shadow/lib/subordinateio.c

1106 lines
25 KiB
C
Raw Normal View History

/*
* SPDX-FileCopyrightText: 2012 - Eric Biederman
*/
#include <config.h>
#ifdef ENABLE_SUBIDS
#include "prototypes.h"
#include "defines.h"
#include <stdio.h>
#include "commonio.h"
#include "subordinateio.h"
#include "../libsubid/subid.h"
#include <sys/types.h>
#include <pwd.h>
#include <ctype.h>
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
#include <fcntl.h>
#include "alloc.h"
#define ID_SIZE 31
/*
* subordinate_dup: create a duplicate range
*
* @ent: a pointer to a subordinate_range struct
*
* Returns a pointer to a newly allocated duplicate subordinate_range struct
* or NULL on failure
*/
static /*@null@*/ /*@only@*/void *subordinate_dup (const void *ent)
{
const struct subordinate_range *rangeent = ent;
struct subordinate_range *range;
range = MALLOC (struct subordinate_range);
if (NULL == range) {
return NULL;
}
range->owner = strdup (rangeent->owner);
if (NULL == range->owner) {
free(range);
return NULL;
}
range->start = rangeent->start;
range->count = rangeent->count;
return range;
}
/*
* subordinate_free: free a subordinate_range struct
*
* @ent: pointer to a subordinate_range struct to free.
*/
static void subordinate_free (/*@out@*/ /*@only@*/void *ent)
{
struct subordinate_range *rangeent = ent;
2021-08-18 23:36:02 +05:30
free ((void *)(rangeent->owner));
free (rangeent);
}
/*
* subordinate_parse:
*
* @line: a line to parse
*
* Returns a pointer to a subordinate_range struct representing the values
* in @line, or NULL on failure. Note that the returned value should not
* be freed by the caller.
*/
static void *subordinate_parse (const char *line)
{
static struct subordinate_range range;
static char rangebuf[1024];
int i;
char *cp;
char *fields[SUBID_NFIELDS];
/*
* Copy the string to a temporary buffer so the substrings can
* be modified to be NULL terminated.
*/
if (strlen (line) >= sizeof rangebuf)
return NULL; /* fail if too long */
strcpy (rangebuf, line);
/*
* Save a pointer to the start of each colon separated
* field. The fields are converted into NUL terminated strings.
*/
for (cp = rangebuf, i = 0; (i < SUBID_NFIELDS) && (NULL != cp); i++) {
fields[i] = cp;
while (('\0' != *cp) && (':' != *cp)) {
cp++;
}
if ('\0' != *cp) {
*cp = '\0';
cp++;
} else {
cp = NULL;
}
}
/*
* There must be exactly SUBID_NFIELDS colon separated fields or
* the entry is invalid. Also, fields must be non-blank.
*/
if (i != SUBID_NFIELDS || *fields[0] == '\0' || *fields[1] == '\0' || *fields[2] == '\0')
return NULL;
range.owner = fields[0];
if (getulong (fields[1], &range.start) == 0)
return NULL;
if (getulong (fields[2], &range.count) == 0)
return NULL;
return &range;
}
/*
* subordinate_put: print a subordinate_range value to a file
*
* @ent: a pointer to a subordinate_range struct to print out.
* @file: file to which to print.
*
* Returns 0 on success, -1 on error.
*/
static int subordinate_put (const void *ent, FILE * file)
{
const struct subordinate_range *range = ent;
return fprintf(file, "%s:%lu:%lu\n",
range->owner,
range->start,
range->count) < 0 ? -1 : 0;
}
static struct commonio_ops subordinate_ops = {
subordinate_dup, /* dup */
subordinate_free, /* free */
NULL, /* getname */
subordinate_parse, /* parse */
subordinate_put, /* put */
fgets, /* fgets */
fputs, /* fputs */
NULL, /* open_hook */
NULL, /* close_hook */
};
/*
* range_exists: Check whether @owner owns any ranges
*
* @db: database to query
* @owner: owner being queried
*
* Returns true if @owner owns any subuid ranges, false otherwise.
