msgid "B<free> displays the total amount of free and used physical and swap memory in the system, as well as the buffers and caches used by the kernel. The information is gathered by parsing /proc/meminfo. The displayed columns are:"
msgstr "B<free> виводить дані щодо загального об’єму вільної і використаної фізичної та резервної пам’яті у системі, а також буферів та кешів, що використовуються ядром. Збирання даних виконується за допомогою обробки даних /proc/meminfo. Серед показаних стовпчиків:"
msgid "Estimation of how much memory is available for starting new applications, without swapping. Unlike the data provided by the B<cache> or B<free> fields, this field takes into account page cache and also that not all reclaimable memory slabs will be reclaimed due to items being in use (MemAvailable in /proc/meminfo, available on kernels 3.14, emulated on kernels 2.6.27+, otherwise the same as B<free>)"
msgstr "Оцінка об’єму пам’яті, доступного для запуску нових програм, без використання резервної пам’яті на диску. На відміну від даних, які буде показано у полях B<cache> та B<free>, у цьому полі враховується кеш сторінок і те, що не усі придатні до повернення частини пам’яті буде повернуто через об’єкти, що перебувають у використанні (MemAvailable у /proc/meminfo, доступне у ядрах, починаючи з 3.14, емульоване, починаючи з ядра 2.6.27, інакше, те саме, що і B<free>)"
msgid "Show all output fields automatically scaled to shortest three digit unit and display the units of print out. Following units are used."
msgstr "Вивести вміст усіх полів з автоматичним масштабуванням до найбільшої цілої одиниці та показом використаних одиниць. Використовуються такі одиниці:"
msgid "If unit is missing, and you have exbibyte of RAM or swap, the number is in tebibytes and columns might not be aligned with header."
msgstr "Якщо одиницю не буде вказано і на комп’ютері встановлено ексбібайти оперативної або резервної пам’яті, дані буде показано у тебібайтах, ау стовпчиках може порушуватися вирівнювання із заголовком таблиці."
msgid "Switch to the wide mode. The wide mode produces lines longer than 80 characters. In this mode B<buffers> and B<cache> are reported in two separate columns."
msgstr "Перемкнути програму у режим широкого показу. У режимі широкого показу програма виводитиме рядки, довші за 80 символів. У цьому режимі значення B<buffers> та B<cache> виводитимуться у два окремих стовпчики."
msgid "Continuously display the result I<delay> seconds apart. You may actually specify any floating point number for I<delay> using either . or , for decimal point. B<usleep>(3) is used for microsecond resolution delay times."
msgstr "Неперервно виводити результати із інтервалом між оновленнями у вказану параметром I<затримка> кількість секунд. Фактично, ви можете вказати для I<затримки> дійсне число із крапкою або комою як роздільником дробової частини. Для визначення часу оновлення використовується B<usleep>(3) з точністю визначення моменту часу порядку мікросекунд."
msgid "Display a line showing the memory commit limit and amount of committed/uncommitted memory. The B<total> column on this line will display the memory commit limit. This line is relevant if memory overcommit is disabled."
msgstr "Вивести рядок із обмеженням на внесок до пам'яті та обсягом внесеної/невнесеної пам'яті. У стовпчику B<total> цього рядка буде показано обмеження на внесок до пам'яті. Цей рядок має значення, якщо вимкнено переповнення при внесення до пам'яті."
msgid "pgrep, pkill, pidwait - look up, signal, or wait for processes based on name and other attributes"
msgstr "pgrep, pkill, pidwait — пошук, надсилання сигналів процесам або очікування на завершення роботи процесів на основі даних щодо їхньої назви та інших атрибутів"
msgid "B<pgrep> looks through the currently running processes and lists the process IDs which match the selection criteria to stdout. All the criteria have to match. For example,"
msgstr "B<pgrep> виконує пошук серед поточних запущених процесів і виводить список ідентифікаторів процесів, які відповідають критерію вибору до stdout. Виконуватися мають усі критерії. Наприклад,"
msgid "Defines the signal to send to each matched process. Either the numeric or the symbolic signal name can be used. (B<pkill> only.)"
msgstr "Визначає сигнал для надсилання кожному відповідному процесу. Для визначення сигналу можна скористатися цифровим значенням або символічною назвою сигналу. (лише для B<pkill>.)"
msgid "Suppress normal output; instead print a count of matching processes. When count does not match anything, e.g. returns zero, the command will return non-zero value. Note that for pkill and pidwait, the count is the number of matching processes, not the processes that were successfully signaled or waited for."
msgstr "Придушити звичайне виведення. Замість цього, вивести кількість відповідних процесів. Якщо не вдасться знайти нічого, наприклад, буде повернуто нульове значення, програма поверне ненульове значення помилки. Зауважте, що для pkill і pidwait кількість є кількістю відповідних процесів, а не кількістю процесів, яким було успішно надіслано сигнал, або кількість процесів, на які очікувала програма."
msgid "Sets the string used to delimit each process ID in the output (by default a newline). (B<pgrep> only.)"
msgstr "Встановлює рядок, що використовуватиметься для відокремлення ідентифікаторів процесів у виведених даних (типовим роздільником є символ розриву рядка). (Лише B<pgrep>.)"
msgid "The I<pattern> is normally only matched against the process name. When B<-f> is set, the full command line is used."
msgstr "Зазвичай, відповідність I<взірця> встановлюється лише для назви процесу. Якщо використано B<-f>, відповідність встановлюється за цілим рядком команди."
msgid "Only match processes in the process group IDs listed. Process group 0 is translated into B<pgrep>'s, B<pkill>'s, or B<pidwait>'s own process group."
msgstr "Встановлювати відповідність процесів лише для вказаного списку ідентифікаторів груп. Група процесів 0 відповідає власній групі процесів B<pgrep>, B<pkill> або B<pidwait>."
msgid "Only match processes whose real group ID is listed. Either the numerical or symbolical value may be used."
msgstr "Встановлювати відповідність процесів зі списку справжніх ідентифікаторів груп. Можна використовувати цифрове або символічне значення ідентифікатора."
msgid "Only match processes whose process session ID is listed. Session ID 0 is translated into B<pgrep>'s, B<pkill>'s, or B<pidwait>'s own session ID."
msgstr "Встановлювати відповідність лише тих процесів, які мають ідентифікатори сеансів процесів зі вказаного списку. Ідентифікатор 0 відповідає ідентифікаторам сеансів самих програм B<pgrep>, B<pkill> або B<pidwait>."
msgid "Only match processes whose effective user ID is listed. Either the numerical or symbolical value may be used."
msgstr "Встановлювати відповідність процесів зі списку ідентифікаторів ефективних користувачів. Можна використовувати цифрове або символічне значення ідентифікатора."
msgid "Only match processes whose real user ID is listed. Either the numerical or symbolical value may be used."
msgstr "Встановлювати відповідність процесів зі списку справжніх ідентифікаторів користувачів. Можна використовувати цифрове або символічне значення ідентифікатора."
msgid "Negates the matching. This option is usually used in B<pgrep>'s or B<pidwait>'s context. In B<pkill>'s context the short option is disabled to avoid accidental usage of the option."
msgstr "Інвертує відповідність. Зазвичай, цей параметр використовується у контексті B<pgrep> або B<pidwait>. У контексті B<pkill> скорочену форму параметра вимкнено для того, щоб запобігти випадковому використанню цього параметра."
msgid "Shows all thread ids instead of pids in B<pgrep>'s or B<pidwait>'s context. In B<pkill>'s context this option is disabled."
msgstr "Показує усіх ідентифікатори потоків обробки, замість ідентифікаторів, у контексті B<pgrep> або B<pidwait>. У контексті B<pkill> цей параметр вимкнено."
msgid "Ignore all ancestors of B<pgrep>, B<pkill>, or B<pidwait>. For example, this can be useful when elevating with B<sudo> or similar tools."
msgstr "Ігнорувати усі попередники B<pgrep>, B<pkill> та B<pidwait>. Наприклад, це може бути корисним при розширенні прав доступу за допомогою B<sudo> або подібних інструментів."
msgid "Match processes that belong to the same namespaces. Required to run as root to match processes from other users. See B<--nslist> for how to limit which namespaces to match."
msgstr "Встановлювати відповідність процесів, які належать до одного простору назв. Для встановлення відповідності для процесів інших користувачів програму має бути запущено від імені користувача root. Див. довідку щодо B<--nslist>, щоб дізнатися про те, як обмежити перелік відповідних просторів назв."
msgid "Use B<sigqueue(3)> rather than B<kill(2)> and the value argument is used to specify an integer to be sent with the signal. If the receiving process has installed a handler for this signal using the SA_SIGINFO flag to B<sigaction(2)> , then it can obtain this data via the si_value field of the siginfo_t structure."
msgstr "Скористайтеся B<kill(2)> замість B<sigqueue(3)>, і аргумент значення, який використовується для задання цілого значення, буде надіслано разом із сигналом. Якщо у процесі, який його отримає, встановлено обробки сигналу, який використовує прапорець SA_SIGINFO B<sigaction(2)>, процес зможе отримати ці дані за допомогою поля si_value структури siginfo_t."
msgid "One or more processes matched the criteria. For pkill and pidwait, one or more processes must also have been successfully signalled or waited for."
msgstr "Вказаному критерію відповідає один або декілька процесів. Для pkill і pidwait також має бути один або декілька процесів, яким успішно надіслано сигнал або які перебувають у стані очікування."
msgid "The process name used for matching is limited to the 15 characters present in the output of /proc/I<pid>/stat. Use the B<-f> option to match against the complete command line, /proc/I<pid>/cmdline. Threads may not have the same process name as the parent process but will have the same command line."
msgstr "Назву процесу, що використовується для встановлення відповідності, обмежено 15 символами, які виводить /proc/I<pid>/stat. Для встановлення відповідності за цілим командним рядком, /proc/I<pid>/cmdline, скористайтеся параметром B<-f>. Потоки обробки можуть не мати такої самої назви процесу, що і батьківський процес, але матимуть той самий рядок команди."
msgid "Limit results to the given range to I<low> and I<high> address range. Notice that the low and high arguments are single string separated with comma."
msgstr "Обмежити результати вказаним діапазоном адрес від значення I<нижня межа> до значення I<верхня межа>. Зауважте, що аргументи нижньої і верхньої меж є одним рядком, значення у якому відокремлено комою."
msgid "Show even more details than the B<-x> option. WARNING: format changes according to I</proc/PID/smaps>"
msgstr "Показати додаткові подробиці, більші, ніж якщо використовується параметр B<-x>. ПОПЕРЕДЖЕННЯ: зміни у форматі відповідають змінам у I</proc/PID/smaps>."
msgid "B<uptime> gives a one line display of the following information. The current time, how long the system has been running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes."
msgstr "B<uptime> виводить у один рядок такі дані: поточний час, тривалість роботи системи, кількість користувачів, які працюють у системі, та середні значення навантаження на систему за останні 1, 5 та 15 хвилин."
msgid "System load averages is the average number of processes that are either in a runnable or uninterruptable state. A process in a runnable state is either using the CPU or waiting to use the CPU. A process in uninterruptable state is waiting for some I/O access, eg waiting for disk. The averages are taken over the three time intervals. Load averages are not normalized for the number of CPUs in a system, so a load average of 1 means a single CPU system is loaded all the time while on a 4 CPU system it means it was idle 75% of the time."
msgstr "Середні значення навантаження — це осереднені числові характеристики процесів, які перебувають у стані роботи абоу неперервному стані. Процес у стані роботи або використовує процесор або очікує на можливість використання процесора. Процес у неперервному стані очікує на якийсь доступ до каналів введення-виведення, наприклад, очікує на доступ до диска. Середні значення обчислюються за трьома часовими інтервалами. Середні навантаження нормалізуються на кількість процесорів у системі, отже, середнє навантаження у 1 у системі з одним процесором означає, що процесор завантажено увесь час, ау системі з 4 процесорами означає, що система перебуває у стані бездіяльності 75% часу."
msgid "B<uptime> was written by E<.UR greenfie@gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UE> and E<.UR johnsonm@sunsite.\\:unc.\\:edu> Michael K. Johnson E<.UE>"
msgstr "B<uptime> створено E<.UR greenfie@gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UE> та E<.UR johnsonm@sunsite.\\:unc.\\:edu> Michael K. Johnson E<.UE>"
msgid "The first report produced gives averages since the last reboot. Additional reports give information on a sampling period of length I<delay>. The process and memory reports are instantaneous in either case."
msgstr "Перший створений звіт надає середні дані з часу останнього перезавантаження. Наступні звіти надають дані щодо фрагмента часу, який визначається параметром I<затримка>. Дані звітів щодо процесів та споживання пам’яті відповідають моменту запуску програми."
msgid "The I<delay> between updates in seconds. If no I<delay> is specified, only one report is printed with the average values since boot."
msgstr "Значення I<затримки> між оновленнями у секундах. Якщо I<затримки> не визначено, програма виводить лише один звіт із середніми даними з часу перезавантаження."
msgid "Number of updates. In absence of I<count>, when I<delay> is defined, default is infinite."
msgstr "Кількість оновлень. Якщо значення I<число> не вказано і вказано значення I<затримка>, програма починає працювати у циклічному нескінченному режимі."
msgid "The B<-f> switch displays the number of forks since boot. This includes the fork, vfork, and clone system calls, and is equivalent to the total number of tasks created. Each process is represented by one or more tasks, depending on thread usage. This display does not repeat."
msgstr "За допомогою параметра B<-f> можна наказати програмі вивести кількість відгалужень з часу перезавантаження. Це стосується відгалужень, створених за допомогою викликів функцій fork, vfork та clone, і є еквівалентом загальної кількості створених завдань. Кожному процесу відповідає одне або декілька завдань, залежно від використання потоків обробки. Показ цього параметра під час повторних сеансів збирання даних не виконується."
msgid "Displays a table of various event counters and memory statistics. This display does not repeat."
msgstr "Вивести таблицю різноманітних лічильників подій та статистичних даних щодо споживання пам’яті. Показ цих даних під час повторних сеансів обробки даних не виконується."
msgid "Switches outputs between 1000 (I<k>), 1024 (I<K>), 1000000 (I<m>), or 1048576 (I<M>) bytes. Note this does not change the swap (si/so) or block (bi/bo) fields."
msgstr "Перемикає одиницю показу виведених даних між 1000 (I<k>), 1024 (I<K>), 1000000 (I<m>) та 1048576 (I<M>) байтами. Зауважте, що це не стосується полів резервної пам'яті (si/so) або блоків (bi/bo)."
msgid "Wide output mode (useful for systems with higher amount of memory, where the default output mode suffers from unwanted column breakage). The output is wider than 80 characters per line."
msgstr "Режим широкого виведення (корисний для систем з великим об’ємом пам’яті, де у типовому режимі виведення виникають проблеми із розбиттям даних за стовпчиками). У цьому режимі програма виводить понад 80 символів у рядок."
msgid "All linux blocks are currently 1024 bytes. Old kernels may report blocks as 512 bytes, 2048 bytes, or 4096 bytes."
msgstr "Розмір усіх блоків у linux у поточній версії дорівнює 1024 байтам. Старі версії ядер можуть повідомляти про блоки розміром 512 байтів, 2048 байтів або 4096 байтів."
msgid "Since procps 3.1.9, vmstat lets you choose units (k, K, m, M). Default is K (1024 bytes) in the default mode."
msgstr "Починаючи з версії procps 3.1.9, у vmstat передбачено можливість вибору одиниць виміру (k, K, m, M). Типовою одиницею у типовому режимі є K (1024 байтів)."
msgid "Five distinct interfaces are represented in this synopsis and named after the files they access in the /proc pseudo filesystem: B<diskstats>, B<meminfo>, B<slabinfo>, B<stat> and B<vmstat>."
msgstr "У цьому короткому описі представлено п'ять різних інтерфейсів, які названо за файлами, до яких вони надають доступ у фіктивній файловій системі /proc: B<diskstats>, B<meminfo>, B<slabinfo>, B<stat> та B<vmstat>."
msgid "The above functions and structures are generic but the specific B<named_interface> would also be part of any identifiers. For example, `procps_new' would actually be `procps_B<meminfo>_new' and `info' would really be `B<diskstats>_info', etc."
msgstr "Наведені вище функції і структури є загальними, але частиною будь-якого ідентифікатора може також бути специфічний запис B<іменований_інтерфейс>. Наприклад, «procps_new» може бути насправді «procps_B<meminfo>_new», а «info» може бути насправді «B<diskstats>_info» тощо."
msgid "Central to these interfaces is a simple `result' structure reflecting an `item' plus its value (in a union with standard C language types as members). All `result' structures are automatically allocated and provided by the library."
msgstr "Центральною для цих інтерфейсів є проста структура «result», яка визначає «item» і його значення (в об'єднання зі стандартними типами мови C, як учасниками). Усі структури «result» буде автоматично розподілено і надано бібліотекою."
msgid "By specifying an array of `items', these structures can be organized as a `stack', potentially yielding many results with a single function call. Thus, a `stack' can be viewed as a variable length record whose content and order is determined solely by the user."
msgstr "Заданням масиву значень «item» ці структури можна упорядкувати як «стек» із потенційним отримання багатьох результатів одним викликом функції. Таким чином, «стек» можна розглядати як запис змінної довжини, вміст якого та порядок записів у якому визначаються лише користувачем."
msgid "As part of each interface there are two unique enumerators. The `noop' and `extra' items exist to hold user values. They are never set by the library, but the `extra' result will be zeroed with each library interaction."
msgstr "Частиною кожного інтерфейсу є два унікальних лічильники. Для зберігання їхніх значень передбачено записи «noop» та «extra». Їхні значення ніколи не встановлюються бібліотекою, але результат «extra» буде занулено на початку кожної взаємодії із бібліотекою."
msgid "The B<named_interface> header file will be an essential document during user program development. There you will find available items, their return type (the `result' struct member name) and the source for such values. Additional enumerators and structures are also documented there."
