Given that we won't always be able to alter the cursor
shapes (from underscore to block) if in input overtype
mode, this commit will at least provide a visual clue.
[ while this libvte quirk will impact gnome-terminal ]
[ and likely others, we're able to change the cursor ]
[ shape from underscore to block at a linux console. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the commit shown below the bottom window was forced
off if a full screen replacement function was invoked.
It did so by setting Frames_signal after calling those
routines from the keys_global function. However, there
was sometimes a possibility such action was premature.
At least two of those full screen replacement routines
may issue an error message & return without corrupting
the screen. As such, forcing off that bottom window is
totally unnecessary. It therefore should be preserved.
So this commit just moves the setting of Frames_signal
to the full screen replacement routines when possible.
Reference(s):
. May, 2022 - bottom window forced off for some
commit d66c1f39b5
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ along the way, we'll fix-up the section 4 commands ]
[ summary which has gotten a little outdated lately. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Messages issued by top will be displayed for only 1.25
seconds. And while this length of time would appear to
be acceptable (given the absence of complaints), there
will be times when a specific message might be missed.
So, this commit offers users the opportunity to recall
up to 10 of the most recent messages that were issued.
[ we'll just exploit top's new bottom window feature ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Now that a potential use of that bottom 'window' for a
menu has been demonstrated, we'll remove such clutter.
[ after all, the prior commit cautioned against text ]
[ made conditional which might also be translatable. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
While it is acceptable to make text usage conditional,
one must never make the text itself conditional. After
all, the translators must be presented with all of the
text so the opportunity to translate it is never lost.
[ one wonders who the idiot was that did this anyway ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Fix some errors introduced in the commits shown below.
Reference(s):
. Apr, 2022 - 'keys_global' missed redundancy
commit 27f5904edd
. Apr, 2022 - added extraneous comma in help text
commit fb32021eeb
Signed-off-by: Jim Warner <james.warner@comcast.net>
If the special bottom 'window' routines remain unaware
of potential multi-byte characters, that heading could
be truncated prematurely and unnecessary blank line(s)
added to the reserved rows at the bottom of a display.
So, in both cases, this patch will now account for any
difference between string lengths and display columns.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch attempts to reduce the proliferation of the
bottom window support routines by combining the 'misc'
with 'item' functions. Along the way we can now rename
those two 'pick' functions 'menu' while keeping proper
alphabetic order among all the bottom window routines.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Really, extend shift+tab navigation to only some linux
consoles (or maybe most consoles). However, there were
some consoles where shift+tab always yields just '\t'.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since top now uses string vectors for two items in the
new focus window (cmdline & environ), there is no real
use for that 'separator' specified at toggle time. So,
this commit will find a new use for what is the space.
Henceforth, when a user is navigating using the tab or
backtab keys, should a strv element with focus contain
embedded space(s), it will be emphasized & highlighted
using the current window's message color (capclr_msg).
Signed-off-by: Jim Warner <james.warner@comcast.net>
A commit that changes no code but, hopefully, helps to
better document where and how such literals were used.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just brings that 'bot_focus_strv' function
up to the same standard as the vanilla 'bot_focus_str'
guy. Namely, if there is no cmdline or environ for any
process, that bottom window will now display an 'n/a'.
[ with the nature of those string vectors, it wasn't ]
[ the same simple process found for regular strings. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Some of those bottom windows grow quite large, as with
the firefox environment. If one is navigating the data
using the tab key, it can be very inconvenient when an
element should be reexamined but that focus has moved.
Therefore, this commit will support the 'back_tab' key
which is a standard combination of the shift+tab keys.
Now a user can easily backup up to any missed element,
assuming a terminal emulator honors that terminfo key.
[ a gui emulator typically will honor the 'back_tab' ]
[ terminfo string, whereas a linux console does not. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Using 'mempcpy' was a mistake where plain old 'memcpy'
was appropriate. More importantly, the careless length
specified resulted in a SEGV under some circumstances.
[ namely, it occurred under a multi-threaded top and ]
[ the top program itself as focus + CtrlN 'environ'. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
After satisfying increased buffer size in the previous
patch, I decided to improve the highlight accuracy for
both the command lines plus the environment variables.
Since they both may contain elements which themselves
include embedded spaces, to accomplish this goal, one
must trade vanilla strings for string vectors instead.
[ at last such library items have now been justified ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
As it turns out, some of the 'environ' strings are big
enough to overrun the initial buffer sizes. And, while
no real harm was done (other than to silently truncate
the output), this patch will increase the buffer size.
While we're at it. we will normalize a few more buffer
declarations along with correcting a couple typos too.
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ and along the way, those 2 newest namespace fields ]
[ are now mentioned under that same 'X' command part ]
[ this commit already changed for improved response. ]
[ they should have been included in the patch below. ]
Reference(s):
commit 6e78355d4d
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ along the way we will restore '^R' to keys summary ]
[ plus correct a leftover reference to 'Ctrl-V' too. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit adds a prototype for a potential extension
of that tabbed bottom window capability. It introduces
a 'menu' which then provides for users' selections. It
does not actually do anything meaningful and will only
be enabled with the new #define called 'BOT_PICK_YES'.
