To avoid an out-of-bounds access at checkoff[tmp]. The strspn() at the
beginning of the function protects against it already, but double-check
this in case of some future change.
Right now, "we _exit() anyway" is not always true: for example, the
default action for SIGURG is to ignore the signal, which means that
"kill(getpid(), signo);" does not terminate the process. Call _exit()
explicitly, in this case (rather than exit(), because the terminating
kill() calls do not call the functions registered with atexit() either).
Before "strlen(outbuf)", if one of the pr_*() functions forgot to do it.
This prevents an out-of-bounds read in strlen(), and an out-of-bounds
write in "outbuf[sz] = '\n'". Another solution would be to replace
strlen() with strnlen(), but this is not used anywhere else in the
code-base and may not exist in all libc's.
---------------------------- adapted for newlib branch
. adapted via 'patch' without rejections
Signed-off-by: Jim Warner <james.warner@comcast.net>
pr_bsdstart(): Replace "strcpy(outbuf," with "snprintf(outbuf, COLWID,"
(which is used in all surrounding functions). (side note: the fact that
many pr_*() functions simply return "snprintf(outbuf, COLWID," justifies
the "amount" checks added to show_one_proc() by the "ps/output.c:
Replace strcpy() with snprintf() in show_one_proc()." patch)
pr_stime(): Check the return value of strftime() (in case of an error,
"the contents of the array are undefined").
help_pr_sig(): Handle the "len < 8" case, otherwise "sig+len-8" may
point outside the sig string.
pr_context(): Handle the empty string case, or else "outbuf[len-1]"
points outside outbuf.
---------------------------- adapted for newlib branch
. logic is quite different with 'stacks' vs. 'proc_t'
Signed-off-by: Jim Warner <james.warner@comcast.net>
Enforce a maximum max_rightward of OUTBUF_SIZE-1, because it is used in
constructs such as "snprintf(outbuf, max_rightward+1," (we could remove
the extra check at the beginning of forest_helper() now, but we decided
to leave it, as a precaution and reminder).
The minimum max_rightward check is not strictly needed, because it is
unsigned. However, we decided to add it anyway:
- most of the other variables are signed;
- make it visually clear that this case is properly handled;
- ideally, the minimum max_rightward should be 1, not 0 (to prevent
integer overflows such as "max_rightward-1"), but this might change
the behavior/output of ps, so we decided against it, for now.
Instead, we fixed the only function that overflows if max_rightward is
0. Also, enforce the same safe range for max_leftward, although it is
never used throughout the code-base.
---------------------------- adapted for newlib branch
. adapted via 'patch' without rejections
Signed-off-by: Jim Warner <james.warner@comcast.net>
This strcpy() should normally not overflow outbuf, but names can be
overridden (via -o). Also, check "amount" in all cases.
---------------------------- adapted for newlib branch
. we don't use that 'likely/unlikely' crap in newlib
Signed-off-by: Jim Warner <james.warner@comcast.net>
It is static and not used anywhere.
---------------------------- adapted for newlib branch
. limited to whitespace/formatting differences
Signed-off-by: Jim Warner <james.warner@comcast.net>
We decided not to check the return value of the mprotect() calls,
because they are not vital to the operation of ps.
---------------------------- adapted for newlib branch
. many formatting/whitespace differences
Signed-off-by: Jim Warner <james.warner@comcast.net>
1/ Do not go deeper than the size of forest_prefix[], to prevent a
buffer overflow (sizeof(forest_prefix) is roughly 128K, but the maximum
/proc/sys/kernel/pid_max is 4M). (actually, we go deeper, but we stop
adding bytes to forest_prefix[])
2/ Always null-terminate forest_prefix[] at the current level.
---------------------------- adapted for newlib branch
. logic is quite different with 'stacks' vs. 'proc_t'
. a commented out 'debug' line was no longer present
Signed-off-by: Jim Warner <james.warner@comcast.net>
Because there is usually less than OUTBUF_SIZE available at endp.