msgstr "Базовим документом при розробці користувацької програми буде файл заголовків B<іменованого інтерфейсу>. Там ви знайдете усі доступні записи (item), тип, який вони повертають (назву члена структури «result») і джерело для таких значень. Також там наведено документацію щодо додаткових лічильників та структур."
msgid "The B<get> function is used to retrieve a `result' structure for a single `item'. Alternatively, a B<GET> macro is available when only the return value is of interest."
msgstr "Функцію B<get> призначено для отримання структури «result» для окремого «item». Крім того, можна скористатися макросом B<GET>, якщо потрібне лише значення, яке повертає функція."
msgid "For unpredictable variable outcomes, the B<diskstats>, B<slabinfo> and B<stat> interfaces export a B<reap> function. It is used to retrieve multiple `stacks' each containing multiple `result' structures. Optionally, a user may choose to B<sort> those results."
msgstr "Для непередбачуваних результатів для змінних інтерфейси B<diskstats>, B<slabinfo> і B<stat> експортують функцію B<reap>. Її використовують для отримання декількох «стеків», кожен з яких містить декілька структур «result». Крім того, користувач може наказати B<упорядкувати> (B<sort>) ці результати."
msgid "To exploit any `stack', and access individual `result' structures, a I<relative_enum> is required as shown in the B<VAL> macro defined in the header file. Such values could be hard coded as: 0 through numitems-1. However, this need is typically satisfied by creating your own enumerators corresponding to the order of the `items' array."
msgstr "Щоб скористатися будь-яким «stack» і отримати доступ до окремих структур «result», потрібен I<relative_enum>, як це показано у макросі B<VAL>, який визначено у файлі заголовка. ТАкі значення можна запрограмувати як: значення від 0 до numitems-1. Втім, цю потребу типово можна задовольнити створенням ваших власних лічильників, які відповідають порядку у масиві «items»."
msgid "For the B<new> and B<unref> functions, the address of an I<info> struct pointer must be supplied. With B<new> it must have been initialized to NULL. With B<unref> it will be reset to NULL if the reference count reaches zero."
msgstr "Для функцій B<new> і B<unref> має бути надано адресу вказівник структури I<info>. Із B<new> її має бути ініціалізовано значенням NULL. Із B<unref> її буде скинуто до NULL, якщо контрольний відлік дійде до нуля."
msgid "For the B<stat> interface, a I<what> parameter on the B<reap> function identifies whether data for just CPUs or both CPUs and NUMA nodes is to be gathered."
msgstr "Для інтерфейсу B<stat> параметр I<what> функції B<reap> вказує на те, чи слід збирати дані лише для процесорів або процесорів і вузлів NUMA."
msgid "To aid in program development, there is a provision that can help ensure `result' member references agree with library expectations. It assumes that a supplied macro in the header file is used to access the `result' value."
msgstr "Щоб допомогти у розробці програм, передбачено функцію, яка може допомогти забезпечити узгодженість посилань на члени «result» із очікуваннями бібліотеки. У цій функції передбачено, що наданий макрос у файлі заголовків буде використано для доступу до значення «result»."
msgid "This verification feature incurs substantial overhead. Therefore, it is important that it I<not> be activated for a production/release build."
msgstr "Використання цієї можливості перевірки призводить до суттєвих обчислювальних витрат. Через це, важливо I<не> вмикати її під час остаточного збирання або збирання програми для випуску."
msgid "Central to this interface is a simple `result' structure reflecting an `item' plus its value (in a union with standard C language types as members). All `result' structures are automatically allocated and provided by the library."
msgstr "Центральною для цього інтерфейсу є проста структура «result», яка визначає «item» і його значення (в об'єднання зі стандартними типами мови C, як учасниками). Усі структури «result» буде автоматично розподілено і надано бібліотекою."
msgid "By specifying an array of `items', these structures can be organized as a `stack', potentially yielding many results with a single function call. Thus, a `stack' can be viewed as a variable length record whose content and order is determined solely by the user. "
msgstr "Заданням масиву значень «item» ці структури можна упорядкувати як «стек» із потенційним отримання багатьох результатів одним викликом функції. Таким чином, «стек» можна розглядати як запис змінної довжини, вміст якого та порядок записів у якому визначаються лише користувачем."
#. type: Plain text
#: ../man/procps_pids.3:87
msgid "As part of this interface there are two unique enumerators. The `noop' and `extra' items exist to hold user values. They are never set by the library, but the `extra' result will be zeroed with each library interaction."
msgstr "Частиною цього інтерфейсу є два унікальних лічильники. Для зберігання їхніх значень передбачено записи «noop» та «extra». Їхні значення ніколи не встановлюються бібліотекою, але результат «extra» буде занулено на початку кожної взаємодії із бібліотекою."
#. type: Plain text
#: ../man/procps_pids.3:93
msgid "The pids.h file will be an essential document during user program development. There you will find available items, their return type (the `result' struct member name) and the source for such values. Additional enumerators and structures are also documented there."
msgstr "Базовим документом при розробці користувацької програми буде файл заголовків pids.h. Там ви знайдете усі доступні записи (item), тип, який вони повертають (назву члена структури «result») і джерело для таких значень. Також там наведено документацію щодо додаткових лічильників та структур."
msgid "Two functions support unpredictable variable outcomes. The B<reap> function gathers data for all processes while the B<select> function deals with specific PIDs or UIDs. Both can return multiple `stacks' each containing multiple `result' structures. Optionally, a user may choose to B<sort> such results"
msgstr "Для непередбачуваних результатів для змінних передбачено дві функції. Функція B<reap> збирає дані для усіх процесів, а функція B<select> працює зі специфічними PID та UID. Обидві можуть повертати декілька «стеків», кожне з яких містить декілька структур «result». Крім того, користувач може наказати B<упорядкувати> (B<sort>) ці результати."
#. type: Plain text
#: ../man/procps_pids.3:122
msgid "To exploit any `stack', and access individual `result' structures, a I<relative_enum> is required as shown in the B<VAL> macro defined in the header file. Such values could be hard coded as: 0 through numitems-1. However, this need is typically satisfied by creating your own enumerators corresponding to the order of the `items' array. "
msgstr "Щоб скористатися будь-яким «stack» і отримати доступ до окремих структур «result», потрібен I<relative_enum>, як це показано у макросі B<VAL>, який визначено у файлі заголовка. Такі значення можна запрограмувати так: значення від 0 до numitems-1. Втім, цю потребу типово можна задовольнити створенням ваших власних лічильників, які відповідають порядку у масиві «items». "
msgid "The E<lt>pidsE<gt> API differs from others in that those items of interest must be provided at B<new> or B<reset> time, the latter being unique to this API. If either the I<items> or I<numitems> parameter is zero at B<new> time, then B<reset> becomes mandatory before issuing any other call."
msgstr "Програмний інтерфейс E<lt>pidsE<gt> відрізняється від інших тим, що потрібні записи має бути надано під час виконання B<new> або B<reset>, останній варіант є унікальним для цього програмного інтерфейсу. Якщо якийсь із параметрів, I<items> або I<numitems>, є нульовим на час B<new>, обов'язковим перед надсиланням будь-якого іншого виклику стає B<reset>."
msgid "For the B<new> and B<unref> functions, the address of an I<info> struct pointer must be supplied. With B<new> it must have been initialized to NULL. With B<unref> it will be reset to NULL if the reference count reaches zero. "
msgstr "Для функцій B<new> і B<unref> має бути надано адресу вказівник структури I<info>. Із B<new> її має бути ініціалізовано значенням NULL. Із B<unref> її буде скинуто до NULL, якщо контрольний відлік дійде до нуля. "
msgid "The B<get> and B<reap> functions use the I<which> parameter to specify whether just tasks or both tasks and threads are to be fetched."
msgstr "Функції B<get> і B<reap> використовують параметр I<which> для визначення того, слід отримувати дані лише для завдань чи для завдань і потоків обробки."
msgid "The B<select> function requires an array of PIDs or UIDs as I<these> along with I<numthese> to identify which processes are to be fetched. This function then operates as a subset of B<reap>."
msgstr "Функція B<select> потребує масиву PID або UID, як I<these> разом із I<numthese>, для визначення того, дані яких процесів слід отримати. Далі, ця функція працює із підмножиною B<reap>."
msgid "Lastly, a B<fatal_proc_unmounted> function may be called before any other function to ensure that the /proc/ directory is mounted. As such, the I<info> parameter would be NULL and the I<return_self> parameter zero. If, however, some items are desired for the issuing program (a I<return_self> other than zero) then the B<new> call must precede it to identify the I<items> and obtain the required I<info> pointer."
msgstr "Нарешті, можна викликати функцію B<fatal_proc_unmounted> до будь-якої іншої функції для забезпечення монтування каталогу /proc/. Якщо каталог змонтовано, параметр I<info> матиме значення NULL, а параметр I<return_self> матиме нульове значення. Якщо, втім, деякі записи потрібні для запуску програми (I<return_self> відмінне від нуля), виклик B<new> має передувати виклику цієї функції для того, щоб вказати I<items> і отримати потрібний вказівник I<info>."
msgid "Success is indicated by a pointer to the named structure. However, if one survives the B<fatal_proc_unmounted> call, NULL is always returned when I<return_self> is zero."
msgstr "На успіх вказує повернення вказівника на іменовану структуру. Втім, якщо щось переживе виклик B<fatal_proc_unmounted>, NULL завжди буде повернуто, якщо значенням I<return_self> є нуль."
msgid "The first is a supplied file named `libproc.supp' which may be useful when developing a I<multi-threaded> application. When used with the valgrind `--suppressions=' option, warnings associated with the procps library itself are avoided."
msgstr "Першою є файл із назвою «libproc.supp», яким можна скористатися при розробці I<багатопотокової> програми. Якщо скористатися ним у поєднанні із параметром valgrind «--suppressions=», можна уникнути виведення попереджень, які пов'язано із самою бібліотекою procps."
msgid "Such warnings arise because the library handles heap based allocations in a thread-safe manner. A I<single-threaded> application will not receive those warnings."
msgstr "Такі попередження виникають через те, що бібліотека обробляє засновані на «купі» функції отримання пам'яті у безпечний щодо потоків обробки спосіб. I<Однопотокові> програми не призводитимуть до появи таких попереджень."
msgid "The second provision can help ensure `result' member references agree with library expectations. It assumes that a supplied macro in the header file is used to access the `result' value."
msgstr "Друга функція може допомогти забезпечити узгодженість посилань на члени «result» із очікуваннями бібліотеки. У цій функції передбачено, що наданий макрос у файлі заголовків буде використано для доступу до значення «result»."
msgid "This verification feature incurs substantial overhead. Therefore, it is important that it I<not> be activated for a production/release build. "
msgstr "Використання цієї можливості перевірки призводить до суттєвих обчислювальних витрат. Через це, важливо I<не> вмикати її під час остаточного збирання або збирання програми для випуску. "
msgid "This will hide kernel threads which would otherwise be returned with a B<procps_pids_get>, B<procps_pids_select> or B<procps_pids_reap> call."
msgstr "Призведе до приховування потоків обробки ядра, які інакше було б повернуто викликом B<procps_pids_get>, B<procps_pids_select> або B<procps_pids_reap>."
msgid "B<procps_hertz_get>() returns the number of clock ticks per second as B<sysconf(>I<_SC_CLK_TCK>B<)> or an assumed I<100>. Dividing tics by this value yields seconds."
msgstr "B<procps_hertz_get>() повертає кількість тактів годинника на секунду як B<sysconf(>I<_SC_CLK_TCK>B<)> або типове значення I<100>. Якщо поділити такти на це значення, буде отримано секунди."
msgid "B<procps_pid_length>() returns the maximum string length for a PID on the system. For example, if the largest possible PID value on was 123, then the length would be 3. If the file I</proc/sys/kernel/pid_max> is unreadable, the value is assumed to be I<5>."
msgstr "B<procps_pid_length>() повертає максимальну довжину рядка для PID у системі. Наприклад, якщо найбільше можливе значення PID — 123, довжиною буде 3. Якщо файл I</proc/sys/kernel/pid_max> виявиться недоступним до читання, типовим значенням буде I<5>."
msgid "B<procps_linux_version>() returns the current Linux version as an encoded integer. On non-Linux systems that have an emulated proc filesystem this function returns the version of the Linux emulation instead. The version consists of three positive integers representing the major, minor and patch levels. The following macros are provided for encoding a given Linux version or separating out the components of the current version."
msgstr "B<procps_linux_version>() повертає версію поточної системи Linux у форматі закодованого цілого числа. У системах, відмінних від Linux, із імітацією файлової системи proc ця функція повертає версію емуляції Linux. Версія складається з трьох додатних цілих чисел, які відповідають основній, проміжній частинам і частині модифікації. Передбачено вказані нижче макроси для кодування заданої версії Linux або окремого використання компонентів поточної версії."
msgid "B<procps_loadavg>() fetches the system load average and puts the 1, 5 and 15 minute averages into location(s) specified by any pointer which is not I<NULL>."
msgstr "B<procps_loadavg>() отримує дані щодо середнього навантаження на систему і записує середні значення за 1, 5 і 15 хвилин у місця, які вказано будь-яким вказівником, який не є порожнім (I<NULL>)."
msgid "B<procps_uptime>() returns uptime and/or idle seconds into location(s) specified by any pointer which is not I<NULL>. The B<sprint> varieties return a human-readable string in one of two forms."
msgstr "B<procps_uptime>() повертає час роботи і/або бездіяльності у секундах у місця, які вказано будь-яким вказівником, який не є порожнім (I<NULL>). Використання форматування B<sprint> повертає рядок у зручному для читання форматі в одній із двох форм."
msgid "B<procps_ns_read_pid>() returns the inodes for the namespaces of the given process in the procps_ns structure pointed to by I<nsp>. Those inodes will appear in the order proscribed by enum namespace_type."
msgstr "B<procps_ns_read_pid>() повертає inode-и для просторів назв із заданим процесом у структурі procps_ns на яку вказує I<nsp>. Ці inode-и буде виведено у порядку, який визначається переліком namespace_type."
#~ msgid "The default signal for kill is TERM. Use B<-l> or B<-L> to list available signals. Particularly useful signals include HUP, INT, KILL, STOP, CONT, and 0. Alternate signals may be specified in three ways: B<-9>, B<-SIGKILL> or B<-KILL>. Negative PID values may be used to choose whole process groups; see the PGID column in ps command output. A PID of B<-1> is special; it indicates all processes except the kill process itself and init."
#~ msgstr "Типовим сигналом для kill є TERM. Для отримання списку доступних сигналів скористайтеся параметром B<-l> або B<-L>. Зокрема, корисними сигналами є HUP, INT, KILL, STOP, CONT та 0. Сигнали можна вказати у три способи: B<-9>, B<-SIGKILL> або B<-KILL>. Для вибору цілих груп процесів можна використовувати від’ємні значення PID; див. стовпчик PGID у виведенні команди ps. PID для B<-1> є особливим; він позначає усі процеси, окрім самого процесу kill та процесу init."
#~ msgid "Specify the B<signal> to be sent. The signal can be specified by using name or number. The behavior of signals is explained in B<signal>(7) manual page."
#~ msgstr "Вказати B<сигнал>, який слід надіслати. Сигнал може бути вказано за допомогою назви сигналу або його номера. Поведінку сигналів описано на сторінці підручника B<signal>(7)."
#~ msgid "List signal names. This option has optional argument, which will convert signal number to signal name, or other way round."
#~ msgstr "Вивести список сигналів. У цього параметра є необов’язковий аргумент, за допомогою якого можна перетворювати номер сигналу на назву і навпаки."
#~ msgid "Your shell (command line interpreter) may have a built-in kill command. You may need to run the command described here as /bin/kill to solve the conflict."
#~ msgstr "У вашій оболонці (інтерпретаторі командного рядка) може бути вбудована команда kill. Щоб позбутися конфлікту команд, вам слід запускати описану тут команду як /bin/kill."
#~ msgid "E<.MT albert@users.sf.net> Albert Cahalan E<.ME> wrote kill in 1999 to replace a bsdutils one that was not standards compliant. The util-linux one might also work correctly."
#~ msgstr "Kill створено E<.MT albert@users.sf.net> Albert Cahalan E<.ME> у 1999 році для заміни відповідної програми з bsdutils, яка не була сумісною зі стандартами. Програма зі складу util-linux також може працювати належним чином."
#~ msgid "B<Pidof> finds the process id's (pids) of the named programs. It prints those id's on the standard output."
#~ msgstr "B<Pidof> виконує пошук ідентифікаторів процесів (pids) вказаних програм. Дані щодо виявлених ідентифікаторів буде виведено до стандартного виведення."
#~ msgid "Only return process ids that are running with the same root directory. This option is ignored for non-root users, as they will be unable to check the current root directory of processes they do not own."
#~ msgstr "Повернути лише ідентифікатори тих процесів, які працюють у тому самому кореневому каталозі. Цей параметр буде проігноровано, якщо програму запущено від імені користувачів, відмінних від користувача root, оскільки таким користувачам не дозволено доступ до перевірки поточного кореневого каталогу процесів, власниками яких вони не є."
#~ msgid "Tells I<pidof> to omit processes with that process id. The special pid B<%PPID> can be used to name the parent process of the I<pidof> program, in other words the calling shell or shell script."
#~ msgstr "Наказує I<pidof> пропускати процеси із вказаним ідентифікатором. Спеціальним ідентифікатором процесу B<%PPID> можна скористатися для визначення батьківського процесу програми I<pidof>, інакше кажучи, оболонки або скрипту оболонки, за допомогою якого було викликано програму."
#~ msgid "Use I<separator> as a separator put between pids. Used only when more than one pids are printed for the program. The B<-d> option is an alias for this option for sysvinit B<pidof> compatibility."
#~ msgstr "Скористатися роздільником I<роздільник> як роздільником записів ідентифікаторів процесів. Використовується, лише якщо програма виводить декілька ідентифікаторів процесів. Параметр B<-d> є альтернативним варіантом запису цього параметра, призначеним для сумісності B<pidof> з sysvinit."
