Commit Graph

354 Commits

Author SHA1 Message Date
Qualys Security Advisory
6f7d610621 0061-ps/output.c: Always null-terminate outbuf in show_one_proc().
Before "strlen(outbuf)", if one of the pr_*() functions forgot to do it.
This prevents an out-of-bounds read in strlen(), and an out-of-bounds
write in "outbuf[sz] = '\n'". Another solution would be to replace
strlen() with strnlen(), but this is not used anywhere else in the
code-base and may not exist in all libc's.

---------------------------- adapted for newlib branch
. adapted via 'patch' without rejections

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
c5bbe00770 0060-ps/output.c: Protect outbuf in various pr_*() functions.
pr_bsdstart(): Replace "strcpy(outbuf," with "snprintf(outbuf, COLWID,"
(which is used in all surrounding functions). (side note: the fact that
many pr_*() functions simply return "snprintf(outbuf, COLWID," justifies
the "amount" checks added to show_one_proc() by the "ps/output.c:
Replace strcpy() with snprintf() in show_one_proc()." patch)

pr_stime(): Check the return value of strftime() (in case of an error,
"the contents of the array are undefined").

help_pr_sig(): Handle the "len < 8" case, otherwise "sig+len-8" may
point outside the sig string.

pr_context(): Handle the empty string case, or else "outbuf[len-1]"
points outside outbuf.

---------------------------- adapted for newlib branch
. logic is quite different with 'stacks' vs. 'proc_t'

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
0bd44bc76e 0059-ps/output.c: Enforce a safe range for max_rightward.
Enforce a maximum max_rightward of OUTBUF_SIZE-1, because it is used in
constructs such as "snprintf(outbuf, max_rightward+1," (we could remove
the extra check at the beginning of forest_helper() now, but we decided
to leave it, as a precaution and reminder).

The minimum max_rightward check is not strictly needed, because it is
unsigned. However, we decided to add it anyway:

- most of the other variables are signed;

- make it visually clear that this case is properly handled;

- ideally, the minimum max_rightward should be 1, not 0 (to prevent
  integer overflows such as "max_rightward-1"), but this might change
  the behavior/output of ps, so we decided against it, for now.

Instead, we fixed the only function that overflows if max_rightward is
0. Also, enforce the same safe range for max_leftward, although it is
never used throughout the code-base.

---------------------------- adapted for newlib branch
. adapted via 'patch' without rejections

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
d9eb77bd68 0058-ps/output.c: Replace strcpy() with snprintf() in show_one_proc().
This strcpy() should normally not overflow outbuf, but names can be
overridden (via -o). Also, check "amount" in all cases.

---------------------------- adapted for newlib branch
. we don't use that 'likely/unlikely' crap in newlib

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
15c7fa7aba 0057-ps/output.c: Remove the page_shift variable.
It is static and not used anywhere.

---------------------------- adapted for newlib branch
. limited to whitespace/formatting differences

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
70351dd781 0056-ps/output.c: Check return value of mmap() in init_output().
We decided not to check the return value of the mprotect() calls,
because they are not vital to the operation of ps.

---------------------------- adapted for newlib branch
. many formatting/whitespace differences

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
5d7e7cf468 0055-ps/display.c: Harden show_tree().
1/ Do not go deeper than the size of forest_prefix[], to prevent a
buffer overflow (sizeof(forest_prefix) is roughly 128K, but the maximum
/proc/sys/kernel/pid_max is 4M). (actually, we go deeper, but we stop
adding bytes to forest_prefix[])

2/ Always null-terminate forest_prefix[] at the current level.

---------------------------- adapted for newlib branch
. logic is quite different with 'stacks' vs. 'proc_t'
. a commented out 'debug' line was no longer present

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
67c1ec4685 0054-ps/output.c: Fix outbuf overflows in pr_args() etc.
Because there is usually less than OUTBUF_SIZE available at endp.

---------------------------- adapted for newlib branch
. logic is quite different with 'stacks' vs. 'proc_t'
. ps no longer deals with the library 'FILL...' flags

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
43c4d553e6 0053-ps/output.c: Harden forest_helper().
This patch solves several problems:

1/ Limit the number of characters written (to outbuf) to OUTBUF_SIZE-1
(-1 for the null-terminator).

2/ Always null-terminate outbuf at q.

3/ Move the "rightward" checks *before* the strcpy() calls.

4/ Avoid an integer overflow in these checks (e.g., rightward-4).
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
9caf95c0bd 0052-ps/output.c: Handle negative snprintf() return value.
May happen if strlen(src) > INT_MAX for example. This patch prevents
escaped_copy() from increasing maxroom and returning -1 (= number of
bytes consumed in dst).

