_nls.c:342
msgid "PSsh"
msgstr ""

#: src/top/top_nls.c:343
msgid "Proportion Shrd, KiB"
msgstr ""

#. Translation Hint: maximum 'USS' = 6
#: src/top/top_nls.c:345
#, fuzzy
msgid "USS"
msgstr "RSS"

#: src/top/top_nls.c:346
msgid "Unique RSS, KiB"
msgstr ""

#. Translation Hint: maximum 'ioR' = 6
#: src/top/top_nls.c:348
msgid "ioR"
msgstr ""

#: src/top/top_nls.c:349
msgid "I/O Bytes Read"
msgstr ""

#. Translation Hint: maximum 'ioRop' = 5
#: src/top/top_nls.c:351
msgid "ioRop"
msgstr ""

#: src/top/top_nls.c:352
msgid "I/O Read Operations"
msgstr ""

#. Translation Hint: maximum 'ioW' = 6
#: src/top/top_nls.c:354
msgid "ioW"
msgstr ""

#: src/top/top_nls.c:355
msgid "I/O Bytes Written"
msgstr ""

#. Translation Hint: maximum 'ioWop' = 5
#: src/top/top_nls.c:357
msgid "ioWop"
msgstr ""

#: src/top/top_nls.c:358
msgid "I/O Write Operations"
msgstr ""

#. Translation Hint: maximum 'AGID' = 5
#: src/top/top_nls.c:360
msgid "AGID"
msgstr ""

#: src/top/top_nls.c:361
msgid "Autogroup Identifier"
msgstr ""

#. Translation Hint: maximum 'AGNI' = 4
#: src/top/top_nls.c:363
msgid "AGNI"
msgstr ""

#: src/top/top_nls.c:364
#, fuzzy
msgid "Autogroup Nice Value"
msgstr "Nice-Wert"

#. Translation Hint: maximum 'STARTED' = 7
#: src/top/top_nls.c:366
msgid "STARTED"
msgstr ""

#: src/top/top_nls.c:367
msgid "Start Time from boot"
msgstr ""

#. Translation Hint: maximum 'ELAPSED' = 7
#: src/top/top_nls.c:369
msgid "ELAPSED"
msgstr ""

#: src/top/top_nls.c:370
msgid "Elapsed Running Time"
msgstr ""

#. Translation Hint: maximum '%CUU' = 6
#: src/top/top_nls.c:372
#, c-format
msgid "%CUU"
msgstr ""

#: src/top/top_nls.c:373
msgid "CPU Utilization"
msgstr ""

#. Translation Hint: maximum '%CUC' = 7
#: src/top/top_nls.c:375
#, c-format
msgid "%CUC"
msgstr ""

#: src/top/top_nls.c:376
msgid "Utilization + child"
msgstr ""

#. Translation Hint: maximum 'nsCGROUP' = 10 +
#: src/top/top_nls.c:378
#, fuzzy
msgid "nsCGROUP"
msgstr "CGROUPS"

#: src/top/top_nls.c:379
#, fuzzy
msgid "CGRP namespace Inode"
msgstr "Inode für IPC-Namensraum"

#. Translation Hint: maximum 'nsTIME' = 10 +
#: src/top/top_nls.c:381
#, fuzzy
msgid "nsTIME"
msgstr "ZEIT"

#: src/top/top_nls.c:382
#, fuzzy
msgid "TIME namespace Inode"
msgstr "Inode für IPC-Namensraum"

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  This group of lines contains both plain text and c-format strings.
#. .
#. .  Some strings reflect switches used to affect the running program
#. .  and should not be translated without also making corresponding
#. .  c-code logic changes.
#. .
#: src/top/top_nls.c:402
#, c-format
msgid ""
"\tsignal %d (%s) was caught by %s, please\n"
"\tsend bug reports to <procps@freelists.org>\n"
msgstr ""
"\tSignal %d (%s) wurde von %s empfangen, bitte\n"
"\tFehlerbericht an <procps@freelists.org> senden\n"

#: src/top/top_nls.c:405
#, c-format
msgid ""
"inappropriate '%s'\n"
"Usage:\n"
"  %s%s"
msgstr ""
"unzulässiges »%s«\n"
"Aufruf:\n"
"  %s%s"

#: src/top/top_nls.c:435
#, c-format
msgid "bad delay interval '%s'"
msgstr "ungültiges Verzögerungsintervall »%s«"

#: src/top/top_nls.c:436
#, c-format
msgid "bad iterations argument '%s'"
msgstr "Falsches Argument »%s« für Iterationen"

#: src/top/top_nls.c:437
#, c-format
msgid "pid limit (%d) exceeded"
msgstr "PID-Begrenzung (%d) überschritten"

#: src/top/top_nls.c:438
#, c-format
msgid "bad pid '%s'"
msgstr "ungültige PID »%s«"

#: src/top/top_nls.c:439
#, fuzzy, c-format
msgid "-%c argument missing"
msgstr "Fehlendes Argument"

#: src/top/top_nls.c:440
#, c-format
msgid "bad width arg '%s'"
msgstr "Falsches Breitenargument »%s«"

#: src/top/top_nls.c:441
#, fuzzy, c-format
msgid "unknown option '%s'"
msgstr ""
"Unbekannte Option »%c«\n"
"Aufruf:\n"
"  %s%s"

#: src/top/top_nls.c:442
msgid "-d disallowed in \"secure\" mode"
msgstr "-d ist im »sicheren« Modus deaktiviert"

#: src/top/top_nls.c:443
msgid "-d requires positive argument"
msgstr "-d benötigt ein positives Argument"

#: src/top/top_nls.c:444
msgid "On"
msgstr "An"

#: src/top/top_nls.c:445
msgid "Off"
msgstr "Aus"

#: src/top/top_nls.c:446
#, fuzzy, c-format
msgid "%s from %s"
msgstr "%s von %s\n"

#: src/top/top_nls.c:447
#, c-format
msgid "Forest mode %s"
msgstr "Baum-Modus %s"

#: src/top/top_nls.c:448
msgid "failed tty get"
msgstr ""

#: src/top/top_nls.c:449
#, c-format
msgid "failed tty set: %s"
msgstr "Setzen des TTY fehlgeschlagen: %s"

#: src/top/top_nls.c:450
msgid "Choose field group (1 - 4)"
msgstr "Feldgruppe wählen (1-4)"

#: src/top/top_nls.c:451
msgid "Command disabled, 'A' mode required"
msgstr "Befehl deaktiviert, der A-Modus ist erforderlich"

#: src/top/top_nls.c:452
#, c-format
msgid "Command disabled, activate %s with '-' or '_'"
msgstr "Befehl ist deaktiviert, aktivieren Sie %s mit »-« oder »_«"

#: src/top/top_nls.c:453
msgid "No colors to map!"
msgstr "Keine anwendbaren Farben!"

#: src/top/top_nls.c:454
#, c-format
msgid "Failed '%s' open: %s"
msgstr "Öffnen von »%s« ist fehlgeschlagen: %s"

#: src/top/top_nls.c:455
#, c-format
msgid "Wrote configuration to '%s'"
msgstr "Konfiguration wurde nach »%s« geschrieben"

#: src/top/top_nls.c:456
#, c-format
msgid "Change delay from %.1f to"
msgstr "Verzögerung von %.1f ändern auf"

#: src/top/top_nls.c:457
#, c-format
msgid "Show threads %s"
msgstr ""

#: src/top/top_nls.c:458
#, c-format
msgid "Irix mode %s"
msgstr "Irix-Modus %s"

#: src/top/top_nls.c:459
#, c-format
msgid "PID to signal/kill [default pid = %d]"
msgstr ""

#: src/top/top_nls.c:460
#, c-format
msgid "Send pid %d signal [%d/sigterm]"
msgstr ""

#: src/top/top_nls.c:461
#, c-format
msgid "Failed signal pid '%d' with '%d': %s"
msgstr ""

#: src/top/top_nls.c:462
msgid "Invalid signal"
msgstr "Ungültiges Signal"

#: src/top/top_nls.c:463
#, c-format
msgid "PID to renice [default pid = %d]"
msgstr ""

#: src/top/top_nls.c:464
#, c-format
msgid "Renice PID %d to value"
msgstr ""

#: src/top/top_nls.c:465
#, c-format
msgid "Failed renice of PID %d to %d: %s"
msgstr ""

#: src/top/top_nls.c:466
#, c-format
msgid "Rename window '%s' to (1-3 chars)"
msgstr "Fenster »%s« umbenennen in (1-3 Zeichen)"

#: src/top/top_nls.c:467
#, c-format
msgid "Cumulative time %s"
msgstr "Kumulierte Zeit %s"

#: src/top/top_nls.c:468
#, c-format
msgid "Maximum tasks = %d, change to (0 is unlimited)"
msgstr ""

#: src/top/top_nls.c:469
msgid "Invalid maximum"
msgstr "Ungültiges Maximum"

#: src/top/top_nls.c:470
msgid "Which user (blank for all)"
msgstr "Welcher Benutzer (leer lassen für alle)"

#: src/top/top_nls.c:471
msgid "Unknown command - try 'h' for help"
msgstr "Ungültiger Befehl. Geben Sie »h« ein für Hilfe."