*/
static bool range_exists(struct commonio_db *db, const char *owner)
{
const struct subordinate_range *range;
commonio_rewind(db);
while ((range = commonio_next(db)) != NULL) {
if (0 == strcmp(range->owner, owner))
return true;
}
return false;
}
/*
* find_range: find a range which @owner is authorized to use which includes
* subuid @val.
*
* @db: database to query
2017-10-23 02:35:52 +05:30
* @owner: owning uid being queried
* @val: subuid being searched for.
*
* Returns a range of subuids belonging to @owner and including the subuid
* @val, or NULL if no such range exists.
*/
static const struct subordinate_range *find_range(struct commonio_db *db,
const char *owner, unsigned long val)
{
const struct subordinate_range *range;
/*
* Search for exact username/group specification
*
* This is the original method - go fast through the db, doing only
* exact username/group string comparison. Therefore we leave it as-is
* for the time being, in order to keep it equally fast as it was
* before.
*/
commonio_rewind(db);
while ((range = commonio_next(db)) != NULL) {
unsigned long first = range->start;
unsigned long last = first + range->count - 1;
if (0 != strcmp(range->owner, owner))
continue;
if ((val >= first) && (val <= last))
return range;
}
/*
* We only do special handling for these two files
*/
if ((0 != strcmp(db->filename, "/etc/subuid")) && (0 != strcmp(db->filename, "/etc/subgid")))
return NULL;
/*
* Search loop above did not produce any result. Let's rerun it,
2017-10-23 02:03:00 +05:30
* but this time try to match actual UIDs. The first entry that
* matches is considered a success.
* (It may be specified as literal UID or as another username which
* has the same UID as the username we are looking for.)
*/
struct passwd *pwd;
uid_t owner_uid;
char owner_uid_string[33] = "";
/* Get UID of the username we are looking for */
pwd = getpwnam(owner);
if (NULL == pwd) {
2021-09-13 20:41:40 +05:30
/* Username not defined in /etc/passwd, or error occurred during lookup */
return NULL;
}
owner_uid = pwd->pw_uid;
sprintf(owner_uid_string, "%lu", (unsigned long int)owner_uid);
commonio_rewind(db);
while ((range = commonio_next(db)) != NULL) {
unsigned long first = range->start;
unsigned long last = first + range->count - 1;
/* For performance reasons check range before using getpwnam() */
if ((val < first) || (val > last)) {
continue;
}
/*
* Range matches. Check if range owner is specified
* as numeric UID and if it matches.
*/
if (0 == strcmp(range->owner, owner_uid_string)) {
return range;
}
/*
* Ok, this range owner is not specified as numeric UID
* we are looking for. It may be specified as another
* UID or as a literal username.
*
* If specified as another UID, the call to getpwnam()
* will return NULL.
*
* If specified as literal username, we will get its
* UID and compare that to UID we are looking for.
*/
const struct passwd *range_owner_pwd;
range_owner_pwd = getpwnam(range->owner);
if (NULL == range_owner_pwd) {
continue;
}
if (owner_uid == range_owner_pwd->pw_uid) {
return range;
}
}
return NULL;
}
/*
* have_range: check whether @owner is authorized to use the range
* (@start .. @start+@count-1).
* @db: database to check
* @owner: owning uid being queried
* @start: start of range
* @count: number of uids in range
*
* Returns true if @owner is authorized to use the range, false otherwise.
