This commit addresses a potentially disastrous flaw in
that fatal_proc_unmounted() function wherein requested
item(s) might not have been returned to the caller yet
were specified at the time of a 'new' or 'reset' call.
The root cause, uncovered by Craig, was due to the old
library look_up_our_self() support function which only
would populate a proc_t with limited 'stat' file data.
This routine will now act the same as all other <pids>
functions which return a stack or stacks. Whatever was
specified with a 'new' or 'reset' will be returned, if
the passed 'return_self' parameter is other than zero.
[ as is so often the case, when flawed code is fixed ]
[ former complexity can be reduced as a side benefit ]
Reference(s):
https://www.freelists.org/post/procps/issue-245-plus-one,2
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the next commit the fatal_proc_unmounted function
will be refactored to behave as it always should have.
So, a need for the user 'stat' caution will disappear.
Reference(s):
. original man page change
commit 7d44c94317
Signed-off-by: Jim Warner <james.warner@comcast.net>
Gosh this particular flaw originated way back in 2015.
[ that was when we burdened a caller with additional ]
[ responsibilities for 'stacks_alloc', 'stacks_fill' ]
[ and 'stacks_dealloc'. damn implementation details. ]
Reference(s):
. Aug, 2015 - introduced<pids> api
commit 7e6a371d8a
Signed-off-by: Jim Warner <james.warner@comcast.net>
Discovered this while trying to port programs that use the deleted
libprocps function look_up_our_self() which can be found with the
fatal_proc_unmounted() function.
While procps_pids_new() will allow you to specify any items you
care to think of, a subsequent call to fatal_proc_unmounted()
will only fill in the values found in /proc/self/stat.
Added a caveat to the procps_pids manpage pointing out this
limitation.
References:
https://salsa.debian.org/xorg-team/app/apitrace/-/blob/debian-unstable/lib/os/os_memory.hpp#L44https://gitlab.com/-/snippets/2377884
Signed-off-by: Craig Small <csmall@dropbear.xyz>
In that issue cited below, Tyson Nottingham identified
a potential abend which was associated with 'alternate
display mode' plus that troublesome 'mkVIZrow1' macro.
He also offered a perfectly adequate fix for that bug.
I refer to that macro as troublesome since it's now so
widely used and sometimes (by design) causes 'begtask'
to go negative (invalid). And now I found yet one more
place where it should have been used but wasn't ('f').
It's also troublesome as evidenced by some git history
listed below. Heck, there was even a commit addressing
the same symptoms (alternate display mode abend) which
Tyson suffered. Clearly, the current design is flawed.
So, with those two issues in mind, I've refactored the
approach to maintaining a visible task in the 1st row.
Henceforth, a 'mkVIZrow1' macro will be issued in only
two places: once at startup and after most keystrokes.
Such an approach likely results in additional calls to
the 'window_hlp' routine that aren't really necessary.
But, it provides a cleaner design less prone to errors
in the future. Besides, such additional overhead would
only be incurred when interacting with the user. Thus,
new costs are of no concern and will never be noticed.
Reference(s):
. Tyson Nottingham reported problem
https://gitlab.com/procps-ng/procps/-/issues/245
. Jun, 2018 - visible row 1 tasks first addressed
commit 6aedeac667
. Jun, 2018 - adressed edge case, new bugs created
commit 9d59ddc466
. Sep, 2018 - additional edge case addressed
commit 59f02f19c7
. May, 2021 - some abends fixed, new error created
commit 8281ac4f98
. Jun, 2021 - try to prorect against future errors
commit 2ea082b4af
. Sep, 2021 - integrate mkVIZ & 'focused' tasks
commit 69978e3650
Discovered by: Tyson Nottingham
Signed-off-by: Jim Warner <james.warner@comcast.net>
Use of the the '.B' and '.BI' man documentation macros
had rendered the three library API pages less readable
than they could be. In addition, sometimes the pointer
indicator and an identifier were separated by a space.
So, this commit will trade those macros for some '.RI'
and '.RB' macros plus treat the pointers consistently.
[ plus we no longer italicize sort 'stacks' brackets ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
If procps is built on a Linux 5.3+ system then pidwait
is built with pidfd_open(). If that program is run on
a system < 5.3 then it gives an odd generic error.
If we get a ENOSYS from one pid, we will get it for all
the others so its better to explain what happens and terminate.
The man page is updated to note this issue.