#: src/top/top_nls.c:472
#, fuzzy, c-format
msgid "scroll coordinates: y = %d/%d (tasks), x = %d/%d (fields)"
msgstr "Bildlaufkoordinaten: y = %d/%d (Prozesse), x = %d/%d (Felder)"

#: src/top/top_nls.c:473
msgid "failed memory allocate"
msgstr "Speicherzuweisung ist fehlgeschlagen"

#: src/top/top_nls.c:474
msgid "failed memory re-allocate"
msgstr "erneute Speicherzuweisung ist fehlgeschlagen"

#: src/top/top_nls.c:475
msgid "Unacceptable floating point"
msgstr "Fließkommaausnahme"

#: src/top/top_nls.c:476
msgid "Invalid user"
msgstr "Ungültiger Benutzer"

#: src/top/top_nls.c:477
msgid "forest view"
msgstr "Baumansicht"

#: src/top/top_nls.c:478
msgid "failed pid maximum size test"
msgstr "Test für maximale PID-Größe fehlgeschlagen"

#: src/top/top_nls.c:479
msgid "failed number of cpus test"
msgstr "Überprüfung der CPU-Anzahl ist fehlgeschlagen"

#: src/top/top_nls.c:480
#, c-format
msgid "incompatible rcfile, you should delete '%s'"
msgstr "ungültige Konfigurationsdatei, Sie sollten »%s« löschen"

#: src/top/top_nls.c:481
#, c-format
msgid "window entry #%d corrupt, please delete '%s'"
msgstr "Fenstereintrag #%d beschädigt, bitte löschen Sie »%s«"

#: src/top/top_nls.c:482
msgid "Unavailable in secure mode"
msgstr "Im Sicherheitsmodus nicht verfügbar"

#: src/top/top_nls.c:483
msgid "Only 1 cpu detected"
msgstr "nNur eine CPU wurde erkannt"

#: src/top/top_nls.c:484
msgid "Unacceptable integer"
msgstr "Ungültige Ganzzahl"

#: src/top/top_nls.c:485
msgid "conflicting process selections (U/p/u)"
msgstr "widersprüchliche Prozessauswahlen (U/p/u)"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 kibibytes (1024 bytes)
#: src/top/top_nls.c:488
msgid "KiB"
msgstr "KiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 mebibytes (1,048,576 bytes)
#: src/top/top_nls.c:491
msgid "MiB"
msgstr "MiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 gibibytes (1,073,741,824 bytes)
#: src/top/top_nls.c:494
msgid "GiB"
msgstr "GiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 tebibytes (1,099,511,627,776 bytes)
#: src/top/top_nls.c:497
msgid "TiB"
msgstr "TiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 pebibytes (1,024 tebibytes)
#: src/top/top_nls.c:500
msgid "PiB"
msgstr "PiB"

#. Translation Hint: This is an abbreviation (limit 3 characters) for:
#. .                 exbibytes (1,024 pebibytes)
#: src/top/top_nls.c:503
msgid "EiB"
msgstr "EiB"

#: src/top/top_nls.c:504
msgid "Threads"
msgstr "Threads"

#: src/top/top_nls.c:505
msgid "Tasks"
msgstr "Tasks"

#. Translation Hint: The following "word" is meant to represent either a single
#. .                 cpu or all of the processors in a multi-processor computer
#. .                 (should be exactly 6 characters, excluding leading % & colon)
#: src/top/top_nls.c:509
#, fuzzy, c-format
msgid "%Cpu(s):"
msgstr "%CPU(s):"

#. Translation Hint: The following "word" is meant to represent a single processor
#. and 'the Cp' prefix will be combined with a  core id: 'p', 'e' or 'u'
#. .                 (if 'Cp' is translated, it must be exactly 2 characters long)
#: src/top/top_nls.c:513
#, fuzzy, c-format
msgid "%%Cp%c%-3d:"
msgstr "%%CPU%-3d:"

#. Translation Hint: The following word "another" must have 1 trailing space
#: src/top/top_nls.c:515
msgid "another "
msgstr "andere "

#: src/top/top_nls.c:516
msgid "Locate next inactive, use \"L\""
msgstr ""

#: src/top/top_nls.c:517
msgid "Locate string"
msgstr ""

#: src/top/top_nls.c:518
#, c-format
msgid "%s\"%s\" not found"
msgstr "%s»%s« nicht gefunden"

#: src/top/top_nls.c:519
#, c-format
msgid "width incr is %d, change to (0 default, -1 auto)"
msgstr ""

#: src/top/top_nls.c:520
msgid "rcfile has inspect/other-filter error(s), save anyway?"
msgstr ""

#: src/top/top_nls.c:521
#, c-format
msgid "unrecognized field name '%s'"
msgstr "nicht erkannter Feldname »%s«"

#: src/top/top_nls.c:522
msgid "even using field names only, window is now too small"
msgstr "selbst nur mit Feldnamen ist das Fenster jetzt zu klein"

#: src/top/top_nls.c:523
msgid "Open Files"
msgstr "Offene Dateien"

#: src/top/top_nls.c:524
msgid "NUMA Info"
msgstr "NUMA-Info"

#: src/top/top_nls.c:525
msgid "Log"
msgstr "Protokoll"

#: src/top/top_nls.c:526
msgid ""
"the '=' key will eventually show the actual file read or command(s) "
"executed ..."
msgstr ""
"Die Taste »=« zeigt eventuell die tatsächlich gelesene Datei oder den/die "
"ausgeführte(n) Befehl(e) …"

#: src/top/top_nls.c:527
msgid "demo"
msgstr "Demo"