---------------------------- adapted for newlib branch
. formerly applied to proc/escape.c
. function was moved to ps/output.c

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Qualys Security Advisory
f44fe715bd 0048-ps/output.c: Make sure all escape*() arguments are safe.
The SECURE_ESCAPE_ARGS() macro solves several potential problems
(although we found no problematic calls to the escape*() functions in
procps's code-base, but had to thoroughly review every call; and this is
library code):

1/ off-by-one overflows if the size of the destination buffer is 0;

2/ buffer overflows if this size (or "maxroom") is negative;

3/ integer overflows (for example, "*maxcells+1");

4/ always null-terminate the destination buffer (unless its size is 0).

---------------------------- adapted for newlib branch
. formerly applied to proc/escape.c
. function was moved to ps/output.c

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Jim Warner
f0b245c794 ps: move other initialization code after setREL macros
While the previous patch concerned an essential change
to avoid dereferencing those NULL pointers, this patch
could be considered optional. For consistency, it just
puts all initialization logic after the setREL macros.

[ plus along the way some inter-function spacing was ]
[ standardized with just a single blank line between ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Jim Warner
26ab9ae143 ps: ensure functions not called prior to setREL macros
Under newlib design, ps must loop though all potential
print functions so as to gather the appropriate enum's
while establishing the 'relative' equivalent. The keys
to the setREL/chkREL macros are a NULL 'outbuf' param.

It's imperative that no other functions be called with
that NULL value. Unfortunately, several instances were
found where this was violated. They are now corrected!

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Jim Warner
292a4dd6fa ps/output.c: eliminate one irritating compiler warning
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-09 21:45:38 +10:00
Sébastien Bigaret
5329984b2e ps: add times & cputimes format specifiers: cumulative CPU time in seconds
These format specifiers are to time & cputime what etimes is to etime.

Signed-off-by: Sébastien Bigaret <sebastien.bigaret@telecom-bretagne.eu>

References:
 procps-ng/procps!43
2018-03-02 22:19:40 +11:00
Jim Warner
22887a61e1 ps: changed to exploit a newly added UID used at login
This patch represents a newlib adaptation of the merge
request offered by Jan Rybar that is referenced below.

Reference(s):
https://gitlab.com/procps-ng/procps/merge_requests/57
https://bugzilla.redhat.com/show_bug.cgi?id=1518986

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-02-19 20:33:59 +11:00
Craig Small
91df65b9e7 docs: Document I idle state in ps and top
Linux 4.2 provided a new process state of I which is used for an idle
kernel thread. This new state means that kernel threads do not
contribute to the loadavg as they are no longer state D or S but I.

While both ps and top displayed this state, it wasn't documented in
either manual page until now.

References:
 https://bugs.debian.org/886967
 https://www.quora.com/What-does-mean-Linux-process-state-I-in-the-top-output
 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=80ed87c8a9ca0cad7ca66cf3bbdfb17559a66dcf
2018-01-13 11:25:59 +11:00
Jim Warner
9ea0021070 ps: don't use '+' truncation indicator with multi-byte
The ps program generally supports multi-byte sequences
in strings representing user and group names. However,
should a multi-byte sequence span the maximum width of
a column, the '+' inserted by ps to signify truncation
will corrupt that sequence, misaligning the text line.

Unfortunately, there's insufficient info returned from
the escape_str function (who calls escape_str_utf8) to
provide a robust response. So, this commit will revert
to the old standby of displaying a number when the '+'
character would've corrupted that multi-byte sequence.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-10-02 22:23:13 +11:00
Jim Warner
fd95a61652 ps: have now added the NUMA node field display support
Reference(s):
https://gitlab.com/procps-ng/procps/issues/58

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-05-22 21:38:10 +10:00
Jim Warner
618a813baa misc: eliminate all those remaining gcc -Wall warnings
Reference(s):
proc/readproc.c: In function 'statm2proc'
proc/readproc.c:600:9: warning: variable 'num' set but not used [-Wunused-but-set-variable]

proc/stat.c: In function 'stat_derive_unique':
proc/stat.c:429:1: warning: no return statement in function returning non-void [-Wreturn-type]

ps/parser.c: In function 'arg_type':
ps/parser.c:1098:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
ps/parser.c:1099:34: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'

lib/signals.c: In function 'strtosig':
lib/signals.c:243:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
lib/signals.c:245:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'

slabtop.c: In function 'print_summary':
slabtop.c:223:29: warning: unused variable 'stats' [-Wunused-variable]

watch.c: In function 'process_ansi':
watch.c:232:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
watch.c:235:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-05-22 21:38:10 +10:00
Jim Warner
66e8e2723d ps: finish purging those references to PIDS_WCHAN_ADDR
Aw shucks, not all support for this defunct enumerator
was removed via the commits shown below (but, is now).

[ what remained were just variables named after that ]
[ deprecated/deleted enumerator, but still & all ... ]

[ plus, i have left the doc/libproc.3 file untouched ]
[ since it already appears badly out of date anyway! ]

Reference(s):
. ps references partially purged
commit 66c4024d75
. enumerator purged from library
commit 912075605b

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-01-04 08:29:44 +11:00
Jim Warner
1c0d54e963 ps: now made responsive to 32 or 64-bit address widths
While a Debian bug report referenced below was limited
to the 'eip' and 'esp' fields, this patch also extends
address width adaptations to some other addresses too.