This came up due to killall in psmisc using pidfd_send_signal
References:
https://bugs.debian.org/1015228
Signed-off-by: Craig Small <csmall@dropbear.xyz>
Using localtime() can be a problem due to the static buffer for
the return value. It's simple enough to use localtime_r()
Signed-off-by: Craig Small <csmall@dropbear.xyz>
If we're deleting a character or operating in overtype
mode, we must account for the potential of 'invisible'
characters. When one follows any character about to be
deleted or replaced both multi-byte sequences must go.
Without this change, there exists the possibility that
top might report some error where no error is apparent
to the user. For example, with 'other filtering' (o/O)
the user could see "unrecognized field name 'COMMAND'"
where the quoted column name appears perfectly normal.
Or maybe a sequences like the 'combining acute accent'
gets applied to an existing character instead of being
deleted as one expects when its parent was eliminated.
So, henceforth whenever any character is being deleted
we will now check for a following 'invisible' sequence
then eliminate it along with that preceding character.
[ admittedly, these scenarios are very rare yet they ]
[ may occur, especially when recalling some previous ]
[ multi-byte strings for editing. and, since we will ]
[ be interacting with a user, performance won't be a ]
[ factor so extra checks for a zero wcwidth is fine. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just provides the final protection against
possible screen corruption when processing line input.
[ such corruption was limited to the input line only ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the library change calculating 'MEMINFO_MEM_USED'
top must be tweaked in order to retain the distinction
between non-cached used memory and cached used memory.
[ assuming one of the two graphs are being displayed ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Some kdeinit tasks have a large environment consisting
mostly of nulls which were then followed by one or two
printable characters. Such strange environments should
not be shown with that 'not applicable' (n/a) notation
even though that first string vector is equal to '\0'.
I thought I had covered such a contingency but, due to
a misplaced right parenthesis, that '^N' bottom window
could see 'n/a' + a bunch of spaces + printable stuff.
Well, that won't happen anymore with this tiny change.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This program was well equipped to properly handle utf8
multi-byte characters - except for one important area!
If users typed any unicode character (shift+ctrl+u) or
pasted a utf-8 multi-byte string as a response to some
input prompt, those characters would simply be ignored
since they would not pass the internal 'isprint' test.
Well, now we can handle such data while preserving all
line editing provisions such as insertions, deletions,
destructive backspace, prior line recall (up/down) and
those all important cursor left plus right arrow keys.
[ we even support overtype mode for multi-byte stuff ]
[ even though our gui emulator will not let us alter ]
[ the cursor as confirmation (as we do at a console) ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Given that we won't always be able to alter the cursor
shapes (from underscore to block) if in input overtype
mode, this commit will at least provide a visual clue.
[ while this libvte quirk will impact gnome-terminal ]
[ and likely others, we're able to change the cursor ]
[ shape from underscore to block at a linux console. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the commit shown below the bottom window was forced
off if a full screen replacement function was invoked.
It did so by setting Frames_signal after calling those
routines from the keys_global function. However, there
was sometimes a possibility such action was premature.
At least two of those full screen replacement routines
may issue an error message & return without corrupting
the screen. As such, forcing off that bottom window is
totally unnecessary. It therefore should be preserved.
So this commit just moves the setting of Frames_signal
to the full screen replacement routines when possible.
Reference(s):
. May, 2022 - bottom window forced off for some
commit d66c1f39b5
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ along the way, we'll fix-up the section 4 commands ]
[ summary which has gotten a little outdated lately. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Messages issued by top will be displayed for only 1.25
seconds. And while this length of time would appear to
be acceptable (given the absence of complaints), there
will be times when a specific message might be missed.
So, this commit offers users the opportunity to recall
up to 10 of the most recent messages that were issued.
[ we'll just exploit top's new bottom window feature ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
During the changes to procps_loadavg I didn't set the initial
value for retval, meaning it was a random number.
It is now correctly intialised to zero.
References:
commit 8fcd14de18
Now that the library correctly returns an error if loadavg
is not available, tload can tell the user the bad news.
References:
procps-ng/procps#227
commit 8fcd14de18
Signed-off-by: Craig Small <csmall@dropbear.xyz>
A library should generally return an error value, rather than
printing to stderr a message. procps_loadavg() had a few things
to change:
It had a global buffer, but we don't call this function over and
over except in tload. It also did had two macros where a plain
fopen() would do the job nicely.
This removed the macro FILE_TO_BUF which was used everywhere in oldlib
but only for loadavg in newlib.
This library change will set us up to fix tload.
When /proc is mounted with subset=pid free just gives the
standard cannot create meminfo structure without any hint why.
free now checks the return value and if it is -ENOENT then it
gives more information about the problem.