#: src/top/top_nls.c:528
#, fuzzy, c-format
msgid ""
"This is simulated output representing the contents of some file or the "
"output\n"
"from some command.  Exactly which commands and/or files are solely up to "
"you.\n"
"\n"
"Although this text is for information purposes only, it can still be "
"scrolled\n"
"and searched like real output will be.  You are encouraged to experiment "
"with\n"
"those features as explained in the prologue above.\n"
"\n"
"To enable real Inspect functionality, entries must be added to the end of "
"the\n"
"top personal personal configuration file.  You could use your favorite "
"editor\n"
"to accomplish this, taking care not to disturb existing entries.\n"
"\n"
"Another way to add entries is illustrated below, but it risks overwriting "
"the\n"
"rcfile.  Redirected echoes must not replace (>) but append (>>) to that "
"file.\n"
"\n"
"  /bin/echo -e \"pipe\\tOpen Files\\tlsof -P -p %d 2>&1\" >> ~/.toprc\n"
"  /bin/echo -e \"file\\tNUMA Info\\t/proc/%d/numa_maps\" >> ~/.toprc\n"
"  /bin/echo -e \"pipe\\tLog\\ttail -n200 /var/log/syslog | sort -Mr\" >> ~/."
"toprc\n"
"\n"
"If you don't know the location or name of the top rcfile, use the 'W' "
"command\n"
"and note those details.  After backing up the current rcfile, try issuing "
"the\n"
"above echoes exactly as shown, replacing '.toprc' as appropriate.  The "
"safest\n"
"approach would be to use copy then paste to avoid any typing mistakes.\n"
"\n"
"Finally, restart top to reveal what actual Inspect entries combined with "
"this\n"
"new command can offer.  The possibilities are endless, especially "
"considering\n"
"that 'pipe' type entries can include shell scripts too!\n"
"\n"
"For additional important information, please consult the top(1) man "
"document.\n"
"Then, enhance top with your very own customized 'file' and/or 'pipe' "
"entries.\n"
"\n"
"Enjoy!\n"
msgstr ""
"Dies ist eine simulierte Ausgabe, die den Inhalt einer Datei oder die "
"Ausgabe\n"
"eines Befehls darstellt. Die genauen Befehle und/oder Dateien sind Ihre "
"Sache.\n"
"\n"
"Obwohl dieser Text nur informativen Zwecken dient, kann er wie eine echte "
"Ausgabe\n"
"durchsucht werden. Experimentieren Sie ruhig damit, wie oben beschrieben.\n"
"\n"
"Um eine echte Inspektions-Funktionalität zu aktivieren, müssen Einträge am\n"
"Ende der persönlichen top-Konfigurationsdatei hinzugefügt werden. Sie "
"können\n"
"dazu Ihren bevorzugten Editor verwenden. Achten Sie bitte darauf, "
"vorhandene\n"
"Einträge nicht zu verändern.\n"
"\n"
"Ein weiterer Weg zum Hinzufügen von Einträgen ist nachfolgend beschrieben,\n"
"aber Sie riskieren dabei, dass die Konfigurationsdatei überschrieben wird.\n"
"Zurückgeführte Echos dürfen diese Datei nicht ersetzen (>), sondern müssen\n"
"angehängt werden.\n"
"\n"
"  /bin/echo -e \"pipe\\tOpen Files\\tlsof -P -p %d 2>&1\" >> ~/.toprc\n"
"  /bin/echo -e \"file\\tNUMA Info\\t/proc/%d/numa_maps\" >> ~/.toprc\n"
"  /bin/echo -e \"pipe\\tLog\\ttail -n200 /var/log/syslog | sort -Mr\" >> ~/."
"toprc\n"
"\n"
"Falls Sie den Ort oder den Namen der top-Konfigurationsdatei nicht kennen,\n"
"verwenden Sie den Befehl »W« und schauen Sie nach den ausgegebenen Details.\n"
"Versuchen Sie nach dem Sichern der aktuellen Konfigurationsdatei, versuchen\n"
"Sie die obigen Echos exakt wie angezeigt auszugeben, unter entsprechender\n"
"Ersetzung von ».toprc«. Der sicherste Weg wäre mittels Kopieren und "
"Einfügen,\n"
"um eventuelle Tippfehler zu vermeiden.\n"
"Zum Schluss starten Sie top neu, um zu sehen, welche neuen Befehle mit "
"diesen\n"
"neuen Inspektions-Einträgen nun möglich sind. Die Möglichkeiten sind "
"unbegrenzt,\n"
"speziell im Hinblick darauf, dass Einträge des Typs »pipe« auch Shell-"
"Skripte\n"
"enthalten können!\n"
"Weitere wichtige Informationen finden Sie in der Dokumentation. Erstellen "
"Sie\n"
"»Ihr« top mit benutzerdefinierten Einträgen der Typen »file« und »pipe«.\n"
"\n"
"Viel Spaß!\n"

#: src/top/top_nls.c:560
msgid "to enable 'Y' press <Enter> then type 'W' and restart top"
msgstr ""
"Um »Y« zu aktivieren, drücken Sie die Eingabetaste, geben »W« ein und "
"starten top neu"

#: src/top/top_nls.c:561
msgid "to enable 'Y' please consult the top man page (press Enter)"
msgstr ""
"Lesen Sie in der Handbuchseite zu top(1), wie Sie die Option »Y« aktivieren "
"können (Eingabetaste drücken)"

#: src/top/top_nls.c:562
#, c-format
msgid "Selection failed with: %s\n"
msgstr "Auswahl fehlgeschlagen mit: %s\n"

#: src/top/top_nls.c:563
#, c-format
msgid "unable to inspect, pid %d not found"
msgstr "Untersuchung nicht möglich, PID %d nicht gefunden"

#: src/top/top_nls.c:564
#, c-format
msgid "inspect at PID [default pid = %d]"
msgstr ""

#: src/top/top_nls.c:565
#, c-format
msgid "%s: %*d-%-*d lines, %*d-%*d columns, %lu bytes read"
msgstr "%s: %*d-%-*d Zeilen, %*d-%*d Spalten, %lu Bytes gelesen"

#: src/top/top_nls.c:566
#, fuzzy
msgid "patience please, working ..."
msgstr "Bitte warten Sie, wird ausgeführt …"

#: src/top/top_nls.c:567
msgid "working, use Ctrl-C to end ..."
msgstr "Wird ausgeführt, Strg-C zum Beenden …"

#. Translation Hint: Below are 2 abbreviations which can be as long as needed:
#. .                 FLD = FIELD, VAL = VALUE
#: src/top/top_nls.c:570
#, c-format
msgid "add filter #%d (%s) as: [!]FLD?VAL"
msgstr "Filter #%d (%s) hinzufügen als: [!]FELD?WERT"

#: src/top/top_nls.c:571
msgid "ignoring case"
msgstr "Groß-/Kleinschreibung ignorieren"

#: src/top/top_nls.c:572
msgid "case sensitive"
msgstr "Groß-/Kleinschreibung"

#: src/top/top_nls.c:573
msgid "duplicate filter was ignored"
msgstr "Filterduplikat wurde ignoriert"

#: src/top/top_nls.c:574
#, c-format
msgid "'%s' filter delimiter is missing"
msgstr "Filter-Trennzeichen »%s« fehlt"

#: src/top/top_nls.c:575
#, c-format
msgid "'%s' filter value is missing"
msgstr "Filterwert »%s« fehlt"

#: src/top/top_nls.c:576
msgid "include"
msgstr "einschließen"

#: src/top/top_nls.c:577
msgid "exclude"
msgstr "ausschließen"

#: src/top/top_nls.c:578
#, c-format
msgid "<Enter> to resume, filters: %s"
msgstr "<Eingabe> zum Fortsetzen, Filter: %s"

#: src/top/top_nls.c:579
msgid "none"
msgstr "keine"

#. Translation Hint: The following word 'Node' should be exactly
#. 4 characters, excluding leading %%, fmt chars & colon)
#: src/top/top_nls.c:582
#, fuzzy, c-format
msgid "%%Node%-2d:"
msgstr "%%Node%-2d:"

#: src/top/top_nls.c:583
#, c-format
msgid "expand which numa node (0-%d)"
msgstr ""

#: src/top/top_nls.c:584
#, fuzzy
msgid "invalid numa node"
msgstr "ungültiger Knoten"

#: src/top/top_nls.c:585
msgid "sorry, NUMA extensions unavailable"
msgstr "Entschuldigung, NUMA-Erweiterungen sind nicht verfügbar"

#. Translation Hint: 'Mem ' is an abbreviation for physical memory/ram
#. .                 'Swap' represents the linux swap file --
#. .                 please make both translations exactly 4 characters,
#. .                 padding with extra spaces as necessary
#: src/top/top_nls.c:590
msgid "Mem "
msgstr "Spch"

#: src/top/top_nls.c:591
msgid "Swap"
msgstr "Swap"

#: src/top/top_nls.c:592
#, c-format
msgid "library failed memory statistics, at %d: %s"
msgstr ""

#: src/top/top_nls.c:593
#, c-format
msgid "library failed cpu statistics, at %d: %s"
msgstr ""

#: src/top/top_nls.c:594
#, c-format
msgid "library failed pids statistics, at %d: %s"
msgstr ""

#: src/top/top_nls.c:595
#, fuzzy, c-format
msgid "bad memory scaling arg '%s'"
msgstr "Falsches Argument »%s« für Iterationen"

#: src/top/top_nls.c:596
#, c-format
msgid "PID to collapse/expand [default pid = %d]"
msgstr ""

#: src/top/top_nls.c:597
msgid "wrong mode, command inactive"
msgstr "Falscher Modus, Befehl inaktiv"

#: src/top/top_nls.c:598
msgid "saving prevents older top from reading, save anyway?"
msgstr "Speichern hindert ältere Top-Versionen am Lesen, trotzdem fortsetzen?"