*/
static bool have_range(struct commonio_db *db,
const char *owner, unsigned long start, unsigned long count)
{
const struct subordinate_range *range;
unsigned long end;
if (count == 0)
return false;
end = start + count - 1;
range = find_range (db, owner, start);
while (range) {
2021-08-18 23:36:02 +05:30
unsigned long last;
last = range->start + range->count - 1;
if (last >= (start + count - 1))
return true;
count = end - last;
start = last + 1;
range = find_range(db, owner, start);
}
return false;
}
static bool append_range(struct subid_range **ranges, const struct subordinate_range *new, int n)
{
if (!*ranges) {
*ranges = MALLOC(struct subid_range);
if (!*ranges)
return false;
} else {
struct subid_range *alloced;
alloced = REALLOCARRAY(*ranges, n + 1, struct subid_range);
if (!alloced)
return false;
*ranges = alloced;
}
(*ranges)[n].start = new->start;
(*ranges)[n].count = new->count;
return true;
}
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
void free_subordinate_ranges(struct subordinate_range **ranges, int count)
{
int i;
if (!ranges)
return;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
for (i = 0; i < count; i++)
subordinate_free(ranges[i]);
free(ranges);
}
/*
* subordinate_range_cmp: compare uid ranges
*
* @p1: pointer to a commonio_entry struct to compare
* @p2: pointer to second commonio_entry struct to compare
*
* Returns 0 if the entries are the same. Otherwise return -1
* if the range in p1 is lower than that in p2, or (if the ranges are
* equal) if the owning uid in p1 is lower than p2's. Return 1 if p1's
* range or owning uid is great than p2's.
*/
static int subordinate_range_cmp (const void *p1, const void *p2)
{
struct subordinate_range *range1, *range2;
range1 = (*(struct commonio_entry **) p1)->eptr;
if (range1 == NULL)
return 1;
range2 = (*(struct commonio_entry **) p2)->eptr;
if (range2 == NULL)
return -1;
if (range1->start < range2->start)
return -1;
else if (range1->start > range2->start)
return 1;
else if (range1->count < range2->count)
return -1;
else if (range1->count > range2->count)
return 1;
else
return strcmp(range1->owner, range2->owner);
}
/*
* find_free_range: find an unused consecutive sequence of ids to allocate
* to a user.
* @db: database to search
* @min: the first uid in the range to find
* @max: the highest uid to find
* @count: the number of uids needed
*
* Return the lowest new uid, or ULONG_MAX on failure.
*/
static unsigned long find_free_range(struct commonio_db *db,
unsigned long min, unsigned long max,
unsigned long count)
{
const struct subordinate_range *range;
unsigned long low, high;
/* When given invalid parameters fail */
if ((count == 0) || (max < min))
goto fail;
/* Sort by range then by owner */
commonio_sort (db, subordinate_range_cmp);
commonio_rewind(db);
low = min;
while ((range = commonio_next(db)) != NULL) {
unsigned long first = range->start;
unsigned long last = first + range->count - 1;
/* Find the top end of the hole before this range */
high = first;
/* Don't allocate IDs after max (included) */
if (high > max + 1) {
high = max + 1;
}
/* Is the hole before this range large enough? */
if ((high > low) && ((high - low) >= count))
return low;
/* Compute the low end of the next hole */
if (low < (last + 1))
low = last + 1;
if (low > max)
goto fail;
}
/* Is the remaining unclaimed area large enough? */
if (((max - low) + 1) >= count)
return low;
fail:
return ULONG_MAX;
}
/*
* add_range: add a subuid range to an owning uid's list of authorized
* subuids.
* @db: database to which to add
* @owner: uid which owns the subuid
* @start: the first uid in the owned range
* @count: the number of uids in the range
*
2017-10-23 02:53:13 +05:30
* Return 1 if the range is already present or on success. On error
* return 0 and set errno appropriately.
*/
static int add_range(struct commonio_db *db,
const char *owner, unsigned long start, unsigned long count)
{
struct subordinate_range range;
range.owner = owner;
range.start = start;
range.count = count;
/* See if the range is already present */
if (have_range(db, owner, start, count))
return 1;
/* Otherwise append the range */
return commonio_append(db, &range);
}
/*
* remove_range: remove a range of subuids from an owning uid's list
* of authorized subuids.
* @db: database to work on
* @owner: owning uid whose range is being removed
* @start: start of the range to be removed
* @count: number of uids in the range.
*
* Returns 0 on failure, 1 on success. Failure means that we needed to
* create a new range to represent the new limits, and failed doing so.