---------------------------- adapted for newlib branch
. logic is quite different with 'stacks' vs. 'proc_t'
. ps no longer deals with the library 'FILL...' flags
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch solves several problems:
1/ Limit the number of characters written (to outbuf) to OUTBUF_SIZE-1
(-1 for the null-terminator).
2/ Always null-terminate outbuf at q.
3/ Move the "rightward" checks *before* the strcpy() calls.
4/ Avoid an integer overflow in these checks (e.g., rightward-4).
May happen if strlen(src) > INT_MAX for example. This patch prevents
escaped_copy() from increasing maxroom and returning -1 (= number of
bytes consumed in dst).
---------------------------- adapted for newlib branch
. formerly applied to proc/escape.c
. function was moved to ps/output.c
Signed-off-by: Jim Warner <james.warner@comcast.net>
The SECURE_ESCAPE_ARGS() macro solves several potential problems
(although we found no problematic calls to the escape*() functions in
procps's code-base, but had to thoroughly review every call; and this is
library code):
1/ off-by-one overflows if the size of the destination buffer is 0;
2/ buffer overflows if this size (or "maxroom") is negative;
3/ integer overflows (for example, "*maxcells+1");
4/ always null-terminate the destination buffer (unless its size is 0).
---------------------------- adapted for newlib branch
. formerly applied to proc/escape.c
. function was moved to ps/output.c
Signed-off-by: Jim Warner <james.warner@comcast.net>
While the previous patch concerned an essential change
to avoid dereferencing those NULL pointers, this patch
could be considered optional. For consistency, it just
puts all initialization logic after the setREL macros.
[ plus along the way some inter-function spacing was ]
[ standardized with just a single blank line between ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Under newlib design, ps must loop though all potential
print functions so as to gather the appropriate enum's
while establishing the 'relative' equivalent. The keys
to the setREL/chkREL macros are a NULL 'outbuf' param.
It's imperative that no other functions be called with
that NULL value. Unfortunately, several instances were
found where this was violated. They are now corrected!
Signed-off-by: Jim Warner <james.warner@comcast.net>
These format specifiers are to time & cputime what etimes is to etime.
Signed-off-by: Sébastien Bigaret <sebastien.bigaret@telecom-bretagne.eu>
References:
procps-ng/procps!43
The ps program generally supports multi-byte sequences
in strings representing user and group names. However,
should a multi-byte sequence span the maximum width of
a column, the '+' inserted by ps to signify truncation
will corrupt that sequence, misaligning the text line.
Unfortunately, there's insufficient info returned from
the escape_str function (who calls escape_str_utf8) to
provide a robust response. So, this commit will revert
to the old standby of displaying a number when the '+'
character would've corrupted that multi-byte sequence.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Reference(s):
proc/readproc.c: In function 'statm2proc'
proc/readproc.c:600:9: warning: variable 'num' set but not used [-Wunused-but-set-variable]
proc/stat.c: In function 'stat_derive_unique':
proc/stat.c:429:1: warning: no return statement in function returning non-void [-Wreturn-type]
ps/parser.c: In function 'arg_type':
ps/parser.c:1098:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
ps/parser.c:1099:34: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
lib/signals.c: In function 'strtosig':
lib/signals.c:243:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
lib/signals.c:245:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
slabtop.c: In function 'print_summary':
slabtop.c:223:29: warning: unused variable 'stats' [-Wunused-variable]
watch.c: In function 'process_ansi':
watch.c:232:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
watch.c:235:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
Signed-off-by: Jim Warner <james.warner@comcast.net>
Aw shucks, not all support for this defunct enumerator
was removed via the commits shown below (but, is now).
[ what remained were just variables named after that ]
[ deprecated/deleted enumerator, but still & all ... ]
[ plus, i have left the doc/libproc.3 file untouched ]
[ since it already appears badly out of date anyway! ]
Reference(s):
. ps references partially purged
commit 66c4024d75
. enumerator purged from library
commit 912075605b
Signed-off-by: Jim Warner <james.warner@comcast.net>
While a Debian bug report referenced below was limited
to the 'eip' and 'esp' fields, this patch also extends
address width adaptations to some other addresses too.