#: src/top/top_nls.c:599
#, fuzzy, c-format
msgid "failed sem_init() at %d: %s"
msgstr "Setzen des TTY fehlgeschlagen: %s"

#: src/top/top_nls.c:600
#, fuzzy, c-format
msgid "failed pthread_create() at %d: %s"
msgstr "/proc/stat konnte nicht gelesen werden: %s"

#: src/top/top_nls.c:601
msgid "sorry, restricted namespace with reduced functionality"
msgstr ""

#: src/top/top_nls.c:602
#, c-format
msgid "set pid %d AGNI value to"
msgstr ""

#: src/top/top_nls.c:603
msgid "valid AGNI range is -20 to +19"
msgstr ""

#: src/top/top_nls.c:604
#, fuzzy, c-format
msgid "autogroup open failed, %s"
msgstr "Datei »%s« konnte nicht geöffnet werden"

#: src/top/top_nls.c:605
#, fuzzy, c-format
msgid "autogroup write failed, %s"
msgstr "Nice-Wert"

#: src/top/top_nls.c:606
#, c-format
msgid "command line for pid %d, %s"
msgstr ""

#: src/top/top_nls.c:607
#, c-format
msgid "control groups for pid %d, %s"
msgstr ""

#: src/top/top_nls.c:608
#, fuzzy, c-format
msgid "environment for pid %d, %s"
msgstr "Umgebungsvariablen"

#: src/top/top_nls.c:609
#, c-format
msgid "namespaces for pid %d, %s"
msgstr ""

#: src/top/top_nls.c:610
msgid "n/a"
msgstr ""

#: src/top/top_nls.c:611
#, c-format
msgid "supplementary groups for pid %d, %s"
msgstr ""

#: src/top/top_nls.c:612
msgid "message log, last 10 messages:"
msgstr ""

#. Translation Notes ------------------------------------------------
#. .  It is strongly recommend that the --no-wrap command line option
#. .  be used with all supporting translation tools, when available.
#. .
#. .  The next several text groups contain special escape sequences
#. .  representing values used to index a table at run-time.
#. .
#. .  Each such sequence consists of a tilde (~) followed by an ascii
#. .  number in the range of '1' - '8'.  Examples are '~2', '~8', etc.
#. .  These escape sequences must never themselves be translated but
#. .  could be deleted.
#. .
#. .  If you remove these escape sequences (both tilde and number) it
#. .  would make translation easier.  However, the ability to display
#. .  colors and bold text at run-time will have been lost.
#. .
#. .  Additionally, each of these text groups was designed to display
#. .  in a 80x24 terminal window.  Hopefully, any translations will
#. .  adhere to that goal lest the translated text be truncated.
#. .
#. .  If you would like additional information regarding these strings,
#. .  please see the prologue to the show_special function in the top.c
#. .  source file.
#. .
#. .  Caution:
#. .    The next three items represent pages for interacting with a user.
#. .    In all cases, the last lines of text must be treated with care.
#. .
#. .    They must not end with a newline character so that at runtime the
#. .    cursor will remain on that final text line.
#. .
#. .    Also, the special sequences (tilde+number) must not appear on the
#. .    last line (the one without the newline). So please avoid any line
#. .    wraps that could place them there.
#. .
#: src/top/top_nls.c:657
#, c-format
msgid ""
"Help for Interactive Commands~2 - %s\n"
"Window ~1%s~6: ~1Cumulative mode ~3%s~2.  ~1System~6: ~1Delay ~3%.1f secs~2; "
"~1Secure mode ~3%s~2.\n"
"\n"
"  Z~5,~1B~5,E,e   Global: '~1Z~2' colors; '~1B~2' bold; '~1E~2'/'~1e~2' "
"summary/task memory scale\n"
"  l,t,m,I   Toggle: '~1l~2' load avg; '~1t~2' task/cpu; '~1m~2' memory; "
"'~1I~2' Irix mode\n"
"  0,1,2,3,4 Toggle: '~10~2' zeros; '~11~2/~12~2/~13~2' cpu/numa views; "
"'~14~2' cpus two abreast\n"
"  f,X       Fields: '~1f~2' add/remove/order/sort; '~1X~2' increase fixed-"
"width fields\n"
"\n"
"  L,&,<,> . Locate: '~1L~2'/'~1&~2' find/again; Move sort column: "
"'~1<~2'/'~1>~2' left/right\n"
"  R,H,J,C . Toggle: '~1R~2' Sort; '~1H~2' Threads; '~1J~2' Num justify; "
"'~1C~2' Coordinates\n"
"  c,i,S,j . Toggle: '~1c~2' Cmd name/line; '~1i~2' Idle; '~1S~2' Time; "
"'~1j~2' Str justify\n"
"  x~5,~1y~5     . Toggle highlights: '~1x~2' sort field; '~1y~2' running "
"tasks\n"
"  z~5,~1b~5     . Toggle: '~1z~2' color/mono; '~1b~2' bold/reverse (only if "
"'x' or 'y')\n"
"  u,U,o,O . Filter by: '~1u~2'/'~1U~2' effective/any user; '~1o~2'/'~1O~2' "
"other criteria\n"
"  n,#,^O  . Set: '~1n~2'/'~1#~2' max tasks displayed; Show: ~1Ctrl~2+'~1O~2' "
"other filter(s)\n"
"  V,v,F   . Toggle: '~1V~2' forest view; '~1v~2' hide/show children; '~1F~2' "
"keep focused\n"
"\n"
"%s  ^G,K,N,U  View: ctl groups ~1^G~2; cmdline ~1^K~2; environment ~1^N~2; "
"supp groups ~1^U~2\n"
"  W,Y,!,^E  Write cfg '~1W~2'; Inspect '~1Y~2'; Combine Cpus '~1!~2'; Scale "
"time ~1^E~2'\n"
"  q         Quit\n"
"          ( commands shown with '.' require a ~1visible~2 task display "
"~1window~2 ) \n"
"Press '~1h~2' or '~1?~2' for help with ~1Windows~2,\n"
"Type 'q' or <Esc> to continue "
msgstr ""

#: src/top/top_nls.c:683
#, c-format
msgid ""
"Help for Windows / Field Groups~2 - \"Current Window\" = ~1 %s ~6\n"
"\n"
". Use multiple ~1windows~2, each with separate config opts (color,fields,"
"sort,etc)\n"
". The 'current' window controls the ~1Summary Area~2 and responds to your "
"~1Commands~2\n"
"  . that window's ~1task display~2 can be turned ~1Off~2 & ~1On~2, growing/"
"shrinking others\n"
"  . with ~1NO~2 task display, some commands will be ~1disabled~2 "
"('i','R','n','c', etc)\n"
"    until a ~1different window~2 has been activated, making it the 'current' "
"window\n"
". You ~1change~2 the 'current' window by: ~1 1~2) cycling forward/backward;"
"~1 2~2) choosing\n"
"  a specific field group; or~1 3~2) exiting the color mapping or fields "
"screens\n"
". Commands ~1available anytime   -------------~2\n"
"    A       . Alternate display mode toggle, show ~1Single~2 / ~1Multiple~2 "
"windows\n"
"    g       . Choose another field group and make it 'current', or change "
"now\n"
"              by selecting a number from: ~1 1~2 =%s;~1 2~2 =%s;~1 3~2 =%s; "
"or~1 4~2 =%s\n"
". Commands ~1requiring~2 '~1A~2' mode~1  -------------~2\n"
"    G       . Change the ~1Name~5 of the 'current' window/field group\n"
" ~1*~4  a , w   . Cycle through all four windows:  '~1a~5' Forward; '~1w~5' "
"Backward\n"
" ~1*~4  - , _   . Show/Hide:  '~1-~5' ~1Current~2 window; '~1_~5' all "
"~1Visible~2/~1Invisible~2\n"
"  The screen will be divided evenly between task displays.  But you can "
"make\n"
"  some ~1larger~2 or ~1smaller~2, using '~1n~2' and '~1i~2' commands.  Then "
"later you could:\n"
" ~1*~4  = , +   . Rebalance tasks:  '~1=~5' ~1Current~2 window; '~1+~5' "
"~1Every~2 window\n"
"              (this also forces the ~1current~2 or ~1every~2 window to "
"become visible)\n"
"\n"
"In '~1A~2' mode, '~1*~4' keys are your ~1essential~2 commands.  Please try "
"the '~1a~2' and '~1w~2'\n"
"commands plus the 'g' sub-commands NOW.  Press <Enter> to make 'Current' "
msgstr ""

