In response to that suggestion referenced below, these
changes allow display of task/thread level NUMA nodes.
Currently, only the 'top' program offers any NUMA type
support and it is limited to the Summary Area display.
With this commit both the 'top' and 'ps' programs will
be able to display NUMA nodes associated with threads.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/58
Signed-off-by: Jim Warner <james.warner@comcast.net>
Reference(s):
proc/readproc.c: In function 'statm2proc'
proc/readproc.c:600:9: warning: variable 'num' set but not used [-Wunused-but-set-variable]
proc/stat.c: In function 'stat_derive_unique':
proc/stat.c:429:1: warning: no return statement in function returning non-void [-Wreturn-type]
ps/parser.c: In function 'arg_type':
ps/parser.c:1098:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
ps/parser.c:1099:34: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
lib/signals.c: In function 'strtosig':
lib/signals.c:243:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
lib/signals.c:245:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
slabtop.c: In function 'print_summary':
slabtop.c:223:29: warning: unused variable 'stats' [-Wunused-variable]
watch.c: In function 'process_ansi':
watch.c:232:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
watch.c:235:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
Signed-off-by: Jim Warner <james.warner@comcast.net>
When those standardized 'derived' TIC enumerators were
introduced, a problem with potential DELTA distortions
was also introduced when toggling cpus offline/online.
It has always been true that the 1st (summary) line in
/proc/stat will experience a decrease in total tics if
a new cpu is brought online. Such decreases are mostly
due to reductions in 'idle' and 'iowait' tics. Exactly
why such a counterintuitive phenomenon should occur is
a mystery, but this has been acknowledged in proc.txt.
A separate potential distortion arises with individual
cpus. And, here it extends to both bringing processors
online plus taking them offline too. When that happens
the order of the cpus array tracking is upset, placing
the 'new' values in some other processor's array slot.
But even if we were to occupy the same slot, the issue
regarding reductions in 'idle' & 'iowait' still apply.
In all cases, when a DELTA field was found to be minus
it was forced to zero via the 'TICsetH' macro. However
the 'derived' calculations are subject to new forms of
distortion with their own DELTA values. For example we
could find DELTA_SUM_USER + DELTA_SUM_SYSTEM exceeding
DELTA_SUM_TOTAL, an illogical/inappropriate condition.
So this commit moves former protections for individual
cpus to the stat_derive_unique() function and modifies
it to also extend protections to the 'derived' values.
In the process we now protect the cpu 'summary' counts
which were unfortunately previously overlooked (oops).
Reference(s):
. 'derived' types introduced
commit 2c86c4984a
This program has always tried to maintain an extermely
robust command line parsing procedure, far more robust
that what's available with the getopt stuff. But, with
the introduction of our first numeric switch it should
have been made even more robust than, in fact, it was.
This commit will now accomplish such a desirable goal.
Reference(s):
. added '1' command line switch
commit 5e708c5db7
Signed-off-by: Jim Warner <james.warner@comcast.net>
All of top's display was designed to fit into an 80x24
terminal. This includes the help screens plus both the
Summary and Task Areas, assuming no saved config file.
With release 3.3.10, the startup defaults were changed
assuming ./configure --disable-modern-top wasn't used.
This was done in the hope of introducing some users to
unknown capabilities such as colors, forest view, etc.
The purpose of this commit is to coax a few more users
into possibly exploring another capability: scrolling.
We do so by tweaking the default startup display so as
to show full command lines. Now, when things no longer
fit in 80x24, horizontal scrolling might be exploited.
[ of course, this can be reversed with the -c switch ]
[ this patch has been adapted from the master branch ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
If built without ./configure --disable-modern-top, the
program displays each cpu individually providing there
is sufficient vertical screen real estate. For massive
SMP environments this will necessitate use of a config
file where the cpu summary toggle ('1') could be saved
via the 'W' command. But, an rcfile may not be viable.