[ since it's just a proof of concept, no attempt has ]
[ been made to add the usual NLS translation support ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit introduces the 'tab' key which can be used
to highlight individual elements in that bottom 'Ctrl'
window. This can really help when reviewing such data.
[ note, normal ongoing monitoring continues unabated ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit adds support for displaying the namespaces
in top's separate bottom 'Ctrl' window. Along the way,
the plumbing is now in place to extend this capability
to other data (if we don't run out of '^' keystrokes).
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will just set the stage for the next commit
where we'll be adding the capability to display things
that sometimes may necessitate multiple library items.
In that effort we will be adding several new routines.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In that commit shown below, the concept of a corrupted
display was introduced so that 'Ctrl' windows could be
redrawn now that they were made more persistent. Well,
it turns out there is another case where redrawing was
necessary. That is when transitioning between task and
thread modes. So this patch addresses those occasions.
Reference(s):
. May, 2022 - introduced Frames_signal BREAK_screen
commit d66c1f39b5
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the patch referenced below the bottom 'Ctrl' window
was made to remain until it was dismissed by the user.
As such, it required abandoning a 'Cap_nl_clreos' used
when all the terminal rows had not been drawn. Instead
each line had to be cleared individually until the row
reserved for that 'Ctrl' window area had been reached.
Unfortunately, while a 'Cap_nl_clreos' didn't create a
problem for 'batch' mode, a 'Cap_clr_eol' used instead
yielded an unending loop if those rows were limitless.
So, now we will only clear that area when top isn't in
'batch' mode (which should have always been the case).
Reference(s):
. May, 2022 - bottom window made sticky
commit 0f2a755b0b
Signed-off-by: Jim Warner <james.warner@comcast.net>
Well darn it, whoever wrote that new library caught me
with my pants down (again?). Shoot, they were not just
down but somehow missing altogether. Here's the story.
Any item from that library supported by dynamic memory
can only be represented in user's stacks exactly once.
Should any string based enumerator be duplicated among
the items array, for any instance beyond the first the
library will return '[ duplicate ENUM ]' for a result.
That's where I lost my pants. While command lines were
given special handling (and never duplicated) I failed
to turn on CGROUPS, SUPGRPS & ENVIRON when testing the
Ctrl-G, Ctrl-U & Ctrl-N keys. If any of those 3 are on
that's when a Ctrl window sees a 'duplicate' notation.
[ and who runs top with such fields displayed anyway ]
In responding to this oops, the internals were changed
quite dramatically & vastly simplified in the process.
More importantly, the 'duplicate' results are no more.
Signed-off-by: Jim Warner <james.warner@comcast.net>
To complete the implementation of this new feature, we
must address the problem created by any commands which
offer their own full replacement displays. Should that
'Ctrl' bottom window be active, a return from any such
command leaves that lower portion of a terminal blank.
While we could issue a 'TAGGED_TOSS' macro right after
invoking any of those 4 (currently) affected commands,
it is wrong to make them aware of this 'tagged' stuff.
So, I'll opt for a more generalized solution whereby a
notice regarding a corrupted screen is broadcast. Then
the logic already aware of 'tagging' can deal with it.
Signed-off-by: Jim Warner <james.warner@comcast.net>
After making that new bottom window more persistent, I
decided to offer a build choice for somebody who might
prefer to have the rug pulled out from under him while
reviewing window contents should some target task end.
If 'TAGGED_BRIEF' is defined old behavior is restored.
[ it should be noted, however, that when this define ]
[ is active we'll lose any benefit of onetime update ]
[ for the bottom window. just like with the original ]
[ behavior, it is repainted with every update cycle. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
I grew tired of inadvertently causing a premature exit
from top when all I wanted was to review some process'
environment variables. That 'V' key was just too close
to the 'C' key so the '^V' attempt became one of '^C'.
Well, not any more. Should a user wish to see a task's
environment, it will now require the '^N' combination.
[ it also now places G/U & N/K on a similar diagonal ]
Along the way, lower case Ctrl key combinations on the
help screen were all changed into upper case versions.
Signed-off-by: Jim Warner <james.warner@comcast.net>
After using this new feature for awhile, I encountered
numerous times when that 'Ctrl' window would disappear
as I was studying the contents. This was caused by the
death of the target task but it made me think that the
window could/should persist until dismissed by a user.
Well, now it will persist until that same Ctrl key has
been struck a 2nd time or a different Ctrl key used to
target another process after positioning it on row #1.
So now, instead of that former 'moving target' type of
approach, this window is more of a 'snapshot' in time.
[ even more significant, perhaps, is the fact that a ]
[ Ctrl window will now be drawn exactly 1 time only, ]
[ instead of being repainted after each delay cycle. ]
[ this will remain true no matter how many intervals ]
[ might elapse while its contents were under review. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This minor addition to that new 'Ctrl' feature is more
important than it seems. It's responsible for alerting
yours truly to the 'LIBPROC_HIDE_KERNEL' bug addressed
in the very next commit. All this while, program names
for some tasks would be mysteriously replaced with the
kernel 'kworker' names. However, customary clutter for
the top process display tended to obscure such a fact.