[ and, we do so in a far less invasive manner than a ]
[ redhat approach shown below adding two new fields! ]
Reference(s):
. new debian bug report
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=846361
. old redhat solution
https://bugzilla.redhat.com/show_bug.cgi?id=244152
Signed-off-by: Jim Warner <james.warner@comcast.net>
No longer will ps print nwchan as 'ffffff', '-' or '1'
since the proc/PID/stat wchan field didn't represent a
real address anyway. Rather, the field will henceforth
output a dash ('-'), the ps customary 'not available'.
That man document was also tweaked to better represent
actual behavior. An asterisk ('*') was never shown for
threaded tasks and that dash ('-') usually didn't mean
running tasks (sometimes associated with permissions).
Signed-off-by: Jim Warner <james.warner@comcast.net>
dlopen() functionality is only used when SELinux support is enabled, so
<dlfcn.h> only needs to be included when ENABLE_LIBSELINUX is
defined. This fixes the build in configurations where <dlfcn.h> is not
available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is a response to errors found in those type
references now that our library allows for validation.
In two cases, former assignments to a result structure
could no longer employ that VAL macro if validation is
active. Thus, direct reference to some stack was used.
For the record, those instances were to be found here:
. ps - uses PIDS_extra to store the cooked pcpu values
. top - uses PIDS_extra to store the forest view level
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since the VAL macro now requires a 4th parameter, this
commit simply adds the 'info' context structure to it.
In some cases, that context structure needed to become
global, since it was referenced in multiple functions.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch is the response to changes in <pids> types.
These additional modifications were also incorporated.
. ps -------------------------------------------------
pr_wname was eliminated as it just duplicated pr_wchan
pr_wchan referenced WCHAN_ADDR in error, vs WCHAN_NAME
pr_nwchan referenced WCHAN_NAME, not proper WCHAN_ADDR
Signed-off-by: Jim Warner <james.warner@comcast.net>
With this patch we've completed a progression toward a
standard approach to naming conventions which follows:
* Only functions will begin with that 'procps_' prefix
. ........................................... examples
. procps_vmstat_get ()
. procps_diskstats_select ()
- ----------------------------------------------------
* Exposed structures begin with the module/header name
. ........................................... examples
. struct pids_info
. struct stat_reaped
- ----------------------------------------------------
* Item enumerators begin like structs, but capitalized
. ........................................... examples
. VMSTAT_COMPACT_FAIL
. MEMINFO_DELTA_ACTIVE
[ slabinfo varies slightly due to some item variants ]
. SLABINFO_extra
. SLABS_SIZE_ACTIVE
. SLABNODE_OBJS_PER_SLAB
[ could cure with a prefix of SLABINFO, but too long ]
- ----------------------------------------------------
* Other enumerators work exactly like item enumerators
. ........................................... examples
. PIDS_SORT_ASCEND
. STAT_REAP_CPUS_AND_NODES
- ----------------------------------------------------
* Macros and constants begin just like the enumerators
. ........................................... examples
. #define SLABINFO_GET
. #define DISKSTATS_TYPE_DISK
- ----------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ plus we also play catch up on some earlier changes ]
[ that impacted skill.c, after using --enable-skill! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the change to struct pids_fetch, we'll just trade
some dot ('.') code for some pointer to ('->') syntax.
Signed-off-by: Jim Warner <james.warner@comcast.net>
I've got nothing to add to the commit message but that
doesn't mean I won't produce perfectly justified text.
Signed-off-by: Jim Warner <james.warner@comcast.net>
I've got nothing to add to the commit message but that
doesn't mean I won't produce perfectly justified text.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The 'new' function requires a NULL context pointer, so
when existing code worked, it was just a case of luck.
Signed-off-by: Jim Warner <james.warner@comcast.net>
For some time with enough compilier flags I have watched the
following warning drift by:
ps/output.c: In function ‘pr_nwchan’:
ps/output.c:658:41: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
return snprintf(outbuf, COLWID, "%x", (unsigned)rSv(WCHAN_NAME, str, pp));
nwchan is supposed to be the address of where the process is sleeping,
not the name. Besides %x is a hex number not a string hence the warning.
nwchan now prints the address, in hex and GCC is happy.
