Add a specific define to indicate which bash compatibility code
implements 'wait -n'.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The following constructs result in ever-increasing memory usage:
while true; do { true; } </dev/null; done
while true; do ( true; ) </dev/null; done
For comparison, bash displays static memory usage in both cases.
This has been fixed in dash by commit 2bc6caa. The maintainer
writes:
I have simplified evaltree so that it simply sets the stack mark
unconditionally. This allows us to remove the stack marks in the
functions called by evaltree.
Closes BusyBox bug 7748.
function old new delta
evaltree 606 632 +26
evalcommand 1724 1696 -28
evalcase 382 351 -31
evalfor 230 196 -34
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 26/-93) Total: -67 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Embedded scripts require a shell to be present in the BusyBox
binary. Allow either ash or hush to be used for this purpose.
If both are enabled ash takes precedence.
The size of the binary is unchanged in the default configuration:
both ash and hush are present but support for embedded scripts
isn't compiled into hush.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The parser reads from an already freed memory location, thereby causing
unpredictable results, in the following situation:
- ENABLE_ASH_EXPAND_PRMT is enabled
- heredoc is being parsed
- command substitution is used within heredoc
Examples where this bug crops up are (PS2 is set to "> "):
$ cat <<EOF
> `echo abc`
> EOF
-sh: O: not found
$ cat <<EOF
> $(echo abc)
> EOF
-sh: {garbage}: not found
The presumable reason is that setprompt_if() causes a nested expansion when
ENABLE_ASH_EXPAND_PRMT is enabled, therefore leaving "wordtext" in an unusable
state. However, when parseheredoc() is called, "tokpushback" is non-zero, which
causes the next call to xxreadtoken() to return TWORD, causing the caller to
use the invalid "wordtoken" instead of reading the next valid token.
The call chain is:
list()
-> peektoken() [sets tokpushback to 1]
-> parseheredoc()
-> setprompt_if()
-> pushstackmark()
-> expandstr()
-> readtoken1()
[sets lasttoken to TWORD, wordtoken points to expanded prompt]
-> popstackmark() [invalidates wordtoken, leaves lasttoken as is]
-> readtoken1()
-> ...parsebackq
-> list()
-> andor()
-> pipeline()
-> readtoken()
-> xxreadtoken()
[tokpushback non-zero, reuse lasttoken and wordtext]
Note that in almost all other contexts, each call to setprompt_if() is preceded
by setting "tokpushback" to zero. One exception is "oldstyle" backquote parsing
in readtoken1(), but there "tokpushback" is reset afterwards. The other
exception is nlprompt(), but this function is only used within readtoken1()
(but in contexts where no nested calls to xxreadtoken() occur) and xxreadtoken()
(where "tokpushback" is guaranteed to be zero).
function old new delta
parseheredoc 124 131 +7
Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
BusyBox has support for embedded shell scripts. Two types can be
distinguished: custom scripts and scripts implementing applets.
Custom scripts should be placed in the 'embed' directory at build
time. They are given a default applet configuration and appear
as applets to the user but no further configuration is possible.
Applet scripts are integrated with the BusyBox build system and
are intended to be used to ship standard applets that just happen
to be implemented as scripts. They can be configured at build time
and appear just like native applets.
Such scripts should be placed in the 'applets_sh' directory. A stub
C program should be written to provide the usual applet configuration
details and placed in a suitable subsystem directory. It may be
helpful to have a configuration option to enable any dependencies the
script requires: see the 'nologin' applet for an example.
function old new delta
scripted_main - 41 +41
applet_names 2773 2781 +8
applet_main 1600 1604 +4
i2cdetect_main 672 674 +2
applet_suid 100 101 +1
applet_install_loc 200 201 +1
applet_flags 100 101 +1
packed_usage 33180 33179 -1
tryexec 159 152 -7
evalcommand 1661 1653 -8
script_names 9 - -9
packed_scripts 123 114 -9
complete_cmd_dir_file 826 811 -15
shellexec 271 254 -17
find_command 1007 990 -17
busybox_main 642 624 -18
run_applet_and_exit 100 78 -22
find_script_by_name 51 - -51
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 6/9 up/down: 58/-174) Total: -116 bytes
text data bss dec hex filename
950034 477 7296 957807 e9d6f busybox_old
949918 477 7296 957691 e9cfb busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When a variable is unset by calling setvar(name, NULL, 0) the code
to initialise the new, empty variable fails to initialise the last
character of the string.