#~ msgid "When using the I<-x> option, B<pidof> only has a simple method for detecting scripts and will miss scripts that, for example, use env. This limitation is due to how the scripts look in the proc filesystem."
#~ msgstr "Якщо використано параметр I<-x>, B<pidof> зможе використовувати лише простий спосіб виявлення скриптів і не зможе скористатися скриптами, у яких, наприклад, використано env. Це обмеження пов'язано із тим, як виглядають скрипти з точки зору файлової системи процесів."
#~ msgid "These tools are obsolete and unportable. The command syntax is poorly defined. Consider using the killall, pkill, and pgrep commands instead."
#~ msgstr "Ці програми є застарілими і непридатними до портування. Синтаксис відповідних команд є погано визначеним. Вам варто користуватися замість них програмами killall, pkill та pgrep."
#~ msgid "The default signal for skill is TERM. Use -l or -L to list available signals. Particularly useful signals include HUP, INT, KILL, STOP, CONT, and 0. Alternate signals may be specified in three ways: -9 -SIGKILL -KILL."
#~ msgstr "Типовим сигналом для skill є TERM. Скористайтеся -l або -L для отримання списку сигналів. Зокрема, корисними сигналами є HUP, INT, KILL, STOP, CONT та 0. Інші сигнали може бути вказано у три способи: -SIGKILL -KILL -9."
#~ msgid "The default priority for snice is +4. Priority numbers range from +20 (slowest) to -20 (fastest). Negative priority numbers are restricted to administrative users."
#~ msgstr "Типовим рівнем пріоритетності для snice є +4. Рівням відповідають числа від +20 (найнижчий) до -20 (найвищий). Від’ємними значеннями можуть скористатися лише користувачі з адміністративними правами доступу."
#~ msgid "Selection criteria can be: terminal, user, pid, command. The options below may be used to ensure correct interpretation."
#~ msgstr "Критеріями вибору можуть бути такі значення: terminal, user, pid, command. Наведені нижче параметри може бути використано для забезпечення належної інтерпретації."
#~ msgid "list which namespaces will be considered for the --ns option. Available namespaces: ipc, mnt, net, pid, user, uts."
#~ msgstr "Вивести список просторів назв, які використовуватимуться для обробки з параметром --ns. Можливі простори назв: ipc, mnt, net, pid, user, uts."
#~ msgid "B<slabtop> displays detailed kernel slab cache information in real time. It displays a listing of the top caches sorted by one of the listed sort criteria. It also displays a statistics header filled with slab layer information."
#~ msgstr "Програма B<slabtop> показує докладні дані щодо кешу частин ядра у режимі реального часу. Буде показано верхню частину списку, упорядкованого за одним з критеріїв. Також буде показано заголовок із даними щодо шару частин."
#~ msgid "Normal invocation of B<slabtop> does not require any options. The behavior, however, can be fine-tuned by specifying one or more of the following flags:"
#~ msgstr "Якщо B<slabtop> використовується у звичайному режимі, програма не потребує додаткових параметрів. Втім, поведінку програми можна змінити додаванням до рядка команди одного або декількох параметрів:"
#~ msgid "The following are valid sort criteria used to sort the individual slab caches and thereby determine what are the \"top\" slab caches to display. The default sort criteria is to sort by the number of objects (\"o\")."
#~ msgstr "Нижче наведено коректні критерії упорядковування, що використовуються для окремих кешів частин, а отже, визначають, які кеші частин перебуватимуть у верхній частині показаного списку. Типовий критерієм упорядковування є кількість об’єктів («o»)."
#~ msgid "B<slabtop> accepts keyboard commands from the user during use. The following are supported. In the case of letters, both cases are accepted."
#~ msgstr "Під час роботи програма B<slabtop> сприймає команди користувача, віддані за допомогою клавіатури. Нижче вказано список підтримуваних команд. У випадку команд-літер можна використовувати як великі, так і маленькі літери."
#~ msgid "Each of the valid sort characters are also accepted, to change the sort routine. See the section B<SORT CRITERIA>."
#~ msgstr "Передбачено можливість використання кожного із коректних символів упорядковування, призначених для зміни критерію. Докладніший опис цих символів наведено у розділі B<КРИТЕРІЇ УПОРЯДКОВУВАННЯ>."
#~ msgid "Currently, B<slabtop> requires a 2.4 or later kernel (specifically, a version 1.1 or later I</proc/slabinfo>). Kernel 2.2 should be supported in the future."
#~ msgstr "Для роботи поточної версії програми B<slabtop> потрібне ядро системи версії 2.4 або новішої (зокрема, версія 1.1 або новіша I</proc/slabinfo>). Підтримку ядер 2.2 має бути передбачено у майбутніх версіях."
#~ msgid "The B<slabtop> statistic header is tracking how many bytes of slabs are being used and is not a measure of physical memory. The 'Slab' field in the /proc/meminfo file is tracking information about used slab physical memory."
#~ msgstr "Заголовок статистичних даних B<slabtop> містить дані щодо того, скільки байтів частин використовується, а не виміри об’єму фізичної пам’яті. Поточні дані щодо використаної частинами фізичної пам’яті зберігаються у полі «Slab» файла /proc/meminfo."
#~ msgid "B<sysctl> is used to modify kernel parameters at runtime. The parameters available are those listed under /proc/sys/. Procfs is required for B<sysctl> support in Linux. You can use B<sysctl> to both read and write sysctl data."
#~ msgstr "B<sysctl> використовується для внесення зміни до параметрів ядра під час роботи. Доступними для зміни параметрами є параметри зі списку у /proc/sys/. Для підтримки роботи B<sysctl> у Linux потрібна procfs. B<sysctl> можна скористатися для читання і запису даних sysctl."
#~ msgid "To set a key, use the form I<variable>=I<value> where I<variable> is the key and I<value> is the value to set it to. If the value contains quotes or characters which are parsed by the shell, you may need to enclose the value in double quotes."
#~ msgstr "Для встановлення значення ключа скористайтеся записом у форматі I<змінна>=I<значення>, де I<змінна> є назвою ключа, а I<значення> — значення, яке слід встановити. Якщо у значенні містяться лапки або символи, які обробляються командною оболонкою, ви можете взяти значення у подвійні лапки."
#~ msgid "Load in sysctl settings from the file specified or /etc/sysctl.conf if none given. Specifying - as filename means reading data from standard input. Using this option will mean arguments to B<sysctl> are files, which are read in the order they are specified. The file argument may be specified as regular expression."
#~ msgstr "Завантажити параметри sysctl із вказаного файла або із /etc/sysctl.conf, якщо файл не вказано. Якщо вказати замість назви файла -, дані буде прочитано із стандартного джерела вхідних даних. Використання цього параметра означає, що аргументами B<sysctl> є файли, які буде прочитано у порядку, у якому їх було вказано. Аргумент файла може бути вказано у форматі формального виразу."
#~ msgid "Load settings from all system configuration files. Files are read from directories in the following list in given order from top to bottom. Once a file of a given filename is loaded, any file of the same name in subsequent directories is ignored."
#~ msgstr "Завантажити параметри з усіх файлів налаштувань системи. Файли буде прочитано з каталогів у вказаному списку у вказаному порядку, згори вниз. Після завантаження файла із вказаною назвою усі інші файли із такою самою назвою, які зберігаються у інших каталогах, буде проігноровано."
#~ msgid "The B<base_reachable_time> and B<retrans_time> are deprecated. The B<sysctl> command does not allow changing values of these parameters. Users who insist to use deprecated kernel interfaces should push values to /proc file system by other means. For example:"
#~ msgstr "Параметри B<base_reachable_time> та B<retrans_time> вважаються застарілими. Програма B<sysctl> не дозволяє змінювати значення цих параметрів. Користувачі, які вважають за потрібне використовувати застарілі інтерфейси ядра, мають змінювати значення у файловій системі /proc у інший спосіб. Приклад:"
#~ msgid "Note that blank lines are ignored, and whitespace before and after a token or value is ignored, although a value can contain whitespace within. Lines which begin with a I<#> or I<;> are considered comments and ignored."
#~ msgstr "Зауважте, що порожні рядки буде проігноровано так само, як пробіли перед і після ключа або значення, хоча самі значення можуть містити пробіли. Рядки, що починаються із символу I<#> або I<;> вважатимуться коментарями і ігноруватимуться."
#~ msgid "As the B</etc/sysctl.conf> file is used to override default kernel parameter values, only a small number of parameters is predefined in the file. Use I</sbin/sysctl\\ -a> or follow B<sysctl>(8) to list all possible parameters. The description of individual parameters can be found in the kernel documentation."
#~ msgstr "Оскільки файл B</etc/sysctl.conf> використовується для перевизначення типових значень параметрів ядра, у цьому файлі попередньо визначається лише незначна кількість параметрів. Щоб ознайомитися зі списком усіх можливих параметрів, скористайтеся командою I</sbin/sysctl\\ -a> або підручником із B<sysctl>(8). Опис окремих параметрів можна знайти у документації до ядра системи."
#~ msgid "B<tload> prints a graph of the current system load average to the specified I<tty> (or the tty of the B<tload> process if none is specified)."
#~ msgstr "B<tload> виводить графік поточних середніх значень навантаження на систему до вказаного I<tty> (або tty процесу B<tload>, якщо термінала не вказано)."
#~ msgid "The scale option allows a vertical scale to be specified for the display (in characters between graph ticks); thus, a smaller value represents a larger scale, and vice versa."
#~ msgstr "За допомогою параметра масштабування можна встановити вертикальний масштаб показу (у символах між позначками на графіку). Менше значення відповідає більшому масштабу, а більше значення меншому масштабу."
#~ msgid "The B<-d>I< delay> option sets the time argument for an B<alarm>(2); if -d 0 is specified, the alarm is set to 0, which will never send the B<SIGALRM> and update the display."
#~ msgstr "Параметр B<-d>I< затримка> встановлює значення аргументу часу для програми B<alarm>(2). Якщо вказано параметр -d 0, затримку сигналу буде встановлено рівною 0, що скасує надсилання сигналу B<SIGALRM> і оновлення показаних даних."
#~ msgid "B<w> displays information about the users currently on the machine, and their processes. The header shows, in this order, the current time, how long the system has been running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes."
#~ msgstr "B<w> виводить дані щодо поточних користувачів системи та процесів, власниками яких вони є. У заголовку виведених даних наведено: поточний час, тривалість роботи системи, кількість користувачів, які працюють у системі, та середнє навантаження на систему за останні 1, 5 та 15 хвилин."
#~ msgid "The following entries are displayed for each user: login name, the tty name, the remote host, login time, idle time, JCPU, PCPU, and the command line of their current process."
#~ msgstr "Для кожного користувача буде показано такі дані: назву облікового запису, назву tty, віддалений вузол, час входу до системи, час бездіяльності, JCPU, PCPU та рядок команди поточного процесу."
#~ msgid "The JCPU time is the time used by all processes attached to the tty. It does not include past background jobs, but does include currently running background jobs."
#~ msgstr "Час JCPU є часом, використаним усіма процесами, пов’язаними із терміналом tty. До нього не включено час виконання завершених фонових завдань, але включено час виконання поточних фонових завдань."
#~ msgid "Ignores the username while figuring out the current process and cpu times. To demonstrate this, do a B<su> and do a B<w> and a B<w -u>."
#~ msgstr "Ігнорувати ім’я користувача під час визначення поточного процесу та часу використання процесора. Побачити різницю можна після виконання команди B<su> у даних, виведених командами B<w> та B<w -u>."
#~ msgid "Toggle printing the B<from> (remote hostname) field. The default as released is for the B<from> field to not be printed, although your system administrator or distribution maintainer may have compiled a version in which the B<from> field is shown by default."
#~ msgstr "Увімкнути виведення поля B<з> (назви віддаленого вузла). У типовому варіанті програми поле B<з> не виводиться. Втім, адміністратор вашої системи або супровідник дистрибутива може зібрати версію, у якій типово вміст поля B<з> виводиться."
#~ msgid "B<w> was re-written almost entirely by Charles Blake, based on the version by E<.UR greenfie@\\:gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UE> and E<.UR johnsonm@\\:redhat.\\:com> Michael K. Johnson E<.UE>"
#~ msgstr "B<w> майже повністю переписано з «нуля» Charles Blake на основі версії, створеної E<.UR greenfie@\\:gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UE> та E<.UR johnsonm@\\:redhat.\\:com> Michael K. Johnson E<.UE>"
#~ msgid "B<watch> runs I<command> repeatedly, displaying its output and errors (the first screenfull). This allows you to watch the program output change over time. By default, I<command> is run every 2 seconds and B<watch> will run until interrupted."
#~ msgstr "B<watch> виконує I<команду> регулярно, показує виведені нею дані та повідомлення щодо помилок (перший екран). За B<watch> ви зможете спостерігати за змінами у виведених даних із часом. Типово, запуск програми I<команда> відбуватиметься кожні 2 секунди, аж доки роботу B<watch> не буде перервано."
#~ msgid "Highlight the differences between successive updates. If the optional I<permanent> argument is specified then B<watch> will show all changes since the first iteration."
#~ msgstr "Позначити відмінності між двома послідовними запусками. Якщо задано необов'язковий аргумент I<permanent>, B<watch> покаже усі зміни із часу першого запуску."
#~ msgid "Specify update interval. The command will not allow quicker than 0.1 second interval, in which the smaller values are converted. Both '.' and ',' work for any locales. The WATCH_INTERVAL environment can be used to persistently set a non-default interval (following the same rules and formatting)."
#~ msgstr "Визначити інтервал між запусками. Найменшим є інтервал у 0,1 секунди. Якщо ви вкажете менше значення, використовуватиметься інтервал у 0,1 секунди. У всіх локалях працюють і «.» і «,». Для постійного визначення нетипового інтервалу можна скористатися змінною середовища WATCH_INTERVAL (для неї використовуються ті самі правила і форматування)."
#~ msgid "Make B<watch> attempt to run I<command> every B<--interval> I<seconds>. Try it with B<ntptime> (if present) and notice how the fractional seconds stays (nearly) the same, as opposed to normal mode where they continuously increase."
#~ msgstr "Наказати B<watch> запускати I<command> кожні B<--interval> I<секунд>. Спробуйте з B<ntptime> (якщо є) і зауважте, що дробові частки секунд залишаються (майже) незмінними, на відміну від звичайного режиму, коли значення неперервно зростають."
#~ msgid "Getting child process return value with B<waitpid>(2) failed, or command exited up on error."
#~ msgstr "Спроба отримання значення виходу дочірнього процесу за допомогою B<waitpid>(2) зазнала невдачі або команда завершила роботу повідомлення про помилку."
#~ msgid "POSIX option processing is used (i.e., option processing stops at the first non-option argument). This means that flags after I<command> don't get interpreted by B<watch> itself."
#~ msgstr "Спосіб обробки параметрів POSIX (тобто обробка параметрів завершується на першому з аргументів, який не є параметром). Це означає, що параметри після I<команди> не оброблятимуться самою програмою B<watch>."
#~ msgid "Upon terminal resize, the screen will not be correctly repainted until the next scheduled update. All B<--differences> highlighting is lost on that update as well."
#~ msgstr "Після зміни розмірів вікна термінала, дані не буде належним чином переформатовано до наступного запланованого оновлення. Також буде втрачено усі позначення, отримані за допомогою параметра B<--differences>."
#~ msgid "Non-printing characters are stripped from program output. Use B<cat -v> as part of the command pipeline if you want to see them."
#~ msgstr "Непридатні до виведення символи буде усунуто із даних, виведених програмою. Якщо ви хочете побачити ці символи, скористайтеся B<cat -v> у послідовності команд, створеній за допомогою символу каналу (|)."
#~ msgid "Combining Characters that are supposed to display on the character at the last column on the screen may display one column early, or they may not display at all."
#~ msgstr "Символи поєднання, які мало бути показано на позиції у останньому стовпчику на екрані, може бути показано на стовпчик раніше або взагалі не показано."
#~ msgid "Combining Characters never count as different in B<--differences> mode. Only the base character counts."
#~ msgstr "Символи поєднання ніколи не враховуються під час визначення відмінностей, якщо використано параметр B<--differences>. До уваги беруться лише основні символи."
#~ msgid "B<--precise> mode doesn't yet have advanced temporal distortion technology to compensate for a I<command> that takes more than B<--interval> I<seconds> to execute. B<watch> also can get into a state where it rapid-fires as many executions of I<command> as it can to catch up from a previous executions running longer than B<--interval> (for example, B<netstat> taking ages on a DNS lookup)."
#~ msgstr "У режимі B<--precise> ще не передбачено технології розширеного викривлення часу для компенсації проблем із I<командою>, виконання якої триває понад B<--interval> I<секунд>. Крім того, B<watch> може перейти у режим, коли програма швидко намагається запустити якомога більше екземплярів I<команди> для того, щоб «наздогнати» план за попередніми запусками, виконання яких тривало понад B<--interval> (наприклад, виконання команди B<netstat> під час пошуку у DNS може тривати дуже довго)."
#~ msgid "(Note that B<-p> isn't guaranteed to work across reboots, especially in the face of B<ntpdate> (if present) or other bootup time-changing mechanisms)"
#~ msgstr "(Зауважте, що роботу з B<-p> під час перезавантаження не гарантовано, особливо з врахуванням використання B<ntpdate> (якщо є) та інших механізмів зміни часових даних.)"
#~ msgid "B<ps> displays information about a selection of the active processes. If you want a repetitive update of the selection and the displayed information, use B<top> instead."
#~ msgstr "B<ps> показує відомості щодо вибраного набору активних процесів. Якщо вам потрібне регулярне оновлення вибору та показаних даних, скористайтеся замість цієї програми програмою B<top>."
#~ msgid "Options of different types may be freely mixed, but conflicts can appear. There are some synonymous options, which are functionally identical, due to the many standards and B<ps> implementations that this B<ps> is compatible with."
#~ msgstr "Параметри різних типів можна поєднувати довільним чином, але можуть виникнути конфлікти. Існує декілька параметрів однакового призначення, які є функціонально ідентичним. Причиною є одночасна наявність багатьох стандартів і реалізацій B<ps>, з якими є сумісною ця версія B<ps>."