#. Translation Notes ------------------------------------------------
#. .  The following 'Help for color mapping' simulated screen should
#. .  probably NOT be translated.  It is terribly hard to follow in
#. .  this form and any translation could produce unpleasing results
#. .  that are unlikely to parallel the running top program.
#. .
#. .  If you decide to proceed with translation, please take care
#. .  to not disturb the spaces and the tilde + number delimiters.
#. .
#: src/top/top_nls.c:718
#, c-format
msgid ""
"Help for color mapping~2 - \"Current Window\" = ~1 %s ~6\n"
"\n"
"   color - 04:25:44 up 8 days, 50 min,  7 users,  load average:\n"
"   Tasks:~3  64 ~2total,~3   2 ~3running,~3  62 ~2sleeping,~3   0 ~2stopped,"
"~3\n"
"   %%Cpu(s):~3  76.5 ~2user,~3  11.2 ~2system,~3   0.0 ~2nice,~3  12.3 "
"~2idle~3\n"
"   ~1 Nasty Message! ~4  -or-  ~1Input Prompt~5\n"
"   ~1  PID TTY     PR  NI %%CPU    TIME+   VIRT SWAP S COMMAND    ~6\n"
"   17284 ~8pts/2  ~7  8   0  0.0   0:00.75  1380    0 S /bin/bash   ~8\n"
"   ~1 8601 pts/1    7 -10  0.4   0:00.03   916    0 R color -b -z~7\n"
"   11005 ~8?      ~7  9   0  0.0   0:02.50  2852 1008 S amor -sessi~8\n"
"   available toggles: ~1B~2 =disable bold globally (~1%s~2),\n"
"       ~1z~2 =color/mono (~1%s~2), ~1b~2 =tasks \"bold\"/reverse (~1%s~2)\n"
"\n"
"1) Select a ~1target~2 as an upper case letter, ~1current target~2 is ~1 %c "
"~4:\n"
"   S~2 = Summary Data,~1  M~2 = Messages/Prompts,\n"
"   H~2 = Column Heads,~1  T~2 = Task Information\n"
"2) Select a ~1color~2 as a number or use the up/down arrow keys\n"
"   to raise/lower the %d colors value, ~1current color~2 is ~1 %d ~4:\n"
"   0~2 = black,~1  1~2 = red,    ~1  2~2 = green,~1  3~2 = yellow,\n"
"   4~2 = blue, ~1  5~2 = magenta,~1  6~2 = cyan, ~1  7~2 = white\n"
"\n"
"3) Then use these keys when finished:\n"
"   'q' or <Esc> to abort changes to window '~1%s~2'\n"
"   'a' or 'w' to commit & change another, <Enter> to commit and end "
msgstr ""

#. Translation Hint: As is true for the text above, the "keys" shown to the left and
#. .                 also imbedded in the translatable text (along with escape seqs)
#. .                 should never themselves be translated.
#: src/top/top_nls.c:747
msgid ""
"  d,k,r,^R '~1d~2' set delay; '~1k~2' kill; '~1r~2' renice; ~1Ctrl~2+'~1R~2' "
"renice autogroup\n"
msgstr ""

#. Translation Hint:
#. .  This Fields Management header should be 3 lines long so as
#. .  to allow 1 blank line before the fields & descriptions.
#. .  If absoultely necessary, 4 lines could be used (but never more).
#. .
#: src/top/top_nls.c:755
#, c-format
msgid ""
"Fields Management~2 for window ~1%s~6, whose current sort field is ~1%s~2\n"
"   Navigate with Up/Dn, Right selects for move then <Enter> or Left "
"commits,\n"
"   'd' or <Space> toggles display, 's' sets sort.  Use 'q' or <Esc> to end!\n"
msgstr ""

#. Translation Hint:
#. .  The next 5 items must each be translated as a single line.
#. .
#: src/top/top_nls.c:763
#, c-format
msgid ""
"%s:~3 %3u ~2total,~3 %3u ~2running,~3 %3u ~2sleeping,~3 %3u ~2stopped,~3 %3u "
"~2zombie~3\n"
msgstr ""

#. Translation Hint: Only the following abbreviations need be translated
#. .                 us = user, sy = system, ni = nice, id = idle, wa = wait,
#. .                 hi hardware interrupt, si = software interrupt
#: src/top/top_nls.c:769
#, c-format
msgid ""
"%s~3 %#5.1f ~2us,~3 %#5.1f ~2sy,~3 %#5.1f ~2ni,~3 %#5.1f ~2id,~3 %#5.1f ~2wa,"
"~3 %#5.1f ~2hi,~3 %#5.1f ~2si~3 ~1"
msgstr ""

#. Translation Hint: Only the following abbreviations need be translated
#. .                 us = user, sy = system, ni = nice, id = idle, wa = wait,
#. .                 hi hardware interrupt, si = software interrupt, st = steal time
#: src/top/top_nls.c:775
#, c-format
msgid ""
"%s~3%#5.1f ~2us,~3%#5.1f ~2sy,~3%#5.1f ~2ni,~3%#5.1f ~2id,~3%#5.1f ~2wa,"
"~3%#5.1f ~2hi,~3%#5.1f ~2si,~3%#5.1f ~2st~3 ~1"
msgstr ""

#. Translation Hint: next 2 must be treated together, with WORDS above & below aligned
#: src/top/top_nls.c:779
#, c-format
msgid ""
"%s %s:~3 %9.9s~2total,~3 %9.9s~2free,~3 %9.9s~2used,~3 %9.9s~2buff/cache~3 "
"~1    "
msgstr ""

#: src/top/top_nls.c:781
#, c-format
msgid ""
"%s %s:~3 %9.9s~2total,~3 %9.9s~2free,~3 %9.9s~2used.~3 %9.9s~2avail %s~3"
msgstr ""

#. Translation Hint:
#. .  The next 2 headers for 'Inspection' must each be 3 lines or less
#. .
#: src/top/top_nls.c:787
#, c-format
msgid ""
"Inspection~2 Pause at: pid ~1%d~6, running ~1%s~6\n"
"Use~2:  left/right then <Enter> to ~1select~5 an option; 'q' or <Esc> to "
"~1end~5 !\n"
"Options~2: ~1%s\n"
msgstr ""

#: src/top/top_nls.c:792
#, c-format
msgid ""
"Inspection~2 View at pid: ~1%s~3, running ~1%s~3.  Locating: ~1%s~6\n"
"Use~2:  left/right/up/down/etc to ~1navigate~5 the output; 'L'/'&' to "
"~1locate~5/~1next~5.\n"
"Or~2:   <Enter> to ~1select another~5; 'q' or <Esc> to ~1end~5 !\n"
msgstr ""

#: src/uptime.c:47 src/uptime.c:119
msgid "Cannot get system uptime"
msgstr ""

#: src/uptime.c:63
msgid " -p, --pretty   show uptime in pretty format\n"
msgstr " -p, --pretty   Betriebszeit in ansehnlichem Format anzeigen\n"

#: src/uptime.c:65
msgid " -s, --since    system up since\n"
msgstr " -s, --since    System in Betrieb seit\n"

#: src/vmstat.c:224
#, c-format
msgid " %s [options] [delay [count]]\n"
msgstr " %s [Optionen] [Verzögerung [Anzahl]]\n"

#: src/vmstat.c:227
msgid " -a, --active           active/inactive memory\n"
msgstr " -a, --active           aktiver/inaktiver Speicher\n"

#: src/vmstat.c:228
msgid " -f, --forks            number of forks since boot\n"
msgstr " -f, --forks            Anzahl der Forks seit dem Systemstart\n"

#: src/vmstat.c:229
msgid " -m, --slabs            slabinfo\n"
msgstr " -m, --slabs            Slab-Info\n"

#: src/vmstat.c:230
msgid " -n, --one-header       do not redisplay header\n"
msgstr " -n, --one-header       Header nicht erneut anzeigen\n"

#: src/vmstat.c:231
msgid " -s, --stats            event counter statistics\n"
msgstr " -s, --stats            Ereigniszähler-Statistiken\n"

#: src/vmstat.c:232
msgid " -d, --disk             disk statistics\n"
msgstr " -d, --disk             Laufwerksstatistiken\n"

#: src/vmstat.c:233
msgid " -D, --disk-sum         summarize disk statistics\n"
msgstr " -D, --disk-sum         Laufwerksstatistiken zusammenfassen\n"

#: src/vmstat.c:234
msgid " -p, --partition <dev>  partition specific statistics\n"
msgstr " -p, --partition <dev>  partitionsspezifische Statistiken\n"

