emo/sysklogd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
af37f47f91
sysklogd/ChangeLog.md
Joachim Nilsson b07393c426 Update ChangeLog with license change 
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
2019-12-07 11:05:02 +01:00

291 lines
13 KiB
Markdown
Raw Blame History

Change Log
==========
All relevant changes to the project are documented in this file.
[v2.1][UNRELEASED]
------------------
Relicensed under the 3-clause BSD license.
### Changes
- `klogd` removed, replaced by native `syslogd` functionality
- Import prisitine FreeBSD versions of `syslogd` and `syslog.conf` man
pages, both under the 3-clause BSD license.
- With `klogd` removed and the original man pages replaced with FreeBSD
versions, the only remaining GPL'ed material was the build system,
which the copyright owner (undersigned) agrees to change to BSD as
well. Hence, the GNU GPL could be dropped in favor of 3-clause BSD
### Fixes
- Issue #8: Kernel messages duplicated to console. `syslogd` on Linux
now calls `klogctl()` to disable kernel logging to console
- Earlier versions were slightly sensitive to time skips. I.e., when
recording the last-change time on a log file and wall time changed
backwards, `syslogd` would consider that log file to have a date in
the future. This only affected buffering of multiple messages, and
`-- MARK --` so most users never would have noticed
- Fix nasty parallel build problem reported by Gentoo and Westermo
- Use correct `#ifdef` for checking on Linux or not
[v2.0.3][] - 2019-12-01
-----------------------
### Changes
- Always run `domark()` timer, regardless of `-m interval` setting,
it is used for internal housekeeping, runs every 15 sec
- Handle DNS lookup of unknown remote syslog hosts in `domark()`
- Only enable debug mode when `-d` is given on the command line
- Always create PID file, even in debug mode
- Add `-F`, as alias for `-n`, to klogd for compat. with syslogd
### Fixes
- When logging to a remote host using @FQDN previous releases of syslogd
gave up after 10 tries. In many industrial cases intermittent access
to the DNS is very likely, so this release includes a fix to retry the
IP address lookup forever. The interval for retries is configurable
- Fix accidental blocking of SIGHUP/SIGALRM when an invalid facility is
found in the internal `logmsg()` function
- Fix leaking of internal error messages (like DNS lookup failure) to
`/dev/console` during reconfiguration, i.e. after initial start
[v2.0.2][] - 2019-11-28
-----------------------
### Changes
- Add missing remote:port info in error message when failing to send to
a remote syslog server.
### Fixes
- Fix `assert()` in `fprintlog_successive()`, caused by never being
reset in `fprintlog_first()`, found by Westermo
- Issue #6: Workaround for systems with vanilla autoconf 2.69 that does
not support `--runstatedir=PATH`, e.g. CRUX <https://crux.nu/>
[v2.0.1][] - 2019-11-25
-----------------------
Minor bug fix release.
### Changes
- Make logger tool and man page optional in build, by Lars Wendler
- Expand resulting directories in configure summary
### Fixes
- Add missing `-k` and `-T` command line flags to `getopt()`
- Issue #3: Don't guess PID file location, use configre's `$runstatedir`
[v2.0][] - 2019-11-15
---------------------
This release represents a major refresh of the sysklogd project. The
venerable syslogd gets an infusion of new blood from NetBSD and FreeBSD
to fully support RFC3164 and RFC5424. Also included is a user library
and a replacement for `syslog.h` to enable new features in RFC5424.
> Note: as of this release `klogd` is disabled by default, `syslogd` can
> read Linux kernel messages on its own now.
