Commit Graph

511 Commits

Author SHA1 Message Date
Jim Warner
6b4e4a006c top: man page reflects '-H' impact for '-p' provisions
Reference(s):
https://www.freelists.org/post/procps/important-extension-to-newlib,4

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-17 22:06:57 +10:00
Jim Warner
bddc9fb3e6 top: thread mode transitions should remove focus ('F')
The commit referenced below forced a return to row one
whenever there was a thread mode transition. Now, with
our new focus ('F') feature, we should adopt a similar
philosophy so as to avoid potential display anomalies.

Reference(s)
. Jun 2018, force row 1 w/ thread mode transition
commit 9dd7a97c4a

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-17 22:06:57 +10:00
Jim Warner
5e6b354a0c top: document summary area changes involving 2 abreast
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-06 20:19:18 +10:00
Jim Warner
8ef60b84af top: allow the summary memory lines to print 2 abreast
The commit shown below introduced two abreast printing
for %Cpu statistics. But, the Memory & Swap lines have
always been printed on separate lines when '4' was on.

With this commit, those lines will now be treated just
like %Cpu stats, either separate lines or two abreast.

Reference(s):
. May 2020, added '4' toggle for 2 abreast
commit fca48e7e99

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-06 20:19:18 +10:00
Jim Warner
c725207c44 top: add a visual separator to lines printed 2 abreast
When the '4' toggle is on, and Summary Area %Cpu lines
are shown two abreast, it's not always clear where the
separation is between the two processors. So with this
patch we'll now print a vertical bar separator between
them (looking similar to the existing field headings).

We will also reduce that 'GRAPH_suffix' constant to 1,
reflecting the the trailing ']' bracket only, so as to
maximize top's exploitation of available screen width.

[ plus a superfluous double '+ +' has now been fixed ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-06 20:19:18 +10:00
Jim Warner
d19ee838a6 top: new #define added for focus ('F') toggle tweaking
Just to see if I could, the new #define will force the
indentation of a parent task to be reset to zero while
maintaining the proper child indentation relationship.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-01 20:39:46 +10:00
Jim Warner
02a4220a56 top: introduced new focus toggle ('F'), man doc & NEWS
[ i also corrected an unrelated typographical error! ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-01 20:39:46 +10:00
Jim Warner
bdd50fa2fc top: introduced new focus toggle ('F'), program source
Sometimes, it might be useful to isolate a parent task
and its forked children from other system activity. As
an example, a user might want to examine workload in a
specific lxc container. Or maybe there is some need to
question what's happening under the same tmux session.

Since forest view mode tends to be a relatively stable
display, it will sometimes satisfy the above need. But
that mode can't currently guarantee the target process
always remains as the topmost task or even is visible.

So, this patch will enable focusing on any parent task
and keeping it as the topmost process while displaying
it and its forked children only. It then appears as if
there is no other activity in that system by virtue of
the blank lines which follow that final child process.

To implement this new feature, top's redundant 'F' key
has been repurposed. It made little sense devoting two
keys to the Fields Management screen (especially since
the key we've taken required two separate keystrokes).

[ and while we're at it, i also added punctuation to ]
[ that prologue for 'forest_display' since all other ]
[ forest functions used punctuation. And, instead of ]
[ a pointer to a proc_t he will now get a ppt index. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-01 20:39:46 +10:00
Jim Warner
37f1060299 top: fix a fix for the 'bye_bye' function (merge #127)
In the merge request shown below, 1 too many bytes are
written to stdout thus including the terminating null.
As the cure, this commit just reduces the length by 1.

[ along the way, we will remove some unneeded braces ]
[ plus add some additional comments with attribution ]

Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/127
. original merged change
commit 0bf15c004d

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-06-23 18:24:50 +10:00
Jim Warner
dc8137f85b top: refactor 'mkVIZ' support to avoid future problems
In the patch referenced below, 2 potential abends were
fixed both of which involved 'alternate display mode'.

The root cause of those abends was a negative value in
the 'begnext' field for other than the current window.

And while that potential is fixed for now the existing
code almost invites such problems again in the future.

So, this patch will remove any temptation to name some
other window in the 'mkVIZrow1' macro. And, since that
macro is not the only source of 'begnext' changes, the
'mkVizrowX' is being added to identify such occasions.