#~ msgid "Note that B<ps -aux> is distinct from B<ps\\ aux>. The POSIX and UNIX standards require that B<ps\\ -aux> print all processes owned by a user named I<x>, as well as printing all processes that would be selected by the B<-a> option. If the user named I<x> does not exist, this B<ps> may interpret the command as B<ps\\ aux> instead and print a warning. This behavior is intended to aid in transitioning old scripts and habits. It is fragile, subject to change, and thus should not be relied upon."
#~ msgstr "Зауважте, що B<ps -aux> не є тим самим, що і B<ps\\ aux>. Стандарти POSIX і UNIX вимагають, щоб команда B<ps\\ -aux> виводила список усіх процесів, власником яких є користувач I<x>, а також усіх процесів, які було б вибрано у результаті використання параметра B<-a>. Якщо запису користувача I<x> не існує, цей варіант B<ps> може обробити команду як B<ps\\ aux> і вивести попередження щодо цього. Так зроблено навмисне, щоб допомогти у сумісності із застарілими скриптами та звичками. Така поведінка програми не є сталою, може змінитися — не варто на неї покладатися."
#~ msgid "By default, B<ps> selects all processes with the same effective user ID (euid=EUID) as the current user and associated with the same terminal as the invoker. It displays the process ID (pid=PID), the terminal associated with the process (tname=TTY), the cumulated CPU time in [DD-]hh:mm:ss format (time=TIME), and the executable name (ucmd=CMD). Output is unsorted by default."
#~ msgstr "Типово, B<ps> вибирає усі процеси із тим самим ідентифікатором ефективного користувача (euid=EUID), що іу поточного користувача, а також ті процеси, які пов'язано із тим самим терміналом, звідки викликано програму. Програма виводить ідентифікатор процесу (pid=PID), термінал, який пов'язано із процесом (tname=TTY), накопичений час процесора у форматі [ДД-]гг:хх:сс (time=TIME) та назву виконуваного файла (ucmd=CMD). Типово, виведені дані не упорядковуються."
#~ msgid "The use of BSD-style options will add process state (stat=STAT) to the default display and show the command args (args=COMMAND) instead of the executable name. You can override this with the B<PS_FORMAT> environment variable. The use of BSD-style options will also change the process selection to include processes on other terminals (TTYs) that are owned by you; alternately, this may be described as setting the selection to be the set of all processes filtered to exclude processes owned by other users or not on a terminal. These effects are not considered when options are described as being \"identical\" below, so B<-M> will be considered identical to B<Z> and so on."
#~ msgstr "Використання параметрів у стилі BSD додасть стан процесу (stat=STAT) до типового набору для показу і показ аргументів команди (args=COMMAND) замість назви виконуваного файла. Ви можете перевизначити це за допомогою змінної середовища B<PS_FORMAT>. Використання параметрів у стилі BSD також змінить вибір процесів — буде включено процеси з інших терміналів (TTY), власником яких ви є; крім того, це може бути описано як встановлення набору усіх процесів, які фільтровано для виключення процесів, власником яких є інші користувачі або не у терміналі. Ці ефекти не буде взято до уваги для параметрів, які описано нижче як «тотожні», отже, B<-M> вважатиметься тотожним до B<Z> тощо."
#~ msgid "Except as described below, process selection options are additive. The default selection is discarded, and then the selected processes are added to the set of processes to be displayed. A process will thus be shown if it meets any of the given selection criteria."
#~ msgstr "Окрім вказаних нижче випадків, параметри вибору процесів є адитивними. Типовий вибір буде відкинуто, а потім вибрані процеси буде додано до набору процесів, які слід показати. Таким чином, процес буде показано, якщо він буде відповідати усім заданим критеріям."
#~ msgid "Lift the BSD-style \"only yourself\" restriction, which is imposed upon the set of all processes when some BSD-style (without \"-\") options are used or when the B<ps> personality setting is BSD-like. The set of processes selected in this manner is in addition to the set of processes selected by other means. An alternate description is that this option causes B<ps> to list all processes with a terminal (tty), or to list all processes when used together with the B<x> option."
#~ msgstr "Використати обмеження «лише себе» у стилі BSD, яке буде накладено на набір усіх процесів, якщо використано якісь параметри у стилі BSD (без «-») або якщо особу користувача B<ps> встановлено у стилі BSD. Набір процесів, який вибрано у цей спосіб, додається до набору процесів, які вибрано в інший спосіб. Альтернативним описом є те, що цей параметр наказує B<ps> вивести список усіх процесів з терміналом (tty) або вивести список усіх процесів, якщо використано разом із параметром B<x>."
#~ msgid "Really all, even session leaders. This flag is obsolete and may be discontinued in a future release. It is normally implied by the B<a> flag, and is only useful when operating in the sunos4 personality."
#~ msgstr "Справді всі, навіть лідери сеансу. Цей прапорець є застарілим, і його може бути вилучено у майбутніх випусках. Зазвичай, неявно встановлюється прапорцем B<a>, і корисний лише для роботи із особами sunos4."
#~ msgid "Lift the BSD-style \"must have a tty\" restriction, which is imposed upon the set of all processes when some BSD-style (without \"-\") options are used or when the B<ps> personality setting is BSD-like. The set of processes selected in this manner is in addition to the set of processes selected by other means. An alternate description is that this option causes B<ps> to list all processes owned by you (same EUID as B<ps>), or to list all processes when used together with the B<a> option."
#~ msgstr "Використати обмеження «повинен мати термінал» у стилі BSD, яке буде накладено на набір усіх процесів, якщо використано якісь параметри у стилі BSD (без «-») або якщо особу користувача B<ps> встановлено у стилі BSD. Набір процесів, який вибрано у цей спосіб, додається до набору процесів, які вибрано в інший спосіб. Альтернативним описом є те, що цей параметр наказує B<ps> вивести список усіх процесів, власником яких є ви (той самий EUID, що і для B<ps>) або вивести список усіх процесів, якщо використано разом із параметром B<a>."
#~ msgid "These options accept a single argument in the form of a blank-separated or comma-separated list. They can be used multiple times. For example: B<ps\\ -p\\ \"1\\ 2\"\\ -p\\ 3,4>"
#~ msgstr "Ці параметри приймають один аргумент у формі списку відокремлених пробілами або комами значень. Можна використовувати декілька разів в одній команді. Приклад: B<ps\\ -p\\ \"1\\ 2\"\\ -p\\ 3,4>"
#~ msgid "Select by command name. This selects the processes whose executable name is given in I<cmdlist>. NOTE: The command name is not the same as the command line. Previous versions of procps and the kernel truncated this command name to 15 characters. This limitation is no longer present in both. If you depended on matching only 15 characters, you may no longer get a match."
#~ msgstr "Вибрати за назвою команди. Вибирає процеси, назвою виконуваного файла у яких є назва, задана аргументом I<список_команд>. Зауваження: назва команди не є тим самим, що рядок команди. У попередніх версіях procps і ядро обрізали цю назву команди до 15 символів. Це обмеження знято у нових версіях. Якщо ваш код залежить від обмеження у 15 символів, він може не спрацювати."
#~ msgid "Select by real group ID (RGID) or name. This selects the processes whose real group name or ID is in the I<grplist> list. The real group ID identifies the group of the user who created the process, see I<getgid>(2)."
#~ msgstr "Вибрати за ідентифікатором справжньої групи (RGID) або назвою. Вибирає процеси, назва або ідентифікатор справжньої групи яких є у списку I<список_груп>. Ідентифікатор справжньої групи визначає групу користувача, який створив процес, див. I<getgid>(2)."
#~ msgid "Select by session OR by effective group name. Selection by session is specified by many standards, but selection by effective group is the logical behavior that several other operating systems use. This B<ps> will select by session when the list is completely numeric (as sessions are). Group ID numbers will work only when some group names are also specified. See the B<-s> and B<--group> options."
#~ msgstr "Вибрати за сеансом АБО за назвою ефективної групи. Вибір за сеансом визначається багатьма стандартами, але вибір за ефективною групою є логічною поведінкою, яку використано у декількох інших операційних системах. Ця версія B<ps> вибиратиме за сеансом, якщо список є повністю числовим (як сеанси). Числові ідентифікатори груп працюватимуть, лише якщо також вказано деякі назви груп. Див. параметри B<-s> і B<--group>."
#~ msgid "Select by effective group ID (EGID) or name. This selects the processes whose effective group name or ID is in I<grplist>. The effective group ID describes the group whose file access permissions are used by the process (see I<getegid>(2)). The B<-g> option is often an alternative to B<--group>."
#~ msgstr "Вибрати за ідентифікатором ефективної групи (EGID) або назвою. Вибирає процеси, чиї назви або ідентифікатори ефективних груп є у I<список_груп>. Ідентифікатор ефективної групи описує групу, чиї права доступу до файлів використано процесом (див. I<getegid>(2)). Параметр B<-g> часто є альтернативою B<--group>."
#~ msgid "Select by parent process ID. This selects the processes with a parent process\\ ID in I<pidlist>. That is, it selects processes that are children of those listed in I<pidlist>."
#~ msgstr "Вибрати за ідентифікатором батьківського процесу. Вибирає процеси із ідентифікатором батьківського процесу зі списку I<список_pid>. Таким чином, програма вибирає процеси, які є дочірніми щодо процесів зі списку I<список_pid>."
#~ msgid "Select by PID (quick mode). This selects the processes whose process ID numbers appear in I<pidlist>. With this option B<ps> reads the necessary info only for the pids listed in the I<pidlist> and doesn't apply additional filtering rules. The order of pids is unsorted and preserved. No additional selection options, sorting and forest type listings are allowed in this mode. Identical to B<q> and B<--quick-pid>."
#~ msgstr "Вибрати за PID (швидкий режим). Вибирає процеси, чиї числові ідентифікатори процесу є у списку I<список_pid>. Якщо вказано цей параметр, B<ps> прочитає потрібні дані лише для pid зі списку I<список_pid> і не застосовуватиме додаткових правил фільтрування. Порядок pid без сортування зберігатиметься. У цьому режимі не передбачено додаткових параметрів вибору, упорядковування та списки типу «ліс». Те саме, що B<q> і B<--quick-pid>."
#~ msgid "Select by tty. Nearly identical to B<-t> and B<--tty>, but can also be used with an empty I<ttylist> to indicate the terminal associated with B<ps>. Using the B<T> option is considered cleaner than using B<t> with an empty I<ttylist>."
#~ msgstr "Вибрати за терміналом. Майже те саме, що і B<-t> та B<--tty>, але можна використовувати із порожнім значенням I<список_терміналів>, щоб вказати на термінал, який пов'язано із B<ps>. Використання параметра B<T> вважається пріоритетнішим варіантом за використання B<t> із порожнім значенням I<список_терміналів>."
#~ msgid "Select by tty. This selects the processes associated with the terminals given in I<ttylist>. Terminals (ttys, or screens for text output) can be specified in several forms: /dev/ttyS1, ttyS1, S1. A plain \"-\" may be used to select processes not attached to any terminal."
#~ msgstr "Вибрати за терміналом. Вибирає процеси, пов'язані із терміналами, які задано списком I<список_терміналів>. Термінали (tty або екрани для текстового виведення) можна вказати у декількох формах: /dev/ttyS1, ttyS1, S1. Можна скористатися простим «-» для вибору процесів, які не пов'язано із будь-яким терміналом."
#~ msgid "Select by effective user ID (EUID) or name. This selects the processes whose effective user name or ID is in I<userlist>. The effective user ID describes the user whose file access permissions are used by the process (see I<geteuid>(2)). Identical to B<-u> and B<--user>."
#~ msgstr "Вибрати за ідентифікатором ефективного користувача (EUID) або назвою. Вибирає процеси, чиї імена або ідентифікатори ефективних користувачів є у I<список_користувачів>. Ідентифікатор ефективного користувача описує користувача, чиї права доступу до файлів використано процесом (див. I<geteuid>(2)). Параметр B<-u> часто є альтернативою B<--user>."
#~ msgid "Select by real user ID (RUID) or name. It selects the processes whose real user name or ID is in the I<userlist> list. The real user ID identifies the user who created the process, see I<getuid>(2)."
#~ msgstr "Вибрати за ідентифікатором справжнього користувача (RUID) або назвою. Вибирає процеси, назва або ідентифікатор справжнього користувача яких є у списку I<список_користувачів>. Ідентифікатор справжнього користувача визначає користувача, який створив процес, див. I<getuid>(2)."
#~ msgid "Select by effective user ID (EUID) or name. This selects the processes whose effective user name or ID is in I<userlist>."
#~ msgstr "Вибрати за ідентифікатором ефективного користувача (EUID) або назвою. Вибирає процеси, чия назва ефективного користувача або ідентифікатор перебуває у списку I<список_користувачів>."
#~ msgid "The effective user ID describes the user whose file access permissions are used by the process (see I<geteuid>(2)). Identical to B<U> and B<--user>."
#~ msgstr "Ідентифікатор ефективного користувача описує користувача, чиї права доступу до файлів використано процесом (див. I<geteuid>(2)). Параметр B<U> часто є альтернативою B<--user>."
#~ msgid "Do full-format listing. This option can be combined with many other UNIX-style options to add additional columns. It also causes the command arguments to be printed. When used with B<-L>, the NLWP (number of threads) and LWP (thread ID) columns will be added. See the B<c> option, the format keyword B<args>, and the format keyword B<comm>."
#~ msgstr "Виконати повноформатне виведення списку. Цей параметр можна поєднувати із багатьма іншими параметрами у стилі UNIX для додавання додаткових стовпчиків. Його використання також призводить до виведення аргументів команди. Якщо використано разом із B<-L>, буде додано стовпчики NLWP (кількості потоків обробки) та LWP (ідентифікатора потоку обробки). Див. параметр B<c>, ключове слово форматування B<args> та ключове слово форматування B<comm>."
#~ msgid "is preloaded B<o> (overloaded). The BSD B<O> option can act like B<-O> (user-defined output format with some common fields predefined) or can be used to specify sort order. Heuristics are used to determine the behavior of this option. To ensure that the desired behavior is obtained (sorting or formatting), specify the option in some other way (e.g. with B<-O> or B<--sort>). When used as a formatting option, it is identical to B<-O>, with the BSD personality."
#~ msgstr "Є попередньо завантаженим B<o> (перезавантаженим). Параметр B<O> BSD може працювати як B<-O> (визначений користувачем формат виведення з деякими попередньо визначеними типовими полями) або бути використаним для визначення упорядкування. Для визначення поведінки цього параметра буде використано евристику. Для забезпечення бажаної поведінки (упорядкування або форматування) вкажіть параметр у якийсь інший спосіб (наприклад, з B<-O> або B<--sort>). Якщо використано як параметр форматування, є ідентичним до B<-O> із особливостями BSD."
#~ msgid "Like B<-o>, but preloaded with some default columns. Identical to B<-o\\ pid,\\:>I<format>B<,\\:state,\\:tname,\\:time,\\:command> or B<-o\\ pid,\\:>I<format>B<,\\:tname,\\:time,\\:cmd>, see B<-o> below."
#~ msgstr "Подібний до B<-o>, але із попереднім завантаженням деяких типових стовпчиків. Ідентичний до B<-o\\ pid,\\:>I<формат>B<,\\:state,\\:tname,\\:time,\\:command> або B<-o\\ pid,\\:>I<формат>B<,\\:tname,\\:time,\\:cmd>, див. B<-o> нижче."
#~ msgid "User-defined format. I<format> is a single argument in the form of a blank-separated or comma-separated list, which offers a way to specify individual output columns. The recognized keywords are described in the B<STANDARD FORMAT SPECIFIERS> section below. Headers may be renamed (B<ps -o pid,\\:ruser=RealUser -o comm=Command>) as desired. If all column headers are empty (B<ps -o pid= -o comm=>) then the header line will not be output. Column width will increase as needed for wide headers; this may be used to widen up columns such as WCHAN (B<ps -o pid,\\:wchan=\\:WIDE-\\:WCHAN-\\:COLUMN -o comm>). Explicit width control (B<ps opid,\\:wchan:42,\\:cmd>) is offered too. The behavior of B<ps -o pid=X,\\:comm=Y> varies with personality; output may be one column named \"X,\\:comm=Y\" or two columns named \"X\" and \"Y\". Use multiple B<-o> options when in doubt. Use the B<PS_FORMAT> environment variable to specify a default as desired; DefSysV and DefBSD are macros that may be used to choose the default UNIX or BSD columns."
#~ msgstr "Визначений користувачем формат. Значення I<формат> є єдиним аргументом у формі списку відокремлених пробілами або комами значень, за його допомогою можна вказати окремі стовпчики виведення даних. Визначені ключові слова описано у розділі B<СТАНДАРТНІ СПЕЦИФІКАТОРИ ФОРМАТІВ> нижче. Заголовки, якщо потрібно, може бути перейменовано (B<ps -o pid,\\:ruser=RealUser -o comm=Command>). Якщо усі заголовки стовпчиків порожні (B<ps -o pid= -o comm=>), рядок заголовків не буде виведено. Для широких заголовків буде збільшено ширину стовпчика; цим можна скористатися для збільшення ширити стовпчиків, подібних до WCHAN (B<ps -o pid,\\:wchan=\\:WIDE-\\:WCHAN-\\:COLUMN -o comm>). Також можна скористатися явним визначенням ширини (B<ps opid,\\:wchan:42,\\:cmd>). Поведінка B<ps -o pid=X,\\:comm=Y> є різною у різних системах; дані може бути виведено в один стовпчик із назвою «X,\\:comm=Y» абоу два стовпчики із назвами «X» та «Y». Скористайтеся декількома параметрами B<-o>, якщо не певні щодо результатів. Скористайтеся змінною середовища B<PS_FORMAT> для визначення бажаного типового варіанта; DefSysV і DefBSD є макросами, якими можна скористатися для вибору типових стовпчиків UNIX або BSD."
