These changes were already implemented for this newlib
version, but not in the the master branch top version.
[ and we also add the missing 3.3.17 ps 'exe' change ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
sysctl would try to read/write any path you gave it either on
the command line or configuration file. It would append /proc/sys
on the path but not check for any sneaky path traversal with ../
This commit means it first resolves all paths using realpath(3)
and then checks the path starts with "/proc/sys/"
At first I thought this might be a non-issue, but perhaps someone
could put a file into the sysctl configuration path and.. do
something? Anyway its a 8-line fix and makes things more correct.
References:
#179
Signed-off-by: Craig Small <csmall@dropbear.xyz>
The library added smaps_rollup fields in the referenced commit.
This commit exploits the new fields to give pss and uss options.
These options were first proposed back in 2015 by Petr Malat
and, with the library update, they are finally made it into ps.
Why use proportional or unique segment size? It is argued that
these give a better idea of the "real" memory usage of a process.
References:
commit 12543b6c76
issue #112https://www.freelists.org/post/procps/PSS-and-USS-support-for-pshttps://lwn.net/Articles/230975/
Signed-off-by: Craig Small <csmall@dropbear.xyz>
The pgrep code checks to see if the program is run as pkill or pidwait
and changes its behaviour accordingly. Some older versions of libtool
run the programs as lt-pkill and lt-pidwait which means the tests fail.
We add these two program names to the checks.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
If you run slabtop with the -d option and then -o option the
delay gets set to zero and it runs forever. slabtop now checks
for this combination and errors.
Adding a DEJAGNU test also found that none of the slabtop
checks were running so they got added to the list and only the
ones that need /proc/slabinfo (if not readable) are skipped.
References:
#160
What to call the new library?
Keep using libprocps wouldn't do, its a very different library from
the programs' point of view. It would also mean we could have some
clashes around the packages (two package names, same library name).
The ancient procps used libproc or libproc-a.b.c where a.b.c was the
package version. Kept the revision numbers down (it was always 0.0.0)
but the name of the library changed.
So if we use libproc-2 is there a clash with an ancient procps?
procps v 2.0.0 was around in 1999 so it was 22 years ago, also the
name of the library would have been libproc-2.0.0.so not libproc-2.so
so we're fine with that.
libproc-2 seems to fit, our second major re-work of the procps
library.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
While sysctl did change the order of /run and /etc to match
systemd in the referenced commit, the Debian bug report that
brought it to light was not documented.
References:
commit 24a1574f0ahttps://bugs.debian.org/950788
free, slabtop and uptime would happily take extra command line
arguments and doing nothing about them. The programs now check
optind after option processing and will give you usage screen
if there is anything extra.
References:
procps-ng/procps#181
For long lines from a process, watch would wrap them around to the
next. While this default option has it uses, sometimes you want to
just cut those long lines down.
watch has a -w flag which will truncate the lines to the number
of columns. A few simple lines to do this new trick.
I think I caught all the ANSI state correctly but there might be
a chance it bleeds to the next row.
References:
procps-ng/procps#182
The referenced commit the comm length was increased from 16 to 64
characters to handle the larger command names for things like kernel
threads.
However most user processes are limited to 15 characters which means
if you try something like ps -C myprogramisbiggerthansixteen this would
fail to match because /proc/<PID>/comm would only be myprogramisbigg
ps now checks the comm length and if it is 15 and if the given match
is 15 or more, it will only match the first 15 characters.
This is also how killall has worked for about a year.
Thanks to Jean Delvare <jdelvare@suse.de> for the note.
Copy of commit from master.
References:
commit 14005a371e
commit psmisc/psmisc@1188315cd0
commit 3e1c00d051
Signed-off-by: Craig Small <csmall@dropbear.xyz>
This patch fixes a nearly decade old bug discovered by
Frederik Deweerdt. His merge request shown below would
be an adequate solution except for iterative overhead.
This alternate patch will represent substantially less
overhead for an admittedly extremely rare possibility.
Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/114
And-thanks-to: Frederik Deweerdt <fdeweerdt@fastly.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
Reverted the translation hint as the fields are used for both
normal and wide modes, so need to fit the smaller of the two.
Added NEWS item
References:
commit 01c1b2345e
Based on the command line option, use 'sigqueue'
instead of 'kill' to pass the integer value with
the signal.