So this commit introduces a '1' command line switch to
emulate exactly the effects of the interactive toggle.
And since it is our first numeric switch some existing
parsing logic had to be changed slightly. Such changes
are, in truth, an improvement. For example, instead of
seeing "inappropriate '2'" with ./top -2 we'll now see
the vastly more appropriate error "unknown option '2'.
References(s):
https://gitlab.com/procps-ng/procps/issues/55
[ this patch has been adapted from the master branch ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
In their 3.2.7 version of top, Redhat introduced an -M
switch to automatically scale Summary Area memory data
to avoid truncation (and the resulting '+' indicator).
The procps-ng top does not employ suffixes with memory
data nor does it allow for different scaling with each
separate value. Rather, scaling appears at line start.
If built without ./configure --disable-modern-top, the
Summary Area memory will be scaled at GiB which should
lessen chance of truncation. Otherwise KiB was used to
reflect such memory, increasing the truncation chance.
And while 'W' can be used to preserve some appropriate
scaling value, there are arguments against such rcfile
approaches as cited in the issue and bug report below.
So this commit will bump the Summary Area memory scale
factor from KiB to MiB when using --disable-modern-top
as a concession to that Redhat bug report noted below.
And it also introduces a new command line switch which
can force any desired scaling regardless of the rcfile
or which ./configure option might have been specified.
[ for top's help text we'll show 'E' as if it were a ]
[ switch without arguments in order to keep the help ]
[ text displayable without wrap in an 80x24 terminal ]
[ the man page, however, will show all k-e arguments ]
Reference(s):
https://gitlab.com/procps-ng/procps/issues/53https://bugzilla.redhat.com/show_bug.cgi?id=1034466
[ this patch has been adapted from the master branch ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
After much reflection I've come to the conclusion that
displaying 3 decimal places (usually) when memory data
had been scaled is no longer optimal with today's ever
increasing amounts. And given that not all task memory
fields are the same widths, inconsistencies can easily
arise as illustrated and discussed in the issue below.
Instead of unilaterally reducing the number of decimal
places, this commit will sneak in such a change via an
existing configure option that was very likely unused.
The former 'disable-wide-memory' option has now become
'enable-wide-memory', which can be used if the current
behavior (3 decimal places) is preferred. Without that
option, whenever memory is scaled beyond KiB, just one
decimal place will be shown in Summary and Task areas.
And Task area field width will no longer be changed by
this revised configure option. Instead, all such field
widths will now be fixed at the former maximum values.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/50
[ this patch has been adapted from the master branch ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Original report:
When trying kill a process with insufficient privileges (see blow),
pkill displays the error message “... failed: Operation not permitted”,
but returns 0. Surely it should return 3?
$ pkill syslogd ; echo $?
pkill: killing pid 373 failed: Operation not permitted
0
Return value 0 means one of more things matched. For a pgrep (which
shares code with pkill) this makes sense, there was a match. It seems
wrong for pkill to return 0 when it in fact could not do what you told
it to. However return value 3 means a fatal error and it's not fatal.
Looking at other programs when trying to kill things it cannot kill.
shell kill returns 1, procps kill returns 1, killall returns 1, skill
returns 0 (and says it was successful!, ah well poor old skill)
The consensus seems to be that you return 1 if you cannot kill it, even
if you found it. In other words the return value for both not found and
not able to kill it is the same.
pkill only returns 0 if something was killed. This means we found a
match AND the kill() system call worked too.
References:
https://bugs.debian.org/852758
Signed-off-by: Craig Small <csmall@enc.com.au>
This patch adapts a master branch commit to our newlib
branch. Shown below was that original commit msg text.
------------------------------------------------------
top: Add unobtrusive XDG support
By default the file HOME/.toprc will be prefered. This ensures there
should be minimal breakage even if this file is later created by some
other means. Otherwise we will follow the new behaviour described by
the XDG Base Directory Specification:
If the XDG_CONFIG_HOME environment variable is available we will attempt
to use this as XDG_CONFIG_HOME/procps/toprc otherwise we will fall-back
to HOME/.config/procps/toprc instead.