*/
static int remove_range (struct commonio_db *db,
const char *owner,
unsigned long start, unsigned long count)
{
struct commonio_entry *ent;
unsigned long end;
if (count == 0) {
return 1;
}
end = start + count - 1;
for (ent = db->head; NULL != ent; ent = ent->next) {
struct subordinate_range *range = ent->eptr;
unsigned long first;
unsigned long last;
/* Skip unparsed entries */
if (NULL == range) {
continue;
}
first = range->start;
last = first + range->count - 1;
/* Skip entries with a different owner */
if (0 != strcmp (range->owner, owner)) {
continue;
}
/* Skip entries outside of the range to remove */
if ((end < first) || (start > last)) {
continue;
}
if (start <= first) {
if (end >= last) {
/* to be removed: [start, end]
* range: [first, last] */
/* entry completely contained in the
* range to remove */
commonio_del_entry (db, ent);
} else {
/* to be removed: [start, end]
* range: [first, last] */
/* Remove only the start of the entry */
range->start = end + 1;
range->count = (last - range->start) + 1;
ent->changed = true;
db->changed = true;
}
} else {
if (end >= last) {
/* to be removed: [start, end]
* range: [first, last] */
/* Remove only the end of the entry */
range->count = start - range->start;
ent->changed = true;
db->changed = true;
} else {
/* to be removed: [start, end]
* range: [first, last] */
/* Remove the middle of the range
* This requires to create a new range */
struct subordinate_range tail;
tail.owner = range->owner;
tail.start = end + 1;
tail.count = (last - tail.start) + 1;
if (commonio_append (db, &tail) == 0) {
return 0;
}
range->count = start - range->start;
ent->changed = true;
db->changed = true;
}
}
}
return 1;
}
static struct commonio_db subordinate_uid_db = {
"/etc/subuid", /* filename */
&subordinate_ops, /* ops */
NULL, /* fp */
#ifdef WITH_SELINUX
NULL, /* scontext */
#endif
2015-02-27 21:56:57 +05:30
0644, /* st_mode */
0, /* st_uid */
0, /* st_gid */
NULL, /* head */
NULL, /* tail */
NULL, /* cursor */
false, /* changed */
false, /* isopen */
false, /* locked */
false, /* readonly */
false /* setname */
};
int sub_uid_setdbname (const char *filename)
{
return commonio_setname (&subordinate_uid_db, filename);
}
/*@observer@*/const char *sub_uid_dbname (void)
{
return subordinate_uid_db.filename;
}
bool sub_uid_file_present (void)
{
return commonio_present (&subordinate_uid_db);
}
int sub_uid_lock (void)
{
return commonio_lock (&subordinate_uid_db);
}
int sub_uid_open (int mode)
{
return commonio_open (&subordinate_uid_db, mode);
}
bool local_sub_uid_assigned(const char *owner)
{
return range_exists (&subordinate_uid_db, owner);
}
bool have_sub_uids(const char *owner, uid_t start, unsigned long count)
{
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
struct subid_nss_ops *h;
bool found;
enum subid_status status;
h = get_subid_nss_handle();
if (h) {
status = h->has_range(owner, start, count, ID_TYPE_UID, &found);
if (status == SUBID_STATUS_SUCCESS && found)
return true;
return false;
}
return have_range (&subordinate_uid_db, owner, start, count);
}
int sub_uid_add (const char *owner, uid_t start, unsigned long count)
{
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (get_subid_nss_handle())
return -EOPNOTSUPP;
return add_range (&subordinate_uid_db, owner, start, count);
}
int sub_uid_remove (const char *owner, uid_t start, unsigned long count)
{
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (get_subid_nss_handle())
return -EOPNOTSUPP;
return remove_range (&subordinate_uid_db, owner, start, count);
}
int sub_uid_close (void)
{
return commonio_close (&subordinate_uid_db);
}
int sub_uid_unlock (void)
{
return commonio_unlock (&subordinate_uid_db);
}