#: src/vmstat.c:235
msgid " -S, --unit <char>      define display unit\n"
msgstr " -S, --unit <Zeichen>   Anzeigeeinheit festlegen\n"

#: src/vmstat.c:236
msgid " -w, --wide             wide output\n"
msgstr " -w, --wide             breite Ausgabe\n"

#: src/vmstat.c:237
msgid " -t, --timestamp        show timestamp\n"
msgstr " -t, --timestamp        Zeitstempel anzeigen\n"

#: src/vmstat.c:238
#, fuzzy
msgid " -y, --no-first         skips first line of output\n"
msgstr " -w, --wide             breite Ausgabe\n"

#: src/vmstat.c:257
msgid ""
"procs -----------memory---------- ---swap-- -----io---- -system-- ------"
"cpu-----"
msgstr ""

#: src/vmstat.c:259
#, fuzzy
msgid ""
"--procs-- -----------------------memory---------------------- ---swap-- -----"
"io---- -system-- ----------cpu----------"
msgstr ""
"Disk- ----------------Lesevorgänge--------------- ---------------"
"Schreibvorgänge------------- ------E/A------"

#: src/vmstat.c:260 src/vmstat.c:616
msgid " -----timestamp-----"
msgstr " ----Zeitstempel----"

#. Translation Hint: max 2 chars
#: src/vmstat.c:279
msgid "r"
msgstr "r"

#. Translation Hint: max 2 chars
#: src/vmstat.c:281
msgid "b"
msgstr "b"

#. Translation Hint: max 6 chars
#: src/vmstat.c:283
msgid "swpd"
msgstr "swpd"

#. Translation Hint: max 6 chars
#: src/vmstat.c:285
msgid "free"
msgstr "frei"

#. Translation Hint: max 6 chars
#: src/vmstat.c:287
msgid "inact"
msgstr "inakt"

#. Translation Hint: max 6 chars
#: src/vmstat.c:289
msgid "buff"
msgstr "buff"

#. Translation Hint: max 6 chars
#: src/vmstat.c:291
msgid "active"
msgstr "aktiv"

#. Translation Hint: max 6 chars
#: src/vmstat.c:293
msgid "cache"
msgstr "Cache"

#. Translation Hint: max 4 chars
#: src/vmstat.c:295
msgid "si"
msgstr "si"

#. Translation Hint: max 4 chars
#: src/vmstat.c:297
msgid "so"
msgstr "so"

#. Translation Hint: max 5 chars
#: src/vmstat.c:299
msgid "bi"
msgstr "bi"

#. Translation Hint: max 5 chars
#: src/vmstat.c:301
msgid "bo"
msgstr "bo"

#. Translation Hint: max 4 chars
#: src/vmstat.c:303
msgid "in"
msgstr "in"

#. Translation Hint: max 4 chars
#: src/vmstat.c:305
msgid "cs"
msgstr "cs"

#. Translation Hint: max 2 chars
#: src/vmstat.c:307
msgid "us"
msgstr "us"

#. Translation Hint: max 2 chars
#: src/vmstat.c:309
msgid "sy"
msgstr "sy"

#. Translation Hint: max 2 chars
#: src/vmstat.c:311
msgid "id"
msgstr "id"

#. Translation Hint: max 2 chars
#: src/vmstat.c:313
msgid "wa"
msgstr "wa"

#. Translation Hint: max 2 chars
#: src/vmstat.c:315
msgid "st"
msgstr "st"

#. Translation Hint: max 2 chars
#: src/vmstat.c:317
msgid "gu"
msgstr ""

#: src/vmstat.c:378 src/vmstat.c:867
#, fuzzy
msgid "Unable to create vmstat structure"
msgstr "IPC-Pipes konnten nicht angelegt werden"

#: src/vmstat.c:380 src/vmstat.c:863 src/vmstat.c:916
msgid "Unable to create system stat structure"
msgstr ""

#: src/vmstat.c:391 src/vmstat.c:871
msgid "Unable to select memory information"
msgstr ""

#: src/vmstat.c:405 src/vmstat.c:458 src/vmstat.c:865
msgid "Unable to select stat information"
msgstr ""

#. Translation Hint: Translating folloging disk partition
#. * header fields that follow (marked with max x chars) might
#. * not work, unless manual page is translated as well.
#. Translation Hint: max 10 chars
#: src/vmstat.c:562
msgid "reads"
msgstr "gelesen"

#. Translation Hint: max 16 chars
#: src/vmstat.c:564
msgid "read sectors"
msgstr ""
"gelesene\n"
"Sektoren"

#. Translation Hint: max 10 chars
#: src/vmstat.c:566
msgid "writes"
msgstr "geschrieben"

#. Translation Hint: max 16 chars
#: src/vmstat.c:568
msgid "requested writes"
msgstr ""
"angeforderte\n"
"Schreibvorgänge"

#: src/vmstat.c:581 src/vmstat.c:684 src/vmstat.c:810
msgid "Unable to create diskstat structure"
msgstr ""

#: src/vmstat.c:584 src/vmstat.c:590
#, fuzzy, c-format
msgid "Disk/Partition %s not found"
msgstr "Partition wurde nicht gefunden\n"

#: src/vmstat.c:613
msgid ""
"disk- ------------reads------------ ------------writes----------- -----"
"IO------"
msgstr ""
"Disk- ---------Lesevorgänge-------- --------Schreibvorgänge------ ------E/"
"A----"

#: src/vmstat.c:615
msgid ""
"disk- -------------------reads------------------- -------------------"
"writes------------------ ------IO-------"
msgstr ""
"Disk- ----------------Lesevorgänge--------------- ---------------"
"Schreibvorgänge------------- ------E/A------"

#. Translation Hint: max 6 chars
#: src/vmstat.c:634 src/vmstat.c:642
msgid "total"
msgstr "gesamt"

#. Translation Hint: max 6 chars
#: src/vmstat.c:636 src/vmstat.c:644
msgid "merged"
msgstr ""

#. Translation Hint: max 7 chars
#: src/vmstat.c:638 src/vmstat.c:646
msgid "sectors"
msgstr "Sektoren"

#. Translation Hint: max 7 chars
#: src/vmstat.c:640 src/vmstat.c:648
msgid "ms"
msgstr "ms"

#. Translation Hint: max 6 chars
#: src/vmstat.c:650
msgid "cur"
msgstr "cur"

#. Translation Hint: max 6 chars
#: src/vmstat.c:652
msgid "sec"
msgstr "s"

#: src/vmstat.c:691 src/vmstat.c:812
msgid "Unable to retrieve disk statistics"
msgstr ""

#. Translation Hint: Translating folloging slab fields that
#. * follow (marked with max x chars) might not work, unless
#. * manual page is translated as well.
#. Translation Hint: max 24 chars
#: src/vmstat.c:738
msgid "Cache"
msgstr "Cache"

#. Translation Hint: max 6 chars
#: src/vmstat.c:740
msgid "Num"
msgstr "Num"

#. Translation Hint: max 6 chars
#: src/vmstat.c:742
msgid "Total"
msgstr "Gesamt"

#. Translation Hint: max 6 chars
#: src/vmstat.c:744
msgid "Size"
msgstr "Größe"

#. Translation Hint: max 6 chars
#: src/vmstat.c:746
msgid "Pages"
msgstr "Seiten"

#: src/vmstat.c:833
#, fuzzy, c-format
msgid "%13d disks\n"
msgstr "%13d Laufwerke \n"

#: src/vmstat.c:834
#, fuzzy, c-format
msgid "%13d partitions\n"
msgstr "%13d Partitionen \n"

#: src/vmstat.c:835
#, c-format
msgid "%13lu total reads\n"
msgstr "%13lu Lesevorgänge gesamt\n"

#: src/vmstat.c:836
#, c-format
msgid "%13lu merged reads\n"
msgstr ""

#: src/vmstat.c:837
#, c-format
msgid "%13lu read sectors\n"
msgstr "%13lu gelesene Sektoren\n"

#: src/vmstat.c:838
#, c-format
msgid "%13lu milli reading\n"
msgstr ""

#: src/vmstat.c:839
#, c-format
msgid "%13lu writes\n"
msgstr "%13lu Schreibvorgänge\n"

#: src/vmstat.c:840
#, c-format
msgid "%13lu merged writes\n"
msgstr ""