[ and for symmetry i've added a 'mkVIZyes' macro and ]
[ ameliorated an otherwise surreptitious assignment! ]

Reference(s):
commit 84e85611c3

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-06-17 16:46:33 +10:00
Jim Warner
84e85611c3 top: fix two potential 'alternate display mode' abends
This commit will address potential abends upon leaving
the windows help or color mapping screens and invoking
alternate display mode ('A').  It only happens if that
current window was changed with multiple 'a'/'w' keys.

So now, rather than leaving a trail of negative values
in the 'begtask' field, compliments of that win_select
function, we'll remove the mkVIZrow1 macro. Henceforth
it will be issued just once per user interaction. Thus
a promise of 'Curwin' only being impacted is restored.

[ my thanks to Vladimir Chren for reporting this bug ]

Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/210
https://gitlab.com/procps-ng/procps/-/merge_requests/135

Discovered by:Vladimir Chren <vladimir.chren@gmail.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-06-02 20:06:32 +10:00
Jim Warner
e400f0be47 top: extend end-of-job report to reflect unused fields
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-06-02 20:06:32 +10:00
Jim Warner
7086e99067 top: eliminate the #define VER_J_RCFILE as superfluous
With that commit referenced below, which preserved the
'4' and + '!' toggles in the rcfile, this VER_J_RCFILE
macro was made superfluous. But, it was never removed.

Reference(s):
commit f858e563b7

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-06-02 20:06:32 +10:00
Shaohua Zhan
0bf15c004d top: In the bye_bye function, replace fputs with the write interface.
When top calls malloc, if a signal is received, it will
call sig_endpgm to process the signal. In the bye_bye function, if the
-b option is enable, the Batch variable is set, the fputs function
will calls malloc at the same time. The malloc function is not reentrant, so
it will cause the program to crash.

Signed-off-by: Shaohua Zhan <shaohua.zhan@windriver.com>
2021-03-18 15:46:46 +08:00
Jim Warner
8ff0dcbd4b top: tweak cmd/cmdline logic for a possible bad locale
Since this master library isn't quite as sophisticated
as the newlib version, this patch will protect against
the possibility of multibyte characters in a program's
name combined with some locale without UTF-8 encoding.

[ it is better to treat the COMMAND column length as ]
[ more than what's actually printed than to have the ]
[ line overflow & corrupt the remaining screen lines ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-01-02 15:40:02 +11:00
Jim Warner
c76144ead1 top: added utf8 multibyte support to additional fields
When any process' command line contains multibyte utf8
characters, two separate display problems could arise.

1. If that COMMAND column is not displayed as the very
last field, then field(s) to the right are misaligned.

2. Even when last, should utf8 string length (not that
display length) exceed allowable screen width, it will
nonetheless suffer from improper premature truncation.

Number 1 is less of a concern since the cmdline column
is likely to always be the last field to be displayed,
if only to enable right and left scrolling provisions.

Number 2 is much more likely to occur, especially with
additional fields which might be shown before COMMAND.
Or, forest view child tasks can yield the same effect.

So, this commit will permit the correct utf8 multibyte
display regardless of field position or string length.

And, we'll bring top into line with the ps program for
additional fields potentially subject to utf8 display.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-12-29 08:42:28 +11:00
Jim Warner
9165f79fc1 top: correct one spelling oops in a programmer comment
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-12-29 08:42:28 +11:00
Jim Warner
2a5b8658d2 top: a small safeguard added to the ATEOJ_RPTHSH logic
If a hash results report was output (via ATEOJ_RPTHSH)
a portion is devoted to occupied table entries ordered
by depth. There is a possibility that some depths will
not be found among existing occupied table entries and
to avoid any confusion probably should not be printed.

[ to illustrate the potential for confusion prior to ]
[ this patch, force a very small table size (like 8) ]
[ and then arrange to trigger the end-of-job report. ]

So this patch ensures only 'in use' entries are shown.

[ admittedly, all of the remaining logic in the loop ]
[ could/should be subordinate to this new 'if' test, ]
[ but we will keep the change to a minimum. besides, ]
[ there's no harm subtracting/adding a zero numdepth ]
[ especially since the chance of a zero is very low. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-10-24 18:29:13 +11:00
Jim Warner
d10c8fccc9 top: just a small tweak to that history hash algorithm
This patch just raises the size of the hash table used
to calculate elapsed task stuff. The net result should
be less need for 'chaining' under pid hash collisions.