[ and, we do so in a far less invasive manner than a ]
[ redhat approach shown below adding two new fields! ]

Reference(s):
. new debian bug report
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=846361
. old redhat solution
https://bugzilla.redhat.com/show_bug.cgi?id=244152

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-12-07 22:07:00 +11:00
Martin Polednik
b3e8581a30 ps: recognize SCHED_DEADLINE 2016-11-21 21:56:37 +11:00
Jim Warner
66c4024d75 ps: respond to loss of that PIDS_WCHAN_ADDR enumerator
No longer will ps print nwchan as 'ffffff', '-' or '1'
since the proc/PID/stat wchan field didn't represent a
real address anyway. Rather, the field will henceforth
output a dash ('-'), the ps customary 'not available'.

That man document was also tweaked to better represent
actual behavior. An asterisk ('*') was never shown for
threaded tasks and that dash ('-') usually didn't mean
running tasks (sometimes associated with permissions).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-10-16 08:23:38 +11:00
Jim Warner
86992bb58f ps: respond to loss of fields obsoleted with linux 2.6
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-10-09 21:31:29 +11:00
Thomas Petazzoni
686550b305 ps/output.c: include <dlfcn.h> only when necessary
dlopen() functionality is only used when SELinux support is enabled, so
<dlfcn.h> only needs to be included when ENABLE_LIBSELINUX is
defined. This fixes the build in configurations where <dlfcn.h> is not
available.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-15 21:10:30 +10:00
Jim Warner
105058ae2d related: fix inconsistencies in result type references
This patch is a response to errors found in those type
references now that our library allows for validation.

In two cases, former assignments to a result structure
could no longer employ that VAL macro if validation is
active. Thus, direct reference to some stack was used.

For the record, those instances were to be found here:
. ps - uses PIDS_extra to store the cooked pcpu values
. top - uses PIDS_extra to store the forest view level

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-08-07 21:40:48 +10:00
Jim Warner
e0515e23e7 related: respond to VAL macro addition of context parm
Since the VAL macro now requires a 4th parameter, this
commit simply adds the 'info' context structure to it.

In some cases, that context structure needed to become
global, since it was referenced in multiple functions.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-08-07 21:40:48 +10:00
Jim Warner
51aef8f769 related: adapt for changes in result types, <PIDS> api
This patch is the response to changes in <pids> types.

These additional modifications were also incorporated.

. ps -------------------------------------------------
pr_wname was eliminated as it just duplicated pr_wchan
pr_wchan referenced WCHAN_ADDR in error, vs WCHAN_NAME
pr_nwchan referenced WCHAN_NAME, not proper WCHAN_ADDR

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-08-01 20:09:18 +10:00
Jim Warner
612f36189e related: change for lost 'PROCPS_' enumerator prefixes
With this patch we've completed a progression toward a
standard approach to naming conventions which follows:

* Only functions will begin with that 'procps_' prefix
. ........................................... examples
. procps_vmstat_get ()
. procps_diskstats_select ()
- ----------------------------------------------------

* Exposed structures begin with the module/header name
. ........................................... examples
. struct pids_info
. struct stat_reaped
- ----------------------------------------------------

* Item enumerators begin like structs, but capitalized
. ........................................... examples
. VMSTAT_COMPACT_FAIL
. MEMINFO_DELTA_ACTIVE

[ slabinfo varies slightly due to some item variants ]
. SLABINFO_extra
. SLABS_SIZE_ACTIVE
. SLABNODE_OBJS_PER_SLAB
[ could cure with a prefix of SLABINFO, but too long ]
- ----------------------------------------------------

* Other enumerators work exactly like item enumerators
. ........................................... examples
. PIDS_SORT_ASCEND
. STAT_REAP_CPUS_AND_NODES
- ----------------------------------------------------

* Macros and constants begin just like the enumerators
. ........................................... examples
. #define SLABINFO_GET
. #define DISKSTATS_TYPE_DISK
- ----------------------------------------------------