#: src/vmstat.c:841
#, c-format
msgid "%13lu written sectors\n"
msgstr "%13lu geschriebene Sektoren\n"

#: src/vmstat.c:842
#, c-format
msgid "%13lu milli writing\n"
msgstr ""

#: src/vmstat.c:843
#, c-format
msgid "%13lu inprogress IO\n"
msgstr ""

#: src/vmstat.c:844
#, c-format
msgid "%13lu milli spent IO\n"
msgstr ""

#: src/vmstat.c:845
#, c-format
msgid "%13lu milli weighted IO\n"
msgstr ""

#: src/vmstat.c:873
#, c-format
msgid "%13lu %s total memory\n"
msgstr "%13lu %s Gesamtspeicher\n"

#: src/vmstat.c:874
#, c-format
msgid "%13lu %s used memory\n"
msgstr "%13lu %s benutzter Speicher\n"

#: src/vmstat.c:875
#, c-format
msgid "%13lu %s active memory\n"
msgstr "%13lu %s aktiver Speicher\n"

#: src/vmstat.c:876
#, c-format
msgid "%13lu %s inactive memory\n"
msgstr "%13lu %s inaktiver Speicher\n"

#: src/vmstat.c:877
#, c-format
msgid "%13lu %s free memory\n"
msgstr "%13lu %s freier Speicher\n"

#: src/vmstat.c:878
#, c-format
msgid "%13lu %s buffer memory\n"
msgstr "%13lu %s Pufferspeicher\n"

#: src/vmstat.c:879
#, c-format
msgid "%13lu %s swap cache\n"
msgstr "%13lu %s Auslagerungsspeicher-Cache\n"

#: src/vmstat.c:880
#, c-format
msgid "%13lu %s total swap\n"
msgstr "%13lu %s Gesamt-Auslagerungsspeicher\n"

#: src/vmstat.c:881
#, c-format
msgid "%13lu %s used swap\n"
msgstr "%13lu %s benutzter Auslagerungsspeicher\n"

#: src/vmstat.c:882
#, c-format
msgid "%13lu %s free swap\n"
msgstr "%13lu %s freier Auslagerungsspeicher\n"

#: src/vmstat.c:883
#, c-format
msgid "%13lld non-nice user cpu ticks\n"
msgstr ""

#: src/vmstat.c:884
#, c-format
msgid "%13lld nice user cpu ticks\n"
msgstr ""

#: src/vmstat.c:885
#, c-format
msgid "%13lld system cpu ticks\n"
msgstr "%13lld System-CPU-Ticks\n"

#: src/vmstat.c:886
#, c-format
msgid "%13lld idle cpu ticks\n"
msgstr "%13lld Untätig-CPU-Ticks\n"

#: src/vmstat.c:887
#, c-format
msgid "%13lld IO-wait cpu ticks\n"
msgstr "%13lld E/A-Warten-CPU-Ticks\n"

#: src/vmstat.c:888
#, c-format
msgid "%13lld IRQ cpu ticks\n"
msgstr "%13lld IRQ-CPU-Ticks\n"

#: src/vmstat.c:889
#, c-format
msgid "%13lld softirq cpu ticks\n"
msgstr ""

#: src/vmstat.c:890
#, c-format
msgid "%13lld stolen cpu ticks\n"
msgstr ""

#: src/vmstat.c:891
#, fuzzy, c-format
msgid "%13lld non-nice guest cpu ticks\n"
msgstr "%13lld Untätig-CPU-Ticks\n"

#: src/vmstat.c:892
#, fuzzy, c-format
msgid "%13lld nice guest cpu ticks\n"
msgstr "%13lld Untätig-CPU-Ticks\n"

#: src/vmstat.c:893
#, fuzzy, c-format
msgid "%13lu K paged in\n"
msgstr "%13lu %s benutzter Auslagerungsspeicher\n"

#: src/vmstat.c:894
#, fuzzy, c-format
msgid "%13lu K paged out\n"
msgstr "%13lu %s benutzter Speicher\n"

#: src/vmstat.c:895
#, c-format
msgid "%13lu pages swapped in\n"
msgstr ""

#: src/vmstat.c:896
#, c-format
msgid "%13lu pages swapped out\n"
msgstr ""

#: src/vmstat.c:897
#, fuzzy, c-format
msgid "%13lu interrupts\n"
msgstr "%13u Interrupts\n"

#: src/vmstat.c:898
#, fuzzy, c-format
msgid "%13lu CPU context switches\n"
msgstr "%13lu Schreibvorgänge\n"

#: src/vmstat.c:899
#, fuzzy, c-format
msgid "%13lu boot time\n"
msgstr "%13lu Lesevorgänge gesamt\n"

#: src/vmstat.c:900 src/vmstat.c:918
#, fuzzy, c-format
msgid "%13lu forks\n"
msgstr "%13u Forks\n"

#. Translation Hint: do not change argument characters
#: src/vmstat.c:1021
msgid "-S requires k, K, m or M (default is KiB)"
msgstr "-S benötigt k, K, m oder M (Vorgabe ist KiB)"

#: src/watch.c:92
#, c-format
msgid " %s [options] command\n"
msgstr " %s [Optionen] Befehl\n"

#: src/watch.c:94
msgid "  -b, --beep             beep if command has a non-zero exit\n"
msgstr ""
"  -b, --beep             Warnklang abspielen, wenn die Ausgabe des\n"
"                         Befehls nicht Null ist\n"

#: src/watch.c:95
msgid "  -c, --color            interpret ANSI color and style sequences\n"
msgstr "  -c, --color            ANSI-Farb- und Stilsequenzen interpretieren\n"

#: src/watch.c:96
msgid ""
"  -d, --differences[=<permanent>]\n"
"                         highlight changes between updates\n"
msgstr ""
"  -d, --differences[=<permanent>]\n"
"                         Änderungen zwischen Aktualisierungen\n"
"                         hervorheben\n"

#: src/watch.c:98
msgid "  -e, --errexit          exit if command has a non-zero exit\n"
msgstr ""
"  -e, --errexit          abbrechen, wenn die Ausgabe des Befehls\n"
"                         nicht Null ist\n"

#: src/watch.c:99
msgid "  -g, --chgexit          exit when output from command changes\n"
msgstr ""
"  -g, --chgexit          beenden, wenn sich die Ausgabe des Befehls\n"
"                         ändert\n"

#: src/watch.c:100
#, fuzzy
msgid ""
"  -q, --equexit <cycles>\n"
"                         exit when output from command does not change\n"
msgstr ""
"  -g, --chgexit          beenden, wenn sich die Ausgabe des Befehls\n"
"                         ändert\n"

#: src/watch.c:102
msgid "  -n, --interval <secs>  seconds to wait between updates\n"
msgstr ""
"  -n, --interval <Sek>   Wartezeit zwischen Aktualisierungen\n"
"                         in Sekunden\n"

#: src/watch.c:103
msgid "  -p, --precise          attempt run command in precise intervals\n"
msgstr ""
"  -p, --precise          versuchen, den Befehl in präzisen\n"
"                         Intervallen auszuführen\n"

#: src/watch.c:104
msgid "  -t, --no-title         turn off header\n"
msgstr "  -t, --no-title         Kopfzeile nicht anzeigen\n"

#: src/watch.c:105
msgid "  -w, --no-wrap          turn off line wrapping\n"
msgstr "  -w, --no-wrap          Zeilenumbrüche deaktivieren\n"

#: src/watch.c:106
msgid "  -x, --exec             pass command to exec instead of \"sh -c\"\n"
msgstr ""
"  -x, --exec             auszuführenden Befehl übergeben anstelle\n"
"                         von »sh -c«\n"

#: src/watch.c:109
msgid " -v, --version  output version information and exit\n"
msgstr " -v, --version  Versionsinformation anzeigen und beenden\n"

#: src/watch.c:483
#, c-format
msgid "Every %.1fs: "
msgstr "Alle %.1fs: "

#: src/watch.c:484
#, c-format
msgid "%s: %s"
msgstr "%s: %s"

#: src/watch.c:573
msgid "unable to create IPC pipes"
msgstr "IPC-Pipes konnten nicht angelegt werden"

#: src/watch.c:583
msgid "unable to fork process"
msgstr "Prozess kann nicht geforkt werden"

#: src/watch.c:588
msgid "dup2 failed"
msgstr "dup2 fehlgeschlagen"