#~ msgid "Show the true command name. This is derived from the name of the executable file, rather than from the argv value. Command arguments and any modifications to them are thus not shown. This option effectively turns the B<args> format keyword into the B<comm> format keyword; it is useful with the B<-f> format option and with the various BSD-style format options, which all normally display the command arguments. See the B<-f> option, the format keyword B<args>, and the format keyword B<comm>."
#~ msgstr "Показати справжню назву команди. Ця назва є похідною від назви виконуваного файла, а не від значення argv. Таким чином, аргументи команди та усі внесені до них зміни показано не буде. Цей параметр, фактично, перетворює ключове слово форматування B<args> на ключове слово форматування B<comm>. Він корисний у поєднанні із параметром форматування B<-f> та різноманітними параметрами форматування у стилі BSD, які, зазвичай, призводять до показу аргументів команди. Див. параметр B<-f>, ключове слово форматування B<args> та ключове слово форматування B<comm>."
#~ msgid "No header. (or, one header per screen in the BSD personality). The B<h> option is problematic. Standard BSD B<ps> uses this option to print a header on each page of output, but older Linux B<ps> uses this option to totally disable the header. This version of B<ps> follows the Linux usage of not printing the header unless the BSD personality has been selected, in which case it prints a header on each page of output. Regardless of the current personality, you can use the long options B<--headers> and B<--no-headers> to enable printing headers each page or disable headers entirely, respectively."
#~ msgstr "Без заголовка (боа один заголовок на екран у випадку BSD). Параметр B<h> може спричиняти проблеми. У стандартній B<ps> для BSD цей параметр використано для виведення заголовка на кожній сторінці виведених даних, але у старому B<ps> для Linux цей параметр повністю вимикає заголовок. У цій версії B<ps> реалізовано версію для Linux — не виводити заголовок, якщо не вибрано варіант для BSD, для якого буде виведено один заголовок на кожній сторінці виведених даних. Незалежно від поточного варіанта, ви можете скористатися довгими версіями параметрів, B<--headers> і B<--no-headers>, щоб увімкнути виведення заголовків на кожній сторінці або вимкнути заголовки взагалі, відповідно."
#~ msgid "Specify sorting order. Sorting syntax is [B<+>|B<->]I<key\\/.RB [,[ + | - ].IR key [,...]].> Choose a multi-letter key from the B<STANDARD FORMAT SPECIFIERS> section. The \"+\" is optional since default direction is increasing numerical or lexicographic order. Identical to B<--sort>."
#~ msgstr "Вказати варіант упорядкування. Синтаксис запису такий: [B<+>|B<->]I<ключ\\/.RB [,[ + | - ].IR ключ [,...]].> Багатолітерний ключ можна вибрати зі списку у розділі B<СТАНДАРТНІ СПЕЦИФІКАТОРИ ФОРМАТІВ>. Символ «+» є необов'язковим, оскільки типовим порядком є порядок за зростанням числових або лексикографічних значень. Те саме, що і B<--sort>."
#~ msgid "Sorting order (overloaded). The BSD B<O> option can act like B<-O> (user-defined output format with some common fields predefined) or can be used to specify sort order. Heuristics are used to determine the behavior of this option. To ensure that the desired behavior is obtained (sorting or formatting), specify the option in some other way (e.g. with B<-O> or B<--sort>)."
#~ msgstr "Варіант упорядкування (перевантажений). Параметр B<O> BSD може працювати як B<--sort> (визначений користувачем формат виведення з деякими попередньо визначеними типовими полями) або бути використаним для визначення упорядкування. Для визначення поведінки цього параметра буде використано евристику. Для забезпечення бажаної поведінки (упорядкування або форматування) вкажіть параметр у якийсь інший спосіб (наприклад, з B<-O> або B<--sort>)."
#~ msgid "For sorting, obsolete BSD B<O> option syntax is B<O>[B<+>|B<->]I<k1>[,[B<+>|B<->]I<k2>[,...]]. It orders the processes listing according to the multilevel sort specified by the sequence of one-letter short keys I<k1>,I<k2>, ...\" described in the B<OBSOLETE SORT KEYS> section below. The\\ \"+\" is currently optional, merely re-iterating the default direction on a key, but may help to distinguish an B<O> sort from an B<O> format. The \"-\" reverses direction only on the key it precedes."
#~ msgstr "Для упорядковування, застарілим синтаксисом параметра B<O> BSD є такий: B<O>[B<+>|B<->]I<k1>[,[B<+>|B<->]I<k2>[,...]]. Він упорядковує список процесів за багаторівневим правилом, яке визначає послідовність однолітерних коротких ключів I<k1>, I<k2>, ..., які описано у розділі B<ЗАСТАРІЛІ КЛЮЧІ УПОРЯКОВУВАННЯ> нижче. У поточній версії «+» є необов'язковим, оскільки просто повторює типовий напрямок упорядковування, але він може допомогти відрізнити упорядкування B<O> від формату B<O>. Символ «-» змінює напрямок упорядковування лише для ключа, перед яким його вказано."
#~ msgid "Sum up some information, such as CPU usage, from dead child processes into their parent. This is useful for examining a system where a parent process repeatedly forks off short-lived children to do work."
#~ msgstr "Підсумувати дані, зокрема використання процесора, від завершених дочірніх процесів до батьківського процесу. Корисно для аналізу системи, де батьківський процес періодично відгалужує короткотривалі дочірні процеси для виконання певних завдань."
#~ msgid "Specify sorting order. Sorting syntax is [I<+>|I<->]I<key>[,[B<+>|B<->]I<key>[,...]]. Choose a multi-letter key from the B<STANDARD FORMAT SPECIFIERS> section. The \"+\" is optional since default direction is increasing numerical or lexicographic order. Identical to B<k>. For example: B<ps jax --sort=\\:uid,\\:-ppid,\\:+pid>"
#~ msgstr "Вказати варіант упорядкування Синтаксис запису такий: [I<+>|I<->]I<ключ>[,[B<+>|B<->]I<ключ>[,...]]. Багатолітерний ключ можна вибрати зі списку у розділі B<СТАНДАРТНІ СПЕЦИФІКАТОРИ ФОРМАТІВ>. Символ «+» є необов'язковим, оскільки типовим порядком є порядок за зростанням числових або лексикографічних значень. Те саме, що і B<k>. Приклад: B<ps jax --sort=\\:uid,\\:-ppid,\\:+pid>"
#~ msgid "Print a help message. The I<section> argument can be one of I<s>imple, I<l>ist, I<o>utput, I<t>hreads, I<m>isc, or I<a>ll. The argument can be shortened to one of the underlined letters as in: s\\^|\\^l\\^|\\^o\\^|\\^t\\^|\\^m\\^|\\^a."
#~ msgstr "Вивести довідкове повідомлення. Аргументом I<розділ> може бути одна з літер I<s>imple (просте), I<l>ist (список), I<o>utput (виведення), I<t>hreads (потоки), I<m>isc (різне) або I<a>ll (усе). Аргумент можна скоротити до однієї з підкреслених літер, ось так: s\\^|\\^l\\^|\\^o\\^|\\^t\\^|\\^m\\^|\\^a."
#~ msgid "This B<ps> works by reading the virtual files in /proc. This B<ps> does not need to be setuid kmem or have any privileges to run. Do not give this B<ps> any special permissions."
#~ msgstr "Ця версія B<ps> працює на основі читання віртуальних файлів у /proc. Ця версія B<ps> не потребує налаштування setuid kmem або інших привілеїв для запуску. Не надавайте цій версії B<ps> ніяких додаткових прав доступу."
#~ msgid "CPU usage is currently expressed as the percentage of time spent running during the entire lifetime of a process. This is not ideal, and\\ it does not conform to the standards that B<ps> otherwise conforms to. CPU usage is unlikely to add up to exactly 100%."
#~ msgstr "Використання процесора у цій версії буде показано у відсотках часу, який витрачено на виконання програми під час повного часу життя процесу. Це не ідеально, і це не узгоджується із стандартами, з якими узгоджується B<ps> у інших аспектах. При цьому, загальне число використання процесора навряд чи точно дорівнюватиме 100%."
#~ msgid "The SIZE and RSS fields don't count some parts of a process including the page tables, kernel stack, struct thread_info, and struct task_struct. This is usually at least 20\\ KiB of memory that is always resident. SIZE is the virtual size of the process (code+\\:data+\\:stack)."
#~ msgstr "Поля SIZE і RSS не враховують деякі частини процесу, зокрема таблиці сторінок, стек ядра, структуру thread_info та структуру task_struct. Це, зазвичай, принаймні 20\\ КіБ пам'яті, яка завжди є резидентною. SIZE є віртуальним розміром процесу (код+\\:дані+\\:стек)."
#~ msgid "Processes marked E<lt>defunctE<gt> are dead processes (so-called \"zombies\") that remain because their parent has not destroyed them properly. These processes will be destroyed by I<init>(8) if the parent process exits."
#~ msgstr "Процеси, які позначено як E<lt>defunctE<gt>, є мертвими процесами (так званими «зомбі»), які лишаються, оскільки їхній батьківський процес не завершив їхню роботу належним чином. Ці процеси буде знижено I<init>(8), якщо завершить роботу батьківський процес."
#~ msgid "If the length of the username is greater than the length of the display column, the username will be truncated. See the B<-o> and B<-O> formatting options to customize length."
#~ msgstr "Якщо довжина імені користувача перевищує довжину стовпчика на дисплеї, ім'я користувача буде обрізано. Для налаштовування довжини скористайтеся параметрами форматування B<-o> і B<-O>."
#~ msgid "Commands options such as B<ps -aux> are not recommended as it is a confusion of two different standards. According to the POSIX and UNIX standards, the above command asks to display all processes with a TTY (generally the commands users are running) plus all processes owned by a user named I<x>. If that user doesn't exist, then B<ps> will assume you really meant B<ps aux>."
#~ msgstr "Не рекомендуємо користуватися параметрами команд, зокрема B<ps -aux>, оскільки це призводить до неузгодженості у двох різних стандартах. Відповідно до стандартів POSIX і UNIX, наведена команда просить програму показати усі процеси з терміналом (загалом, команд, які запущено користувачами) іусі процеси, власником яких є користувач із іменем I<x>. Якщо цього користувача не існує, B<ps> припускатиме, що ви наказали виконати B<ps aux>."
#~ msgid "Here are the different values that the B<s>, B<stat> and B<state> output specifiers (header \"STAT\" or \"S\") will display to describe the state of a process:"
#~ msgstr "Тут наведено різні значення, які показують специфікатори виведення B<s>, B<stat> і B<state> (заголовок «STAT» або «S»), для опису стану процесу:"
#~ msgid "These keys are used by the BSD B<O> option (when it is used for sorting). The GNU B<--sort> option doesn't use these keys, but the specifiers described below in the B<STANDARD FORMAT SPECIFIERS> section. Note that the values used in sorting are the internal values B<ps> uses and not the \"cooked\" values used in some of the output format fields (e.g. sorting on tty will sort into device number, not according to the terminal name displayed). Pipe B<ps> output into the B<sort>(1) command if you want to sort the cooked values."
#~ msgstr "Ці ключі використовують разом із параметром B<O> BSD (якщо його використовують для упорядковування). Параметр B<--sort> GNU не використовує ці ключі, але описані нижче специфікатори з розділу B<СТАНДАРТНІ СПЕЦИФІКАТОРИ ФОРМАТІВ>. Зауважте, що значення, які використано в упорядковуванні, є внутрішніми значеннями, які використовує B<ps>, а не «оброблені» значення, які використовують у деяких полях форматування виведення (наприклад, у полі термінала упорядковування виконується за номером пристрою, а не за показаною назвою термінала). Передайте каналом виведені B<ps> дані до програми B<sort>(1), якщо вам хочеться упорядкувати дані за обробленими значеннями."
#~ msgid "This B<ps> supports AIX format descriptors, which work somewhat like the formatting codes of I<printf>(1) and I<printf>(3). For example, the normal default output can be produced with this: B<ps -eo \"%p %y %x %c\">. The B<NORMAL> codes are described in the next section."
#~ msgstr "У цій версії B<ps> передбачено підтримку дескрипторів форматів AIX, які працюють дещо подібно до кодів форматування I<printf>(1) і I<printf>(3). Наприклад, звичайне типове виведення можна отримати ось так: B<ps -eo \"%p %y %x %c\">. Коди B<NORMAL> описано у наступному розділі."
#~ msgid "Here are the different keywords that may be used to control the output format (e.g., with option B<-o>) or to sort the selected processes with the GNU-style B<--sort> option."
#~ msgstr "Нижче наведено різні ключові слова, якими можна скористатися для керування форматом виведення (наприклад, з параметром B<-o>) або упорядковування вибраних процесів за допомогою параметра B<--sort> у стилі GNU."
#~ msgid "The following user-defined format specifiers may contain spaces: B<args>, B<cmd>, B<comm>, B<command>, B<fname>, B<ucmd>, B<ucomm>, B<lstart>, B<bsdstart>, B<start>."
#~ msgstr "Пробіли можуть міститися у таких визначених користувачем специфікаторах форматів: B<args>, B<cmd>, B<comm>, B<command>, B<fname>, B<ucmd>, B<ucomm>, B<lstart>, B<bsdstart>, B<start>."
#~ "cpu utilization of the process in \"##.#\" format. Currently, it is the CPU\n"
#~ "time used divided by the time the process has been running (cputime/realtime\n"
#~ "ratio), expressed as a percentage. It will not add up to 100% unless you are\n"
#~ "lucky. (alias\n"
#~ "B<pcpu>)."
#~ msgstr "використання процесом процесора у форматі «##.#». У поточній версії це частка від ділення витраченого на виконання процесу часу на час, протягом якого процес працює (відношення «час процесора/справжній час»), виражене у відсотках. Дуже часто загальна сума таких значень є меншою за 100% (альтернатива — B<pcpu>)."
#~ "When specified last, this column will extend to the edge of the display. If\n"
#~ "B<ps>\n"
#~ "can not determine display width, as when output is redirected (piped) into a\n"
#~ "file or another command, the output width is undefined (it may be 80,\n"
#~ "unlimited, determined by the\n"
#~ "B<TERM>\n"
#~ "variable, and so on). The\n"
#~ "B<COLUMNS>\n"
#~ "environment variable or\n"
#~ "B<--cols>\n"
#~ "option may be used to exactly determine the width in this case. The\n"
#~ "B<w>\n"
#~ "or\n"
#~ "B<-w>\n"
#~ "option may be also be used to adjust width."
#~ msgstr "Якщо вказано останнім, цей стовпчик буде розтягнуто до краю дисплея. Якщо B<ps> не вдасться визначити ширину дисплея, наприклад, коли виведені дані буде переспрямовано (каналом) до файла або іншої програми, ширина виведення залишиться невизначеною (вона може дорівнювати 80, бути необмеженою, визначатися змінною B<TERM> тощо). У цьому випадку для точного визначення ширини показу можна скористатися змінною середовища B<COLUMNS> або параметром B<--cols>. Для коригування ширини також можна скористатися параметром B<w> або B<-w>."
#~ "According to the width of the field, a 32 or 64-bit mask in hexadecimal\n"
#~ "format is displayed. (alias\n"
#~ "B<sig_block>, B<sigmask>)."
#~ msgstr "маска блокованих сигналів, див. I<signal>(7). Відповідно до ширини поля, буде показано 32- або 64-бітову маску у шістнадцятковому форматі (альтернатива – B<sig_block>, B<sigmask>)."
#~ "time the command started. If the process was started less than 24 hours ago,\n"
#~ "the output format is \"\\ HH:MM\", else it is \" Mmm:SS\" (where Mmm is the three\n"
#~ "letters of the month). See also\n"
#~ "B<lstart>, B<start>, B<start_time>, and B<stime>."
#~ msgstr "час запуску команди Якщо процес було запущено менше ніж 24 години тому, буде виведено дані у форматі «ГГ:ХХ», інакше, дані буде виведено у форматі « Ммм дд» (де «Ммм» — трилітерне скорочення назви місяця). Див. також B<lstart>, B<start>, B<start_time> і B<stime>."
#~ "accumulated cpu time, user + system. The display format is usually\n"
#~ "\"MMM:SS\", but can be shifted to the right if the process used more than 999\n"
#~ "minutes of cpu time."
#~ msgstr "накопичувальний час процесора, користувач + система. Форматом показу, зазвичай, є «ХХХ:СС», але його можна посунути праворуч, якщо процес використав понад 999 хвилин часу процесора."
#~ "According to the width of the field, a 32 or 64 bits mask in hexadecimal\n"
#~ "format is displayed. (alias\n"
#~ "B<sig_catch>, B<sigcatch>)."
#~ msgstr "маска перехоплених, див. I<signal>(7). Відповідно до ширини поля, буде показано 32- або 64-бітову маску у шістнадцятковому форматі (альтернатива – B<sig_catch>, B<sigcatch>)."
#~ "command name (only the executable name). Modifications to the command name\n"
#~ "will not be shown. A process marked E<lt>defunctE<gt> is partly dead, waiting to be\n"
#~ "fully destroyed by its parent. The output in this column may contain spaces.\n"
#~ "(alias\n"
#~ "B<ucmd>, B<ucomm>).\n"
#~ "See also the\n"
#~ "B<args>\n"
#~ "format keyword, the\n"
#~ "B<-f>\n"
#~ "option, and the\n"
#~ "B<c>\n"
#~ "option.\n"
#~ msgstr ""
#~ "назва команди (лише назва виконуваного файла). Зміни у назві команди показано не буде. Процес, який позначено записом E<lt>defunctE<gt> є частково мертвим,\n"
#~ "таким, що очікує на повне знищення батьківським процесом. Виведені до цього стовпчика дані можуть містити пробіли. (альтернативи – B<ucmd>, B<ucomm>). Див. також ключове слово форматування B<args>, параметр B<-f> та параметр B<c>.\n"
#~ "When specified last, this column will extend to the edge of the display. If\n"
#~ "B<ps>\n"
#~ "can not determine display width, as when output is redirected (piped) into a\n"
#~ "file or another command, the output width is undefined (it may be 80,\n"
#~ "unlimited, determined by the\n"
#~ "B<TERM>\n"
#~ "variable, and so on). The\n"
#~ "B<COLUMNS>\n"
#~ "environment variable or\n"
#~ "B<--cols>\n"
#~ "option may be used to exactly determine the width in this case. The\n"
#~ "B<w>\\ orB<\\ -w>\n"
#~ "option may be also be used to adjust width."