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-26 20:49:44 +10:00
Jim Warner
d7cbf3448f related: adapt to changes in 'context' structure names
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-26 20:47:50 +10:00
Jim Warner
338166df57 misc: just eliminate several 'unused' warning messages
[ plus we also play catch up on some earlier changes ]
[ that impacted skill.c, after using --enable-skill! ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-26 07:59:48 +10:00
Jim Warner
a2c79b6237 misc: adapt others to struct layout change, <PIDS> api
With the change to struct pids_fetch, we'll just trade
some dot ('.') code for some pointer to ('->') syntax.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-06-28 21:11:25 +10:00
Jim Warner
428ef496a6 misc: adapt others to the changes in 'get' return type
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-06-21 20:58:09 +10:00
Jim Warner
5f2570c384 misc: adapt pgms to pids_sort_order change, <PIDS> api
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-06-09 20:51:06 +10:00
Jim Warner
911083bf76 ps+top: adapt for changes in results types, <PIDS> api
I've got nothing to add to the commit message but that
doesn't mean I won't produce perfectly justified text.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-16 19:58:20 +10:00
Jim Warner
56def1cbac misc: adapt others to changes in interface, <PIDS> api
I've got nothing to add to the commit message but that
doesn't mean I won't produce perfectly justified text.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-16 19:58:20 +10:00
Jim Warner
78043f6751 ps: ensuring procps_meminfo_new success, <MEMINFO> api
The 'new' function requires a NULL context pointer, so
when existing code worked, it was just a case of luck.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-12 21:13:47 +10:00
Craig Small
201208cbc1 ps: Output of nwchan is a number
For some time with enough compilier flags I have watched the
following warning drift by:
ps/output.c: In function ‘pr_nwchan’:
ps/output.c:658:41: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
   return snprintf(outbuf, COLWID, "%x", (unsigned)rSv(WCHAN_NAME, str, pp));

nwchan is supposed to be the address of where the process is sleeping,
not the name. Besides %x is a hex number not a string hence the warning.

nwchan now prints the address, in hex and GCC is happy.
2016-05-12 20:43:49 +10:00
Jim Warner
d94af0d07a misc: adapted other programs to changes, <MEMINFO> api
This patch just brings *most* other programs into line
with those changes recently made in the <meminfo> API.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-12 07:51:10 +10:00
Jim Warner
21360027e5 misc: adapt additional programs to changes, <STAT> api
This patch brings the ps program (very small impact) &
that vmstat program (major impact) into agreement with
the new <stat> API. In the case of the latter guy, the
many separate calls to 'get' should be replaced by one
single 'select' call obtaining all data in one stroke.

[ but, i was too tired to undertake that enhancement ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-08 21:12:22 +10:00
Craig Small
6b5cb345c5 library: procps_uptime() return value is a status
procps_uptime, previously just plain uptime() used to put the
uptime (as a double) in the first argument and return uptime
(as an int).

It meant if you ran
 myuptime2 = procps_uptime(&myuptime1, NULL);
You might get different results for myuptime1 and myuptime2 because
they are different types.

Most library calls use the return value to return the status,
procps_uptime was in the middle.

Until now.

This function will return 0 on success. If you want (for whatever
reason) uptime as an int then cast it.

All of the procps binaries didn't use the return value for uptime
except ps which set a variable to it but never used it anywhere.
2016-05-01 16:50:25 +10:00
Jim Warner
714ea69c6d misc: adapt others to a changed identifier, <pids> API
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-04-19 20:38:18 +10:00
Craig Small
d916d5db86 library: re-arrange escape commands
escaped_copy(): only appears in ps, moved to ps/output.c
escape_strlist() only used in escape.c made static
escape_command() used in library, made internal
procps.h no longer includes escape.h

escape_str() used by library and ps so needs to be exported
definition put into procps.h including the odd define required.
Far from ideal to have it this way, will look at it another time
to have it all in, all out or split nicer so its not in the API;
perhaps a lib/ file?
2016-04-17 14:45:19 +10:00
Craig Small
ccb6ae8de1 library: cleanup of library includes
The includes used to define a lot of things a library include
should not. It was also a bit messy what was exposed in the library
and what was not.

get_pid_digits -> procps_pid_length and exported correctly

MALLOC attribute move into relevant .c files
NORETURN attribute moved to relevant .c, not used in library
PURE attribute removed, it wasn't used
KLONG/KLF/STRTOUKL were fixed for long, so now just use long

HIDDEN attribute removed. It was for 3 functions. The PROCPS_EXPORT
seems to do the same (opposite) thing.

likely/unlikely removed from most places, its highly debateable
this does anything useful as CPUs have gotten smarter about branches.

Re-arranged the includes, ALL external programs should just #include
<proc/procps.h> then proc/procps.h includes headers for files that
have exported functions. procps.h and the headers it includes should
not use items that are not exportable (e.g. hidden functions or
macros) they go in procps-private.h
2016-04-16 17:03:57 +10:00
Laurent Bigonville
828540578c ps: use attr/current as fallback for context
If SELINUX is enabled but the machine is using another MAC system
(like apparmor), ps will fallback to just parsing
"/proc/%d/attr/current", otherwise the label/context would not
be properly displayed in that case.

References:
 https://bugs.debian.org/786956

Signed-off-by: Craig Small <csmall@enc.com.au>
2016-04-16 07:44:31 +10:00
Craig Small
471cf4cd36 Merge branch 'master' into newlib
Conflicts:
	pgrep.c
	proc/sysinfo.c
	ps/output.c
	skill.c
	top/top.c
	top/top.h
	w.c
2015-10-28 21:09:26 +11:00
Craig Small
b2f49b105d Closes: #9 ps: Remove Unix98 output limitations
ps previously followed the Unix98 standard when it comes to
user-defined output, sometimes. This meant you could have
user output format with a header that included commas and
equals signs. It was dependent on if ps thought you wanted
sysv or bsd format and THAT was dependent on things in previous
options.