[ and, of course, to notice the problem in the first ]
[ place required one to have the command line toggle ]
[ 'off' or perhaps to toggle its state 'on' & 'off'. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
There are times when one might want to see some task's
particular variable width data. However, prior to this
commit, the only way was to first turn on a field then
scroll through it via repeated right arrow keystrokes.
[ this also required that field to be displayed last ]
Needless to say, given the potential length of some of
that variable data this could be extremely cumbersome.
Now with this patch, a Ctrl keystroke combination will
create a separate window at the bottom of the terminal
screen where such variable width data is seen in full.
[ the targeted task is the 1st task displayed, which ]
[ is a convention employed in some existing commands ]
[ the targeted data was determined by these Ctrl key ]
[ combinations: CtrlG = ctrl group; CtrlK = cmdline; ]
[ CtrlU = supplementary groups; plus CtrlV = environ ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When autogroups are active programs such as renice and
nice are basically useless because the nice value will
only affect the target task priority relative to other
processes in the same autogroup. So to accomplish what
we thought of as renice, /proc/<pid>/autogroup must be
changed. Altering a single member in an autogroup will
also affect every other member of that same autogroup.
Since top's renice provision ('r') suffers constraints
like those of the stand alone nice/renice programs, we
will now provide a means to manipulate that nice value
found within some process' /proc/<pid>/autogroup file.
[ to alter this file for other user's tasks requires ]
[ root privileges, as does setting a negative value. ]
[ however, unlike that 'r' command, this new command ]
[ allows raising *and* lowering all positive values. ]
Reference(s):
. Aug 2021, autogroups added to librady
commit 631e5d91f3
. Aug 2021, autogroups added to top
commit b789b46f84
Signed-off-by: Jim Warner <james.warner@comcast.net>
On occasion, even as the top author, I wonder why that
'x' toggle has stopped working. Of course, it actually
was working but a locate request ('L') or other filter
('O') operation was active and thus temporarily turned
if off. Such behavior is documented in top's man page.
Well, with this patch that 'x' suppression is no more.
[ the original justification, however, remains true. ]
[ but there's really only one character which causes ]
[ any potential trouble & i'm gonna' keep it secret. ]
[ besides, if a display is corrupted, there's always ]
[ that '=' key which restores things back to normal. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
It would appear that openSUSE was the first to release
procps-ng version 4.0.0 (in the tumbleweed distro). As
a result I checked their source rpm and found a couple
of patches I'm porting to newlib for the next release.
This particulate patch, with some changes, is openSUSE
patch 'procps-ng-3.3.10-large_pcpu.patch'. The changes
were strictly cosmetic. They involved whitespace only.
[ it should be noted that the net effect for raising ]
[ the maximum is to produce a '?' in the %CPU field. ]
[ that's because its width is fixed at five columns. ]
[ but at least the '?' won't distort actual results. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
It would appear that openSUSE was the first to release
procps-ng version 4.0.0 (in the tumbleweed distro). As
a result I checked their source rpm and found a couple
of patches I'm porting to newlib for the next release.
This particulate commit was a refactor of the openSUSE
patch 'procps-ng-3.3.8-bnc634840.patch'. Unfortunately
their original patch did not have the intended effect.
That was because the amended signal handling logic was
performed well before the command line parameters were
parsed. So the global 'Batch' flag was in its 0 state.
. what follows is the original openSUSE commit message
------------------------------------------------------
Do not setup SIGHUP signal handler if we are in the batch mode
Top enables a signal handler for the SIGHUP signal (loss of terminal). While
this makes sense for top's default interactive mode, it doesn't make any sense
for batch mode. If you run top in nohup just to collect data over time and
disconnect top finishes which is not what one would expect.
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
When top's rcfile was reorganized, trading that 'char'
based field representation for the 'int' scheme, there
was a function prologue that should have been changed.
Thus, this patch will correct that original oversight.
Reference(s):
. Mar, 2022 - rcfile reorganized
commit 46aa96e438
Signed-off-by: Jim Warner <james.warner@comcast.net>
When we transitioned from 'char' based fields to 'int'
proper initial cursor positioning (highlight) was lost
in the 'fields_utility' function. The highlight should
appear on the current sort field. Instead, however, it
was often positioned on the first field listed or some
completely different field other than that sort field.
So this patch will restore the master branch behavior.
[ and on the assumption that a sort field is visible ]
[ we will search first for a field with the 'on' bit ]
Reference(s):
. Mar, 2022 - trade 'char' for 'int'
commit 46aa96e438
Signed-off-by: Jim Warner <james.warner@comcast.net>
At this point I don't know if the Rc.id ever carried a
value of 'b', 'c', 'd' or 'e' in a public release. But
I do know that those values ought not to be recognized
in any configuration file. Now they won't be for sure.
[ the net result is that now a user with such a file ]
[ will see the 'incompatible rcfile' message instead ]
[ of that misleading 'window entry corrupt' message. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