This patch just brings *most* other programs into line
with those changes recently made in the <meminfo> API.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch brings the ps program (very small impact) &
that vmstat program (major impact) into agreement with
the new <stat> API. In the case of the latter guy, the
many separate calls to 'get' should be replaced by one
single 'select' call obtaining all data in one stroke.
[ but, i was too tired to undertake that enhancement ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
procps_uptime, previously just plain uptime() used to put the
uptime (as a double) in the first argument and return uptime
(as an int).
It meant if you ran
myuptime2 = procps_uptime(&myuptime1, NULL);
You might get different results for myuptime1 and myuptime2 because
they are different types.
Most library calls use the return value to return the status,
procps_uptime was in the middle.
Until now.
This function will return 0 on success. If you want (for whatever
reason) uptime as an int then cast it.
All of the procps binaries didn't use the return value for uptime
except ps which set a variable to it but never used it anywhere.
escaped_copy(): only appears in ps, moved to ps/output.c
escape_strlist() only used in escape.c made static
escape_command() used in library, made internal
procps.h no longer includes escape.h
escape_str() used by library and ps so needs to be exported
definition put into procps.h including the odd define required.
Far from ideal to have it this way, will look at it another time
to have it all in, all out or split nicer so its not in the API;
perhaps a lib/ file?
The includes used to define a lot of things a library include
should not. It was also a bit messy what was exposed in the library
and what was not.
get_pid_digits -> procps_pid_length and exported correctly
MALLOC attribute move into relevant .c files
NORETURN attribute moved to relevant .c, not used in library
PURE attribute removed, it wasn't used
KLONG/KLF/STRTOUKL were fixed for long, so now just use long
HIDDEN attribute removed. It was for 3 functions. The PROCPS_EXPORT
seems to do the same (opposite) thing.
likely/unlikely removed from most places, its highly debateable
this does anything useful as CPUs have gotten smarter about branches.
Re-arranged the includes, ALL external programs should just #include
<proc/procps.h> then proc/procps.h includes headers for files that
have exported functions. procps.h and the headers it includes should
not use items that are not exportable (e.g. hidden functions or
macros) they go in procps-private.h
If SELINUX is enabled but the machine is using another MAC system
(like apparmor), ps will fallback to just parsing
"/proc/%d/attr/current", otherwise the label/context would not
be properly displayed in that case.
References:
https://bugs.debian.org/786956
Signed-off-by: Craig Small <csmall@enc.com.au>
ps previously followed the Unix98 standard when it comes to
user-defined output, sometimes. This meant you could have
user output format with a header that included commas and
equals signs. It was dependent on if ps thought you wanted
sysv or bsd format and THAT was dependent on things in previous
options.
It was very confusing to a user because
ps p $$ -o pid=,comm=
gave you a two-column output but
ps -p $$ -o pid=,comm=
would give you a one column output with the header ",comm="
The -p versus p means (to ps) you want sysv or bsd parsing.
Unix98 standard or not, this is plainly just silly.
The commit removes any of the quirks Unix98 has with user defined
output. If you really wanted a ps header with commas in the output,
today isn't your day.
Signed-off-by: Craig Small <csmall@enc.com.au>
[ but stay tuned! there is a commit coming soon that ]
[ represents a rather major internal redesign, which ]
[ was prompted by the ps and top adaptation testing. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.
This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.
Signed-off-by: Craig Small <csmall@enc.com.au>
Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 0ee090ae16
With the conversion to the new <pids> interface, a few
comments (only) are being adjusted, as detailed below.
. Escapes '\' crept into some comments containing '|'.
. For consistency, add '.' dot qualifier to a comment.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit represents the ps transition to the <pids>
'stacks' interface. While an effort to minimize impact
on existing code was made (as with a disguised proc_t)
the changes were still extensive. Along the way, a few
modifications beyond simply conversion were also made.