Attempts to read the contents of the unset variable will result
in the uninitialised character at the end of the string being
accessed.
For example, running BusyBox under Valgrind and unsetting PATH:
$ valgrind ./busybox_unstripped sh
==21249== Memcheck, a memory error detector
==21249== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==21249== Using Valgrind-3.14.0 and LibVEX; rerun with -h for copyright info
==21249== Command: ./busybox_unstripped sh
==21249==
/data2/git/build_fix_8721 $ unset PATH
/data2/git/build_fix_8721 $ 0
==21249== Conditional jump or move depends on uninitialised value(s)
==21249== at 0x451371: path_advance (ash.c:2555)
==21249== by 0x456E22: find_command (ash.c:13407)
==21249== by 0x458425: evalcommand (ash.c:10139)
==21249== by 0x454CBC: evaltree (ash.c:9131)
==21249== by 0x456C80: cmdloop (ash.c:13164)
Closes https://bugs.busybox.net/show_bug.cgi?id=8721
v2: On the dash mailing list Harald van Dijk was kind enough to point
out a flaw in my reasoning and provide an alternative patch. Sadly
his patch adds 2 bytes of bloat. Using xzalloc to zero the whole
string gives a bloat of -3 bytes.
function old new delta
setvar 172 169 -3
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The HUSH_TICK configuration option enables command substitution,
not process substitution.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ensure that login_sh is initialised in procargs even when running
an embedded script.
The argc argument to ash_main isn't unused when embedded scripts
are present.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
To assist in the deployment of shell scripts it may be convenient
to embed them in the BusyBox binary.
'Embed scripts in the binary' takes any files in the directory
'embed', concatenates them with null separators, compresses them
and embeds them in the binary.
When scripts are embedded in the binary, scripts can be run as
'busybox SCRIPT [ARGS]' or by usual (sym)link mechanism.
embed/nologin is provided as an example.
function old new delta
packed_scripts - 123 +123
unpack_scripts - 87 +87
ash_main 1103 1171 +68
run_applet_and_exit 78 128 +50
get_script_content - 32 +32
script_names - 10 +10
expmeta 663 659 -4
------------------------------------------------------------------------------
(add/remove: 4/0 grow/shrink: 2/1 up/down: 370/-4) Total: 366 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 28 Mar 2018 18:37:51 +0800
expand: Do not quote backslashes in unquoted parameter expansion
Here is a better example:
a="/*/\nullx" b="/*/\null"; printf "%s\n" $a $b
dash currently prints
/*/\nullx
/*/\null
bash prints
/*/\nullx
/dev/null
You may argue the bash behaviour is inconsistent but it actually
makes sense. What happens is that quote removal only applies to
the original token as seen by the shell. It is never applied to
the result of parameter expansion.
Now you may ask why on earth does the second line say "/dev/null"
instead of "/dev/\null". Well that's because it is not the quote
removal step that removed the backslash, but the pathname expansion.
The fact that the /de\v does not become /dev even though it exists
is just the result of the optimisation to avoid unnecessarily
calling stat(2). I have checked POSIX and I don't see anything
that forbids this behaviour.
So going back to dash yes I think we should adopt the bash behaviour
for pathname expansion and keep the existing case semantics.
This patch does exactly that. Note that this patch does not work
unless you have already applied
https://patchwork.kernel.org/patch/10306507/
because otherwise the optimisation mentioned above does not get
detected correctly and we will end up doing quote removal twice.
This patch also updates expmeta to handle naked backslashes at
the end of the pattern which is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
expmeta 618 653 +35
memtodest 146 147 +1
Tested to work with both ASH_INTERNAL_GLOB on and off.
hush does not handle this correctly.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:37 +0800
exec: Return 126 on most errors in shellexec
Currently when shellexec fails on most errors the shell will exit
with exit status 2. This patch changes it to 126 in order to avoid
ambiguities with the exit status from a successful exec.