uid_t sub_uid_find_free_range(uid_t min, uid_t max, unsigned long count)
{
unsigned long start;
start = find_free_range (&subordinate_uid_db, min, max, count);
return start == ULONG_MAX ? (uid_t) -1 : start;
}
static struct commonio_db subordinate_gid_db = {
"/etc/subgid", /* filename */
&subordinate_ops, /* ops */
NULL, /* fp */
#ifdef WITH_SELINUX
NULL, /* scontext */
#endif
2015-02-27 21:56:57 +05:30
0644, /* st_mode */
0, /* st_uid */
0, /* st_gid */
NULL, /* head */
NULL, /* tail */
NULL, /* cursor */
false, /* changed */
false, /* isopen */
false, /* locked */
false, /* readonly */
false /* setname */
};
int sub_gid_setdbname (const char *filename)
{
return commonio_setname (&subordinate_gid_db, filename);
}
/*@observer@*/const char *sub_gid_dbname (void)
{
return subordinate_gid_db.filename;
}
bool sub_gid_file_present (void)
{
return commonio_present (&subordinate_gid_db);
}
int sub_gid_lock (void)
{
return commonio_lock (&subordinate_gid_db);
}
int sub_gid_open (int mode)
{
return commonio_open (&subordinate_gid_db, mode);
}
bool have_sub_gids(const char *owner, gid_t start, unsigned long count)
{
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
struct subid_nss_ops *h;
bool found;
enum subid_status status;
h = get_subid_nss_handle();
if (h) {
status = h->has_range(owner, start, count, ID_TYPE_GID, &found);
if (status == SUBID_STATUS_SUCCESS && found)
return true;
return false;
}
return have_range(&subordinate_gid_db, owner, start, count);
}
bool local_sub_gid_assigned(const char *owner)
{
return range_exists (&subordinate_gid_db, owner);
}
int sub_gid_add (const char *owner, gid_t start, unsigned long count)
{
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (get_subid_nss_handle())
return -EOPNOTSUPP;
return add_range (&subordinate_gid_db, owner, start, count);
}
int sub_gid_remove (const char *owner, gid_t start, unsigned long count)
{
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (get_subid_nss_handle())
return -EOPNOTSUPP;
return remove_range (&subordinate_gid_db, owner, start, count);
}
int sub_gid_close (void)
{
return commonio_close (&subordinate_gid_db);
}
int sub_gid_unlock (void)
{
return commonio_unlock (&subordinate_gid_db);
}
gid_t sub_gid_find_free_range(gid_t min, gid_t max, unsigned long count)
{
unsigned long start;
start = find_free_range (&subordinate_gid_db, min, max, count);
return start == ULONG_MAX ? (gid_t) -1 : start;
}
static bool get_owner_id(const char *owner, enum subid_type id_type, char *id)
{
struct passwd *pw;
struct group *gr;
int ret = 0;
switch (id_type) {
case ID_TYPE_UID:
pw = getpwnam(owner);
if (pw == NULL) {
return false;
}
ret = snprintf(id, ID_SIZE, "%u", pw->pw_uid);
if (ret < 0 || ret >= ID_SIZE) {
return false;
}
break;
case ID_TYPE_GID:
gr = getgrnam(owner);
if (gr == NULL) {
return false;
}
ret = snprintf(id, ID_SIZE, "%u", gr->gr_gid);
if (ret < 0 || ret >= ID_SIZE) {
return false;
}
break;
default:
return false;
}
return true;
}
/*
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
* int list_owner_ranges(const char *owner, enum subid_type id_type, struct subordinate_range ***ranges)
*
* @owner: username
* @id_type: UID or GUID
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
* @ranges: pointer to array of ranges into which results will be placed.
*
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
* Fills in the subuid or subgid ranges which are owned by the specified
* user. Username may be a username or a string representation of a
* UID number. If id_type is UID, then subuids are returned, else
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
* subgids are given.
* Returns the number of ranges found, or < 0 on error.
*
* The caller must free the subordinate range list.
