This patch fixes a nearly decade old bug discovered by
Frederik Deweerdt. His merge request shown below would
be an adequate solution except for iterative overhead.
This alternate patch will represent substantially less
overhead for an admittedly extremely rare possibility.
Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/114
And-thanks-to: Frederik Deweerdt <fdeweerdt@fastly.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
Reverted the translation hint as the fields are used for both
normal and wide modes, so need to fit the smaller of the two.
Added NEWS item
References:
commit 01c1b2345e
Based on the command line option, use 'sigqueue'
instead of 'kill' to pass the integer value with
the signal.
References:
procps-ng/procps!32
Signed-off-by: Craig Small <csmall@dropbear.xyz>
The Debian bug referenced below has nothing to do with
locales. In fact, top was made locale independent back
in release 3.3.13 (April, 2018). However, that bug did
reveal some misplaced logic which this patch corrects.
Prompted by the Qualys audit, all rcfile field strings
were checked for potential duplicates which could only
have resulted from some user's manual/malicious edits.
Unfortunately, that code was executed before top had a
chance to enforce the proper/maximum string length (in
the event an extremely old rcfile had just been read).
This created some potential string overrun references.
In top's original 3.3.15 implementation, the potential
overrun extended for 15 characters. That is the number
of field characters added with 3.3.9 (December, 2013).
But, since strchr() was used, no error exit was taken.
In the revised 3.3.16 implementation, the strchr() was
replaced with '&w->rc.fieldscur[n]'. This held overrun
to a single position while producing an error message.
So, this commit just moves that logic to a point where
fieldscur is guaranteed to be longer than EU_MAXPFLGS.
Reference(s):
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=951335
. revised 3.3.16 validation logic
commit 291d98ee50
. original 3.3.15 validation logic
commit fdb58974e2
Signed-off-by: Jim Warner <james.warner@comcast.net>
Previous release incremented the age instead of incrementing the
revision. The age can only increment if revision (internal changes
only) or current (API changes) also increments.
A C:R:A of 8.0.2 means its the latest revision of 8.0 library and
any binary linked against 8.0 will work. This is our third revision
of the 8.0 library.
References:
https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
@MarsChan correctly pointed out that the read() always returns 128
bytes, so skipping on >= 128 will always mean we skip. Their suggestion
was to remove the equality, but read will never go past 128 bytes so
I just removed that part of the check.
References:
procps-ng/procps!89
A recent issue (and merge request) reminded me of gaps
in top's alternate 'vim' navigation keys support. Some
xterm emulators do not pass the customary strings when
keys were used with the <Ctrl> and/or <Alt> modifiers.
While it was a known problem, this issue/merge request
prompted research into the root cause. As it turns out
the problem is traceable to an X resource known by the
name 'eightBitInput'. When 'true' (the default), a key
pressed in combination with <Alt> will not be preceded
by the <Esc> character. Rather, a single character was
presented (modified via an 'eightBitMeta' X resource).
The following approaches would eliminate this problem:
. start xterm thus: xterm -xrm '*eightBitInput: false'
. use: ~/.Xresources with 'Xterm*eightBitInput: false'
. build xterm with 'configure --enable-meta-sends-esc'
( apparently used for CentOS, Fedora, openSUSE, etc. )
. enable xterm's menu via 'configure --enable-toolbar'
( so the user can set the 'Meta Sends Escape' option )
Of course, none of the above steps is desirable from a
user's perspective. So, this patch will add additional
entries to the iokey function's tinfo_tab to represent
strings passed when the <Alt> key does not send <Esc>.
[ hopefully they'll be the same across all platforms ]
Lastly, this patch will also eliminate those redundant
<Atl> + '\', '/', '<' & '>' provisions, which now seem
like overkill and suffer from that same 'eightBitMeta'
xterm problem. And we might as well say goodbye to the
4 '<Alt> + arrow key' table entries (which do not seem
to currently work with any emulator which I can find).
[ what in the world was I thinking way back in 2011? ]
Reference(s):
. issue
https://gitlab.com/procps-ng/procps/issues/135
. merge request
https://gitlab.com/procps-ng/procps/merge_requests/84
Signed-off-by: Jim Warner <james.warner@comcast.net>
Previous versions of ps used to only match on the first 15 characters
because that's what the kernel used to provide. Newer kernels have a
longer length for this field so procps has been updated to suit.
References:
procps-ng/procps#101https://bugzilla.suse.com/show_bug.cgi?id=1099091
With the Qualys security audit, we began to harden our
treatment of the top rcfile. In particular, the values
read were checked so as to prevent some malicious user
from editing it in order to achieve an evil objective.