References:
procps-ng/procps!32
Signed-off-by: Craig Small <csmall@dropbear.xyz>
With the two preceding 'catch up' patches, this newlib
NEWS can now be made identical to that master version.
[ it's assumed any releases prior to 3.3.15 have all ]
[ been represented under newlib (where appropriate). ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
sig.c had this odd logic where on non-Hurd systems it would undefine
SIGLOST. Fine for Hurd or amd64 Linux systems. Bad for a sparc which
has SIGLOST defined *and* is not Hurd.
Just check its defined, its much simpler.
--------------- Original Master Branch Commit Message:
Some non-glibc systems didn't have libio.h or __BEGIN_DECLS
Changes to make it more standard.
References:
issue #88
Signed-off-by: Jim Warner <james.warner@comcast.net>
--------------- Original Master Branch Commit Message:
If pgrep is run with a non-program name match and there are
no matches, it segfaults.
The testsuite thinks zero bytes sent, and zero bytes sent
because the program crashed is the same :/
References:
commit 1aacf4af7fhttps://bugs.debian.org/894917
Signed-off-by: Jim Warner <james.warner@comcast.net>
--------------- Original Master Branch Commit Message:
Update NEWS with the version
Add library API change into NEWS
Update c:r:a for library to 7:0:1
This means the current and age are incremented, so old programs can
use new library but not vice-versa as they won't have the numa*
functions.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The previous commit had one minor bug in it because the fields need
to be alphabetical and times comes after timeout.
Added NEWS item for this feature
Added another testsuite check for new flags in case they
disappear or go strange one day.
References:
commit 8a94ed6111
The previous two patches updated free, but needed a tweak and the tests
also needed to be updated. I've hand-calculated the results using bc and
both the testsuite and bc results equal what free prints out.
References:
commit 9365be7633procps-ng/procps#45
The commit referenced below put a setvbuf() before checking what
fopen() returned. If the file could not be opened then the file
handle was NULL at setvbuf() crashed.
setvbuf() is now called after checking what fopen() returns and only
when it was successful.
References:
procps-ng/procps#76
commit 58ae084c27
Those references below offer more detail regarding the
default startup changes beginning with version 3.3.10.
It is important to remember that all such changes were
supposed to impact only new users or users who had not
saved the personal config file (via that 'W' command).
However, I introduced a bug wherein the rcfile was not
fully honored. This gave the changes a bad reputation.
That bug was corrected in release 3.3.11 but the issue
of default startup options keeps resurfacing. And it's
clear there's no consensus on what should be included.
Our --disable-modern-top configure option is of little
help since it remains an all-or-nothing approach. What
we need is an answer offering unlimited customization.
So, this commit will provide distribution packagers or
system administrators with a much more flexible way to
set their own preferred startup default configuration.
A new rcfile is being introduced: '/etc/topdefaultrc',
whose format/content is the same as a personal rcfile.
Thus once a 'proper' enterprise configuration has been
established and saved via 'W', it can be copied to the
/etc/ directory. Thereafter, startup in the absence of
a saved rcfile will use that configuration as default.
Now if a distribution packager or system administrator
wishes to expose their users to some of top's advanced
capabilities they can do so gradually. Perhaps setting
up graph mode for summary area task and memory display
while retaining the %CPU sort could be tried. Or maybe
showing colors, but better customized for a particular
terminal emulator. Such possibilities are now endless.
[ in exploiting this new capability, i hope that the ]
[ other windows (alt display mode) aren't overlooked ]
Reference(s):
. Sep, 2014 - Not fully honoring rcfile bug discussed
https://www.freelists.org/post/procps/top-saved-rcfile-bug
. Oct, 2014 - Attempt to defend new startup defaults
https://bugzilla.redhat.com/show_bug.cgi?id=1153049
. Jul, 2015 - Forest vs. %CPU views discussion
https://gitlab.com/procps-ng/procps/issues/6
. Oct, 2017 - Question the use of --disable-modern-top
https://bugzilla.redhat.com/show_bug.cgi?id=1499410
. Oct, 2017 - Forest vs. %CPU views discussion again
https://www.freelists.org/post/procps/Forest-mode-by-default-in-top-seems-a-bit-strange
. Dec, 2017 - Rehash of 3.3.10 startup defaults change
https://gitlab.com/procps-ng/procps/issues/78
Signed-off-by: Jim Warner <james.warner@comcast.net>