It was very confusing to a user because
 ps p $$ -o pid=,comm=
gave you a two-column output but
 ps -p $$ -o pid=,comm=
would give you a one column output with the header ",comm="

The -p versus p means (to ps) you want sysv or bsd parsing.
Unix98 standard or not, this is plainly just silly.

The commit removes any of the quirks Unix98 has with user defined
output.  If you really wanted a ps header with commas in the output,
today isn't your day.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-10-26 11:18:52 +11:00
Jim Warner
cfd47f710a ps: exploits <pids> enhancement for control group name
[ but stay tuned! there is a commit coming soon that ]
[ represents a rather major internal redesign, which ]
[ was prompted by the ps and top adaptation testing. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:49:38 +11:00
Jim Warner
d53e98ff97 misc: adapt ps & top to procps_pids_stacks_sort rename
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-14 21:47:19 +11:00
Craig Small
03b148d517 ps: display control group name
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.

This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.

Signed-off-by: Craig Small <csmall@enc.com.au>

Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 0ee090ae16
2015-10-14 21:34:37 +11:00
Jim Warner
99a657b365 ps: miscellaneous accumulated changes to comments only
With the conversion to the new <pids> interface, a few
comments (only) are being adjusted, as detailed below.

. Escapes '\' crept into some comments containing '|'.

. For consistency, add '.' dot qualifier to a comment.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-09 21:33:51 +11:00
Jim Warner
584028dbe5 ps: exploit those new <pids> task/threads capabilities
This commit represents the ps transition to the <pids>
'stacks' interface. While an effort to minimize impact
on existing code was made (as with a disguised proc_t)
the changes were still extensive. Along the way, a few
modifications beyond simply conversion were also made.

------------------------------------------------------
Here's a brief overview the design of this conversion:

. The need to satisfy relative enum requirements could
not easily have been made table driven since any entry
in the format_array might require several <pids> items
in support. So I decided to allow every print function
to contribute its own relative enums once the decision
as to exactly what will be printed had been finalized.

. A similar approach was taken for sorting, since it's
possible to have sort keys that will not be displayed.
Here, I relied on the existing print extensions above.

. In summary, just prior to printing ps walks thru two
lists one time (the format_list & sort_list) and calls
each print function. That function does not print, but
sets its required enum if necessary. Later, when those
same functions are called repeatedly for every printed
line, the only overhead will be an if test and branch.

------------------------------------------------------
Below is a summary of major changes beyond conversion:

. Sorts are now the responsibility of the library. And
therefore the total # of sortable fields substantially
increased without effort. Additionally, several quirky
fields remain as sortable, even though they can't ever
be printed(?). Surely that must make sense to someone.

[ while on this subject of sort, please do *not* try ]
[ to sort old ps on 'args'. or better yet, if you do ]
[ try that sort, see if you can determine his order, ]
[ without peeking at the source. that one hurts yet! ]

. All logic dealing with the old openproc flags and ps
struct members known as 'need' have been whacked since
that entire area was solely the new library's concern.

. Remaining malloc/calloc calls to stdlib were changed
to xmalloc/xcalloc from our own include/xalloc.h file.
None of the replaced calls ever checked return values.

[ be aware that 2 minor potential memory leaks exist ]
[ depending on command line arguments. no attempt is ]
[ made to free dynamically acquired format/sort node ]
[ structures upon return; a conscious design choice. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-05 21:52:08 +11:00
Craig Small
a61f78d6e0 library: rework namespace calls
Functions related to namespaces were half-in half-out of the
procps library and didn't fit the standard naming scheme.

While struct { long ns[x]} is a bit clunky, its the only way
to "lock in" x. The alternative is to use ns_* variables.

This work was needed before pgrep could be converted.
2015-09-03 22:32:19 +10:00
Craig Small
0ee090ae16 ps: display control group name
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.

This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-15 17:10:38 +10:00
Craig Small
4bd0e539af ps: sort by cgroup
A rather small fix to sort by cgroup. This sorting function
could be used for other string vector entries, but I can't
see why you want to for, say, environment.

Reference:
 https://bugs.debian.org/692279

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-15 16:23:37 +10:00
Craig Small
313f936739 ps: enable sort by etimes
ps has two columns showing the same data which is elapsed time, just
the format is changed:
 etimes - elapsed time in seconds
 etime  - elapsed time in DD-hh:mm:ss

ps used to only sort by etime but not etimes, by making etimes
and alias of etime for sorting both flags work.

References:
 https://bugs.debian.org/794619

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-06 22:08:13 +10:00
Jim Warner
2ceb4c31da library: readstat redesigned using 'stack' vs. 'chain'
In addition to that text shown below the line which is
common to several commit messages, this patch contains
several minor changes with lessor impact upon the API:

. A call to procps_stat_read_jiffs() has been added to
those jiffs functions carrying the 'fill' nomenclature
to parallel like functions in some of our other files.