The errors that result in 127 has also been expanded to include
ENOTDIR, ENAMETOOLONG and ELOOP.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
shellexec 245 254 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 27 Mar 2018 00:39:35 +0800
eval: Restore input files in evalcommand
When evalcommand invokes a command that modifies parsefile and
then bails out without popping the file, we need to ensure the
input file is restored so that the shell can continue to execute.
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
unwindfiles - 20 +20
evalcommand 1635 1653 +18
getoptscmd 584 595 +11
popallfiles 20 10 -10
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 49/-10) Total: 39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 3 Apr 2018 00:40:25 +0800
parser: Fix parsing of ${}
dash -c 'echo ${}' should print "Bad subtitution" but instead
fails with "Syntax error: Missing '}'". This is caused by us
reading an extra character beyond the right brace. This patch
fixes it so that this construct only fails during expansion rather
than during parsing.
Fixes: 3df3edd13389 ("[PARSER] Report substition errors at...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
readtoken1 2907 2916 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 23 Mar 2018 18:58:47 +0800
expand: Fix ghost fields with unquoted $@/$*
You're right. The proper fix to this is to ensure that nulonly
is not set in varvalue for $*. It should only be set for $@ when
it's inside double quotes.
In fact there is another bug while we're playing with $@/$*.
When IFS is set to a non-whitespace character such as :, $*
outside quotes won't remove empty fields as it should.
This patch fixes both problems.
Reported-by: Martijn Dekker <martijn@inlv.org>
Suggested-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
argstr 1111 1113 +2
evalvar 571 569 -2
varvalue 579 576 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 2/-5) Total: -3 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:43 +0800
var: Set IFS to fixed value at start time
This patch forces the IFS variable to always be set to its default
value, regardless of the environment.
It also removes the long unused IFS_BROKEN code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 4 Apr 2018 17:54:01 +0800
eval: Variable assignments on functions are no longer persistent
Dirk Fieldhouse <fieldhouse@gmx.net> wrote:
> In POSIX.1-2017 ("simultaneously IEEE Std 1003.1™-2017 and The Open
> Group Technical Standard Base Specifications, Issue 7")
> <http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09>,
> we read under '2.9.1 Simple Commands'
>
> "Variable assignments shall be performed as follows:
> ...
> - If the command name is a standard utility implemented as a function
> (see XBD Utility), the effect of variable assignments shall be as if the
> utility was not implemented as a function.
> ...
> - If the command name is a function that is not a standard utility
> implemented as a function, variable assignments shall affect the current
> execution environment during the execution of the function. It is
> unspecified:
>
> * Whether or not the variable assignments persist after the
> completion of the function
>
> * Whether or not the variables gain the export attribute during
> the execution of the function
>
> * Whether or not export attributes gained as a result of the
> variable assignments persist after the completion of the function (if
> variable assignments persist after the completion of the function)"
POSIX used to require the current dash behaviour. However, you're
right that this is no longer the case.
This patch will remove the persistence of the variable assignment.
I have considered the exporting the variables during the function
execution but have decided against it because:
1) It makes the code bigger.
2) dash has never done this in the past.
3) You cannot use this portably anyway.
Reported-by: Dirk Fieldhouse <fieldhouse@gmx.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
evalcommand 1606 1635 +29
evalcase 313 317 +4
evalfun 280 268 -12
pushlocalvars 48 - -48
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/1 up/down: 33/-60) Total: -27 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Was printing initial "+" prefix for the assignment, that printing
"+ cmd"
then printing the expanded " v=VAL" string.
Delay printing of "+" prefix for the assignment to after expansion.
function old new delta
run_pipe 1883 1902 +19
builtin_eval 127 133 +6
expand_vars_to_list 1103 1106 +3
dump_cmd_in_x_mode 144 142 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 28/-2) Total: 26 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The n > 0 check to prevent access to the last byte of non-existing argv[-1]
wasn't enough. Switched to making sure there are initialized (zero) bytes there.