#~ msgstr "Якщо вказано останнім, цей стовпчик буде розтягнуто до краю дисплея. Якщо B<ps> не вдасться визначити ширину дисплея, наприклад, коли виведені дані буде переспрямовано (каналом) до файла або іншої програми, ширина виведення залишиться невизначеною (вона може дорівнювати 80, бути необмеженою, визначатися змінною B<TERM> тощо). У цьому випадку для точного визначення ширини показу можна скористатися змінною середовища B<COLUMNS> або параметром B<--cols>. Для коригування ширини також можна скористатися параметром B<w> або B<-w>."
#~ "effective group ID of the process. This will be the textual group ID, if it\n"
#~ "can be obtained and the field width permits, or a decimal representation\n"
#~ "otherwise. (alias\n"
#~ "B<group>)."
#~ msgstr "ідентифікатор ефективної групи процесу. Це буде текстовий ідентифікатор групи, якщо його можна отримати, і поле є достатньо широким, або числове представлення, якщо це не так. (альтернатива – B<group>)."
#~ "effective user name. This will be the textual user ID, if it can be obtained\n"
#~ "and the field width permits, or a decimal representation otherwise. The\n"
#~ "B<n>\n"
#~ "option can be used to force the decimal representation. (alias\n"
#~ "B<uname>, B<user>)."
#~ msgstr "ефективне ім'я користувача. Це буде текстовий ідентифікатор користувача, якщо його можна отримати і поле є достатньо широким, або числове представлення, якщо це не так. Для примусового визначення десяткового представлення можна скористатися параметром B<n>. (альтернатива – B<uname>, B<user>)."
#~ "filesystem access group ID. This will be the textual group ID, if it can\n"
#~ "be obtained and the field width permits, or a decimal representation\n"
#~ "otherwise. (alias\n"
#~ "B<fsgroup>)."
#~ msgstr "ідентифікатор групи для доступу до файлової системи. Це буде текстовий ідентифікатор групи, якщо його можна отримати, і поле є достатньо широким, або числове представлення, якщо це не так. (альтернатива – B<fsgroup>)."
#~ "filesystem access user ID. This will be the textual user ID, if it can be\n"
#~ "obtained and the field width permits, or a decimal representation otherwise."
#~ msgstr "ідентифікатор користувача для доступу до файлової системи. Це буде текстовий ідентифікатор користувача, якщо його можна отримати і поле є достатньо широким, або числове представлення, якщо це не так."
#~ "According to the width of the field, a 32 or 64 bits mask in hexadecimal\n"
#~ "format is displayed. (alias\n"
#~ "B<sig_ignore>, B<sigignore>)."
#~ msgstr "маска ігнорованих сигналів, див. I<signal>(7). Відповідно до ширини поля, буде показано 32- або 64-бітову маску у шістнадцятковому форматі (альтернатива – B<sig_ignore>, B<sigignore>)."
#~ "security label, most commonly used for SELinux context data. This is for\n"
#~ "the\n"
#~ "I<Mandatory Access Control>\n"
#~ "(\"MAC\") found on high-security systems."
#~ msgstr "мітка захисту, здебільшого використовують для даних контексту SELinux. Призначено для I<Mandatory Access Control> («MAC») у високозахищених системах."
#~ "This ranges from 19 (nicest) to -20 (not nice to others),\n"
#~ "see\n"
#~ "I<nice>(1).\n"
#~ "(alias\n"
#~ "B<nice>)."
#~ msgstr "значення nice. Діапазон значення — від 19 (найнижча пріоритетність) до -20 (найвища пріоритетність щодо інших), див. I<nice>(1) (альтернатива – B<nice>)."
#~ "address of the kernel function where the process is sleeping (use\n"
#~ "B<wchan>\n"
#~ "if you want the kernel function name). Running tasks will display a dash\n"
#~ "('-') in this column."
#~ msgstr "адреса функції ядра, де спить процес (скористайтеся, B<wchan>, якщо вам потрібна назва функції). Для запущених завдань у цьому стовпчику буде показано дефіс («-»)."
#~ "Signals pending on the process are distinct from signals pending on\n"
#~ "individual threads. Use the\n"
#~ "B<m>\n"
#~ "option or the\n"
#~ "B<-m>\n"
#~ "option to see both. According to the width of the field, a 32 or 64 bits\n"
#~ "mask in hexadecimal format is displayed. (alias\n"
#~ "B<sig>)."
#~ msgstr "маска сигналів черги. Див. I<signal>(7). Черга сигналів процесу відрізняється від черги сигналів потоків обробки. Скористайтеся параметрами B<m> і B<-m> для перегляду обох. Відповідно до ширини поля, буде показано 32- або 64-бітову маску у шістнадцятковому форматі (альтернатива – B<sig>)."
#~ "real user ID. This will be the textual user ID, if it can be obtained and\n"
#~ "the field width permits, or a decimal representation otherwise."
#~ msgstr "справжній ідентифікатор користувача. Це буде текстовий ідентифікатор користувача, якщо його можна отримати і поле є достатньо широким, або числове представлення, якщо це не так."
#~ "minimal state display (one character). See section\n"
#~ "B<PROCESS STATE CODES>\n"
#~ "for the different values. See also\n"
#~ "B<stat>\n"
#~ "if you want additional information displayed. (alias\n"
#~ "B<state>)."
#~ msgstr "мінімальний показ стану (один символ). Див. розділ B<КОДИ СТАНІВ ПРОЦЕСУ> для різних значень. Див. також B<stat>, якщо вам потрібен показ додаткових відомостей (альтернатива – B<state>)."
#~ "scheduling policy of the process. The policies SCHED_OTHER (SCHED_NORMAL),\n"
#~ "SCHED_FIFO, SCHED_RR, SCHED_BATCH, SCHED_ISO, SCHED_IDLE and SCHED_DEADLINE are\n"
#~ "respectively displayed as 0, 1, 2, 3, 4, 5 and 6."
#~ msgstr "правила планування для процесу. Для правил SCHED_OTHER (SCHED_NORMAL), SCHED_FIFO, SCHED_RR, SCHED_BATCH, SCHED_ISO, SCHED_IDLE і SCHED_DEADLINE, відповідно, буде показано як 0, 1, 2, 3, 4, 5 і 6."
#~ "displays the identifier associated with all hardware devices assigned\n"
#~ "to a specific workplace,\n"
#~ "if systemd support has been included."
#~ msgstr "показує ідентифікатор, який пов'язано із усіма призначеними до певного робочого місця апаратними пристроями, якщо було включено підтримку systemd."
#~ "approximate amount of swap space that would be required if the process were\n"
#~ "to dirty all writable pages and then be swapped out. This number is very\n"
#~ "rough!"
#~ msgstr "приблизний обсяг простору резервної пам'яті, який знадобиться, якщо процес зіпсує усі записувані сторінки з наступним витісненням до резервної пам'яті. Це числове значення обчислено досить грубо!"
#~ "starting time or date of the process. Only the year will be displayed if the\n"
#~ "process was not started the same year\n"
#~ "B<ps>\n"
#~ "was invoked, or \"MmmDD\" if it was not started the same day, or \"HH:MM\"\n"
#~ "otherwise. See also\n"
#~ "B<bsdstart>, B<start>, B<lstart>, and B<stime>."
#~ msgstr "час або дата запуску процесу. Якщо процес не було запущено року, коли було викликано B<ps>, буде показано лише рік або «МммДД», якщо процес не було запущено у той самий день, або «ГГ:ХХ» у інших випадках. Див. також B<bsdstart>, B<start>, B<lstart> і B<stime>."
#~ "if you just want the first character displayed."
#~ msgstr "багатосимвольний стан процесу. Див. розділ B<КОДИ СТАНІВ ПРОЦЕСУ>, щоб дізнатися про призначення різних значень. Див. також B<s> і B<state>, якщо ви просто хочете бачити перший символ."
#~ "saved user name. This will be the textual user ID, if it can be obtained and\n"
#~ "the field width permits, or a decimal representation otherwise. (alias\n"
#~ "B<svuser>)."
#~ msgstr "збережене ім'я користувача. Це буде текстовий ідентифікатор користувача, якщо його можна отримати і поле є достатньо широким, або числове представлення, якщо це не так (альтернатива – B<svuser>)."
#~ "size in physical pages of the core image of the process. This includes text,\n"
#~ "data, and stack space. Device mappings are currently excluded; this is\n"
#~ "subject to change. See\n"
#~ "B<vsz>\\ andB<\\ rss>."
#~ msgstr "розмір у фізичних сторінках образу ядра процесу. Це включає текст, дані та стек. У поточній версії прив'язки до пристроїв виключено; це може змінитися. Див. B<vsz> і B<rss>."
#~ "a number representing the thread group to which a task belongs (alias\n"
#~ "B<pid>).\n"
#~ "It is the process ID of the thread group leader."
#~ msgstr "число, яке відповідає групі потоків обробки, яким належить завдання (альтернатива – B<pid>). Це ідентифікатор процесу лідера групи потоків обробки."
#~ "the unique number representing a dispatchable entity (alias\n"
#~ "B<lwp>, B<spid>).\n"
#~ "This value may also appear as: a process ID (pid); a process group ID (pgrp);\n"
#~ "a session ID for the session leader (sid); a thread group ID for the thread\n"
#~ "group leader (tgid); and a tty process group ID for the process group leader\n"
#~ "(tpgid)."
#~ msgstr "унікальне число, що відповідає розподілюваному запису (альтернатива – B<lwp>, B<spid>). Це значення може також бути показано як ідентифікатор процесу (pid); ідентифікатор групи процесів (pgrp); ідентифікатор сеансу для лідера сеансу (sid); ідентифікатор групи потоків для лідера групи потоків (tgid) та ідентифікатор групи процесів термінала для лідера групи процесів (tpgid)."
#~ "virtual memory size of the process in KiB (1024-byte units). Device\n"
#~ "mappings are currently excluded; this is subject to change. (alias\n"
#~ "B<vsize>)."
#~ msgstr "розмір віртуальної пам'яті процесу у КіБ (1024-байтових одиницях). У поточній версії прив'язки до пристроїв буде виключено; це може бути змінено у майбутніх версіях (альтернатива – B<vsize>)."
#~ msgid "Default output format override. You may set this to a format string of the type used for the B<-o> option. The B<DefSysV> and B<DefBSD> values are particularly useful."
#~ msgstr "Перевизначення типового формату виведення. Ви можете встановити для цієї змінної рядок форматування типу, який використовують для параметра B<-o>. Зокрема, корисними будуть значення B<DefSysV> і B<DefBSD>."
#~ msgid "In general, it is a bad idea to set these variables. The one exception is B<CMD_ENV> or B<PS_PERSONALITY>, which could be set to Linux for normal systems. Without that setting, B<ps> follows the useless and bad parts of the Unix98 standard."
#~ msgstr "Загалом, не варто встановлювати значення для цих змінних. Єдиним виключенням є B<CMD_ENV> або B<PS_PERSONALITY>, для яких можна встановити значення Linux для звичайних систем. Без встановлення цього значення B<ps> виконуватиме непотрібні і неякісні частини стандарту Unix98."
#~ msgid "B<ps> was originally written by E<.MT lankeste@\\:fwi.\\:uva.\\:nl> Branko Lankester E<.ME .> E<.MT johnsonm@\\:redhat.\\:com> Michael K.\\& Johnson E<.ME> re-wrote it significantly to use the proc filesystem, changing a few things in the process. E<.MT mjshield@\\:nyx.\\:cs.\\:du.\\:edu> Michael Shields E<.ME> added the pid-list feature. E<.MT cblake@\\:bbn.\\:com> Charles Blake E<.ME> added multi-level sorting, the dirent-style library, the device name-to-number mmaped database, the approximate binary search directly on System.map, and many code and documentation cleanups. David Mossberger-Tang wrote the generic BFD support for psupdate. E<.MT albert@\\:users.\\:sf.\\:net> Albert Cahalan E<.ME> rewrote ps for full Unix98 and BSD support, along with some ugly hacks for obsolete and foreign syntax."
#~ msgstr "Першу версію B<ps> було написано E<.MT lankeste@\\:fwi.\\:uva.\\:nl> Branko Lankester E<.ME .> E<.MT johnsonm@\\:redhat.\\:com> Michael K.\\& Johnson E<.ME> значно переписав програму для використання файлової системи proc, змінивши декілька речей у процесі. E<.MT mjshield@\\:nyx.\\:cs.\\:du.\\:edu> Michael Shields E<.ME> додав можливість списку pid. E<.MT cblake@\\:bbn.\\:com> Charles Blake E<.ME> додав багаторівневе упорядковування, бібліотеку у стилі dirent, базу даних із прив'язкою назв пристроїв до чисел, приблизний двійковий пошук безпосередньо у System.map, а також виконав багато упорядкування коду та документації. David Mossberger-Tang написав загальну підтримку BFD для psupdate. E<.MT albert@\\:users.\\:sf.\\:net> Albert Cahalan E<.ME> переписав ps з метою повної підтримки стандартів Unix98 та BSD, додавши деякий обхідний код для застарілого і стороннього синтаксису."
#~ msgid "The \\*(WE program provides a dynamic real-time view of a running system. It can displayB< system> summary information as well as a list of \\*(TT currently being managed by the Linux kernel. The types of system summary information shown and the types, order and size of information displayed for processes are all user configurable and that configuration can be made persistent across restarts."
#~ msgstr "Програма \\*(WE забезпечує динамічний перегляд у режимі реального часу запущеної системи. Вона може показувати загальні відомості щодо B<системи>, а також список \\*(TT, якими зараз керує ядро Linux. Користувач може налаштовувати будь-які типи показаних загальних відомостей щодо системи, порядок і тип відомостей, які показано для процесів. Налаштування можна зберегти і відновлювати після перезапуску програми."
#~ msgid "The program provides a limited interactive interface for process manipulation as well as a much more extensive interface for personal configuration \\*(Em encompassing every aspect of its operation. And while \\*(WE is referred to throughout this document, you are free to name the program anything you wish. That new name, possibly an alias, will then be reflected on \\*(We's display and used when reading and writing a \\*(CF."
#~ msgstr "У програмі передбачено обмежений інтерактивний інтерфейс для керування процесами, а також набагато ширший інтерфейс для особистого налаштовування \\*(Em він включає усі аспекти роботи програми. Хоча усе це буде описано як \\*(WE у решті цього документа, ви можете назвати програму будь-як. Програму із новою назвою, можливо просто альтернативою назви, буде відтворено у показі \\*(We і використано для читання та запису \\*(CF."
#~ " а. СЕРЕДНІ ЗНАЧЕННЯ ЧАСУ РОБОТИ ТА НАВАНТАЖЕННЯ\n"
#~ " б. СТАНИ ЗАВДАННЯ ТА ПРОЦЕСОРА\n"
#~ " в. ВИКОРИСТАННЯ ПАМ'ЯТІ\n"
#~ " 3. ПОКАЗ ПОЛІВ / СТОВПЧИКІВ\n"
#~ " а. ОПИС ПОЛІВ\n"
#~ " б. КЕРУВАННЯ ПОЛЯМИ\n"
#~ " 4. ІНТЕРАКТИВНІ КОМАНДИ\n"
#~ " а. ЗАГАЛЬНІ КОМАНДИ\n"
#~ " б. КОМАНДИ ОБЛАСТІ РЕЗЮМЕ\n"
#~ " в. КОМАНДИ ОБЛАСТІ ЗАВДАНЬ\n"
#~ " 1. Вигляд\n"
#~ " 2. Вміст\n"
#~ " 3. Розмір\n"
#~ " 4. Упорядкування\n"
#~ " г. ПРИВ'ЯЗКА КОЛЬОРІВ\n"
#~ " 5. ПОЛОЖЕННЯ АЛЬТЕРНАТИВНОГО ПОКАЗУ\n"
#~ " а. ОГЛЯД ВІКОН\n"
#~ " б. КОМАНДИ ДЛЯ ВІКОН\n"
#~ " в. ГОРТАННЯ ВІКНА\n"
#~ " г. ПОШУК УВІКНІ\n"
#~ " д. ФІЛЬТРУВАННЯ УВІКНІ\n"
#~ " 6. ФАЙЛИ\n"
#~ " а. ФАЙЛ ОСОБИСТИХ НАЛАШТУВАНЬ\n"
#~ " б. ДОДАВАННЯ ЗАПИСІВ ДЛЯ ІНСПЕКТУВАННЯ\n"
#~ " в. ФАЙЛ ЗАГАЛЬНОСИСТЕМНИХ НАЛАШТУВАНЬ\n"
#~ " г. ФАЙЛ ЗАГАЛЬНОСИСТЕМНИХ ОБМЕЖЕНЬ\n"
#~ " 7. ЗРАЗКИ ДУРНУВАТИХ ТРЮКІВ\n"
#~ " а. Магія ядра\n"
#~ " b. Вікна-стрибунці\n"
#~ " c. Вікно Великого Птаха\n"
#~ " d. Перемикачка\n"
#~ " 8. ВАДИ, 9. ДИВ. ТАКОЖ\n"
#~ msgid "Operation"
#~ msgstr "Робота програми"
#~ msgid "When operating \\*(We, the two most important keys are the help (h or ?) key and quit (`q') key. Alternatively, you could simply use the traditional interrupt key (^C) when you're done."
#~ msgstr "При роботі з \\*(We найважливішими клавішами є клавіша довідки (h або ?) і клавіша виходу («q»). Крім того, для завершення роботи програми ви можете скористатися традиційною комбінацією для переривання роботи програм (^C)."
