shadow/man/newusers.8.xml

431 lines
14 KiB
XML
Raw Normal View History

<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright (c) 1991 - 1994, Julianne Frances Haugh
Copyright (c) 2007 - 2011, Nicolas François
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. The name of the copyright holders or contributors may not be used to
endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
<!ENTITY ENCRYPT_METHOD SYSTEM "login.defs.d/ENCRYPT_METHOD.xml">
<!ENTITY GID_MAX SYSTEM "login.defs.d/GID_MAX.xml">
<!ENTITY MAX_MEMBERS_PER_GROUP SYSTEM "login.defs.d/MAX_MEMBERS_PER_GROUP.xml">
<!ENTITY MD5_CRYPT_ENAB SYSTEM "login.defs.d/MD5_CRYPT_ENAB.xml">
<!ENTITY PASS_MAX_DAYS SYSTEM "login.defs.d/PASS_MAX_DAYS.xml">
<!ENTITY PASS_MIN_DAYS SYSTEM "login.defs.d/PASS_MIN_DAYS.xml">
<!ENTITY PASS_WARN_AGE SYSTEM "login.defs.d/PASS_WARN_AGE.xml">
<!ENTITY SHA_CRYPT_MIN_ROUNDS SYSTEM "login.defs.d/SHA_CRYPT_MIN_ROUNDS.xml">
<!ENTITY SYS_GID_MAX SYSTEM "login.defs.d/SYS_GID_MAX.xml">
<!ENTITY SYS_UID_MAX SYSTEM "login.defs.d/SYS_UID_MAX.xml">
<!ENTITY UID_MAX SYSTEM "login.defs.d/UID_MAX.xml">
<!ENTITY UMASK SYSTEM "login.defs.d/UMASK.xml">
<!-- SHADOW-CONFIG-HERE -->
]>
<refentry id='newusers.8'>
<!-- $Id$ -->
<refmeta>
<refentrytitle>newusers</refentrytitle>
<manvolnum>8</manvolnum>
<refmiscinfo class="sectdesc">System Management Commands</refmiscinfo>
<refmiscinfo class="source">shadow-utils</refmiscinfo>
<refmiscinfo class="version">&SHADOW_UTILS_VERSION;</refmiscinfo>
</refmeta>
<refnamediv id='name'>
<refname>newusers</refname>
<refpurpose>update and create new users in batch</refpurpose>
</refnamediv>
<!-- body begins here -->
<refsynopsisdiv id='synopsis'>
<cmdsynopsis>
<command>newusers</command>
<arg choice='opt'>
<replaceable>options</replaceable>
</arg>
<arg choice='opt'>
<replaceable>file</replaceable>
</arg>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1 id='description'>
<title>DESCRIPTION</title>
<para>
The <command>newusers</command> command reads a <replaceable>file</replaceable> (or the standard input by default)
and uses this information to update a set
of existing users or to create new users. Each line is in the same format
as the standard password file (see
<citerefentry><refentrytitle>passwd</refentrytitle><manvolnum>5</manvolnum>
</citerefentry>) with the exceptions explained below:
</para>
<para>pw_name:pw_passwd:pw_uid:pw_gid:pw_gecos:pw_dir:pw_shell</para>
<variablelist remap='IP'>
<varlistentry>
<term>
<emphasis remap='I'>pw_name</emphasis>
</term>
<listitem>
<para>
This is the name of the user.
</para>
<para>
It can be the name of a new user or the name of an existing
user (or an user created before by
<command>newusers</command>). In case of an existing user,
the user's information will be changed, otherwise a new user
will be created.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<emphasis remap='I'>pw_passwd</emphasis>
</term>
<listitem>
<para>
This field will be encrypted and used as the new value of the
encrypted password.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<emphasis remap='I'>pw_uid</emphasis>
</term>
<listitem>
<para>
This field is used to define the UID of the user.
</para>
<para>
If the field is empty, an new (unused) UID will be defined
automatically by <command>newusers</command>.
</para>
<para>
If this field contains a number, this number will be used as
the UID.
</para>
<para>
If this field contains the name of an existing user (or the
name of an user created before by
<command>newusers</command>), the UID of the specified user
will be used.
</para>
<para>
If the UID of an existing user is changed, the files ownership
of the user's file should be fixed manually.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<emphasis remap='I'>pw_gid</emphasis>
</term>
<listitem>
<para>
This field is used to define the primary group ID for the user.
</para>
<para>
If this field contains the name of an existing group (or a
group created before by <command>newusers</command>), the GID
of this group will be used as the primary group ID for the
user.
</para>
<para>
If this field is a number, this number will be used as the
primary group ID of the user. If no groups exist with this
GID, a new group will be created with this GID, and the name
of the user.
</para>
<para>
If this field is empty, a new group will be created with the
name of the user and a GID will be automatically defined by
<command>newusers</command> to be used as the primary group ID
for the user and as the GID for the new group.
</para>
<para>
If this field contains the name of a group which does not
exist (and was not created before by
<command>newusers</command>), a new group will be created with
the specified name and a GID will be automatically defined by
<command>newusers</command> to be used as the primary group ID
for the user and GID for the new group.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<emphasis remap='I'>pw_gecos</emphasis>
</term>
<listitem>
<para>
This field is copied in the GECOS field of the user.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<emphasis remap='I'>pw_dir</emphasis>
</term>
<listitem>
<para>
This field is used to define the home directory of the user.
</para>
<para>
If this field does not specify an existing directory, the
specified directory is created, with ownership set to the
user being created or updated and its primary group.
</para>
<para>
If the home directory of an existing user is changed,
<command>newusers</command> does not move or copy the content
of the old directory to the new location. This should be done
manually.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<emphasis remap='I'>pw_shell</emphasis>
</term>
<listitem>
<para>
This field defines the shell of the user.