A predictable testcase is rather hard to construct, unfortunately,
contents of memory depends on allocator behavior and whatnot.
function old new delta
o_save_ptr_helper 119 137 +18
expand_on_ifs 345 339 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-6) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This necessitates switch from libc FILE api to a simple
homegrown replacement.
The change which fixes the bug here is the deleting of
restore_redirected_FILEs();
line. It was prematurely moving (restoring) script fd#3.
The fix is: we don't even _want_ to restore scrit fds,
we are perfectly fine with them being moved.
The only reason we tried to restore them is that FILE api
did not allow moving of FILE->fd.
function old new delta
refill_HFILE_and_getc - 93 +93
hfopen - 90 +90
hfclose - 66 +66
pseudo_exec_argv 591 597 +6
hush_main 1089 1095 +6
builtin_source 209 214 +5
save_fd_on_redirect 197 200 +3
setup_redirects 320 321 +1
fgetc_interactive 235 236 +1
i_peek_and_eat_bkslash_nl 99 97 -2
expand_vars_to_list 1103 1100 -3
restore_redirects 99 52 -47
fclose_and_forget 57 - -57
remember_FILE 63 - -63
------------------------------------------------------------------------------
(add/remove: 3/2 grow/shrink: 6/3 up/down: 271/-172) Total: 99 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
o_free() made o_string NULL-initialized,
o_free_unsafe() did not bother reinitializing (expected caller to not need it).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This wasn't an ash bug in dollar_altvalue9, it was hush bug (and bash!)
function old new delta
expand_one_var 2236 2254 +18
expand_vars_to_list 1097 1103 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 24/0) Total: 24 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ash might be a bit buggy, need to investigate dollar_altvalue9 test
function old new delta
expand_one_var 1639 2236 +597
expand_variables 112 128 +16
expand_vars_to_list 1117 1097 -20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 613/-20) Total: 593 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is necessary since expand_one_var() for ${var:+ARG} must create more than one
output word, and thus can't simply return a char*.
function old new delta
expand_one_var 1610 1643 +33
expand_vars_to_list 1139 1125 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 33/-14) Total: 19 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Go over the string only once.
function old new delta
encode_then_expand_string 126 105 -21
encode_then_expand_vararg 443 399 -44
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-65) Total: -65 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kconfig-language.txt was deleted in commit 4fa499a17b back in 2006.
Move to docs/ as suggested by Xabier Oneca:
http://lists.busybox.net/pipermail/busybox/2014-May/080914.html
Also update references to it everywhere.
Signed-off-by: Kartik Agaram <akkartik@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 25 Mar 2018 16:38:00 +0800
expand: Fix buffer overflow in expandmeta
The native version of expandmeta allocates a buffer that may be
overrun for two reasons. First of all the size is 1 byte too small
but this is normally hidden because the minimum size is rounded
up to 2048 bytes. Secondly, if the directory level is deep enough,
any buffer can be overrun.
This patch fixes both problems by calling realloc when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
expmeta 517 635 +118
expandarg 990 996 +6
mklocal 288 290 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 126/0) Total: 126 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 22 Mar 2018 21:41:24 +0800
parser: Allow newlines within parameter substitution
On Fri, Mar 16, 2018 at 11:27:22AM +0800, Herbert Xu wrote:
> On Thu, Mar 15, 2018 at 10:49:15PM +0100, Harald van Dijk wrote:
> >
> > Okay, it can be trivially modified to something that does work in other
> > shells (even if it were actually executed), but gets rejected at parse time
> > by dash:
> >
> > if false; then
> > : ${$+
> > }
> > fi
>
> That's just a bug in dash's parser with ${} in general, because
> it bombs out without the if clause too:
>
> : ${$+
> }
This patch fixes the parsing of newlines with parameter substitution.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since we check for '\' anyway when we determine whether we can look ahead,
we can just check for *and handle* it there.
function old new delta
parse_stream 2751 2740 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
newer bash does not drop it, most other shells too
function old new delta
unbackslash 39 57 +18
parse_stream 2753 2751 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-2) Total: 16 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream email:
parser: Fix parameter expansion inside inner double quotes
The parsing of parameter expansion inside inner double quotes
breaks because we never look for ENDVAR while innerdq is true.
echo "${x#"${x+''}"''}
This patch fixes it by pushing the syntax stack if innerdq is
true and we enter a new parameter expansion.