#~ msgid "When started for the first time, you'll be presented with these traditional elements on the main \\*(We screen: 1) Summary Area; 2) Fields/Columns Header; 3) Task Area. Each of these will be explored in the sections that follow. There is also an Input/Message line between the Summary Area and Columns Header which needs no further explanation."
#~ msgstr "Під час запуску уперше програма покаже вам такі традиційні елементи на головному екрані \\*(We: 1) область резюме; 2) заголовок полів/стовпчиків; 3) область завдань. Опис кожного з цих елементів наведено у наступних розділах. Також ви побачите рядок введення/повідомлень між областю резюме та заголовком стовпчиків. Цей рядок не потребує зайвих пояснень."
#~ msgid "The main \\*(We screen is I<generally> quite adaptive to changes in terminal dimensions under X-Windows. Other \\*(We screens may be less so, especially those with static text. It ultimately depends, however, on your particular window manager and terminal emulator. There may be occasions when their view of terminal size and current contents differs from \\*(We's view, which is always based on operating system calls."
#~ msgstr "Головна сторінка \\*(We I<загалом> є доволі адаптивною до змін у розмірностях термінала в X-Window. Інші сторінки \\*(We можуть бути менше пристосовані до змін, особливо сторінки зі статичним текстом. Це, втім, повністю залежить від вашої системи керування вікнами та емулятора термінала. Може так трапитися, що обчислення розміру термінала та поточного вмісту у цих програмах відрізняється від обчислення у \\*(We, яке завжди виконується на основі викликів операційної системи."
#~ msgid "Following any re-size operation, if a \\*(We screen is corrupted, appears incomplete or disordered, simply typing something innocuous like a punctuation character or cursor motion key will usually restore it. In extreme cases, the following sequence almost certainly will:"
#~ msgstr "Після будь-якої дії зі зміни розмірів, якщо вміст сторінки \\*(We пошкоджено, дані показано не повністю або не впорядковано, просте введення чогось нешкідливого, наприклад символу пунктуації або клавіші пересування курсора, зазвичай, відновлює нормальний показ даних. В екстремальних випадках, майже напевно, спрацює така послідовність:"
#~ msgid "But if the display is still corrupted, there is one more step you could try. Insert this command after \\*(We has been suspended but before resuming it."
#~ msgstr "Але якщо показані дані лишаються пошкодженими і після цього, ви можете спробувати ще один крок. Вставте цю команду після того, як роботу \\*(We було призупинено, але перед її відновленням."
#~ msgid "\\*(NT the width of \\*(We's display will be limited to \\*(WX positions. Displaying all fields requires \\*(WF characters. Remaining screen width is usually allocated to any variable width columns currently visible. The variable width columns, such as COMMAND, are noted in topic 3a. DESCRIPTIONS of Fields. Actual output width may also be influenced by the -w switch, which is discussed in topic 1. COMMAND-LINE Options."
#~ msgstr "\\*(NT ширину перегляду у \\*(We обмежено \\*(WX позиціями. Показ усіх полів потребує \\*(WF символів. Решту ширини екрана буде, зазвичай, використано для будь-яких показаних стовпчиків змінної ширини. Стовпчики змінної ширини, зокрема COMMAND, описано у розділі 3а. ОПИСИ ПОЛІВ. На ширину виведених даних також може вплинути параметр -w, обговоренню якого присвячено розділ 1. ПАРАМЕТРИ КОМАНДНОГО РЯДКА."
#~ msgid "Lastly, some of \\*(We's screens or functions require the use of cursor motion keys like the standard \\*(KAs plus the Home, End, PgUp and PgDn keys. If your terminal or emulator does not provide those keys, the following combinations are accepted as alternatives:"
#~ msgstr "Нарешті, деякі з екранів або функцій \\*(We потребують використання клавіш пересування курсора, зокрема стандартних клавіш зі стрілками та клавіш Home, End, PgUp і PgDn. Якщо у вашому терміналі або емуляторі термінала не передбачено доступу до цих клавіш, можна скористатися такими альтернативами:"
#~ msgid "The B<Up> and B<Down> \\*(KAs have special significance when prompted for line input terminated with the E<lt>EnterE<gt> key. Those keys, or their aliases, can be used to retrieve previous input lines which can then be edited and re-input. And there are four additional keys available with line oriented input."
#~ msgstr "Клавіші зі стрілками B<Вгору> та B<Вниз> є особливо важливими у рядку запиту щодо вхідних даних, введення яких завершується натисканням клавіші E<lt>EnterE<gt>. Цими клавішами або їхніми альтернативами можна скористатися для отримання попередніх рядків введення, які потім можна відредагувати та ввести знову. Крім того, передбачено чотири додаткових клавіші із орієнтованим на рядки введенням."
#~ msgid "For our purposes there are three types of memory, and one is optional. First is \\*(MP, a limited resource where code and data must reside when executed or referenced. Next is the optional \\*(MS, where modified (dirty) memory can be saved and later retrieved if too many demands are made on \\*(MP. Lastly we have \\*(MV, a nearly unlimited resource serving the following goals:"
#~ msgstr "У програмі використано три типи пам'яті, один є необов'язковим. Першим типом є фізична пам'ять, обмежений ресурс, у якому зберігаються код і дані при виконанні або використанні. Далі, є необов'язковий файл резервної пам'яті, де зберігаються змінені дані, які згодом можна отримати, якщо перевищено обсяг для фізичної пам'яті. Нарешті, є віртуальна пам'ять, майже необмежений ресурс якої використовується за такими призначеннями:"
#~ msgid "Regardless of which of these forms memory may take, all are managed as pages (typically 4096 bytes) but expressed by default in \\*(We as KiB (kibibyte). The memory discussed under topic `2c. MEMORY Usage' deals with \\*(MP and the \\*(MS for the system as a whole. The memory reviewed in topic `3. FIELDS / Columns Display' embraces all three memory types, but for individual processes."
#~ msgstr "Незалежно від того, яку з цих форм може приймати пам'ять, усіма ними система керує як сторінками (типовим розміром сторінки є 4096 байтів), але типово виражається у \\*(We у КіБ (кібібайтах). Обговорення пам'яті у розділі «2в. ВИКОРИСТАННЯ ПАМ'ЯТІ» стосується фізичної пам'яті та резервної пам'яті на диску для системи у цілому. Огляд пам'яті наведено у розділі «3. ПОЛЯ / ПОКАЗ СТОВПЧИКІВ», він стосується усіх трьох типів пам'яті, але для окремих процесів."
#~ msgid "For each such process, every memory page is restricted to a single quadrant from the table below. Both \\*(MP and \\*(MV can include any of the four, while the \\*(MS only includes #1 through #3. The memory in quadrant #4, when modified, acts as its own dedicated \\*(MS."
#~ msgstr "Для кожного з таких процесів кожну сторінку пам'яті обмежено одним квадрантом із наведеної нижче таблиці. Включати будь-яку з чотирьох можуть і фізична пам'ять, і віртуальна пам'ять, а резервна пам'ять на диску може включати лише сторінки з квадрантів від 1 до 3. Пам'ять у квадранті 4, при зміні, працює як власна резервна пам'ять на диску."
#~ msgid "The following may help in interpreting process level memory values displayed as scalable columns and discussed under topic `3a. DESCRIPTIONS of Fields'."
#~ msgstr "Наведені нижче відомості можуть допомогти у інтерпретації значень рівнів пам'яті, які показано у форматі масштабованих стовпчиків і описано у розділі «3а. ОПИС ПОЛІВ»."
#~ msgid "\\*(NT Even though program images and shared libraries are considered I<private> to a process, they will be accounted for as I<shared> (SHR) by the kernel."
#~ msgstr "\\*(NT Хоча образи програми і спільні бібліотеки вважаються I<приватними> для процесу, їх буде враховано як I<спільні> (SHR) ядром системи."
#~ msgid "Starts \\*(We in Batch mode, which could be useful for sending output from \\*(We to other programs or to a file. In this mode, \\*(We will not accept input and runs until the iterations limit you've set with the `-n' \\*(CO or until killed."
#~ msgstr "Запускає \\*(We у пакетному режимі, що може бути корисним для надсилання виведених даних з \\*(We до інших програм або до файла. У цьому режимі \\*(We не прийматиме вхідних даних і працюватиме, аж доки не буде досягнуто кількості ітерацій, яку встановлено за допомогою параметра командного рядка «-n», або до примусового завершення роботи програми."
#~ msgid "Starts \\*(We with the last remembered `c' state reversed. Thus, if \\*(We was displaying command lines, now that field will show program names, and vice versa. \\*(XC `c' \\*(CI for additional information."
#~ msgstr "Запускає \\*(We зі оберненням до останнього збереженого стану «c». Отже, якщо \\*(We показувала рядки команд, після запуску програма показуватиме назви програм, і навпаки. \\*(XC інтерактивну команду «c», щоб дізнатися більше."
#~ msgid "Specifies the delay between screen updates, and overrides the corresponding value in one's personal \\*(CF or the startup default. Later this can be changed with the `d' or `s' \\*(CIs."
#~ msgstr "Визначає затримку між оновленнями екрана і перевизначає відповідне значення у особистому файлі налаштувань або типові налаштування під час запуску. Пізніше, це значення можна змінити за допомогою інтерактивних команд «d» та «s»."
#~ msgid "Fractional seconds are honored, but a negative number is not allowed. In all cases, however, such changes are prohibited if \\*(We is running in Secure mode, except for root (unless the `s' \\*(CO was used). For additional information on Secure mode \\*(Xt 6d. SYSTEM Restrictions File."
#~ msgstr "До уваги братимуться дробові частини секунди, але не можна використовувати від'ємні числа. Втім, за будь-яких умов, такі зміни заборонено виконувати, якщо \\*(We працює у захищеному режимі, усім, окрім користувача root (якщо не було використано параметра командного рядка «s»). Додаткові відомості щодо захищеного режиму наведено у розділі 6г. ФАЙЛ ЗАГАЛЬНОСИСТЕМНИХ ОБМЕЖЕНЬ."
#~ msgid "Instructs \\*(We to display individual threads. Without this \\*(CO a summation of all threads in each process is shown. Later this can be changed with the `H' \\*(CI."
#~ msgstr "Наказує \\*(We показувати окремі потоки обробки. Без цього параметра командного рядка буде показано сумарні дані щодо усіх потоків кожного процесу. Пізніше режим роботи можна змінити за допомогою інтерактивної команди «H»."
#~ msgid "Starts \\*(We with the last remembered `i' state reversed. When this toggle is \\*F, tasks that have not used any \\*(PU since the last update will not be displayed. For additional information regarding this toggle \\*(Xt 4c. TASK AREA Commands, SIZE."
#~ msgstr "Запускає \\*(We із оберненням останнього збереженого стану «i». Якщо цей перемикач вимкнено, завдання, які не використовували центральний процесор з моменту останнього оновлення, не буде показано. Щоб дізнатися більше про цей перемикач, ознайомтеся з розділом 4в. КОМАНДИ ОБЛАСТІ ЗАВДАНЬ, РОЗМІР."
#~ msgid "Specifies the name of the field on which tasks will be sorted, independent of what is reflected in the configuration file. You can prepend a `+' or `-' to the field name to also override the sort direction. A leading `+' will force sorting high to low, whereas a `-' will ensure a low to high ordering."
#~ msgstr "Визначає назву поля, за яким буде упорядковано завдання, незалежно від того, що вказано у файлі налаштувань. Ви можете дописати «+» або «-» до назви поля, щоб змінити порядок. Початковий «+» визначає упорядковування від більших до менших значень, а початковий «-» — від менших до більших."
#~ msgid "This option acts as a form of help for the above -o option. It will cause \\*(We to print each of the available field names on a separate line, then quit. Such names are subject to NLS (National Language Support) translation."
#~ msgstr "Цей параметр працює як допоміжна форма для описаного вище параметра -o. Використання цього параметра наказує \\*(We виводити кожну назву доступного поля, а потім завершити роботу. Такі назви підлягають перекладу NLS (National Language Support)."
#~ msgid "Monitor only processes with specified process IDs. This option can be given up to \\*(WP times, or you can provide a comma delimited list with up to \\*(WP pids. Co-mingling both approaches is permitted."
#~ msgstr "Стежити лише за процесами із вказаними ідентифікаторами процесу. Цей параметр можна використати до \\*(WP разів або ви можете вказати список відокремлених комами аж до \\*(WP pid. Можна використовувати суміш обох записів."
#~ msgid "This is a \\*(CO only and should you wish to return to normal operation, it is not necessary to quit and restart \\*(We \\*(Em just issue any of these \\*(CIs: `=', `u' or `U'."
#~ msgstr "Це лише параметр командного рядка, і якщо ви хочете повернутися до звичайного режиму роботи програми, немає потреби у виході з програми і перезапуску \\*(Em просто видайте одну з таких інтерактивних команд: «=», «u» або «U»."
#~ msgid "Starts \\*(We with secure mode forced, even for root. This mode is far better controlled through a system \\*(CF (\\*(Xt 6. FILES)."
#~ msgstr "Примусово запускає \\*(We у захищеному режимі, навіть для користувача root. Цим режимом набагато краще керувати за допомогою загальносистемного файла налаштувань (див. розділ 6. ФАЙЛИ)."
#~ msgid "Starts \\*(We with the last remembered `S' state reversed. When Cumulative time mode is \\*O, each process is listed with the \\*(Pu time that it and its dead children have used. \\*(XC `S' \\*(CI for additional information regarding this mode."
#~ msgstr "Запускає \\*(We із станом, оберненим щодо останнього збереженого стану «S». Якщо режим накопиченого часу увімкнено, кожен процес буде показано із часом центрального процесора, який використано самим процесом і усіма його завершеними дочірніми процесами. Додаткові відомості щодо цього режиму можна отримати у розділі щодо інтерактивної команди «S»."
#~ msgid "Display only processes with a user id or user name matching that given. The `-u' option matches on I< effective> user whereas the `-U' option matches onI< any> user (real, effective, saved, or filesystem)."
#~ msgstr "Показати лише процеси із вказаним ідентифікатором користувача або іменем користувача. Параметр «-u» стосується I<ефективного> користувача, а параметр «-U» стосується I<будь-якого> користувача (справжнього, ефективного, збереженого або користувача файлової системи)."
#~ msgid "Prepending an exclamation point (`!') to the user id or name instructs \\*(We to display only processes with users not matching the one provided."
#~ msgstr "Додавання знаку оклику («!») до ідентифікатора користувача або імені наказує \\*(We показати лише процеси користувачів, які не збігаються із вказаним."
#~ msgid "In Batch mode, when used without an argument \\*(We will format output using the COLUMNS= and LINES= environment variables, if set. Otherwise, width will be fixed at the maximum \\*(WX columns. With an argument, output width can be decreased or increased (up to \\*(WX) but the number of rows is considered unlimited."
#~ msgstr "У пакетному режимі, коли програму використано без аргументів, \\*(We форматуватиме виведення з використанням змінних середовища COLUMNS= і LINES=, якщо значення цих змінних встановлено. Якщо значення не встановлено, ширину буде зафіксовано на максимальному значення у \\*(WX стовпчиків. Якщо вказано аргумент, ширину виведення буде зменшено або збільшено (аж до \\*(WX), а кількість рядків вважатиметься необмеженою."
#~ msgid "In normal display mode, when used without an argument \\*(We willI< attempt> to format output using the COLUMNS= and LINES= environment variables, if set. With an argument, output width can only be decreased, not increased. Whether using environment variables or an argument with -w, whenI< not> in Batch mode actual terminal dimensions can never be exceeded."
#~ msgstr "У режимі звичайного показу, якщо параметр вказано без аргументу \\*(We I<спробує> форматувати виведення з використанням змінних середовища COLUMNS= і LINES=, якщо їхні значення встановлено. Якщо аргумент вказано, ширину виведення може бути лише зменшено, а не збільшено. Буде використано змінні середовища чи аргумент з -w, якщо програма I<не> працює у пакетному режимі, справжні розмірності терміналу ніколи не може бути перевищено."
#~ msgid "\\*(NT Without the use of this \\*(CO, output width is always based on the terminal at which \\*(We was invoked whether or not in Batch mode."
#~ msgstr "\\*(NT Без використання цього параметра командного рядка, ширина виведення завжди обчислюється на основі термінала, з якого викликано \\*(We, незважаючи на те, чи запущено програму у пакетному режимі."
#~ msgid "Starts \\*(We with the last remembered Cpu States portion of the \\*(SA reversed. Either all \\*(Pu information will be displayed in a single line or each \\*(Pu will be displayed separately, depending on the state of the NUMA Node \\*(CT ('2')."
#~ msgstr "Запускає \\*(We із оберненим щодо останнього збереженого стану розділом станів центрального процесора обласіт резюме. Або дані щодо усіх центральних процесорів буде показано абоу єдиному рядку, або дані для кожного процесора буде показано окремо, залежно від стану перемикача вузлів NUMA Node («2»)."
#~ msgid "Each of the following three areas are individually controlled through one or more \\*(CIs. \\*(XT 4b. SUMMARY AREA Commands for additional information regarding these provisions."
#~ msgstr "Кожною з описаних нижче областей можна окремо керувати за допомогою однією або декількох інтерактивних команд. Див. розділ 4б. КОМАНДИ ОБЛАСТІ РЕЗЮМЕ, щоб дізнатися більше про ці команди."
#~ msgid "This portion consists of a minimum of two lines. In an SMP environment, additional lines can reflect individual \\*(PU state percentages."
#~ msgstr "Ця частина складається з принаймні двох рядків. У середовищі із симетричною багатопроцесорністю додаткові рядки може бути використано для показу окремих часток кожного процесора."
#~ msgid "Line 1 shows totalB< tasks> orB< threads>, depending on the state of the Threads-mode toggle. That total is further classified as:"
#~ msgstr "У першому рядку буде показано загальну кількість B<завдань> або B<потоків обробки>, залежно від стану перемикача режиму потоків. Загальні дані далі буде класифіковано так:"
#~ msgid "As a default, percentages for these individual categories are displayed. Where two labels are shown below, those for more recent kernel versions are shown first."