References:
procps-ng/procps#227
Signed-off-by: Craig Small <csmall@dropbear.xyz>
Make the vmstat_read_failed() return non-error for Cygwin as
it always will error because /proc/vmstat doesn't exist.
Patch from Achim of the Cygwin project.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
Now that a potential use of that bottom 'window' for a
menu has been demonstrated, we'll remove such clutter.
[ after all, the prior commit cautioned against text ]
[ made conditional which might also be translatable. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
While it is acceptable to make text usage conditional,
one must never make the text itself conditional. After
all, the translators must be presented with all of the
text so the opportunity to translate it is never lost.
[ one wonders who the idiot was that did this anyway ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Fix some errors introduced in the commits shown below.
Reference(s):
. Apr, 2022 - 'keys_global' missed redundancy
commit 27f5904edd
. Apr, 2022 - added extraneous comma in help text
commit fb32021eeb
Signed-off-by: Jim Warner <james.warner@comcast.net>
If the special bottom 'window' routines remain unaware
of potential multi-byte characters, that heading could
be truncated prematurely and unnecessary blank line(s)
added to the reserved rows at the bottom of a display.
So, in both cases, this patch will now account for any
difference between string lengths and display columns.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch attempts to reduce the proliferation of the
bottom window support routines by combining the 'misc'
with 'item' functions. Along the way we can now rename
those two 'pick' functions 'menu' while keeping proper
alphabetic order among all the bottom window routines.
Signed-off-by: Jim Warner <james.warner@comcast.net>
pkg-config is used to find various libraries used by procps.
Unfortunately it, or rather automake, give terrible misleading
error messages if pkg-config is not installed.
At ./configure time you get this:
configure: error: ncurses support missing/incomplete (for partial
build use --without-ncurses)
At automake time you get this:
configure.ac:33: error: possibly undefined macro: AC_MSG_ERROR
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:48: error: possibly undefined macro: AS_IF
configure.ac:113: error: possibly undefined macro: AC_DEFINE
The internet is filled with such wonderful other examples.
This commit does two things:
At autoconf time, check PKG_PREREQ macro is defined which is found in
pkg.m4 and tells us pkg-config has its macros available.
At configure time, check the result of the pkg-config test and error
if it didn't find it.
Now it actually says its missing pkg-config. To be fair, the autoconf
check is "documented" and recommended in pkg.m4 file.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
The existing build system would only require wide ncurses for
a wide watch and even if the library was there would not link
anything else to it.
The first issue which #123 made me think of, is if ncursesw
was there and ncurses is not, why not use ncursesw?
A more major issue is if programs such as slabtop are linked
to ncurses, then certain languages will display their text
wrong, as found in #237.
The days of assuming ASCII only is ok are over the build system
now does the following:
1. If ncursesw is available use this for all relevant programs
2. If ncursesw is not but ncurses is, use this instead
3. If you enable 8bit watch and either disable ncurses or
we cannot find ncursesw error at configure time.
In related news, I hate M4sh.
References:
procps-ng/procps#123procps-ng/procps#237
Signed-off-by: Craig Small <csmall@dropbear.xyz>
Reference(s):
proc/uptime.c:191:9: warning: variable 'uphours' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Really, extend shift+tab navigation to only some linux
consoles (or maybe most consoles). However, there were
some consoles where shift+tab always yields just '\t'.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since top now uses string vectors for two items in the
new focus window (cmdline & environ), there is no real
use for that 'separator' specified at toggle time. So,
this commit will find a new use for what is the space.
Henceforth, when a user is navigating using the tab or
backtab keys, should a strv element with focus contain
embedded space(s), it will be emphasized & highlighted
using the current window's message color (capclr_msg).
Signed-off-by: Jim Warner <james.warner@comcast.net>
A commit that changes no code but, hopefully, helps to
better document where and how such literals were used.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit adds a new option called `--equexit` which is the opposite
of `--chgexit`. This option makes it possible to exit when the output
of the given command does not change for the given number of cycles.
A download operation could be given as a use-case since `watch` will
exit when the output does not change anymore, in other words, when
the download is completed.
References:
procps-ng/procps#232
Signed-off-by: Orhun Parmaksız <orhunparmaksiz@gmail.com>
Merge request 154 brought up the issue of the space before the commar
after sigaction, however the MR included the translated generated
pages.
References:
procps-ng/procps!154
Signed-off-by: Craig Small <csmall@dropbear.xyz>
Craig Small
Jim Warner
Orhun Parmaksız