Signed-off-by: Earnestly <zibeon@gmail.com>
------------------------------------------------------
Reference(s):
. master branch original
commit 0a0f7d60e309c13c8a399bc2187bed6e3e156b43
. discussion thread
https://gitlab.com/procps-ng/procps/merge_requests/38
Signed-off-by: Jim Warner <james.warner@comcast.net>
This avoids situations where longer regex which matches short-named proc
is used. Test for pgrep updated.
This is the newlib update of 5d12be1b7e8cc690a4d8778754aae5db4c07db2b
Signed-off-by: Craig Small <csmall@enc.com.au>
Since its introduction, our evolved /proc/stat API has
relied on a static buffer of 8192 bytes. This approach
is probably Ok for other /proc files but it would only
accommodate around 100 processors. If such a threshold
were exceeded then this interface could never succeed.
Now days 100 processors doesn't seem at all excessive.
So this commit trades that static buffer for a dynamic
self-tuning one. And since so much former top CPU code
was already rolled into this module, we just stole the
already proven top dynamic buffer management code too.
[ this also meant switching low level unbuffered I/O ]
[ calls to standard library buffered I/O calls. that ]
[ is exactly what <slabinfo> and <diskstats> employ. ]
Reference(s):
. 1st gen readstat introduction
commit a410e236ab
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the addition of those new derived SUM values, any
CPUs taken offline or brought online would distort the
historical (delta) results. So this patch just forces
a history reset when such transitions are encountered.
Reference(s):
. derived SUM provisions introduced
commit 2c86c4984a
Signed-off-by: Jim Warner <james.warner@comcast.net>
For each of those interfaces employing a priming read,
all the other 'read' functions begin with the module's
name except this guy which began with 'read_slabinfo'.
Now, they'll all begin with their module name then end
the same with a '_read_failed' boolean hinting suffix.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Upon reflection, at the point where the 'priming read'
was introduced, any possibility of history distortions
was also eliminated. This was true because all of the
'old' (zeroed) data will have been replaced with 'new'
data whenever a user finally calls get, select & reap.
Thus, any DELTA values will automatically reflect that
interval between 'new' and subsequent retrieval calls.
[ diskstats didn't actually employ a 1st time switch ]
[ like the others so we have changed a comment only. ]
[ but that module will retain something similar used ]
[ inside node_update whenever a new node is created. ]
Reference(s):
. priming read added to slabinfo
commit 5d5a52a380
. priming read added to diskstats
commit ecd64f4445
. priming read added to meminfo, stat, vmstat
commit 1a2b62c779
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just exploits those new library provisions
for tic categories, introduced in the preceding patch,
which had been prompted by the issue referenced below.
[ ok it also corrects the top graph for system usage ]
[ since this turkey failed to include tics for these ]
[ two interrupts: STAT_TIC_IRQ and STAT_TIC_SOFTIRQ. ]
Reference(s):
https://gitlab.com/procps-ng/procps/issues/48
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit arose out of the discussion (and research)
surrounding the issue cited below. It is an attempt to
consolidate and standardize the calculation of jiffies
categories (e.g. 'idle', 'busy', etc.) once & for all.
Also included is the enum STAT_TIC_NUM_CONTRIBUTORS in
case anyone, in the future, decides to calculate usage
based upon elapsed time * Hz (like top does in process
level %CPU stats). In such an event, a total number of
CPUs or NUMA Nodes would be needed for proper scaling.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/48
Signed-off-by: Jim Warner <james.warner@comcast.net>
Unlike the ps kludge under the master branch to ensure
that namespaces appear the same under both 32 & 64-bit
models, this newlib branch already used a proper type.
However source data still carried the original type as
'signed long' versus that more proper 'unsigned long'.