*/
int list_owner_ranges(const char *owner, enum subid_type id_type, struct subid_range **in_ranges)
{
// TODO - need to handle owner being either uid or username
struct subid_range *ranges = NULL;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
const struct subordinate_range *range;
struct commonio_db *db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
enum subid_status status;
int count = 0;
struct subid_nss_ops *h;
char id[ID_SIZE];
bool have_owner_id;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
*in_ranges = NULL;
h = get_subid_nss_handle();
if (h) {
status = h->list_owner_ranges(owner, id_type, in_ranges, &count);
if (status == SUBID_STATUS_SUCCESS)
return count;
return -1;
}
switch (id_type) {
case ID_TYPE_UID:
if (!sub_uid_open(O_RDONLY)) {
return -1;
}
db = &subordinate_uid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
case ID_TYPE_GID:
if (!sub_gid_open(O_RDONLY)) {
return -1;
}
db = &subordinate_gid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
default:
return -1;
}
have_owner_id = get_owner_id(owner, id_type, id);
commonio_rewind(db);
while ((range = commonio_next(db)) != NULL) {
if (0 == strcmp(range->owner, owner)) {
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (!append_range(&ranges, range, count++)) {
free(ranges);
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
ranges = NULL;
count = -1;
goto out;
}
}
// Let's also compare with the ID
if (have_owner_id == true && 0 == strcmp(range->owner, id)) {
if (!append_range(&ranges, range, count++)) {
free(ranges);
ranges = NULL;
count = -1;
goto out;
}
}
}
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
out:
if (id_type == ID_TYPE_UID)
sub_uid_close();
else
sub_gid_close();
*in_ranges = ranges;
return count;
}
static bool all_digits(const char *str)
{
int i;
for (i = 0; str[i] != '\0'; i++)
if (!isdigit(str[i]))
return false;
return true;
}
static int append_uids(uid_t **uids, const char *owner, int n)
{
uid_t owner_uid;
uid_t *ret;
int i;
if (all_digits(owner)) {
i = sscanf(owner, "%d", &owner_uid);
if (i != 1) {
// should not happen
free(*uids);
*uids = NULL;
return -1;
}
} else {
struct passwd *pwd = getpwnam(owner);
if (NULL == pwd) {
2021-09-13 20:41:40 +05:30
/* Username not defined in /etc/passwd, or error occurred during lookup */
free(*uids);
*uids = NULL;
return -1;
}
owner_uid = pwd->pw_uid;
}
for (i = 0; i < n; i++) {
if (owner_uid == (*uids)[i])
return n;
}
ret = REALLOCARRAY(*uids, n + 1, uid_t);
if (!ret) {
free(*uids);
return -1;
}
ret[n] = owner_uid;
*uids = ret;
return n+1;
}
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
int find_subid_owners(unsigned long id, enum subid_type id_type, uid_t **uids)
{
const struct subordinate_range *range;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
struct subid_nss_ops *h;
enum subid_status status;
struct commonio_db *db;
int n = 0;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
h = get_subid_nss_handle();
if (h) {
status = h->find_subid_owners(id, id_type, uids, &n);
// Several ways we could handle the error cases here.