. The #include header files are ordered alphabetically
now, with all those <sys/??> types separately grouped.

. Standard copyright boilerplate was added in .c file.

. The header file follows the conventions of indenting
(by 4 spaces) those parameters too lengthy for 1 line.

------------------------------------------------------
. The former 'chains' have now become 'stacks' without
the 'next' pointer in each result struct. The pointers
initially seemed to offer some flexibility with memory
allocations and benefits for the library access logic.
However, user access was always via displacement and a
a statically allocated chain was cumbersome to define.

. An enumerator ending in '_noop' will no longer serve
as a fencepost delimiter. Rather, it has become a much
more important and flexible user oriented tool. Adding
one or more such 'items' in any items list passed into
the library becomes the means of extending the 'stack'
to also include user (not just library) data. Any such
data is guaranteed to never be altered by the library.

. Anticipating PID support, where many different types
must be represented in a result structure, we'll adopt
a common naming standard. And, while not every results
structure currently needs to reflect disparate types a
union will be employed so the same dot qualifier ('.')
can be used consistently when accessing all such data.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-23 22:31:39 +10:00
Jim Warner
e88b11f176 library: normalize the readstat context structure name
The new library meminfo & vmstat modules use structure
names for their context which exactly mirror the names
of the very /proc/ files whose particulars they yield.

The one exception to this rule was the readstat module
whose struct was named statinfo yet the file was stat.

This commit simply renames that structure (only) so as
to hopefully establish such a naming convention as our
standard going forward. And, it's makes good symmetry.

[ this module's name itself is just perfect as it is ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-01 21:30:58 +10:00
Jim Warner
faf6d4dc93 library: the uref functions were insufficiently robust
The earlier attempt at protecting these functions from
already freed memory worked just fine until the memory
was, in fact, reused by the OS. At that point, the ref
count would most likely fail an existing a test for 0.

So this commit will take control of the 'info' pointer
and force it to NULL when a reference count reaches 0.

Plus, since it makes little sense returning an address
that a caller already has, henceforth we will return a
reference count out of the 'ref' and 'unref functions.

Reference(s):
commit 74beff80ff

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-01 21:30:17 +10:00
Craig Small
639daf5468 library: Update uptime calls to standard format
Changed all the uptime related functions to use the
standard naming procps_uptime_*
2015-06-29 22:09:59 +10:00
Craig Small
56399212c8 library: Remove signal name from library
Procps library previously held functions that were about either
listing or finding signal names. These are not really the right
location for a library about reading procfs.

This patch handles signal related functions in two ways:

For functions purely found in skill, these have been moved back
into this binary as they are used nowhere else.

For functions used across the binaries, these have been moved
into include/signals.h and lib/signals.c. Besides formatting,
these functions are largely the same.

To assist the skill functions, two functions to access the
signal map array have been added to lib/signals.c
2015-06-29 21:52:51 +10:00
Jim Warner
6bb1a033b4 library: tweak formatting for readstat header and code
This patch mostly just eliminates darn tab characters.

Plus the library function declarations and definitions
have been standardized. Most visibly, the input params
now have all been indented on their own separate line.

The following names were changed to more closely match
meminfo.c or provide a certain symmetry. Unfortunately
that also impacted some other pgms which were updated.

. 'procps_stat_get' evolved into 'procps_stat_get_sys'
. 'procps_stat_info' is now known as 'procps_statinfo'

[and just a little trailing whitespace was eliminated]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-29 21:29:49 +10:00
Craig Small
cbf25b93e3 library: more mem and stat fixes
Make distcheck now succeeds.
Changed some of the binaries to use the new API.
2015-06-26 22:37:29 +10:00
Craig Small
56d9d5e7e7 library: Change linux version
Added function procps_linux_version() which used to be an
exported integer instead.  Also changed the method of obtaining
the linux version (more correctly the os release) to use a specific
procfs entry. This works for both Linux and FreeBSD.
2015-06-19 21:00:46 +10:00
Jim Warner
3600f652e8 documentation: fix man pages due to refactor for wchan
This patch will bring three of our man pages into line
with the recent refactor of the libprocps wchan logic.

[ and also eliminates more damn eol whitespace which ]
[ snuck in our repo with the commit referenced below ]

Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
commit cf4788c28d

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-19 19:09:21 +10:00
Jim Warner
caeebdc71f ps: exploit the simplified library interface for wchan
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.

In addition, this commit eliminates a broken alternate
'namelist' provision which was intended to allow users
to specify a System.map file to be used in translating
addresses into function names. But, the real effect of
the now defunct 'N' and '-n' options was to indirectly
force addresses (not names) to be displayed since such
user named map files could not be successfully parsed.

Besides when the required FRAME_POINTER kconfig option
is absent there is no address to translate and when it
is present /proc/PID/wchan is already translated. Thus
an alternate mapping is unnecessary and inappropriate.