#: src/watch.c:595
#, c-format
msgid "unable to execute '%s'"
msgstr "»%s« kann nicht ausgeführt werden"

#: src/watch.c:612
msgid "fdopen"
msgstr "fdopen"

#: src/watch.c:777
msgid "waitpid"
msgstr "waitpid"

#: src/watch.c:785
msgid "command exit with a non-zero status, press a key to exit"
msgstr ""
"der Befehl wurde mit einem von Null verschiedenen Exit-Status beendet, "
"drücken Sie eine Taste zum Beenden"

#: src/watch.c:845
msgid "Could not parse interval from WATCH_INTERVAL"
msgstr "Intervall konnte nicht aus WATCH_INTERVAL ermittelt werden"

#: src/watch.c:930
#, c-format
msgid "unicode handling error\n"
msgstr "Unicode-Verarbeitungsfehler\n"

#: src/watch.c:936
#, c-format
msgid "unicode handling error (malloc)\n"
msgstr "Unicode-Verarbeitungsfehler (malloc)\n"

#: src/w.c:254 src/w.c:269
#, c-format
msgid " %2ludays"
msgstr " %2lu Tage"

#. Translation Hint: Minutes:Seconds
#. Translation Hint: Hours:Minutes
#: src/w.c:263 src/w.c:273
#, c-format
msgid " %2lu:%02um"
msgstr " %2lu:%02u m"

#. Translation Hint: Seconds:Centiseconds
#: src/w.c:281
#, c-format
msgid " %2lu.%02us"
msgstr " %2lu.%02u s"

#: src/w.c:524
#, fuzzy, c-format
msgid " %s [options] [user]\n"
msgstr " %s [Optionen] [tty]\n"

#: src/w.c:526
msgid " -h, --no-header     do not print header\n"
msgstr " -h, --no-header     keinen Header ausgeben\n"

#: src/w.c:527
msgid " -u, --no-current    ignore current process username\n"
msgstr " -u, --no-current    Benutzername des aktuellen Prozesses ignorieren\n"

#: src/w.c:528
msgid " -s, --short         short format\n"
msgstr " -s, --short         Kurzformat\n"

#: src/w.c:529
msgid " -f, --from          show remote hostname field\n"
msgstr " -f, --from          Feld für entfernten Rechnernamen anzeigen\n"

#: src/w.c:530
msgid " -o, --old-style     old style output\n"
msgstr " -o, --old-style     Ausgabe im alten Stil\n"

#: src/w.c:531
msgid ""
" -i, --ip-addr       display IP address instead of hostname (if possible)\n"
msgstr ""
" -i, --ip-addr       IP-Adresse anstelle des Rechnernamens anzeigen\n"
"                     (falls möglich)\n"

#: src/w.c:625
#, c-format
msgid ""
"User length environment PROCPS_USERLEN must be between 8 and %i, ignoring.\n"
msgstr ""
"Benutzer-Umgebungsvariable PROCPS_USERLEN muss zwischen 8 und %i sein, wird "
"ignoriert.\n"

#: src/w.c:635
#, c-format
msgid ""
"from length environment PROCPS_FROMLEN must be between 8 and %d, ignoring\n"
msgstr ""
"»Von«-Umgebungsvariable PROCPS_FROMLEN muss zwischen 8 und %i sein, wird "
"ignoriert\n"

#. Translation Hint: Following five uppercase messages are
#. * headers. Try to keep alignment intact.
#: src/w.c:661
#, c-format
msgid "%-*s TTY      "
msgstr "%-*s TTY      "

#: src/w.c:663
msgid "FROM"
msgstr "VON"

#: src/w.c:665
#, c-format
msgid "  LOGIN@   IDLE   JCPU   PCPU WHAT\n"
msgstr ""

#: src/w.c:667
#, c-format
msgid "   IDLE WHAT\n"
msgstr ""

#: local/c.h:153
msgid ""
"\n"
"Usage:\n"
msgstr ""
"\n"
"Aufruf:\n"

#: local/c.h:154
msgid ""
"\n"
"Options:\n"
msgstr ""
"\n"
"Optionen:\n"

#: local/c.h:155
msgid "\n"
msgstr "\n"

#: local/c.h:156
msgid " -h, --help     display this help and exit\n"
msgstr " -h, --help     diese Hilfe anzeigen und beenden\n"

#: local/c.h:157
msgid " -V, --version  output version information and exit\n"
msgstr " -V, --version  Versionsinformationen ausgeben und beenden\n"

#: local/c.h:158
#, c-format
msgid ""
"\n"
"For more details see %s.\n"
msgstr ""
"\n"
"Für weitere Einzelheiten siehe %s.\n"

#: local/c.h:160
#, c-format
msgid "%s from %s\n"
msgstr "%s von %s\n"

#~ msgid "terminal is not wide enough"
#~ msgstr "Terminal ist nicht breit genug"

#, c-format
#~ msgid "error: not enough memory\n"
#~ msgstr "Fehler: Nicht genug Speicher\n"

#, c-format
#~ msgid "error: can not access /proc\n"
#~ msgstr "Fehler: auf /proc kann nicht zugegriffen werden\n"

#, c-format
#~ msgid "unknown page size (assume 4096)\n"
#~ msgstr "unbekannte Seitengröße (4096 wird angenommen)\n"

#, c-format
#~ msgid "something at line %d\n"
#~ msgstr "etwas in Zeile %d\n"

#, c-format
#~ msgid "\"%s\" must be of the form name=value"
#~ msgstr "»%s« muss die Form Name=Wert haben"

#, c-format
#~ msgid "malformed setting \"%s\""
#~ msgstr "ungültige Einstellung »%s«"

#, c-format
#~ msgid "%s is deprecated, value not set"
#~ msgstr "%s ist veraltet, Wert wird nicht gesetzt"

#, c-format
#~ msgid ""
#~ "  %s\n"
#~ "Usage:\n"
#~ "  %s%s"
#~ msgstr ""
#~ "  %s\n"
#~ "Aufruf:\n"
#~ "  %s%s"

#, c-format
#~ msgid "failed openproc: %s"
#~ msgstr "openproc ist fehlgeschlagen: %s"

#, c-format
#~ msgid "-%c requires argument"
#~ msgstr "-%c benötigt ein Argument"

#, fuzzy
#~ msgid ""
#~ " -hv | -bcEHiOSs1 -d secs -n max -u|U user -p pid(s) -o field -w [cols]"
#~ msgstr ""
#~ " -hv | -bcEeHiOSs1 -d Sekunden -n Max. -u|U Benutzer -p PID(s) -o Feld -w "
#~ "[Spalten]"

#~ msgid "failed /proc/stat read"
#~ msgstr "/proc/stat konnte nicht gelesen werden"

#~ msgid "your kernel does not support diskstat. (2.5.70 or above required)"
#~ msgstr ""
#~ "Ihr Kernel unterstützt diskstat nicht (Version 2.5.70 oder neuer "
#~ "erforderlich)"

#~ msgid "your kernel does not support diskstat (2.5.70 or above required)"
#~ msgstr ""
#~ "Ihr Kernel unterstützt diskstat nicht (Version 2.5.70 oder neuer "
#~ "erforderlich)"

#~ msgid ""
#~ "your kernel does not support slabinfo or your permissions are insufficient"
#~ msgstr ""
#~ "Ihr Kernel unterstützt slabinfo nicht oder Ihre Zugriffsrechte sind "
#~ "unzureichend"

#~ msgid "Overwrite existing obsolete/corrupted rcfile?"
#~ msgstr "Veraltete/beschädigte Konfigurationsdatei löschen?"

#~ msgid "reads  "
#~ msgstr "gelesen"

#~ msgid "seconds argument `%s' failed"
#~ msgstr "Sekunden-Argument »%s« fehlgeschlagen "

#~ msgid "Adj"
#~ msgstr "Adj"

#~ msgid "%d column window is too narrow"
#~ msgstr "Fenster mit %d Spalten ist zu klein"

#~ msgid "%d column width exceeds command buffer size, truncating to %d"
#~ msgstr ""
#~ "die Breite der Spalte %d überschreitet die Puffergröße des Befehls, wird "
#~ "auf %d abgeschnitten "

#~ msgid "warning: screen width %d suboptimal"
#~ msgstr "Warnung: Bildschirmbreite %d ist nicht optimal"