So, this patch makes sources & destinations identical.
Reference(s):
. master branch ps kludge
commit c41c614b0c
Signed-off-by: Jim Warner <james.warner@comcast.net>
Aw shucks, not all support for this defunct enumerator
was removed via the commits shown below (but, is now).
[ what remained were just variables named after that ]
[ deprecated/deleted enumerator, but still & all ... ]
[ plus, i have left the doc/libproc.3 file untouched ]
[ since it already appears badly out of date anyway! ]
Reference(s):
. ps references partially purged
commit 66c4024d75
. enumerator purged from library
commit 912075605b
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit will resolve the RedHat Bugzilla #1322111.
[ import from identical commit against master branch ]
[ but without trailing whitespace, thank you so much ]
Imported by: Jim Warner <james.warner@comcast.net>
While a Debian bug report referenced below was limited
to the 'eip' and 'esp' fields, this patch also extends
address width adaptations to some other addresses too.
[ and, we do so in a far less invasive manner than a ]
[ redhat approach shown below adding two new fields! ]
Reference(s):
. new debian bug report
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=846361
. old redhat solution
https://bugzilla.redhat.com/show_bug.cgi?id=244152
Signed-off-by: Jim Warner <james.warner@comcast.net>
In each module employing a priming read at 'new' time,
should that read fail, a call to 'unref' will be made.
However, there is a hidden dependency that these calls
must never occur before the context 'refcount' was set
due to the way an 'unref' conditional was constructed.
So this commit just ensures that 'unref' will function
as expected, even if called with a 'refcount' of zero.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the commit referenced below, in addition to several
tweaks to comments, 3 fields were no longer assured of
being present in the results stacks. However, 2 of the
3 fields might, in fact, be required even if they were
not currently being displayed in any of the 4 windows.
The PIDS_CMD is used in two separate 'Inspect' headers
('Y' command) and the PIDS_ID_EUID is required if that
'User Filter' ('u' or 'U' command) was being employed.
That latter field's inclusion will be made conditional
but the former field must be unconditionally included.
( for old top, PIDS_CMD would have always been there )
Reference(s):
commit 4e4debda9b
Signed-off-by: Jim Warner <james.warner@comcast.net>
No longer will ps print nwchan as 'ffffff', '-' or '1'
since the proc/PID/stat wchan field didn't represent a
real address anyway. Rather, the field will henceforth
output a dash ('-'), the ps customary 'not available'.
That man document was also tweaked to better represent
actual behavior. An asterisk ('*') was never shown for
threaded tasks and that dash ('-') usually didn't mean
running tasks (sometimes associated with permissions).
Signed-off-by: Jim Warner <james.warner@comcast.net>
Removing the Item_table 'stat' oldflags for WCHAN_ADDR
was wrong since that 'stat' field is not a constant 0.
Rather, it could assume these 3 values: -1, 0, and +1.
I have not been able to pin down a '-1' result, but it
probably means some sort of permission error (-EPERM).
The '1' or '0' values were supposed to distinguish the
tasks that were or were not blocked (whether there was
a wchan address). However, in practice there is little
correlation between those values and availability of a
kernel symbol in /proc/$$/wchan (perhaps due to race).
Anyway, the real point is that a 'stat' wchan does not
now intentionally contain an address. Thus, outputting
'ffffff', '-' or '1' in programs like ps is senseless.
So this patch just eliminates PIDS_WCHAN_ADDR from our
item enumerators leaving only the PIDS_WCHAN_NAME guy.
Now the new library can't be blamed for bad addresses!
Reference(s):
. removed Item_table 'oldflags'
commit c4aa6c0ab4
. linux removal of wchan addresses
commit b2f73922d119686323f14fbbe46587f863852328
Signed-off-by: Jim Warner <james.warner@comcast.net>
It makes no sense to begin our tracked nested level at
'1' then later require a '1' to be subtracted from the
level as artwork and indentation is added for display.