------------------------------------------------------
Here's a brief overview the design of this conversion:
. The need to satisfy relative enum requirements could
not easily have been made table driven since any entry
in the format_array might require several <pids> items
in support. So I decided to allow every print function
to contribute its own relative enums once the decision
as to exactly what will be printed had been finalized.
. A similar approach was taken for sorting, since it's
possible to have sort keys that will not be displayed.
Here, I relied on the existing print extensions above.
. In summary, just prior to printing ps walks thru two
lists one time (the format_list & sort_list) and calls
each print function. That function does not print, but
sets its required enum if necessary. Later, when those
same functions are called repeatedly for every printed
line, the only overhead will be an if test and branch.
------------------------------------------------------
Below is a summary of major changes beyond conversion:
. Sorts are now the responsibility of the library. And
therefore the total # of sortable fields substantially
increased without effort. Additionally, several quirky
fields remain as sortable, even though they can't ever
be printed(?). Surely that must make sense to someone.
[ while on this subject of sort, please do *not* try ]
[ to sort old ps on 'args'. or better yet, if you do ]
[ try that sort, see if you can determine his order, ]
[ without peeking at the source. that one hurts yet! ]
. All logic dealing with the old openproc flags and ps
struct members known as 'need' have been whacked since
that entire area was solely the new library's concern.
. Remaining malloc/calloc calls to stdlib were changed
to xmalloc/xcalloc from our own include/xalloc.h file.
None of the replaced calls ever checked return values.
[ be aware that 2 minor potential memory leaks exist ]
[ depending on command line arguments. no attempt is ]
[ made to free dynamically acquired format/sort node ]
[ structures upon return; a conscious design choice. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Functions related to namespaces were half-in half-out of the
procps library and didn't fit the standard naming scheme.
While struct { long ns[x]} is a bit clunky, its the only way
to "lock in" x. The alternative is to use ns_* variables.
This work was needed before pgrep could be converted.
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.
This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.
Signed-off-by: Craig Small <csmall@enc.com.au>
A rather small fix to sort by cgroup. This sorting function
could be used for other string vector entries, but I can't
see why you want to for, say, environment.
Reference:
https://bugs.debian.org/692279
Signed-off-by: Craig Small <csmall@enc.com.au>
ps has two columns showing the same data which is elapsed time, just
the format is changed:
etimes - elapsed time in seconds
etime - elapsed time in DD-hh:mm:ss
ps used to only sort by etime but not etimes, by making etimes
and alias of etime for sorting both flags work.
References:
https://bugs.debian.org/794619
Signed-off-by: Craig Small <csmall@enc.com.au>
In addition to that text shown below the line which is
common to several commit messages, this patch contains
several minor changes with lessor impact upon the API:
. A call to procps_stat_read_jiffs() has been added to
those jiffs functions carrying the 'fill' nomenclature
to parallel like functions in some of our other files.
. The #include header files are ordered alphabetically
now, with all those <sys/??> types separately grouped.
. Standard copyright boilerplate was added in .c file.
. The header file follows the conventions of indenting
(by 4 spaces) those parameters too lengthy for 1 line.
------------------------------------------------------
. The former 'chains' have now become 'stacks' without
the 'next' pointer in each result struct. The pointers
initially seemed to offer some flexibility with memory
allocations and benefits for the library access logic.
However, user access was always via displacement and a
a statically allocated chain was cumbersome to define.
. An enumerator ending in '_noop' will no longer serve
as a fencepost delimiter. Rather, it has become a much
more important and flexible user oriented tool. Adding
one or more such 'items' in any items list passed into
the library becomes the means of extending the 'stack'
to also include user (not just library) data. Any such
data is guaranteed to never be altered by the library.
. Anticipating PID support, where many different types
must be represented in a result structure, we'll adopt
a common naming standard. And, while not every results
structure currently needs to reflect disparate types a
union will be employed so the same dot qualifier ('.')
can be used consistently when accessing all such data.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The new library meminfo & vmstat modules use structure
names for their context which exactly mirror the names
of the very /proc/ files whose particulars they yield.