if (status != SUBID_STATUS_SUCCESS)
return -1;
return n;
}
switch (id_type) {
case ID_TYPE_UID:
if (!sub_uid_open(O_RDONLY)) {
return -1;
}
db = &subordinate_uid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
case ID_TYPE_GID:
if (!sub_gid_open(O_RDONLY)) {
return -1;
}
db = &subordinate_gid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
default:
return -1;
}
*uids = NULL;
commonio_rewind(db);
while ((range = commonio_next(db)) != NULL) {
if (id >= range->start && id < range->start + range-> count) {
n = append_uids(uids, range->owner, n);
if (n < 0)
break;
}
}
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (id_type == ID_TYPE_UID)
sub_uid_close();
else
sub_gid_close();
return n;
}
bool new_subid_range(struct subordinate_range *range, enum subid_type id_type, bool reuse)
{
struct commonio_db *db;
const struct subordinate_range *r;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
bool ret;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (get_subid_nss_handle())
return false;
switch (id_type) {
case ID_TYPE_UID:
if (!sub_uid_lock()) {
printf("Failed locking subuids (errno %d)\n", errno);
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
return false;
}
if (!sub_uid_open(O_CREAT | O_RDWR)) {
printf("Failed opening subuids (errno %d)\n", errno);
sub_uid_unlock();
return false;
}
db = &subordinate_uid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
case ID_TYPE_GID:
if (!sub_gid_lock()) {
printf("Failed locking subgids (errno %d)\n", errno);
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
return false;
}
if (!sub_gid_open(O_CREAT | O_RDWR)) {
printf("Failed opening subgids (errno %d)\n", errno);
sub_gid_unlock();
return false;
}
db = &subordinate_gid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
default:
return false;
}
commonio_rewind(db);
if (reuse) {
while ((r = commonio_next(db)) != NULL) {
// TODO account for username vs uid_t
if (0 != strcmp(r->owner, range->owner))
continue;
if (r->count >= range->count) {
range->count = r->count;
range->start = r->start;
return true;
}
}
}
range->start = find_free_range(db, range->start, ULONG_MAX, range->count);
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
if (range->start == ULONG_MAX) {
ret = false;
goto out;
}
ret = add_range(db, range->owner, range->start, range->count) == 1;
out:
if (id_type == ID_TYPE_UID) {
sub_uid_close();
sub_uid_unlock();
} else {
sub_gid_close();
sub_gid_unlock();
}
return ret;
}
bool release_subid_range(struct subordinate_range *range, enum subid_type id_type)
{
struct commonio_db *db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
bool ret;
if (get_subid_nss_handle())
return false;
switch (id_type) {
case ID_TYPE_UID:
if (!sub_uid_lock()) {
printf("Failed locking subuids (errno %d)\n", errno);
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
return false;
}
if (!sub_uid_open(O_CREAT | O_RDWR)) {
printf("Failed opening subuids (errno %d)\n", errno);
sub_uid_unlock();
return false;
}
db = &subordinate_uid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
case ID_TYPE_GID:
if (!sub_gid_lock()) {
printf("Failed locking subgids (errno %d)\n", errno);
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
return false;
}
if (!sub_gid_open(O_CREAT | O_RDWR)) {
printf("Failed opening subgids (errno %d)\n", errno);
sub_gid_unlock();
return false;
}
db = &subordinate_gid_db;
subids: support nsswitch Closes #154 When starting any operation to do with subuid delegation, check nsswitch for a module to use. If none is specified, then use the traditional /etc/subuid and /etc/subgid files. Currently only one module is supported, and there is no fallback to the files on errors. Several possibilities could be considered: 1. in case of connection error, fall back to files 2. in case of unknown user, also fall back to files etc... When non-files nss module is used, functions to edit the range are not supported. It may make sense to support it, but it also may make sense to require another tool to be used. libsubordinateio also uses the nss_ helpers. This is how for instance lxc could easily be converted to supporting nsswitch. Add a set of test cases, including a dummy libsubid_zzz module. This hardcodes values such that: 'ubuntu' gets 200000 - 300000 'user1' gets 100000 - 165536 'error' emulates an nss module error 'unknown' emulates a user unknown to the nss module 'conn' emulates a connection error ot the nss module Changes to libsubid: Change the list_owner_ranges api: return a count instead of making the array null terminated. This is a breaking change, so bump the libsubid abi major number. Rename free_subuid_range and free_subgid_range to ungrant_subuid_range, because otherwise it's confusing with free_subid_ranges which frees memory. Run libsubid tests in jenkins Switch argument order in find_subid_owners Move the db locking into subordinateio.c Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
break;
default:
return false;
}
ret = remove_range(db, range->owner, range->start, range->count) == 1;
if (id_type == ID_TYPE_UID) {
sub_uid_close();
sub_uid_unlock();
} else {
sub_gid_close();
sub_gid_unlock();
}
return ret;
}
#else /* !ENABLE_SUBIDS */
extern int ISO_C_forbids_an_empty_translation_unit;
#endif /* !ENABLE_SUBIDS */