### Changes
- Support for true RFC3164 formatted log messages to remote log servers,
including timestamp and hostname. Use `;RFC3161` rule option
- Support for RFC5424 from UNIX domain socket, from remote servers and also
to remote servers. Requires new API `syslogp()` to unlock these features
on the UNIX socket. Still compatible with GLIBC/musl/uClibc
- Support for options to `syslog.conf` rules. E.g. `;RFC5424` to enable
sending/writing log messages with RFC3339 style timestamps, and more
- Support for `include /etc/syslog.d/*.conf` in `syslog.conf`
- New tool `logger` from the Finit project, BSD licensed. Supports all the
features of RFC5424, so *very* useful for trying out the "new" standard
- Support for reading from a custom UNIX domain socket path, `-p SOCK`,
for unit testing with `logger -u /path/to/sock`
- Support for sending to a custom port on a remote server, `@host:port`
- New `syslogp()` API from NetBSD, for applications wanting to use
RFC5424 features like MsgID or structured data
- Many *incompatible changes* to command line options in `syslogd` and
`klogd` for compatiblity with FreeBSD and NetBSD syslogd. Examples:
- In syslogd: `-b` and `-c` have been replaced with `-r` for global
log rotation, `-a` has been replaced with the new `-p` support. The
`-r` flag and `-s HOST` has also been dropped in favor of the BSD
`-s` flag to control two levels of _secure mode_. The `-n` flag is
now `-F` and `-n` means something else entirely ... there's more
- In klogd: `-i` and `-I` have been removed
- `klogd` is not built by default anymore, `syslogd` can read `/proc/kmsg`
on Linux on its own. Reduces complexity and gives you one daemon less
- When systemd support is detected by the configure script the unit file(s)
are now installed into the systemd system services folder
- Update COPYING file to GPL 2 rev 2, with new FSF address and other minor stuff
- Update license header in all files:
- Sync 3-clause BSD license change with upstream NetBSD and FreeBSD sources
- Sync GPL license header, new FSF address
- Add SPDX license identifiers to all source files
### Fixes
- Fix GCC 8 warnings; "too small destination buffer in `snprintf()`"
- Major code cleanup and rewrite inspired by both NetBSD and FreeBSD
sources, e.g. removed all previous unit `TESTING` #ifdefs
[v1.6][] - 2018-09-25
---------------------
### Changes
- IPv6 support forward ported from FreeBSD, by John Haxby <john.haxby@oracle.com>
- Built-in log rotation support from BusyBox syslogd, disabled by default
- Enable from command line using '-b SIZE' and '-c COUNT', or
- Per log file in syslog.conf using 'SIZE:COUNT'
- Automatic compression (gzip) of rotated files from .1
- Only read /etc/services when needed, by Martin Schulze <joey@infodrom.org>
- Improved sleep/alarm/mark implementation,
by Alan Jenkins <alan-jenkins@tuffmail.co.uk>
- Move hostname setting code from `main()` into `init()` so it is
re-read on SIGHUP, by Thomas Jarosch <thomas.jarosch@intra2net.com>
- Documentation update by Martin Schulze <joey@infodrom.org>
- Re-indent code to Linux KNF
- Touch PID file on `SIGHUP`, for integration with Finit
- Add systemd unit files
- Add GNU configure & build system
- Add configure flags to enable features and control behavior
- Detect systemd PATHs
### Fixes
- Flush log files independent of MARK, by Martin Schulze <joey@infodrom.org>
- Fix segfault, remove faulty `fclose()`, found by Andrea Morandi and
Sean Young. Fixed by Martin Schulze <joey@infodrom.org>
- Correct continuation line problems on 64bit architecture,
by David Couture <glowplugrelayw0rks@gmail.com>
- Bugfix against invalid PRI values (CVE-2014-3634), by mancha <mancha1@zoho.com>
- Ignore backed up (low baud rate) console, and do not close it.
Instead, continue writing when its unclogged
- Increase socket receive buffer size (double), patch from FreeBSD
[v1.5.1][] - 2014-10-06
-----------------------
### Fixes
- Bugfix against invalid PRI values (CVE-2014-3634), by mancha <mancha1@zoho.com>
[v1.5][] - 2007-07-27
---------------------
- Dmitry V. Levin <ldv@altlinux.org>
- Close file descriptor in FindSymbolFile() in ksym.c in order not to
leak file descriptors.
- Solar Designer <solar@openwall.com>
- improve crunch_list()
- Prevent potential buffer overflow in reading messages from the
kernel log ringbuffer.
- Ensure that "len" is not placed in a register, and that the
endtty() signal handler is not installed too early which could
cause a segmentation fault or worse.
- Steve Grubb <linux_4ever@yahoo.com>
- fix memory calculation in crunch_list()
- Martin Schulze <joey@infodrom.org>
- klogd will reconnect to the logger (mostly syslogd) after it went
away
- On heavily loaded system syslog will not spit out error messages
anymore when recvfrom() results in EAGAIN
- Makefile improvements
- Local copy of module.h
- Improved sysklogd.8
- Always log with syslogd's timezone and locale
- Remove trailing newline when forwarding messages
- Continue working properly if /etc/service is missing and ignore
network activity
- Continue writing to log files as soon as space becomes available
again after a filled up disk
- Removed test to detect control characters > 0x20 as this prevented
characters encoded in UTF-8 to be properly passed through
- Only resolve the local domain when accepting messages from remote
- Properly accompany the MARK message with the facility
- Improved daemonise routine in klogd to stabilise startup
- klogd will not change the console log level anymore unless -c is given
- Added back /usr/src/linux/System.map as fall-back location
- Rewrote the module symbol parser to read from /proc/kallsyms
- Notify the waiting parent process if the client dies so it doesn't
wait the entire five minutes.