The one exception to this rule was the readstat module
whose struct was named statinfo yet the file was stat.
This commit simply renames that structure (only) so as
to hopefully establish such a naming convention as our
standard going forward. And, it's makes good symmetry.
[ this module's name itself is just perfect as it is ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
The earlier attempt at protecting these functions from
already freed memory worked just fine until the memory
was, in fact, reused by the OS. At that point, the ref
count would most likely fail an existing a test for 0.
So this commit will take control of the 'info' pointer
and force it to NULL when a reference count reaches 0.
Plus, since it makes little sense returning an address
that a caller already has, henceforth we will return a
reference count out of the 'ref' and 'unref functions.
Reference(s):
commit 74beff80ff
Signed-off-by: Jim Warner <james.warner@comcast.net>
Procps library previously held functions that were about either
listing or finding signal names. These are not really the right
location for a library about reading procfs.
This patch handles signal related functions in two ways:
For functions purely found in skill, these have been moved back
into this binary as they are used nowhere else.
For functions used across the binaries, these have been moved
into include/signals.h and lib/signals.c. Besides formatting,
these functions are largely the same.
To assist the skill functions, two functions to access the
signal map array have been added to lib/signals.c
This patch mostly just eliminates darn tab characters.
Plus the library function declarations and definitions
have been standardized. Most visibly, the input params
now have all been indented on their own separate line.
The following names were changed to more closely match
meminfo.c or provide a certain symmetry. Unfortunately
that also impacted some other pgms which were updated.
. 'procps_stat_get' evolved into 'procps_stat_get_sys'
. 'procps_stat_info' is now known as 'procps_statinfo'
[and just a little trailing whitespace was eliminated]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Added function procps_linux_version() which used to be an
exported integer instead. Also changed the method of obtaining
the linux version (more correctly the os release) to use a specific
procfs entry. This works for both Linux and FreeBSD.
This patch will bring three of our man pages into line
with the recent refactor of the libprocps wchan logic.
[ and also eliminates more damn eol whitespace which ]
[ snuck in our repo with the commit referenced below ]
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
commit cf4788c28d
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.
In addition, this commit eliminates a broken alternate
'namelist' provision which was intended to allow users
to specify a System.map file to be used in translating
addresses into function names. But, the real effect of
the now defunct 'N' and '-n' options was to indirectly
force addresses (not names) to be displayed since such
user named map files could not be successfully parsed.
Besides when the required FRAME_POINTER kconfig option
is absent there is no address to translate and when it
is present /proc/PID/wchan is already translated. Thus
an alternate mapping is unnecessary and inappropriate.
[ we'll forgive POSIX for documenting '-n namelist' ]
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
Signed-off-by: Jim Warner <james.warner@comcast.net>
It doesn't make any sense to have the binary version strings
embedded into the library. The version strings are defined
already either in the Makefile or in include/c.h
ps now truncates usernames and doesn't change them to uids.
Man page is now updated with the correct information
Signed-off-by: Craig Small <csmall@enc.com.au>
This will be required for subdir-objects, otherwise automake will have
problems with more than one Makefile.am having rules to build the same
files.
Tested that it builds and both `make check` and `make distcheck` work.
Tested `make install` and compared the tree with the one installed
before this commit, both installed the binaries to the same locations.
The binaries are also in the same location in the build tree (for
instance, ps/pscommand is still there.)
Checked the binaries for the correct libraries linked into them. Binary
sizes matched before and after this change.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This is required for out-of-tree build to work, since many source files
include e.g. proc/*.h which is not under the include/ directory.
Tested that `make distcheck` starts working after this patch.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This commit introduces a new option q/-q/--quick-pid
to the 'ps' command. The option does a similar job
to the p/-p/--pid option (i.e. selection of PIDs
listed in the comma separated list that follows
the option), but the new option is optimized
for speed.
In cases where users only need to specify a list
of PIDs to be shown and don't need other selection
options, forest type output and sorting options,
the new option is recommended as it decreases
the initial processing delay by avoiding reading
the necessary information from all the processes
running on the system and by simplifying
the internal filtering logic.
