This commit prevents pkill from accepting something like `-1garbage` as
a SIGHUP. The previous code was using atoi() which does not check for
trailing garbage and would parse the above as 1.
Handling numeric signals in signal_option() is not really necessary,
since signal_name_to_number() will recognize numeric signals and parse
them properly using strtol() and checking for trailing garbage. It also
checks that the numeric signals are in the proper range. So all we need
to do is remove the buggy numeric signal handling here.
Tested with `pkill -1garbage sleep`, after this patch it will complain
that "1" is not a valid option, which is the expected.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This makes a command such as `kill -TERM` or `kill -9` fails and prints
usage, instead of silently succeeding.
The behavior is consistent with how `kill` behaves without an explicit
signal, or with the behavior of the `kill` builtin in a shell like bash.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Have skill_sig_option sanitize the command line by properly decrementing
*argc after moving the arguments to remove the -signal one.
One bug caused by this issue was when running `kill -1`, then the code
would interpret -1 as both SIGHUP and as process group -1 and send
SIGHUP to all of them. Or `kill -28` which would send SIGWINCH to
process group -2 (in another bug, the -pgid support only accepts a
single digit, fix for that bug will follow.)
This also reverts commit 7610b3128e ("skill: fix command line with
signal") which worked around this bug in `skill` and also removes the
"sigopt" hack which worked around this bug in `kill`.
The skill_sig_option implementation is compatible with signal_option()
from pgrep.c. I plan to factor them out into a single source file in a
follow up commit, to prevent the duplication.
This commit fixes the issues reported above. I also tested the issues
from commit 7610b3128e, `skill -9 -t pts/0` works as expected, also
tried `kill` with -signal and a number of pids and it worked as
expected.
Also tested that `make check` and `make distcheck` keep working.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
sysctl --system fails when the file /etc/sysctl.conf doesn't
exists. This happens due to wrong check of stat(2) return code.
Reference:
https://www.freelists.org/post/procps/sysctl
Signed-off-by: Craig Small <csmall@enc.com.au>
pwdx doesn't actually use any of the libprocps functions but
it is linked because it is the default. This specific LDADD
removes that unrequired linking.
Please let's stop the nls translation insanity. With a
one time push we can eliminate the dirty tree syndrome
which surfaces with every local build. Later, before a
release, the translations can be updated in final form
then pushed just 1 more time to the gitlab repository.
I'm tired of having to always re-issue this request in
order to circumvent the problem and thus prevent a too
broad commit (not to mention some nasty side effects).
[ bash$ git update-index --assume-unchanged po/??.po ]
Reference(s):
http://www.freelists.org/post/procps/procpsng-translations
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the commit referenced below, the linux version is
no longer available via an external variable. So we'll
eliminate the extra superficial function call employed
at program end as part of a debugging (only) o/p spew.
[ the user will soon be returned to the command line ]
[ & he/she can run their own 'uname -r' if in doubt! ]
Reference(s):
commit 56d9d5e7e7
Signed-off-by: Jim Warner <james.warner@comcast.net>
wish folks (craig) would use these in their .gitconfig
[core]
whitespace = trailing-space, space-before-tab, blank-at-eof
[apply]
whitespace = warn
Signed-off-by: Jim Warner <james.warner@comcast.net>
Added function procps_linux_version() which used to be an
exported integer instead. Also changed the method of obtaining
the linux version (more correctly the os release) to use a specific
procfs entry. This works for both Linux and FreeBSD.
This patch will bring three of our man pages into line
with the recent refactor of the libprocps wchan logic.
[ and also eliminates more damn eol whitespace which ]
[ snuck in our repo with the commit referenced below ]
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
commit cf4788c28d
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.
In addition, this commit eliminates a broken alternate
'namelist' provision which was intended to allow users
to specify a System.map file to be used in translating
addresses into function names. But, the real effect of
the now defunct 'N' and '-n' options was to indirectly
force addresses (not names) to be displayed since such
user named map files could not be successfully parsed.
Besides when the required FRAME_POINTER kconfig option
is absent there is no address to translate and when it
is present /proc/PID/wchan is already translated. Thus
an alternate mapping is unnecessary and inappropriate.