No checks are performed on this field.
</para>
</listitem>
</varlistentry>
</variablelist>
<para>
<command>newusers</command> first tries to create or change all the
specified users, and then write these changes to the user or group
databases. If an error occurs (except in the final writes to the
databases), no changes are committed to the databases.
</para>
<para condition="pam">
During this first pass, users are created with a locked password
(and passwords are not changed for the users which are not created).
A second pass is used to update the passwords using PAM. Failures
to update a password are reported, but will not stop the other
password updates.
</para>
<para>
This command is intended to be used in a large system environment
where many accounts are updated at a single time.
</para>
</refsect1>
<refsect1 id='options'>
<title>OPTIONS</title>
<para>
The options which apply to the <command>newusers</command> command are:
</para>
<variablelist remap='IP' condition="no_pam">
<varlistentry>
<term><option>-c</option>, <option>--crypt-method</option></term>
<listitem>
<para>Use the specified method to encrypt the passwords.</para>
<para>
The available methods are DES, MD5, NONE, and SHA256 or SHA512
if your libc support these methods.
</para>
</listitem>
</varlistentry>
</variablelist>
<variablelist remap='IP'>
<varlistentry>
<term><option>-h</option>, <option>--help</option></term>
<listitem>
<para>Display help message and exit.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>-r</option>, <option>--system</option>
</term>
<listitem>
<para>
Create a system account.
</para>
<para>
System users will be created with no aging information in
<filename>/etc/shadow</filename>, and their numeric
identifiers are chosen in the
<option>SYS_UID_MIN</option>-<option>SYS_UID_MAX</option>
range, defined in <filename>login.defs</filename>, instead of
<option>UID_MIN</option>-<option>UID_MAX</option> (and their
<option>GID</option> counterparts for the creation of groups).
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
<option>-R</option>, <option>--root</option>
<replaceable>CHROOT_DIR</replaceable>
</term>
<listitem>
<para>
Apply changes in the <replaceable>CHROOT_DIR</replaceable>
directory and use the configuration files from the
<replaceable>CHROOT_DIR</replaceable> directory.
</para>
</listitem>
</varlistentry>
</variablelist>
<variablelist remap='IP' condition="no_pam">
<varlistentry condition="sha_crypt">
<term><option>-s</option>, <option>--sha-rounds</option></term>
<listitem>
<para>
Use the specified number of rounds to encrypt the passwords.
</para>
<para>
The value 0 means that the system will choose the default
number of rounds for the crypt method (5000).
</para>
<para>
A minimal value of 1000 and a maximal value of 999,999,999
will be enforced.
</para>
<para>
You can only use this option with the SHA256 or SHA512
crypt method.
</para>
<para>
By default, the number of rounds is defined by the
SHA_CRYPT_MIN_ROUNDS and SHA_CRYPT_MAX_ROUNDS variables in
<filename>/etc/login.defs</filename>.
</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1 id='caveats'>
<title>CAVEATS</title>
<para>
The input file must be protected since it contains unencrypted
passwords.
</para>
<para condition="no_pam">
You should make sure the passwords and the encryption method respect
the system's password policy.
</para>
</refsect1>
<refsect1 id='configuration'>
<title>CONFIGURATION</title>
<para>
The following configuration variables in
<filename>/etc/login.defs</filename> change the behavior of this
tool:
</para>
<variablelist condition="no_pam">
&ENCRYPT_METHOD;
</variablelist>
<variablelist>
&GID_MAX; <!-- documents also GID_MIN -->
&MAX_MEMBERS_PER_GROUP;
</variablelist>
<variablelist condition="no_pam">
&MD5_CRYPT_ENAB;
</variablelist>
<variablelist>
&PASS_MAX_DAYS;
&PASS_MIN_DAYS;
&PASS_WARN_AGE;
</variablelist>
<variablelist condition="no_pam">
&SHA_CRYPT_MIN_ROUNDS; <!-- documents also SHA_CRYPT_MAX_ROUNDS-->
</variablelist>
<variablelist>
&SYS_GID_MAX; <!-- documents also SYS_GID_MIN -->
&SYS_UID_MAX; <!-- documents also SYS_UID_MIN -->
&UID_MAX; <!-- documents also UID_MIN -->
&UMASK;
</variablelist>
</refsect1>
<refsect1 id='files'>
<title>FILES</title>
<variablelist>
<varlistentry>
<term><filename>/etc/passwd</filename></term>
<listitem>
<para>User account information.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><filename>/etc/shadow</filename></term>
<listitem>
<para>Secure user account information.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><filename>/etc/group</filename></term>
<listitem>
<para>Group account information.</para>
</listitem>
</varlistentry>
<varlistentry condition="gshadow">
<term><filename>/etc/gshadow</filename></term>
<listitem>
<para>Secure group account information.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><filename>/etc/login.defs</filename></term>
<listitem>
<para>Shadow password suite configuration.</para>
</listitem>
</varlistentry>
<varlistentry condition="pam">
<term><filename>/etc/pam.d/newusers</filename></term>
<listitem>
<para>PAM configuration for <command>newusers</command>.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1 id='see_also'>
<title>SEE ALSO</title>
<para>
<citerefentry>
<refentrytitle>login.defs</refentrytitle><manvolnum>5</manvolnum>
</citerefentry>,
<citerefentry>
<refentrytitle>passwd</refentrytitle><manvolnum>1</manvolnum>
</citerefentry>,
<citerefentry>
<refentrytitle>useradd</refentrytitle><manvolnum>8</manvolnum>
</citerefentry>.
</para>
</refsect1>
</refentry>