[ the hash scheme is intentionally kept as primitive ]
[ and, therefore, as fast as possible. it employs an ]
[ 'and' approach versus a 'mod' operation since both ]
[ yield similar distribution but the former approach ]
[ was 4 fewer cpu instructions in terms of overhead. ]

[ additionally, for hash collisions, 'chaining' uses ]
[ an array index rather than the usual pointer since ]
[ the HST_t guys may move when they are reallocated. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-10-11 17:51:49 +11:00
Jim Warner
6e1715d9eb top: fix additional SEGVs if no tasks were displayable
This patch is an outgrowth of that commit shown below.

Many additional potential segmentation faults might be
encountered if interactive commands are opened up to a
user when a '-p' switch has a single non-existent pid.

[ always the 'k', 'L', 'r', 'Y' keys & maybe 'v' too ]

So, this patch will restrict such a loser (oops, user)
to a reduced subset of normal commands until he/she/it
quits then restarts top with something to be displayed
or issues the '=' command overriding that '-p' switch.

Reference(s):
commit f57a0301e3

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-09-16 14:27:31 +10:00
Jim Warner
f57a0301e3 top: fix potential SEGV when no tasks were displayable
This patch fixes a nearly decade old bug discovered by
Frederik Deweerdt. His merge request shown below would
be an adequate solution except for iterative overhead.

This alternate patch will represent substantially less
overhead for an admittedly extremely rare possibility.

Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/114

And-thanks-to: Frederik Deweerdt <fdeweerdt@fastly.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-09-13 10:28:50 +10:00
Jim Warner
7a19961fc2 top: update user/system cpu % graph content (man page)
What had been stated as the contents of the cpu graphs
was never really inclusive enough. Those recent newlib
tweaks highlighted the need for these man doc changes.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-09-13 10:28:50 +10:00
Jim Warner
762249e8ec top: even more useless cosemetic stuff (only comments)
[ this is what happens when i've run out of bugs and ]
[ issues and am now left with way too much free time ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-09-13 10:28:50 +10:00
Jim Warner
072a850761 top: more useless cosemetic changes (chiefly comments)
All of these changes are self-explanatory, so I'll not
provide any more comments thus avoiding further shame.

[ everything's perfectly justified and right margins ]
[ are filled entirely, but of course it must be luck ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-09-13 10:28:50 +10:00
Jim Warner
71d49f168a top: for consistency, reposition a few man page macros
This patch just repositions some .PP macros so they'll
immediately precede the paragraphs to which they apply
rather than a comment line used as a visual separator.

[ ok we also update the document date to 'July 2020' ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-07-29 18:58:33 +10:00
Jim Warner
78053c85fc top: address several 'mandoc -Tlint' errors & warnings
This commit addresses the errors/warnings shown below.

Reference(s):
ERROR: skipping end of block that is not open: RE
WARNING: skipping paragraph macro: sp after PP
WARNING: skipping paragraph macro: PP empty

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-07-20 16:12:00 +10:00
Jim Warner
3e92b4c9ff top: make that 'cpu_prt' function a tad more efficient
This commit only eliminates two 'nop' instructions and
one 'jmp' instruction. However, it makes that C source
code look a little bit prettier than it looked before.

[ and yes, some unnecessary parenthesis were used to ]
[ force an alignment of some related lines. it costs ]
[ us nothing in extra code yet helps in readability. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-07-20 16:12:00 +10:00
Jim Warner
246c5fa812 top: make the 'cpu_tics' function a tad more efficient
This patch eliminates one variable which resulted in a
corresponding elimination of three 'mov' instructions.

[ that was 6 bytes per 'mov' for a total of 18 bytes ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-07-20 16:12:00 +10:00
Jim Warner
63691d6734 top: raise the amount by which top's stat buffer grows
We won't go as far as the merge request shown below in
increasing buffer size, but we'll reduce substantially
total iterations while growing it to achieve one read.

[ and this seems in line with what was recently done ]
[ to accommodate the massively parallel environments ]
[ thru 2 abreast ('4') and combined cpus ('!') modes ]

Reference(s:
https://gitlab.com/procps-ng/procps/-/merge_requests/105

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-06-29 21:12:02 +10:00
Jim Warner
c509d9bcbb top: provide for zero length character in utf8 support
This commit is prompted by the preceding change to the
library's escape.c module which, in turn, was prompted
by that issue shown below (with thanks to Konstantin).

Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/176

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-06-23 19:05:03 +10:00
Jim Warner
e3249ebb97 top: some miscellaneous accumulated tweaks and cleanup
I've grown to hate that man document rendering when it
comes to hyphenation. So this patch will eliminate it.

And we'll also eliminate an unnecessary initialization
in that top program code concerned with combined cpus.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-06-23 19:05:03 +10:00
Jim Warner
f0fb35b645 top: fix a minor startup flaw for the '2 abreast' mode
This ensures that a single '4' keystroke will reliably
toggle the new 2 abreast mode ON. Depending on whether
an older configuration file existed or whether top was
configured with '--disable-modern-top', keying the '4'
for a second time might otherwise have been necessary.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-06-04 20:16:21 +10:00
Jim Warner
f73d8d180f top: help the '#define PRETEND48CPU' be more realistic
The previous PRETEND8CPUS #define was recently changed
to PRETEND48CPU to better exercise the new '4' and '!'
toggles. But, the implementation simply duplicated the
/proc/stat summary line for each cpu. Therefore, every
cpu showed the same graph/detail (depending upon 't').

This patch shows the actual individual cpu information
(duplicated, of course, when total cpus are exceeded).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-06-04 20:16:21 +10:00
Jim Warner
f858e563b7 top: preserved those new '4' and '!' toggles in rcfile
This patch will address Craig's feedback regarding the
original implementation of top's two new toggles. It's
likely other users would have questioned why they were
not saved also, once they discover these new features.

And, since the minimum terminal width was just lowered
to 80 columns, the default for window #1 is also being
changed to show the individual cpu graphs two abreast.

[ assuming no '--disable-modern-top' for ./configure ]

Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/172
https://www.freelists.org/post/procps/two-major-changes-to-top,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-31 21:59:57 +10:00
Jim Warner
ad6917e3cf top: warn users if rcfile save prevents older top read
I'm about to break older top rcfile compatibility when
preserving those two new toggles. And, though this has
happened several times over the years, we never issued
any warnings that such thing was just about to happen.

So, this patch corrects the long standing shortcoming.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-31 21:59:57 +10:00
Jim Warner
6db0d5eab6 top: reduce minimum terminal width with 2 abreast mode
For the original implementation of the '4' toggle, the
minimum width was set at 165 columns. This was done to
avoid truncations when detailed cpu statistics (versus
graphs) were being displayed. Those can not be scaled.

Upon reflection, it seems more appropriate to give the
user the choice of whether or not to truncate. And, by
reducing that minimum width requirement to 80 columns,
we'll vastly expand potential use of two abreast mode.

[ we'll keep that original as '#define TOG4_NOTRUNC' ]

The patch also updates the man document appropriately.
Along the way, we will trade the potentially confusing
word 'adjacent' for the more natural 'additional' when
detailing the '!' toggle in 4b. Summary-Area-Commands.

Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/172
https://www.freelists.org/post/procps/two-major-changes-to-top

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-31 21:59:57 +10:00
Jim Warner
e5ddd7ff55 top: address each of the most recent coverity warnings
This patch attempts to supress the following warnings:

. MISSING_BREAK, TAINTED_SCALAR plus SIZEOF_MISMATCH .

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-31 21:59:57 +10:00
Jim Warner
a8a6005d32 top: bump up that PRETEND8CPUS #define to PRETEND48CPU
This patch simply allows for better testing of our two
new toggles: '4' (2 abreast) plus '!' (combined cpus).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-28 19:37:58 +10:00
Jim Warner
f6a40a8fdb top: add '!' toggle for combined cpus display, man doc
Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/172

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-28 19:37:58 +10:00
Jim Warner
5e1e14b019 top: add '!' toggle for combined cpus display, program
When implementing that earlier '4' toggle, in response
to the issue referenced below, I got to thinking about
those environments with massively parallel processors.

Such environments may not benefit from the '4' toggle.

So, I decided to implement a feature that could enable
use of those '1' and/or '4' toggles no matter how many
active processors top may have ultimately encountered.

With the new '!' toggle, adjacent cpus can be combined
to any degree, represented as a single cpu group/line.

Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/172

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-28 19:37:58 +10:00
Jim Warner
f93980910e top: add '4' toggle for 2 abreast cpu display, man doc
Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/172

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-28 19:37:58 +10:00
Jim Warner
fca48e7e99 top: add '4' toggle for 2 abreast cpu display, program
In the back of my mind, I've always wanted to enable a
two abreast cpu display. Folks with massively parallel
machines must surely have been frustrated with the '1'
toggle when Off (individual cpus in the Summary Area).

So, I'll use that recently raised issue shown below as
a justification for finally implementing this feature.

Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/172

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-28 19:37:58 +10:00
Jim Warner
43a8d0328d top: eliminate a long standing extraneous comment line
Wow, hard to believe the extraneous comment line dates
all way back to an introduction of NLS support (2011).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-28 19:37:58 +10:00
Jim Warner
fd7c66dd7b top: updated man page and copyright dates to year 2020
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-04-20 22:05:34 +10:00
Jim Warner
f7dc5b1728 top: for symmetry with 'E' add 'e' command line switch
Several years after the 'e' & 'E' interactive commands
were introduce to affect memory scaling, an 'E' switch
was added. This was after discovering a dropped Redhat
patch which provided a unique 'M' command line switch.

If only for symmetry it makes sense to offer a similar
command switch ('e') for the Task Area memory scaling.

As was true with 'E', top's help text will show 'e' as
if it were a switch without arguments in order to keep
help text displayed without wrap in an 80x24 terminal.
The man page, however, will show all of the arguments.

Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/165
. 03/2017, added 'E' command line switch
commit fb48b5d9fb
. 12/2012, added 'e' interactive command
commit 21e550bc08
. 12/2012, added 'E' interactive command
commit bc46f67f9a

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-04-10 14:35:17 +10:00
Jim Warner
2d94282224 top: eliminate inadvertent trailing double semi-colons
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-04-10 14:35:17 +10:00
Jim Warner
5cd29e5093 top: restore configuration file backward compatibility
The Debian bug referenced below has nothing to do with
locales. In fact, top was made locale independent back
in release 3.3.13 (April, 2018). However, that bug did
reveal some misplaced logic which this patch corrects.

Prompted by the Qualys audit, all rcfile field strings
were checked for potential duplicates which could only
have resulted from some user's manual/malicious edits.

Unfortunately, that code was executed before top had a
chance to enforce the proper/maximum string length (in
the event an extremely old rcfile had just been read).
This created some potential string overrun references.

In top's original 3.3.15 implementation, the potential
overrun extended for 15 characters. That is the number
of field characters added with 3.3.9 (December, 2013).
But, since strchr() was used, no error exit was taken.

In the revised 3.3.16 implementation, the strchr() was
replaced with '&w->rc.fieldscur[n]'. This held overrun
to a single position while producing an error message.

So, this commit just moves that logic to a point where
fieldscur is guaranteed to be longer than EU_MAXPFLGS.

Reference(s):
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=951335
. revised 3.3.16 validation logic
commit 291d98ee50
. original 3.3.15 validation logic
commit fdb58974e2

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-02-18 11:20:58 +11:00
Jim Warner
ed34b1228e top: restore one line of code to sig_endpgm() function
When that potential abend at program end was addressed
in the patch shown below, one line of code was removed
in error. That line served to suppress some end-of-job
reports should ATEOJ_RPTSTD or ATEOJ_RPTHSH be active.

So, this patch restores that previously deleted logic.

Reference(s):
. potential SEGV fix, master branch
commit d37f85c269

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-02-18 11:20:58 +11:00
Jim Warner
9e4c2cca39 top: at abnormal end allow core dumps (fix qualys bug)
A Qualys audit patch, represented in the commit below,
added the _exit() call to our abnormal signal handler.
Unfortunately, that disabled the associated core dump.

This patch restores expected behavior of those signals
whose default produces a core dump file + termination.

Reference(s):
commit 0847390b83

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-01-06 09:13:29 +11:00
Jim Warner
ba5f1e5449 top: reposition some data due to a translation comment
In a translator hint, under a caution, a reference was
made to the "next three items". Unfortunately however,
there was one intervening 'item' to which that caution
did not apply. This commit just relocates that 'item'.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-01-06 09:13:29 +11:00