- Complete rewrite of the oops kernel module for Linux 2.6
- Only read kernel symbols from /proc/kallsyms if no System.map has been read
- Improved symbol lookup
- Prevent named pipes from becoming the controlling tty
- Jon Burgess <Jon_Burgess@eur.3com.com>
- Moved the installation of the signal handler up a little bit so it
guaranteed to be available when the child is forked, hence, fixing a
race condition. This used to create problems with UML and fast
machines.
- Greg Trounson <gregt@maths.otago.ac.nz>
- Improved README.linux
- Ulf H<>rnhammar <Ulf.Harnhammar.9485@student.uu.se>
- Boundary check for fscanf() in InitKsyms() and CheckMapVersion()
- Colin Phipps <cph@cph.demon.co.uk>
- Don't block on the network socket in case of packet loss
- Dirk Mueller <mueller@kde.org>
- Don't crash when filesize limit is reached (e.g. without LFS)
- Miquel van Smoorenburg <miquels@cistron.nl>
- Fix spurious hanging syslogd in connection with futex and NPTL
introduced in recent glibc versions and Linux 2.6
(Details: http://bugs.debian.org/301511)
- Eric Tucker <et@tallmaple.com>
- Improved syslog.conf(5) manpage
- Mike Frysinger <vapier@gentoo.org>
- use socklen_t where appropriate
- Kelledin <kelledin@skarpsey.dyndns.org>
- use newer query_module function rather than stepping through /dev/kmem.
- Matthew Fischer <futhark@vzavenue.net>
- Remove special treatment of the percent sign in klogd
[v1.4.1][] - 2001-03-11
-----------------------
- klogd will set the console log level only if `-c' is given on the
commandline, not overwriting local settings in `/etc/sysctl.conf'.
- Bugfix: klogd will use SOCK_DGRM as well, re-enables kernel logging
- Bugfix: Don't make syslogd fail with broken `-a'
- Bugfix: klogd will skip zero bytes and not enter a busy loop anymore
- Thomas Roessler <roessler@does-not-exist.org>
- Patch to prevent LogLine() from being invoked with a negative
counter as an argument.
[v1.4][] - 2000-09-19
---------------------
- Skip newline when reading in klog messages
- Use lseek64() instead of llseek() which is deprecated these days
- Close symbol file before returning with 0 when an error occurred
while reading it. This will enable systems to umount that
partition with no open file descriptor left over.
- Solar Designer <solar@false.com>
- printline() fixes
- priority decoding fix
- Daniel Jacobowitz <dan@debian.org>
- printchopped() fix
- Keith Owens <kaos@ocs.com.au>
- Fixed bug that caused klogd to die if there is no sym_array available.
- When symbols are expanded, print the line twice. Once with
addresses converted to symbols, once with the raw text. Allows
external programs such as ksymoops do their own processing on the
original data.
- Olaf Kirch <okir@caldera.de>
- Remove Unix Domain Sockets and switch to Datagram Unix Sockets
- Several bugfixes and improvements, please refer to the .c files
[UNRELEASED]: https://github.com/troglobit/sysklogd/compare/v2.0.3...HEAD
[v2.0.3]: https://github.com/troglobit/sysklogd/compare/v2.0.2...v2.0.3
[v2.0.2]: https://github.com/troglobit/sysklogd/compare/v2.0.1...v2.0.2
[v2.0.1]: https://github.com/troglobit/sysklogd/compare/v2.0...v2.0.1
[v2.0]: https://github.com/troglobit/sysklogd/compare/v1.6...v2.0
[v1.6]: https://github.com/troglobit/sysklogd/compare/v1.5...v1.6
[v1.5.1]: https://github.com/troglobit/sysklogd/compare/v1.5...v1.5.1
[v1.5]: https://github.com/troglobit/sysklogd/compare/v1.4...v1.5
[v1.4]: https://github.com/troglobit/sysklogd/compare/v1.3...v1.4
Reference in New Issue View Git Blame Copy Permalink