[ we'll forgive POSIX for documenting '-n namelist' ]
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
Signed-off-by: Jim Warner <james.warner@comcast.net>
Several Debian based distributions were recently found
to have omitted a kernel configuration option that had
the effect of rendering /proc/#/stat and /proc/#/wchan
useless for providing any 'sleeping in function' info.
That problem also prompted a reevaluation of the whole
approach to wchan matters which had grown increasingly
complex as our library evolved over the last 13 years.
The net result was a decision to rely on /proc/#/wchan
which arrived along with the 2.5 kernel. This then let
us vastly simplify the internal code plus the external
interface which will benefit both the top and ps pgms.
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11https://lkml.org/lkml/2008/11/6/12https://bugs.debian.org/711592
Signed-off-by: Jim Warner <james.warner@comcast.net>
It doesn't make any sense to have the binary version strings
embedded into the library. The version strings are defined
already either in the Makefile or in include/c.h
[ in addition to the primary 'lxc' business, i found ]
[ numerous apostrophes used instead of that back-tic ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit adds a lxc container name to every proc_t.
If a process is not running in a container, then a '-'
will be provided, making such a field always sortable.
Unlike other proc_t character pointers, lxc containers
will find many duplicate shared values. So rather than
strdup 'em (with a later free required upon reuse), we
try to keep track of those already seen and share that
address among all tasks running within each container.
We rely on the lines in the task's cgroup subdirectory
which may initially seem somewhat unsophisticated. But
the lxc library itself uses a similar approach when it
is called to list active containers. In that case, the
/proc/net/unix directory is parsed for the '/lxc' eye-
catcher, with potential complications from hashed path
and names that are too long (something we don't face).
[ too bad docker abandoned lxc - our commit won't do ]
[ anything for the users of those kind of containers ]
Reference(s):
https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1424253https://bugs.launchpad.net/ubuntu/+source/procps/+bug/1424253
Signed-off-by: Jim Warner <james.warner@comcast.net>
Under a lxc container, the /proc/meminfo 'MemFree' and
'MemAvailable' amounts will be equal, unless memory is
being limited via cgroups in which case 'MemAvailable'
could exceed that for 'MemTotal'. And when a container
has been nested, there exist additional memory quirks.
A program might then display used or available amounts
greater than total memory (assuming unsigned honored),
or negative values (should a signed cast be employed).
This anomaly primarily impacted the top and free pgms.
Thus, two simple sanity checks have been introduced to
avoid any illogical kb_main_available or kb_main_used.
( Busybox top & free also display anomalous although )
( different results when running in a lxc container. )
Reference(s):
https://bugzilla.redhat.com/show_bug.cgi?id=1153817
Signed-off-by: Jim Warner <james.warner@comcast.net>
On some setups the signals count can change and be truncated. You
will notice this because the number will have "<" prepended. The
testsuite didn't handle this.
You could either get:
BLOCKED BLOCKED BLOCKED CAUGHT
CAUGHT CATCHED
0000000000000000 0000000000000000 0000000000000000 00000001f3d1fef9 00000001f3d1fef9 00000001f3d1fef9
or
BLOCKED BLOCKED BLOCKED CAUGHT CAUGHT CATCHED
00000000 00000000 00000000 <f3d1fef9 <f3d1fef9 <f3d1fef9
ps now truncates usernames and doesn't change them to uids.
Man page is now updated with the correct information
Signed-off-by: Craig Small <csmall@enc.com.au>
testsuite would fail if /proc/vmstat was unreadable.
Issue #3 brought up by Mike Frysinger.
test script explicitly checks to see if it is readable and
sets these tests to unsupported if not.
For the test suite, procps used to use sleep which would just
create a process or two to test the tools against. Some setups
coreutils creates all programs including sleep into one blob which
means a lot of the tests fail, see issue #2
procps has its own sleep program now.
It allows to distinguish the initial NAME (to be translated) with the
latter one (that must not be translated) and thus permits to handle its
translation differently.
References: https://bugs.debian.org/786643
Signed-off-by: Craig Small <csmall@enc.com.au>
Recent commit 9742c74e7c ("pgrep: Enable case-insensitive process matching")
caused the "opts" string to overflow the show 32-character space allocated for
it.