[ we'll forgive POSIX for documenting '-n  namelist' ]

Reference(s):
http://www.freelists.org/post/procps/WCHAN,11

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-19 19:09:20 +10:00
Craig Small
505f257a8c library: remove procps_version functions
It doesn't make any sense to have the binary version strings
embedded into the library. The version strings are defined
already either in the Makefile or in include/c.h
2015-06-18 22:37:24 +10:00
Jim Warner
6577371919 ps: update man document to support LXC container names
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-14 15:36:06 +10:00
Jim Warner
f9e27afeb2 ps: add code to exploit the new library LXC containers
Reference(s):
https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1424253
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/1424253

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-14 15:36:06 +10:00
Peggy Russell
cf4788c28d ps.1: usernames are truncated
ps now truncates usernames and doesn't change them to uids.
Man page is now updated with the correct information

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-06-13 16:54:23 +10:00
Filipe Brandenburger
c1c73c0d00 build-sys: merge automake subdirs into toplevel
This will be required for subdir-objects, otherwise automake will have
problems with more than one Makefile.am having rules to build the same
files.

Tested that it builds and both `make check` and `make distcheck` work.

Tested `make install` and compared the tree with the one installed
before this commit, both installed the binaries to the same locations.
The binaries are also in the same location in the build tree (for
instance, ps/pscommand is still there.)

Checked the binaries for the correct libraries linked into them. Binary
sizes matched before and after this change.

Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-01 23:19:31 -07:00
Filipe Brandenburger
90cc5460aa build-sys: add $(top_srcdir) to include search dir
This is required for out-of-tree build to work, since many source files
include e.g. proc/*.h which is not under the include/ directory.

Tested that `make distcheck` starts working after this patch.

Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-01 17:09:55 -07:00
Michael Forney
007c438148 Also emulate error_at_line if not present 2014-08-28 13:54:24 +02:00
Jim Warner
bcbc3c5a02 misc: result after checking all files for misspellings
Reference(s):
https://github.com/lyda/misspell-check.git

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-08-08 22:14:21 +02:00
Jim Warner
93d37cf57a ps: exploit library systemd support vs. internal logic
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-17 13:31:06 +02:00
Jim Warner
d187304854 ps: clarify which options depend on systemd in man doc
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-17 13:31:06 +02:00
Jaromir Capik
e751606fcc ps: add -q/q/--quick-pid option
This commit introduces a new option q/-q/--quick-pid
to the 'ps' command. The option does a similar job
to the p/-p/--pid option (i.e. selection of PIDs
listed in the comma separated list that follows
the option), but the new option is optimized
for speed.
In cases where users only need to specify a list
of PIDs to be shown and don't need other selection
options, forest type output and sorting options,
the new option is recommended as it decreases
the initial processing delay by avoiding reading
the necessary information from all the processes
running on the system and by simplifying
the internal filtering logic.
2014-07-10 21:24:19 +02:00
Jaromir Capik
411d218793 docs: distinguish between T/t in the ps.1 manual 2014-07-02 16:23:30 +02:00
Jim Warner
9e4986f4ea ps: correct some man document deficiencies/aberrations
. a 'space' misinterpreted as the continuation request
. continuation character, resulting in a concatenation
. 2 missing fields inadvertently omitted from man page

Reference(s):
. bug report regarding missing fields
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/115016

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-28 06:53:19 +10:00
Jim Warner
ada443268e misc: fix man doc spelling and grammar for translation
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Yuri Chornoivan
2ec9f5c22e Minor i18n fixes
Minor fixes that the translator (Yuri) has found in some of the
strings. You only know how many typos and thinkos you have when
someone is trying to translate it.

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-03-03 21:58:56 +11:00
Craig Small
8e7ef322e2 Update help files
Benno Schulenberg suggested some changes to the help messages
to provide some consistency and clarity for both the users and
translators of procps.

The test needed to be updated as the pmap output changed too.

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-02-02 18:13:01 +11:00
Craig Small
d06aaaaf2b ps: ignore SIGCONT
SIGCONT is a continue signal.  It seems that some zsh setups can send
this signal, causing ps to abort.  This is not what "continue" means.
This change just uses the default handler which will continue a stopped
process.

References:
  http://bugs.debian.org/732410
  http://www.zsh.org/cgi-bin/mla/redirect?WORKERNUMBER=32251

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-01-14 22:23:58 +11:00
Craig Small
8a38cd5eb4 Split help lines to help translators
To assist translators, the help lines are split so that each translation
chunk has one option. This gives bonus of if we add or change an option,
only that option remains untranslated rather than the entire help block.

Reference:
  http://www.freelists.org/post/procps/procpsng-for-Translation-Project,1

Signed-off-by: Craig Small <csmall@enc.com.au>
2013-12-28 09:25:39 +11:00
Lukas Nykryn
d66ed3350e ps: possibility to display slice unit for a process
Library systemd-login offers possibility to display
name of a systemd slice unit for specific pid.

