With that commit referenced below, which preserved the
'4' and + '!' toggles in the rcfile, this VER_J_RCFILE
macro was made superfluous. But, it was never removed.
Reference(s):
commit b46af6d213
Signed-off-by: Jim Warner <james.warner@comcast.net>
The pgrep code checks to see if the program is run as pkill or pidwait
and changes its behaviour accordingly. Some older versions of libtool
run the programs as lt-pkill and lt-pidwait which means the tests fail.
We add these two program names to the checks.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
vmstat -d testsuite will fail if your /proc/diskstats is present
but zero length. While this seems buggy behaviour from lxcfs, its
there and its a simple matter to test for it and skip those tests
if we are run on a zero length /proc/diskstats system.
The ps.1 manpage incorrectly stated that psr field showed the
processor the process was assigned to. However if the assignment
has changed but the process has not run, then the field doesn't
change.
Some digging by @srikard showed it wasn't the processor assigned
but the last one it was run on. The man page now correctly
describes psr in that way.
References:
procps-ng/procps#187
The sysctl.8 manpage explained the directory order but not that the
files were then ordered and run in lexiographic order no matter
the directory name.
References:
procps-ng/procps#200
This patch is ported from a merge request shown below,
and the following represents the original commit text.
------------------------------------------------------
top: In the bye_bye function, replace fputs with the write interface.
When top calls malloc, if a signal is received, it will
call sig_endpgm to process the signal. In the bye_bye function, if the
-b option is enable, the Batch variable is set, the fputs function
will calls malloc at the same time. The malloc function is not reentrant, so
it will cause the program to crash.
Signed-off-by: Shaohua Zhan <shaohua.zhan@windriver.com>
------------------------------------------------------
Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/127
Signed-off-by: Jim Warner <james.warner@comcast.net>
If you run slabtop with the -d option and then -o option the
delay gets set to zero and it runs forever. slabtop now checks
for this combination and errors.
Adding a DEJAGNU test also found that none of the slabtop
checks were running so they got added to the list and only the
ones that need /proc/slabinfo (if not readable) are skipped.
References:
#160
@ruihongw quite rightly pointed out we removed the l option
from the man page and getopt but the iunreachable case statement
remained.
References:
commit 94468ac0b3#162
Signed-off-by: Craig Small <csmall@dropbear.xyz>
That snowball, which began as a simple removal of some
brackets, now ends with this third patch restoring the
ability to build our project. It was made necessary by
the renaming (and rearranging) of several enumerators.
Signed-off-by: Jim Warner <james.warner@comcast.net>
After removing brackets from those 'derived' notations
I was surprised to discover that several origin/source
comments were wrong. So this patch fixes those errors.
[ along the way a couple enumerators were renamed to ]
[ better (i hope) reflect what they're representing. ]
[ that, in turn, also required a little rearranging. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
None of the other four new api headers use brackets on
derived items. With this patch we normalize the fifth.
[ it makes for a cleaner, less confusing, appearance ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
While experimenting with a new feature, wherein select
fields display the total upon request, the capacity of
the 'num' passed to some 'scale' guys became an issue.
So this commit will, with the compiler's help, put the
responsibility for converting the integer into a float
within the calling code (instead of the called logic).
Signed-off-by: Jim Warner <james.warner@comcast.net>
This small change was a result of some experimentation
trading our current 'hsearch' hash scheme for 'gperf'.
I discovered that when the ':' character was a part of
each 'gperf' key, that generated search logic was more
complicated and thus slower. But without a ':', it was
a little cleaner/leaner and therefore slightly faster.
Assuming that the same trailing ':' *might* affect the
current 'hsearch' logic, to be safe we will remove it.
[ while the 'gperf' version will slightly outperform ]
[ an 'hsearch', too many ugly implementation details ]
[ were exposed which complicates future maintenance. ]
[ thus, we'll retain our current 'hsearch' approach. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will condense some logic in those functions
associated with the file input operations. The changes
will not, for the most part, alter any generated code.
More significantly (though not very) was the change to
two 'strtoul' calls. Since the returned 'endptr' value
isn't exploited, when that parm is set to NULL, we can
save one instruction on each side of such calls (wow).
Signed-off-by: Jim Warner <james.warner@comcast.net>
If automake doesn't see a dist_man_MANS then there is no
uninstall-man target. This fix uses the main Makefile
targets.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
When #define QUICK_THREADS was introduced, for copying
some task data for a child thread, one proc_t pad byte
was used to mark, then later identify, those children.
Later the QUICK_THREADS was recycled as FALSE_THREADS,
and used for a different purpose, but a conditional in
the header file erroneously remained. Now, it is gone!
Reference(s):
. Jul, 2016 - QUICK_THREADS become FALSE_THREADS
commit c546d9dd44
. Aug, 2011 - QUICK_THREADS intruduced
commit bb4f08ba29
Signed-off-by: Jim Warner <james.warner@comcast.net>
What to call the new library?
Keep using libprocps wouldn't do, its a very different library from
the programs' point of view. It would also mean we could have some
clashes around the packages (two package names, same library name).
The ancient procps used libproc or libproc-a.b.c where a.b.c was the
package version. Kept the revision numbers down (it was always 0.0.0)
but the name of the library changed.
So if we use libproc-2 is there a clash with an ancient procps?
procps v 2.0.0 was around in 1999 so it was 22 years ago, also the
name of the library would have been libproc-2.0.0.so not libproc-2.so
so we're fine with that.
libproc-2 seems to fit, our second major re-work of the procps
library.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
Maybe, the biggest obstacle to successfully exploiting
this new library is after those `stacks' are returned.