Bump it up to 64 bytes, which should be enough even if more options are added.
Tested: Running ./pgrep stopped crashing and `make check` passed.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
build-sys: use proper dependencies on libproc.la
Use `LDADD` or `*_LDADD` instead of `AM_LDFLAGS` to refer to `libproc.la`.
This is recommended in the automake manual:
http://www.gnu.org/software/automake/manual/html_node/Linking.html
Before this commit, parallel builds may break, as there is no explicit dependency to ensure the library is built before the binaries that try to link to it.
Tested by running `make -jNN` repeatedly for different levels of parallelism to ensure the build works. Also checked that `make check` and `make distcheck` still work as expected. Also made sure that a parallel make invocation works with `make -j distcheck`.
Reported-by: Jim Warner <james.warner@comcast.net>
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
See merge request !2
Use LDADD or *_LDADD instead of AM_LDFLAGS to refer to libproc.la.
Otherwise, parallel builds will break as there is no explicit dependency
to ensure the library is built before the binaries that try to link to
it.
v2: Added empty rules lib_test_*_LDADD to remove the dependency on
libproc which is not used by the lib/test_* binaries.
Tested by running `make -jNN` repeatedly for different levels of
parallelism to ensure the build works. Also checked that `make check`
and `make distcheck` still work as expected. Also made sure that a
parallel make invocation works with `make -j distcheck`.
Reported-by: Jim Warner <james.warner@comcast.net>
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
FreeBSD has case-insensitive matching of processes in pgrep and
pkill, which can be super-useful. This patch uncomments and
documents the code needed to make this work.
Signed-off-by: Craig Small <csmall@enc.com.au>
Updated the documents with the following general changes:
* Replaced Gitorious with GitLab
* Moved translate stuff out of README
* Changed plain text to markdown (looks better on website)
Before this commit, the test checking `vmstat -m` (slabinfo) output uses
a fairly strict regular expression that only allows alphanumeric
characters and a few exceptions such as "_", "-", "(" and ")".
However, recent kernels use a wider range of characters, such as ">".
For instance, see this Linux commit which creates a "page->ptl" slab:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/mm/memory.c?id=b35f1819acd9243a3ff7ad25b1fa8bd6bfe80fb2#n4283
Other patches for reporting slab usage per memcg include the names of
the cgroup in the slabinfo output, which can include additional
characters and use dots for abbreviation.
The check should not be so string, instead it could simply look for a
chain of non-whitespace characters and that should be enough.
Tested that `make check` is still working, including in some of the
environments where features that enable the additional slabinfo names.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Craig Small <csmall@enc.com.au>
The current regexp checks for a \s+ in the beginning, however that will
only match if there is a \n in the `ps` output before test-schedbatch,
but that will not happen if test-schedbatch is the first process in the
list, which happens if the PID of test-schedbatch is low enough to bring
it up in the sorted list.
Fix it by enabling newline-sensitive matching with (?n) which then
allows using ^ and $ anchors in the regexp (including an optional \r
introduced by expect.) Matching the end of line also improves checking
that the last field matches 18 exactly and not something like 181, etc.
Tested that `make check` does not break and also fixed the flakiness
seen in an environment with few processes running under the test user
which made the issue more frequent.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Craig Small <csmall@enc.com.au>
Right now the test case is both testing it (expect_pass "$test") and
marking it as untested (untested "$test"), it should do either one or
the other, so stop marking it as untested.
Before this change, these lines appear in testsuite/ps.log or the output
of `make check RUNTESTFLAGS="--all"`:
PASS: ps SCHED_BATCH scheduler
UNTESTED: ps SCHED_BATCH scheduler
Note that the second line is confusing, it's implying that the test is
untested, right after having tested it and indicated it passes.
After this change, only the first line will appear.
Tested that both `make check` and `make distcheck` continue working with
this commit.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Craig Small <csmall@enc.com.au>
On most systems the only process with a SID=1 is init
and certainly not a test sleep. On docker systems this
test program IS on SID=1 and so our "impossible SID" becomes
possible.
The ps sched test has been disabled. There are too many
odd build farms this fails in strange ways.
Other odd build farms have no tty and so some tests check
for no tty and skip if not found.