This patch adds output option "slice" which will
show name of systemd slice unit.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-10-16 15:18:08 +02:00
Craig Small
dd6f24dbed Merge commit 'refs/merge-requests/13' of git://gitorious.org/procps/procps into merge-requests/13
Conflicts:
	pgrep.c
	ps/output.c
	ps/ps.1
2013-09-11 21:34:05 +10:00
Jim Warner
7c4894dd22 ps: address a potential 'newline' quirk the libselinux
Sometimes with libselinux present but SELinux inactive
the context reported is "unconfined" which contains an
embedded newline. This then causes misalignment of any
subsequent data. So, ps will now protect against that.

Reference(s):
http://www.freelists.org/post/procps/enablelibselinux-switch,14

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-08-09 17:58:52 +02:00
Jaromir Capik
5f663aee47 ps: making the libselinux support configurable
Previously the libselinux support was present
in the sources, but disabled with a preprocessor
condition (#if 0).
From now the libselinux support can be enabled with
the --enable-libselinux switch available
in the configuration script. That way is more
flexible than local patches modifying the condition
value from 0 to 1.
2013-08-07 17:52:38 +02:00
Václav Pavlín
39c6de4c87 ps: remove sd_ prefix from systemd output options
ps : This patch removes sd_ prefix from recently added systemd output options
to let them look more tied with the system.

Patch does not change behaviour of these options, only modifies their
representation to user.
2013-05-22 14:55:40 +02:00
Lukas Nykryn
7b50c2e918 ps: possibility to display seat for a process
Library systemd-login offers possibility to display
name of seat for a session on multi-seat systems.

This patch adds output option "sd_seat" which will
show name of seat or "-", when name of seat can not
be determined, but "seat0" should always exist.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
38e8087d55 ps: possibility to display systemd user unit for a process
Library systemd-login offers possibility to display
name of systemd user unit for specific pid. Note that not all
processes are part of a user unit.

This patch adds output option "sd_uunit" which will
show name of user unit or "-", when process does not belong
to any user unit. This is similar to "sd_unit" but applies
to user units instead of system units.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
4c1536d5f1 ps: possibility to display machine name for a process
Library systemd-login offers possibility to display
the name of the VM or container which process belongs to.

This patch adds output option "sd_machine" which will
show machine name or "-" when the name can not be determined.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
785776c10d ps: possibility to display uid of session owner for a process
Library systemd-login offers possibility to display the Unix
user identifier of the owner of the session of a process.
This information will also be displayed for user processes which
are shared between multiple login sessions of the same user,
where sd_session will be blank.

This patch adds output option "sd_ouid" which will show
user UID or "-", when there is no owner for a process.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
716d96b8eb ps: possibility to display login session for a process
Library systemd-login offers possibility to display name
of login session for specific pid.
Note that not all processes are part of a login session
(e.g. system service processes, user processes that are shared
between multiple sessions of the same user, or kernel threads).

This patch adds output option "sd_session" which will
show name of session or "-", when process does not belong
to any session.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
7ab5d33c5c ps: possibility to display systemd unit for a process
Library systemd-login offers possibility to display
name of a systemd unit file for specific pid. Note that
not all processes are part of a system unit/service
(e.g. user processes, or kernel threads).

This patch adds output option "sd_unit" which will
show name of systemd unit or "-", when process does not
belong to any unit.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Aristeu Rozanski
a01ee3c0b3 procps: add support for linux namespaces
Each process in Linux has a /proc/<pid>/ns directory which contains
symbolic links to pipes that identify which namespaces that process
belongs to. This patch adds support for ps to display that information
optionally.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
2013-04-16 15:05:21 -04:00
Craig Small
c03aa80ad1 Fixed warning about error_at_line
ps/display.c:65:7: warning: implicit declaration of function
‘error_at_line’ [-Wimplicit-function-declaration]

Applied Gentoo patch created by ssuominen

References:
  http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/sys-process/procps/files/procps-3.3.6-error_at_line.patch?annotate=1.1&diff_format=f
  http://www.freelists.org/post/procps/procpsng-337,17

Signed-off-by: Craig Small <csmall@enc.com.au>
2013-03-26 21:27:38 +11:00
Jim Warner
fe75e26ab6 miscellaneous: clean up trailing whitespace throughout
The entire tree's polluted with inappropriate trailing
whitespace. This commit rids our environment of all of
those useless keystrokes. Unfortunately, it sure ain't
a permanent solution and requires every contributor to
instruct their editor(s) to prevent or eliminate them.

Plus it's strongly recommended we all insert something
like what's shown below to our '.gitconfig' file so as
to provide at least some warnings when we try to apply
any patches (git am) that do contain the #@!%& things!

References(s):
~/.gitconfig excerpt ---------------------------------
[core]
  whitespace = trailing-space, space-before-tab, blank-at-eof
[apply]
  whitespace = warn
--------------------------------- ~/.gitconfig excerpt

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-03-14 12:36:47 +01:00
Craig Small
eae3efd2b5 Merge commit 'refs/merge-requests/6' of git://gitorious.org/procps/procps into merge-requests/6 2013-01-24 21:51:13 +11:00