This patch also fixes a corner case where a bad substitution error
occurs within arithmetic expansion.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes: ab1cecb40478 (" parser: Add syntax stack for recursive...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
readtoken1 2880 2898 +18
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream email:
This is actually composed of two bugs. First of all our tracking
of quotemark is wrong so anything after "$@" becomes quoted. Once
we fix that then the problem is that the first space character
after "$@" is not recognised as an IFS.
This patch fixes both.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 9 Mar 2018 23:07:53 +0800
parser: Fix single-quoted patterns in here-documents
The script
x=*
cat <<- EOF
${x#'*'}
EOF
prints * instead of nothing as it should. The problem is that
when we're in sqsyntax context in a here-document, we won't add
CTLESC as we should. This patch fixes it:
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This closes 10821.
Upstream patch:
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 9 Mar 2018 00:14:02 +0800
parser: Add syntax stack for recursive parsing
Without a stack of syntaxes we cannot correctly these two cases
together:
"${a#'$$'}"
"${a#"${b-'$$'}"}"
A recursive parser also helps in some other corner cases such
as nested arithmetic expansion with paratheses.
This patch adds a syntax stack allocated from the stack using
alloca. As a side-effect this allows us to remove the naked
backslashes for patterns within double-quotes, which means that
EXP_QPAT also has to go.
This patch also fixes removes any backslashes that precede right
braces when they are present within a parameter expansion context,
and backslashes that precede double quotes within inner double
quotes inside a parameter expansion in a here-document context.
The idea of a recursive parser is based on a patch by Harald van
Dijk.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
var_bash3, var_bash4 and var_bash6 tests are updated
with the output given by bash-4.3.43
With this patch, the following tests now pass for ash:
dollar_repl_slash_bash2.tests
squote_in_varexp2.tests
squote_in_varexp.tests
var_bash4.tests
function old new delta
readtoken1 2615 2874 +259
synstack_push - 54 +54
evalvar 574 571 -3
rmescapes 330 310 -20
subevalvar 1279 1258 -21
argstr 1146 1107 -39
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/4 up/down: 313/-83) Total: 230 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu Mar 15 18:27:30 2018 +0800
parser: Fix backquote support in here-document EOF mark
Currently using backquotes in a here-document EOF mark is broken
because dash tries to do command substitution on it. This patch
fixes it by checking whether we're looking for an EOF mark during
tokenisation.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With added fix for quoted-ness of the EOF mark.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Part of upstream commit:
Date: Thu Mar 8 08:37:11 2018 +0100
Author: Harald van Dijk <harald@gigawatt.nl>
parser: use pgetc_eatbnl() in more places
dash has a pgetc_eatbnl function in parser.c which skips any
backslash-newline combinations. It's not used everywhere it could be.
There is also some duplicated backslash-newline handling elsewhere in
parser.c. Replace most of the calls to pgetc() with calls to
pgetc_eatbnl() and remove the duplicated backslash-newline handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Not adding "readtoken1(pgetc_eatbnl(), DQSYNTAX..." changes, since
readtoken1() handles the "starts with backslash + newline" case itself.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue Mar 6 17:40:37 2018 +0000
expand: 'nolog' and 'debug' options cause "$-" to wreak havoc
Op 29-03-17 om 20:02 schreef Martijn Dekker:
> Bug: if either the 'nolog' or the 'debug' option is set, trying to
> expand "$-" silently aborts parsing of an entire argument.
>
> $ dash -o nolog -c 'set -fuC; echo "|$- are the options|"; set +o nolog; echo "|$- are the options|"'
> |
> |uCf are the options|
> $ dash -o debug -c 'set -fuC; echo "|$- are the options|"; set +o debug; echo "|$- are the options|"'
> |
> |uCf are the options|
This turned out to be easy to fix. The routine producing the "$-"
expansion failed to skip options for which there is no option letter,
but only a long-form name. In dash, 'nolog' and 'debug' are currently
the only two such options. Patch below.