Unless a user requests all available `items', there is
always a need to translate an actual enumerator into a
relative position within returned stack(s) of results.
So, this patch attempts to bridge that gap by adding a
brief explanation to the existing discussion in Usage.
[ along the way, 'Usage' & 'Caveats' were refactored ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since 'procps_uptime' will access the /proc filesystem
the <pids> 'new' guy should should protect against the
possibility /proc isn't mounted when 'boot_seconds' is
established. A zero is better than the negative value.
[ the only distortion would be to PIDS_TIME_ELAPSED. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the way those 'extents_free_all' guys were coded,
there's no real need to check for a NULL this->extents
before calling 'em. That's how <stat> already does it.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Sometimes the testing sequence would leave a source tree
under procps-ng-(version) which, if update-potfiles was
run, would include these temporary files in the list, causing issues
later.
The script now explicitly ignores those temporary files.
In addition to copyright date, the initial descriptive
line was changed from a generic statement to one which
reflects the specific portion of the proc/ filesystem.
[ such descriptions alternate between 'declarations' ]
[ (h files) & corresponding 'definitions' (c files). ]
Also, a few missing copyright attributions were added.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just ensures that the relatively expensive
ID to name conversions aren't performed unless they're
explicitly requested. It also internalizes those flags
that required the PROC_FILLSTATUS flag to also be set.
[ requiring a caller, in our case pids.c, to provide ]
[ two flags when a single field was the objective is ]
[ wrong & represents a future potential toe-stubber. ]
[ moreover, what's worse is that those two flags are ]
[ seemingly unrelated. but, without both, a SEGV can ]
[ can be expected when a result.str pointer is NULL. ]
[ by contrast, in the master branch those fields are ]
[ arrays which, when set to zeroes, produce an empty ]
[ string. So, there is no abend (but no name either) ]
[ when one of those two required flags were omitted. ]
[ and worth noting, in that branch it's not just one ]
[ caller required to observe a two flag requirement. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit adapts our man page for a new consolidated
'misc.h' header file. Along the way, some descriptions
were shortened, others lengthened and whitespace added
in an effort to (hopefully) improve readability a bit.
[ the #include subdirectory was also corrected while ]
[ rearranging & grouping functions into 3 categories ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the 4 header files removed in the previous patch,
this commit just changes all those obsolete references
to that new consolidated 'misc.h' header file instead.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Prior to this patch, we had four separate header files
dealing with miscellaneous functions. Those four files
were documented in the single man page: procps_misc.3.
Now, we will have just a single header file documented
in a single man page (that is what's called symmetry).
[ and while we're at it, we will shorten that overly ]
[ long struct 'procps_namespaces' name to agree with ]
[ the function naming conventions, e.g. 'procps_ns'. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
The preceding commit made that 'esc_all' function more
efficient by using direct pointer manipulation instead
of an indexed string reference approach within a loop.
This commit applies the same approach to the 'esc_ctl'
function. Now we'll save 12 more iterated instructions
while decreasing the function's code size by 43 bytes.
Signed-off-by: Jim Warner <james.warner@comcast.net>
While this patch has some cosmetic whitespace changes,
more importantly it makes that 'esc_all' function more
efficient. By abandoning the indexed loop approach for
a direct pointer manipulation, we will save 9 iterated
machine instructions, for a total of 33 bytes of code.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The Inspection feature already offered an INSP_SLIDE_1
provision. This patch now offers similar extensions to
variable width column scrolling (assuming SCROLLVAR_NO
isn't defined). Such a provision was useful during the
development of some recent library UTF-8 enhancements.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the restoration of corrupt utf8 multibyte editing
to the library, it's important to establish the proper
locale before calling that 'fatal_proc_unmounted' guy.
He calls the original 'look_up_our_self' who, in turn,
will invoke 'stat2proc' which then calls 'escape_str'.
Once there, it's too late to effect changes to locale.
[ the result would be lots and lots of '?' displayed ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Much of what was represented in the commit message for
the reference shown below was revisited in this patch.
It also means that the assertion in the last paragraph
of that message will only now be true with LANG unset.
[ and forget all the bullshit about not altering any ]
[ kernel supplied data. sometimes we must to avoid a ]
[ corrupt display due to a string we can not decode. ]
And while this commit still avoids the overhead of the
'mbrtowc', 'wcwidth' 'isprint, & 'iswprint' functions,
we achieve all the benefits with simple table lookups.
Plus such benefits are extended to additional strings.
For example, both PIDS_EXE and PIDS_CMD fields are now
also subject to being 'escaped'. If a program name did
contain multibyte characters, potential truncation may
corrupt it when it's squeezed into a 15/63 byte array.
Now, all future users of this new library only need to
deal with the disparities between string and printable
lengths. Such strings themselves are always printable.
[ the ps program now contains some unnecessary costs ]
[ with the duplicated former 'escape' functions. But ]
[ we retain that copied escape.c code for posterity. ]
[ besides, in a one-shot guy it's of little concern. ]
Note: Proper display of some multibyte strings was not
possible at the linux console. It would seem a concept
of zero length chars (like a 'combining acute accent')
is not recognized. Thus the display becomes corrupted.
But if utf8 decoding is disabled (via LANG=), then all
callers will now see '?', restoring correct alignment.
Reference(s):
. Dec 2020, newlib 'escape' logic refactored
commit a221b9084a
Signed-off-by: Jim Warner <james.warner@comcast.net>
