Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
/*
|
|
|
|
* Copyright (c) 2020 Serge Hallyn
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. The name of the copyright holders or contributors may not be used to
|
|
|
|
* endorse or promote products derived from this software without
|
|
|
|
* specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <config.h>
|
|
|
|
#include <fcntl.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <errno.h>
|
|
|
|
#include <stdlib.h>
|
2021-05-09 04:12:14 +05:30
|
|
|
#include <string.h>
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
#include <pwd.h>
|
|
|
|
#include <stdbool.h>
|
|
|
|
#include "subordinateio.h"
|
|
|
|
#include "idmapping.h"
|
2021-04-15 20:22:29 +05:30
|
|
|
#include "subid.h"
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
|
2021-05-09 04:12:14 +05:30
|
|
|
const char *Prog = "(libsubid)";
|
|
|
|
extern FILE * shadow_logfd;
|
|
|
|
|
|
|
|
bool libsubid_init(const char *progname, FILE * logfd)
|
|
|
|
{
|
|
|
|
if (progname) {
|
|
|
|
progname = strdup(progname);
|
2021-05-17 19:18:03 +05:30
|
|
|
if (progname) {
|
2021-05-09 04:12:14 +05:30
|
|
|
Prog = progname;
|
2021-05-17 19:18:03 +05:30
|
|
|
} else {
|
2021-05-09 04:12:14 +05:30
|
|
|
fprintf(stderr, "Out of memory");
|
2021-05-17 19:18:03 +05:30
|
|
|
return false;
|
|
|
|
}
|
2021-05-09 04:12:14 +05:30
|
|
|
}
|
|
|
|
|
|
|
|
if (logfd) {
|
|
|
|
shadow_logfd = logfd;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
shadow_logfd = fopen("/dev/null", "w");
|
|
|
|
if (!shadow_logfd) {
|
|
|
|
fprintf(stderr, "ERROR opening /dev/null for error messages. Using stderr.");
|
|
|
|
shadow_logfd = stderr;
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
static
|
|
|
|
int get_subid_ranges(const char *owner, enum subid_type id_type, struct subordinate_range ***ranges)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return list_owner_ranges(owner, id_type, ranges);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
int get_subuid_ranges(const char *owner, struct subordinate_range ***ranges)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return get_subid_ranges(owner, ID_TYPE_UID, ranges);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
int get_subgid_ranges(const char *owner, struct subordinate_range ***ranges)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return get_subid_ranges(owner, ID_TYPE_GID, ranges);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
void subid_free_ranges(struct subordinate_range **ranges, int count)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return free_subordinate_ranges(ranges, count);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
static
|
|
|
|
int get_subid_owner(unsigned long id, enum subid_type id_type, uid_t **owner)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return find_subid_owners(id, id_type, owner);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
|
|
|
int get_subuid_owners(uid_t uid, uid_t **owner)
|
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return get_subid_owner((unsigned long)uid, ID_TYPE_UID, owner);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
|
|
|
int get_subgid_owners(gid_t gid, uid_t **owner)
|
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return get_subid_owner((unsigned long)gid, ID_TYPE_GID, owner);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
static
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
bool grant_subid_range(struct subordinate_range *range, bool reuse,
|
|
|
|
enum subid_type id_type)
|
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return new_subid_range(range, id_type, reuse);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
|
|
|
bool grant_subuid_range(struct subordinate_range *range, bool reuse)
|
|
|
|
{
|
|
|
|
return grant_subid_range(range, reuse, ID_TYPE_UID);
|
|
|
|
}
|
|
|
|
|
|
|
|
bool grant_subgid_range(struct subordinate_range *range, bool reuse)
|
|
|
|
{
|
|
|
|
return grant_subid_range(range, reuse, ID_TYPE_GID);
|
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
static
|
|
|
|
bool ungrant_subid_range(struct subordinate_range *range, enum subid_type id_type)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return release_subid_range(range, id_type);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
bool ungrant_subuid_range(struct subordinate_range *range)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return ungrant_subid_range(range, ID_TYPE_UID);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|
|
|
|
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
bool ungrant_subgid_range(struct subordinate_range *range)
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
{
|
subids: support nsswitch
Closes #154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2021-02-01 05:08:20 +05:30
|
|
|
return ungrant_subid_range(range, ID_TYPE_GID);
|
Create a new libsubid
Closes #154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
2020-04-19 04:33:54 +05:30
|
|
|
}
|