- Martijn
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In bbox ash, pipefail is the option which exhibited this.
Signed-off-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Testcase:
set -- a ""; space=" "; printf "<%s>\n" "$@"$space
Before:
<a >
After:
<a>
<>
It usually does not bite since bbox forces -funsigned-char build.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It usually does not bite since bbox forces -funsigned-char build.
But for some reason void linux people disabled that.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
setjobctl 371 367 -4
setinputfile 226 220 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-10) Total: -10 bytes
Based on patch by Mark Marshall <mark.marshall@omicronenergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Based on a patch by Mark Marshall <mark.marshall@omicronenergy.com>
function old new delta
dup_CLOEXEC - 49 +49
fcntl_F_DUPFD 46 - -46
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It turns out bkslash_in_varexp.tests was a bash bug :]
ash and hush fail "corrected" bkslash_in_varexp.tests as well,
just not as badly as I thought (hush gets half of the cases right).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I don't have an example of mishandled script, but the logic looked wrong:
it could sometimes treat newlines as if they are spaces.
function old new delta
parse_stream 2788 2787 -1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This implements support for the command_not_found_handle hook function, which is
useful for allowing package managers to suggest packages which could provide the
command.
Unlike bash, however, we ignore exit codes from the hook function and always return
the correct POSIX error code (EX_NOTFOUND).
function old new delta
find_command 911 990 +79
Signed-off-by: William Pitcock <nenolod@dereferenced.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Before this patch, "${v:2:0x100000001}" = "${v:2:1}",
and similarly, constructs like "${v:2:9999999999}" may give wrong result
due to int overflows.
function old new delta
substr_atoi - 43 +43
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the numeric argument passed to ash's 'shift' built-in is greater than
'$#' the command performs no operation and exits successfully. It should
return a non-zero exit code instead:
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#shift
This is consistent with bash and hush.
function old new delta
shiftcmd 122 120 -2
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
NOEXEC'ed applets which use getopt() need this.
function old new delta
builtin_getopts 403 413 +10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is always nicer to give the user some sort of indication why an
operation failed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Looks biggish and not particularly useful, but may be easier to just eat
the impact if future backports from dash would be otherwise increasingly
difficult.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 30 Oct 2014 11:53:35 +0800
[PARSER] Catch variable length expansions on non-existant specials
Currently we only check special variable names that follow directly
after $ or ${. So errors such as ${#&} are not caught. This patch
fixes that by moving the is_special check to just before we print out
the special variable name.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
readtoken1 2630 2635 +5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The POSIX standard only requires the 'read' builtin to handle '-r':
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/read.html
However, Bash introduced the option '-d <DELIM>' to override IFS for
just one invocation, and it is quite useful.
We already support this in ash, let's add it to hush, too.
function old new delta
builtin_read 263 284 +21
.rodata 163587 163589 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The POSIX standard only requires the read builtin to handle -r:
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/read.html
However, Bash introduced the option -d <DELIM> to override IFS for
just one invocation, and it is quite useful.
It is also super easy to implement in BusyBox' ash, so let's do that.
The motivation: This option is used by Git's test suite.
function old new delta
.rodata 163505 163587 +82
shell_builtin_read 1244 1289 +45
readcmd 233 259 +26
builtin_read 258 263 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 158/0) Total: 158 bytes
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
hush -c 'yes | head -1' was not happy.
function old new delta
tryexec 159 169 +10
pseudo_exec_argv 328 338 +10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The applets with "<applet> [opts] PROG ARGS" API very quickly exec
another program, noexec is okay for them:
chpst/envdir/envuidgid/softlimit/setuidgid
chroot
chrt
ionice
nice
nohup
setarch/linux32/linux64
taskset
cttyhack
"reset" and "sulogin" applets don't have this form, but also exec
another program at once, thus made noexec too.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Based on patch by Johannes Schindelin <johannes.schindelin@gmx.de>
function old new delta
evalcommand 1447 1500 +53
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As of 035486c75 (ash: significant overhaul of redirect saving logic,
2017-07-31), the sv_pos variable is no longer used (just assigned to,
with no further effect).