. a 'space' misinterpreted as the continuation request
. continuation character, resulting in a concatenation
. 2 missing fields inadvertently omitted from man page
Reference(s):
. bug report regarding missing fields
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/115016
Signed-off-by: Jim Warner <james.warner@comcast.net>
Minor fixes that the translator (Yuri) has found in some of the
strings. You only know how many typos and thinkos you have when
someone is trying to translate it.
Signed-off-by: Craig Small <csmall@enc.com.au>
Benno Schulenberg suggested some changes to the help messages
to provide some consistency and clarity for both the users and
translators of procps.
The test needed to be updated as the pmap output changed too.
Signed-off-by: Craig Small <csmall@enc.com.au>
SIGCONT is a continue signal. It seems that some zsh setups can send
this signal, causing ps to abort. This is not what "continue" means.
This change just uses the default handler which will continue a stopped
process.
References:
http://bugs.debian.org/732410http://www.zsh.org/cgi-bin/mla/redirect?WORKERNUMBER=32251
Signed-off-by: Craig Small <csmall@enc.com.au>
To assist translators, the help lines are split so that each translation
chunk has one option. This gives bonus of if we add or change an option,
only that option remains untranslated rather than the entire help block.
Reference:
http://www.freelists.org/post/procps/procpsng-for-Translation-Project,1
Signed-off-by: Craig Small <csmall@enc.com.au>
Library systemd-login offers possibility to display
name of a systemd slice unit for specific pid.
This patch adds output option "slice" which will
show name of systemd slice unit.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Sometimes with libselinux present but SELinux inactive
the context reported is "unconfined" which contains an
embedded newline. This then causes misalignment of any
subsequent data. So, ps will now protect against that.
Reference(s):
http://www.freelists.org/post/procps/enablelibselinux-switch,14
Signed-off-by: Jim Warner <james.warner@comcast.net>
Previously the libselinux support was present
in the sources, but disabled with a preprocessor
condition (#if 0).
From now the libselinux support can be enabled with
the --enable-libselinux switch available
in the configuration script. That way is more
flexible than local patches modifying the condition
value from 0 to 1.
ps : This patch removes sd_ prefix from recently added systemd output options
to let them look more tied with the system.
Patch does not change behaviour of these options, only modifies their
representation to user.
Library systemd-login offers possibility to display
name of seat for a session on multi-seat systems.
This patch adds output option "sd_seat" which will
show name of seat or "-", when name of seat can not
be determined, but "seat0" should always exist.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Library systemd-login offers possibility to display
name of systemd user unit for specific pid. Note that not all
processes are part of a user unit.
This patch adds output option "sd_uunit" which will
show name of user unit or "-", when process does not belong
to any user unit. This is similar to "sd_unit" but applies
to user units instead of system units.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Library systemd-login offers possibility to display
the name of the VM or container which process belongs to.
This patch adds output option "sd_machine" which will
show machine name or "-" when the name can not be determined.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Library systemd-login offers possibility to display the Unix
user identifier of the owner of the session of a process.
This information will also be displayed for user processes which
are shared between multiple login sessions of the same user,
where sd_session will be blank.
This patch adds output option "sd_ouid" which will show
user UID or "-", when there is no owner for a process.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Library systemd-login offers possibility to display name
of login session for specific pid.
Note that not all processes are part of a login session
(e.g. system service processes, user processes that are shared
between multiple sessions of the same user, or kernel threads).
This patch adds output option "sd_session" which will
show name of session or "-", when process does not belong
to any session.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Library systemd-login offers possibility to display
name of a systemd unit file for specific pid. Note that
not all processes are part of a system unit/service
(e.g. user processes, or kernel threads).
This patch adds output option "sd_unit" which will
show name of systemd unit or "-", when process does not
belong to any unit.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Each process in Linux has a /proc/<pid>/ns directory which contains
symbolic links to pipes that identify which namespaces that process
belongs to. This patch adds support for ps to display that information
optionally.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