However when it came to colors I was surprised to find
that at least one user edited the rcfile for 256-color
support. Unfortunately, our new checks prevented this.
So this commit will provide the means to exploit those
extra colors with no need to manually edit the rcfile.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/96
Signed-off-by: Jim Warner <james.warner@comcast.net>
The free manpage used the correct unit names (e.g. membibyte) but the
incorrect unit (e.g. M ) for the human-readable option.
References:
https://bugs.debian.org/898774
Signed-off-by: Craig Small <csmall@enc.com.au>
The library now presents command names up to 64 characters, in line with
the kernel changes. ps command name selection (the -C option) now also
is 64 characters long.
References:
commit 2cfdbbe897
As comm length can be longer than 15 characters with newer kernels, it
doesn't make sense to have a warning when you make the match string
longer than this.
As a side-effect, it removes the false-positive you got when you used
long regex matches (see issue #92 )
References:
commit 2cfdbbe897procps-ng/procps#92
sig.c had this odd logic where on non-Hurd systems it would undefine
SIGLOST. Fine for Hurd or amd64 Linux systems. Bad for a sparc which
has SIGLOST defined *and* is not Hurd.
Just check its defined, its much simpler.
If pgrep is run with a non-program name match and there are
no matches, it segfaults.
The testsuite thinks zero bytes sent, and zero bytes sent
because the program crashed is the same :/
References:
commit 1aacf4af7fhttps://bugs.debian.org/894917
Signed-off-by: Craig Small <csmall@enc.com.au>
Update NEWS with the version
Add library API change into NEWS
Update c:r:a for library to 7:0:1
This means the current and age are incremented, so old programs can
use new library but not vice-versa as they won't have the numa*
functions.
The previous commit had one minor bug in it because the fields need
to be alphabetical and times comes after timeout.
Added NEWS item for this feature
Added another testsuite check for new flags in case they
disappear or go strange one day.
References:
commit 8a94ed6111
The previous two patches updated free, but needed a tweak and the tests
also needed to be updated. I've hand-calculated the results using bc and
both the testsuite and bc results equal what free prints out.
References:
commit 9365be7633procps-ng/procps#45
The commit referenced below put a setvbuf() before checking what
fopen() returned. If the file could not be opened then the file
handle was NULL at setvbuf() crashed.
setvbuf() is now called after checking what fopen() returns and only
when it was successful.
References:
procps-ng/procps#76
commit 58ae084c27
Those references below offer more detail regarding the
default startup changes beginning with version 3.3.10.
It is important to remember that all such changes were
supposed to impact only new users or users who had not
saved the personal config file (via that 'W' command).
However, I introduced a bug wherein the rcfile was not
fully honored. This gave the changes a bad reputation.
That bug was corrected in release 3.3.11 but the issue
of default startup options keeps resurfacing. And it's
clear there's no consensus on what should be included.
Our --disable-modern-top configure option is of little
help since it remains an all-or-nothing approach. What
we need is an answer offering unlimited customization.
So, this commit will provide distribution packagers or
system administrators with a much more flexible way to
set their own preferred startup default configuration.
A new rcfile is being introduced: '/etc/topdefaultrc',
whose format/content is the same as a personal rcfile.
Thus once a 'proper' enterprise configuration has been
established and saved via 'W', it can be copied to the
/etc/ directory. Thereafter, startup in the absence of
a saved rcfile will use that configuration as default.
Now if a distribution packager or system administrator
wishes to expose their users to some of top's advanced
capabilities they can do so gradually. Perhaps setting
up graph mode for summary area task and memory display
while retaining the %CPU sort could be tried. Or maybe
showing colors, but better customized for a particular
terminal emulator. Such possibilities are now endless.
[ in exploiting this new capability, i hope that the ]
[ other windows (alt display mode) aren't overlooked ]
Reference(s):
. Sep, 2014 - Not fully honoring rcfile bug discussed
https://www.freelists.org/post/procps/top-saved-rcfile-bug
. Oct, 2014 - Attempt to defend new startup defaults
https://bugzilla.redhat.com/show_bug.cgi?id=1153049
. Jul, 2015 - Forest vs. %CPU views discussion
https://gitlab.com/procps-ng/procps/issues/6
. Oct, 2017 - Question the use of --disable-modern-top
https://bugzilla.redhat.com/show_bug.cgi?id=1499410
. Oct, 2017 - Forest vs. %CPU views discussion again
https://www.freelists.org/post/procps/Forest-mode-by-default-in-top-seems-a-bit-strange
. Dec, 2017 - Rehash of 3.3.10 startup defaults change
https://gitlab.com/procps-ng/procps/issues/78
Signed-off-by: Jim Warner <james.warner@comcast.net>