Let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ echo $$
18448
$ echo $? <wait here, run "kill -INT 18448" in other shell><press enter>
<=== NOTHING??
$
That empty line does not look right. After this patch:
$ echo $$
18448
$ echo $? <wait here, run "kill -INT 18448" in other shell><press enter>
^C
$
function old new delta
fgetc_interactive 245 246 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"rm -i FILE" and "yes" can now be interrupted by ^C in hush.
This also now works:
$ usleep 19999999
^C
$ echo $?
130
function old new delta
run_pipe 1668 1711 +43
pseudo_exec_argv 312 321 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 52/0) Total: 52 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 13 Jul 2008 22:34:50 +0800
[OPTIONS] Added support for -l
This patch adds support for the -l option (login shell) as required
by the LSB.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's a bit bigger, but gets rid of one global variable
function old new delta
options 554 576 +22
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The fact that shell has open fds to tty and/or scripts should be
unobservable, if possible. In particular, if redirect tries to dup
one of them via ">&script_fd", it's better to pretend that script_fd
is closed, and thus redirect fails with EBADF.
Fixes these two testcase failures:
ash-redir/redir_to_bad_fd.tests
hush-redir/redir_to_bad_fd3.tests
function old new delta
redirect 1018 1129 +111
setup_redirects 250 359 +109
readtoken1 2651 2655 +4
cmdloop 185 187 +2
changepath 194 195 +1
save_fd_on_redirect 203 194 -9
evaltree 501 484 -17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/2 up/down: 227/-26) Total: 201 bytes
text data bss dec hex filename
914553 485 6848 921886 e111e busybox_old
914754 485 6848 922087 e11e7 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
New code is similar to what hush is doing.
Make CLOSED to -1: same as dash.
popredir() loses "restore" parameter: same as dash.
COPYFD_RESTORE bit is no longer necessary.
This change fixes this interactive bug:
$ ls -l /proc/$$/fd 10>&-
ash: can't set tty process group: Bad file descriptor
ash: can't set tty process group: Bad file descriptor
[1]+ Done(2) ls -l /proc/${\$}/fd 10>&4294967295
function old new delta
unwindredir 29 27 -2
tryexec 154 152 -2
evaltree 503 501 -2
evalcommand 1369 1367 -2
cmdloop 187 185 -2
redirect 1029 1018 -11
popredir 153 123 -30
need_to_remember 36 - -36
is_hidden_fd 68 - -68
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/7 up/down: 0/-155) Total: -155 bytes
text data bss dec hex filename
914572 485 6848 921905 e1131 busybox_old
914553 485 6848 921886 e111e busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 27 May 2010 15:03:46 +0800
[REDIR] Fix popredir on abnormal exit from built-in
Just like the poplocalvar problem recently fixed, redirections
can also be leaked in case of an abnormal exit. This patch fixes
it using the same method as poplocalvar, by storing the previous
redirection state and restoring to that point.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 27 Dec 2007 13:54:16 +1100
[PARSER] Add FAKEEOFMARK for expandstr
Previously expandstr used the string "" to indicate that it needs to be
treated just like a here-doc except that there is no terminator. However,
the string "" is in fact a valid here-doc terminator so now that we deal
with it correctly expandstr no longer works in the presence of new-lines
in the prompt.
This patch introduces the FAKEEOFMARK macro which does not equal any
real EOF marker but is distinct from the NULL pointer which is used to
indicate non-here-doc contexts.
Thanks to Markus Triska for reporting this regression.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Unfortunately, I did not find the failing example for this old fix.
I also tweaked the code which was added by this commit:
"
Date: Mon Sep 24 18:30:02 2007 +0000
ash: fix prompt expansion (Natanael Copa <natanael.copa@gmail.com>)
"
since other parts of code do expect expandstr() to use DQSYNTAX, not PSSYNTAX.
function old new delta
parse_stream 2609 2634 +25
setprompt_if 128 133 +5
read_profile 32 37 +5
evalcommand 1334 1339 +5
expandstr 122 120 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/1 up/down: 40/-2) Total: 38 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Sun, 11 Nov 2007 14:21:23 +0800
[PARSER] Removed noexpand/length check on eofmark
On Tue, Oct 30, 2007 at 04:23:35AM +0000, Oleg Verych wrote:
>
> } 8<<""
> ======================
Actually this (the empty delim) only works with dash by accident.