By beginning such tracked levels at zero, we can avoid
the need to adjust it & use it directly in a snprintf.
Signed-off-by: Jim Warner <james.warner@comcast.net>
It would have been nice to remove this 'nDRT' guy from
the fields management screen and man document as well.
But, while this version of top could be made to handle
an older rcfile, the reverse would not have been true.
Besides, it's been zero for so long already we'll just
include a 'deprecated' note in top's man page for now.
[ the 'nTH ' field number was corrected in there too ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
It seems inappropriate to blindly include fields known
to always be zero in our brand new library. Therefore,
this patch removes support for three such enumerators.
[ that stat 'it_real_value' (PIDS_ALARM) field could ]
[ have been made obsolete before a linux 2.6 release ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just contains some tweaks to comments plus
a few adjustments to whitespace for alignment purposes
and a normalization of the header inclusion #define's.
[ plus a spelling error in one header file was fixed ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When this module was upgraded to 3rd generation in the
patch referenced below, numa node support was migrated
from the top program into newlib. The 'guest_nice' and
'guest' tics were overlooked as top did not need them.
So, this commit corrects that oversight and achieves a
proper symmetry between the cpu & numa jiffies counts.
Reference(s):
. 3rd gen redesign, numa support imported
commit abc71a46ad
Signed-off-by: Jim Warner <james.warner@comcast.net>
Maybe some folks still need a few .gitconfig tweaks to
catch the trailing whitespace errors a little earlier.
Or, at the least, after a local commit they should do:
$ git diff HEAD~1
[ and then check if git marks any with his red blobs ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
A priming read at 'new' time in that <slabinfo> module
was important so that permission problems are detected
early. Plus, it also had the potential of making delta
values valid when 'get' or 'select' were first called.
It is for that latter reason that such a read was also
incorporated in the <diskstats> module 'new' function.
No other module, however, employed such priming reads.
This patch just brings those potential benefits to all
of our other newlib modules with the exception of that
<pids> guy. That module is, of necessity, sufficiently
different from those others to justify such exclusion.
Not only are there precious few DELTA enums in <pids>,
but the costs of a priming read would be much greater.
[ otherwise, these newly added priming reads have no ]
[ measurable negative impact on performance/timings. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
The <slabinfo> header provides 3 groups of enumerators
with prefixes of SLABINFO, SLABS & SLABNODE. The first
is strictly user oriented & isn't supported internally
by any structure. The other two, however, have structs
associated with 'em but, unfortunately, 1 is misnamed.
The 'struct slabs_node' is associated with 'nodes' and
supports the enumerators with the SLABNODE prefix. But
the 'struct slabs_hist' was associated with 'hist' yet
supports those enumerators with just the SLABS prefix.
We do not care very much what some structure is called
but we do care about an identifier used manipulate it.
This patch will trade the 'hist' identifier associated
with 'struct slabs_hist' for a more congruous 'slabs'.
[ it's awful when the author can't remember what the ]
[ true meaning of an identifier is after creating it ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
If, in fact, numa nodes are dynamic (like that current
total of on-line cpus) the existing logic was lacking.
It included an early return before checking the total.
So, this commit ensures that the nodes total is always
set or updated consistently in only a single function.
There's no need to set it at the time 'new' is called.
[ and since under our existing code this nodes total ]
[ could never possibly have been zero, the erroneous ]
[ test (with the early return) has now been whacked! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since our library is responsible for NUMA support, and
since the top program already accommodates the lack of
NUMA data, there's no reason that #define NUMA_DISABLE
need be explicitly referenced in the top source files.
Ergo, this commit just eliminates all such references.
Now, top will rely only on procps_stat_reap() results.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This just brings the newlib branch NEWS into line with
the current version from our master branch since those
changes have already been incorporated in this branch.
Signed-off-by: Jim Warner <james.warner@comcast.net>