I've tried bash and pdksh and they both terminate on the first
empty line which is what you would expect rather than EOF. The
real Korn shell does something completely different.
I've fixed this in dash to conform to bash/pdksh.
> In [0] it's stated, that delimiter isn't evaluated (expanded), only
> quoiting must be checked. That if() seems to be completely bogus.
OK I agree. The reason it was there is because the parser would
have already replaced the dollar sign by an internal representation.
I've fixed it properly with this patch.
Test case:
cat <<- $a
OK
$a
cat <<- ""
OK
echo OK
Old result:
dash: Syntax error: Illegal eof marker for << redirection
OK
echo OK
New result:
OK
OK
OK
function old new delta
parsefname 227 152 -75
readtoken1 2819 2651 -168
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-243) Total: -243 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The '%m' conversion specifier prints an error message based on the
current value of 'errno'. It is available in the GNU C library,
Cygwin (since 2012), uClibc and musl.
It is not available in various BSDs, BSD-derived systems (MacOS,
Android) or Microsoft Windows.
Use a symbol defined in platform.h to control how error messages
can be formatted to display the 'errno' message. On platforms that
support it use '%m'; on other platforms use '%s' and strerror().
On platforms that have '%m' there is essentially no change in the
size of the binary. Otherwise:
function old new delta
redirect 1287 1310 +23
xtcsetpgrp 27 44 +17
dup2_or_raise 34 51 +17
setinputfile 267 275 +8
.rodata 163379 163371 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/1 up/down: 65/-8) Total: 57 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Defining a function alias with __attribute__ ((alias("evaltree"),__noreturn__))
is not that usual, and clang had a bug which made it misunderstand
this construct.
Switch to:
ALWAYS_INLINE NORETURN evaltreenr() { evaltree(); unreachable(); }
Older gcc's do not know unreachable(), on them we pay the price of having
a few extra calls to abort():
function old new delta
evalsubshell 151 156 +5
evalpipe 357 362 +5
argstr 1141 1144 +3
On newer gcc, code size does not change.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 6 Jul 2010 17:40:53 +0800
[VAR] Fix loss of variables when hash collides
Brian Koropoff reported that the new var patches broke the following
script:
#!/bin/dash
GDM_LANG="bar"
OPTION="foo"
unset GDM_LANG
# OPTION has mysteriously become unset
echo "$OPTION"
He correctly diagnosed this as a result of removing all variables
in the hash chain preceding the one that should be removed in
setvareq.
He also provided a patch to fix this.
This patch is based on his but without keeping the original vpp.
As a result, we now store new variables at the end of the hash
chain instead of the beginning.
To make this work, setvareq/setvar now returns the vp pointer
modified. In case they're used to unset a variable the pointer
returned is undefined. This is because mklocal needs it and
used to get it by assuming that the new variable always appear
at the beginning of the chain.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 27 May 2010 11:50:19 +0800
[VAR] Do not poplocalvars prematurely on regular utilities
The recent cmdenviron removal broke regular utilities by calling
poplocalvars too early. This patch fixes that by postponing the
poplocalvars for regular utilities until they have completed.
In order to ensure that local still works, it is now a special
built-in.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 27 May 2010 11:32:55 +0800
[VAR] Fix poplocalvar on abnormal exit from function
The new localvar code broke the abnormal exit from functions
and built-ins by not restoring the original localvar state.
This patch fixes this by storing the previous localvar state so
that we always unwind correctly in case of an abnormal exit.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 26 May 2010 18:54:19 +0800
[VAR] Replace cmdenviron with localvars
This patch replaces the cmdenviron mechanism for temporary command
variables with the localvars mechanism used by functions.
This reduces code size, and more importantly, makes the variable
assignment take effect immediately as required by POSIX.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