#~ msgstr "Типово, буде показано частки для наведених нижче категорій. Там, де нижче вказано дві мітки, першими є мірки для сучасніших версій ядер системи."
#~ " B<us>,B< user> : time running un-niced user processes\n"
#~ " B<sy>,B< system> : time running kernel processes\n"
#~ " B<ni>,B< nice> : time running niced user processes\n"
#~ " B<id>,B< idle> : time spent in the kernel idle handler\n"
#~ " B<wa>,B< IO-wait> : time waiting for I/O completion\n"
#~ " B<hi> : time spent servicing hardware interrupts\n"
#~ " B<si> : time spent servicing software interrupts\n"
#~ " B<st> : time stolen from this vm by the hypervisor\n"
#~ msgstr ""
#~ " B<us>,B< user> : час роботи непріоритетних процесів користувача\n"
#~ " B<sy>,B< system> : час роботи процесів ядра\n"
#~ " B<ni>,B< nice> : час роботи пріоритетних процесів користувача\n"
#~ " B<id>,B< idle> : час, витрачений у обробнику бездіяльності ядра\n"
#~ " B<wa>,B< IO-wait> : час очікування на завершення введення-виведення\n"
#~ " B<hi> : час, витрачений на обслуговування апаратних переривань\n"
#~ " B<si> : час, витрачений на обслуговування програмних переривань\n"
#~ " B<st> : час, викрадений з цієї ВМ гіпервізором\n"
#~ msgid "In the alternate cpu states display modes, beyond the first tasks/threads line, an abbreviated summary is shown consisting of these elements:"
#~ msgstr "У режимах альтернативного показу станів процесора, окрім першого рядка завдань/потоків, буде показано скорочене резюме, що складатиметься з таких елементів:"
#~ msgid "Where: a) is the `user' (us + ni) percentage; b) is the `system' (sy + hi + si) percentage; c) is the total; and d) is one of two visual graphs of those representations. \\*(XT 4b. SUMMARY AREA Commands and the `t' command for additional information on that special 4-way toggle."
#~ msgstr "Де а) частка «user» (us + ni); б) є часткою «system» (sy + hi + si); в) є загальні дані; іг) один з двох візуальних графіків цих представлень. Див. 4б. КОМАНДИ ОБЛАСТІ РЕЗЮМЕ і команду «t», щоб дізнатися більше про цей особливий чотирипозиційний перемикач."
#~ msgid "This portion consists of two lines which may express values in kibibytes (KiB) through exbibytes (EiB) depending on the scaling factor enforced with the `E' \\*(CI."
#~ msgstr "Ця частина складається з двох рядків, у яких може бути показано значення в одиницях від кібібайтів (КіБ) до ексбібайтів (ЕіБ) залежно від коефіцієнта масштабування, який визначається інтерактивною командою «E»."
#~ msgid "The B<avail> number on line 2 is an estimation of \\*(MP available for starting new applications, without swapping. Unlike the B<free> field, it attempts to account for readily reclaimable page cache and memory slabs. It is available on kernels 3.14, emulated on kernels 2.6.27+, otherwise the same as B<free>."
#~ msgstr "Число B<дост> у рядку 2 є оцінкою фізичної пам'яті, доступною для запуску нових програм, без резервної пам'яті на диску. На відміну від поля B<вільн>, програма спробує врахувати безпосередньо використовуваний кеш сторінок та шматки пам'яті. Дані доступні у ядрах після 3.14, їх емульовано у ядрах 2.6.27+, у інших випадках це те саме, що і B<вільн>."
#~ msgid "In the case of \\*(MP, the percentage represents the B<total> minus the estimated B<avail> noted above. The `Mem' graph itself is divided between B<used> and any remaining memory not otherwise accounted for by B<avail>. \\*(XT 4b. SUMMARY AREA Commands and the `m' command for additional information on that special 4-way toggle."
#~ msgstr "У випадку фізичної пам'яті частка відповідає різниці B<загал> і оцінки B<дост>, вказаний вище. Сам графік «Пам» поділено між B<вик.> та будь-якій решті пам'яті, яку інакше не враховано у B<дост>. Див. 4б. КОМАНДИ ОБЛАСТІ РЕЗЮМЕ та команду «m», щоб дізнатися більше про цей особливий чотирипозиційний перемикач."
#~ msgid "Listed below are \\*(We's available process fields (columns). They are shown in strict ascii alphabetical order. You may customize their position and whether or not they are displayable with the `f' or `F' (Fields Management) \\*(CIs."
#~ msgstr "Нижче наведено список доступних у \\*(We полів процесів (стовпчиків). Пункти вказано строго за абетковим порядком ASCII. Ви можете змінити їхні позиції та те, чи буде їх показано за допомогою інтерактивних команд «f» та «F» (керування полями)."
#~ msgid "Any field is selectable as the sort field, and you control whether they are sorted high-to-low or low-to-high. For additional information on sort provisions \\*(Xt 4c. TASK AREA Commands, SORTING."
#~ msgstr "Як поле для упорядковування можна використовувати будь-яке поле. Ви можете керувати тим, буде записи упорядковано за зростанням чи спаданням. Щоб дізнатися більше про упорядковування, зверніться до розділу 4в. КОМАНДИ ОБЛАСТІ ЗАВДАНЬ, УПОРЯДКОВУВАННЯ."
#~ msgid "The fields related to \\*(MP or \\*(MV reference `(KiB)' which is the unsuffixed display mode. Such fields may, however, be scaled from KiB through PiB. That scaling is influenced via the `e' \\*(CI or established for startup through a build option."
#~ msgstr "Дані у полях, які пов'язано із фізичною пам'яттю та віртуальною пам'яттю, використано «(КіБ)», режим показу без суфіксів одиниць. Втім, у таких полях можливе масштабування від КіБ до ПіБ. Це масштабування визначають інтерактивною командою «e» або під час запуску за допомогою параметра збирання."
#~ msgid "In a true SMP environment, if a process is multi-threaded and \\*(We is I<not> operating in Threads mode, amounts greater than 100% may be reported. You toggle Threads mode with the `H' \\*(CI."
#~ msgstr "У справжньому середовищі із симетричною багатопроцесорністю, якщо процес є багатопотоковим, і \\*(We I<не> працює у режимі потоків, може бути показано значення більші за 100%. Перемкнути режим потоків можна за допомогою інтерактивної команди «H»."
#~ msgid "Also for multi-processor environments, if Irix mode is \\*F, \\*(We will operate in Solaris mode where a task's \\*(Pu usage will be divided by the total number of \\*(PUs. You toggle Irix/Solaris modes with the `I' \\*(CI."
#~ msgstr "Також для багатопроцесорних середовищ, якщо режим Irix \\*F, \\*(We працюватиме у режимі Solaris, у якому використання процесора завданням буде поділено на загальну кількість процесорів. Перемкнути режими Irix/Solaris можна за допомогою інтерактивної команди «I»."
#~ msgid "\\*(NT When running in forest view mode (`V') with children collapsed (`v'), this field will also include the \\*(PU time of those unseen children. \\*(XT 4c. TASK AREA Commands, CONTENT for more information regarding the `V' and `v' toggles."
#~ msgstr "\\*(NT Якщо програма працює у режимі перегляду лісу («V») зі згорнутими дочірніми процесами («v»), до цього поля також буде включено час процесора для цих невидимих дочірніх процесів. Див. розділ 4в. КОМАНДИ ОБЛАСТІ ЗАВДАНЬ, ВМІСТ, щоб дізнатися більше про перемикачі «V» та «v»."
#~ msgid "This will typically be the last entry in the full list of control groups as shown under the next heading (CGROUPS). And as is true there, this field is also variable width."
#~ msgstr "Це, типово, буде останній запис у повному списку груп керування, показаного під наступним заголовком (CGROUPS). Це поле також має змінну ширину."
#~ msgid "Control Groups provide for allocating resources (cpu, memory, network bandwidth, etc.) among installation-defined groups of processes. They enable fine-grained control over allocating, denying, prioritizing, managing and monitoring those resources."
#~ msgstr "Групи керування призначено для розподілу ресурсів (процесора, пам'яті, каналу мережі тощо) серед визначених під час встановлення груп процесів. Вони уможливлюють тонкий контроль над розподілом ресурсів, забороною використання ресурсів, пріоритетами у використанні ресурсів, керування ресурсами та спостереження за ресурсами."
#~ msgid "Many different hierarchies of cgroups can exist simultaneously on a system and each hierarchy is attached to one or more subsystems. A subsystem represents a single resource."
#~ msgstr "Одночасно у системі може бути багато різних ієрархій груп керування. Кожну з ієрархій пов'язано із однією або декількома підсистемами. Підсистема відповідає єдиному ресурсу."
#~ msgid "\\*(NT The CGROUPS field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
#~ msgstr "\\*(NT Поле CGROUPS, на відміну від більшості стовпчиків, не є полем фіксованої ширини. Якщо його показано, воно разом із іншими полями змінної ширини доповнюватиме текст у рядку до межі ширини екрана (аж до максимальної ширини у \\*(WX символів). Попри це, такі поля змінної ширини теж можуть підлягати обрізанню. Див. розділ 5в. ГОРТАННЯ ВІКНА, щоб дізнатися більше про доступ до будь-яких обрізаних даних."
#~ msgid "The amount of \\*(MP currently devoted to executable code, also known as the Text Resident Set size or TRS."
#~ msgstr "Обсяг фізичної пам'яті, яку у поточний момент призначено для виконуваного коду, також відома як розмір Text Resident Set (TRS або текстового резидентного набору)."
#~ msgid "Display the command line used to start a task or the name of the associated program. You toggle between commandI< line> andI< name> with `c', which is both a \\*(CO and an \\*(CI."
#~ msgstr "Показує рядок команди, який використано для запуску завдання або назву пов'язаної із ним програми. Перемикання між показом I<рядка> і I<назви> можна виконувати за допомогою «c», параметра командного рядка або інтерактивної команди."
#~ msgid "\\*(NT The COMMAND field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. This is especially true for this field when command lines are being displayed (the `c' \\*(CI.) \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
#~ msgstr "\\*(NT Поле COMMAND, на відміну від більшості стовпчиків, не є полем фіксованої ширини. Якщо його показано, воно разом із іншими полями змінної ширини доповнюватиме текст у рядку до межі ширини екрана (аж до максимальної ширини у \\*(WX символів). Попри це, такі поля змінної ширини теж можуть підлягати обрізанню. Це особливо стосується цього поля при показі рядків команди (інтерактивна команда «c».) Див. розділ 5в. ГОРТАННЯ ВІКНА, щоб дізнатися більше про доступ до будь-яких обрізаних даних."
#~ msgid "The amount of private memory I<reserved> by a process. It is also known as the Data Resident Set or DRS. Such memory may not yet be mapped to \\*(MP (RES) but will always be included in the \\*(MV (VIRT) amount."
#~ msgstr "Обсяг приватної пам'яті, який I<зарезервовано> процесом. Ця пам'ять має назву Data Resident Set (DRS або резидентний набір даних). Таку пам'ять ще не може бути пов'язано із фізичною пам'яттю (RES), але її буде завжди включено в обсяг віртуальної пам'яті (VIRT)."
#~ msgid "Display all of the environment variables, if any, as seen by the respective processes. These variables will be displayed in their raw native order, not the sorted order you are accustomed to seeing with an unqualified `set'."
#~ msgstr "Показ усіх змінних середовища, якщо такі визначено, з точки зору відповідних процесів. Ці змінні буде показано у їхньому необробленому порядку, а не в упорядкованому вигляд, до якого ви звикли бачити у виведенні «set»."
#~ msgid "\\*(NT The ENVIRON field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. This is especially true for this field. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
#~ msgstr "\\*(NT Поле ENVIRON, на відміну від більшості стовпчиків, не є полем фіксованої ширини Якщо його показано, воно разом із іншими полями змінної ширини доповнюватиме текст у рядку до межі ширини екрана (аж до максимальної ширини у \\*(WX символів). Попри це, такі поля змінної ширини теж можуть підлягати обрізанню. Це особливо стосується цього поля. Див. розділ 5в. ГОРТАННЯ ВІКНА, щоб дізнатися більше про доступ до будь-яких обрізаних даних."
#~ msgid "This column represents the task's current scheduling flags which are expressed in hexadecimal notation and with zeros suppressed. These flags are officially documented in E<lt>linux/sched.hE<gt>."
#~ msgstr "У цьому стовпчику буде показано поточні прапорці планування завдання, які буде виражено у шістнадцятковому форматі із придушенням нулів. Ці прапорці офіційно документовано у E<lt>linux/sched.hE<gt>."
#~ msgid "The nice value of the task. A negative nice value means higher priority, whereas a positive nice value means lower priority. Zero in this field simply means priority will not be adjusted in determining a task's dispatch-ability."
#~ msgstr "Значення пріоритетності (nice) завдання. Від'ємне значення пріоритетності означає вищу пріоритетність, а додатне значення — нижчу. Нульове значення у цьому полі просто означає, що при виділенні ресурсів для цього завдання коригування пріоритетності не відбуватиметься."
#~ msgid "A number representing the NUMA node associated with the last used processor (`P'). When -1 is displayed it means that NUMA information is not available."
#~ msgstr "Число, яке відповідає номеру вузла NUMA, з яким пов'язано останній використаний процесор («P»). Якщо тут показано -1, дані щодо NUMA є недоступними."
#~ msgid "The value, ranging from -1000 to +1000, added to the current out of memory score (OOMs) which is then used to determine which task to kill when memory is exhausted."
#~ msgstr "Значення у діапазоні від -1000 до +1000, яке буде додано до поточного рахунку виходу за межі пам'яті (OOM), яке потім буде використано для визначення того, виконання якого завдання слід припинити, якщо пам'ять буде вичерпано."
#~ msgid "The value, ranging from 0 to +1000, used to select task(s) to kill when memory is exhausted. Zero translates to `never kill' whereas 1000 means `always kill'."
#~ msgstr "Значення у діапазоні від 0 до +1000, яке буде використано для вибору завдань, виконання яких слід припинити, якщо буде вичерпано пам'ять. Нульове значення означає «ніколи не припиняти», а значення 1000 означає «припиняти завжди»."
#~ msgid "A number representing the last used processor. In a true SMP environment this will likely change frequently since the kernel intentionally uses weak affinity. Also, the very act of running \\*(We may break this weak affinity and cause more processes to change \\*(PUs more often (because of the extra demand for \\*(Pu time)."
#~ msgstr "Число, яке відповідає номеру останнього використаного процесора. У середовищах із істинною симетричною багатопроцесорністю це значення, ймовірно, часто змінюватиметься, оскільки ядро навмисне використовує слабку прив'язку до процесорів. Крім того, сам запуск \\*(We може порушити цю слабку прив'язку, і спричинити частішу зміну процесорів для більшої кількості завдань (через додаткову потребу у процесорному часі)."
#~ msgid "Every process is member of a unique process group which is used for distribution of signals and by terminals to arbitrate requests for their input and output. When a process is created (forked), it becomes a member of the process group of its parent. By convention, this value equals the process ID (\\*(Xa PID) of the first member of a process group, called the process group leader."
#~ msgstr "Кожен процес є учасником унікальної групи процесів, яку використовують для розподілу сигналів, а також терміналами для розподілу запитів щодо введення і виведення. При створенні (відгалуженні) процесу він стає учасником групи проєктів його батьківського процесу. За угодою, це значення дорівнює ідентифікатору процесу (\\*(Xa PID) першого учасника групи процесів, який називають лідером групи процесів."
#~ msgid "The task's unique process ID, which periodically wraps, though never restarting at zero. In kernel terms, it is a dispatchable entity defined by a task_struct."
#~ msgstr "Унікальний ідентифікатор процесу завдання, який система періодично циклічно перепризначає, хоча ніколи не розпочинає відлік з нуля. У термінах ядра це розподілений запис, який визначено task_struct."
#~ msgid "This value may also be used as: a process group ID (\\*(Xa PGRP); a session ID for the session leader (\\*(Xa SID); a thread group ID for the thread group leader (\\*(Xa TGID); and a TTY process group ID for the process group leader (\\*(Xa TPGID)."
#~ msgstr "Це значення також може бути використано як ідентифікатор групи процесів (\\*(Xa PGRP); ідентифікатор сеансу для лідера сеансу (\\*(Xa SID); ідентифікатор групи потоків для лідера групи потоків (\\*(Xa TGID); і ідентифікатор групи процесів термінала для лідера групи процесів (\\*(Xa TPGID)."
#~ msgid "The scheduling priority of the task. If you see `rt' in this field, it means the task is running under real time scheduling priority."
#~ msgstr "Пріоритетність планування завдання. Якщо ви бачите у цьому полі «rt», це означає, що завдання працює із плануванням у режимі реального часу."
#~ msgid "Under linux, real time priority is somewhat misleading since traditionally the operating itself was not preemptible. And while the 2.6 kernel can be made mostly preemptible, it is not always so."
#~ msgstr "У linux пріоритетність реального часу є дещо оманливим терміном, оскільки, традиційно, сама система не була системою із витісненням. І хоча ядро 2.6 можна зробити ядром, яке є здебільшого придатним до витіснення, працює це не завжди."
#~ msgid "A subset of the virtual address space (VIRT) representing the non-swapped \\*(MP a task is currently using. It is also the sum of the RSan, RSfd and RSsh fields."
#~ msgstr "Піднабір простору віртуальних адрес (VIRT) який відповідає фізичний пам'яті без резервної пам'яті на диску, яку завдання використовує у поточний момент. Це також сума значень у полях RSan, RSfd і RSsh."
#~ msgid "It can include private anonymous pages, private pages mapped to files (including program images and shared libraries) plus shared anonymous pages. All such memory is backed by the \\*(MS represented separately under SWAP."
#~ msgstr "Може включати приватні анонімні сторінки, приватні сторінки, які пов'язано із файлами (включно із образами програм та бібліотеками спільного використання) разом із анонімними сторінками спільного використання. Резервне копіювання усієї цієї пам'яті здійснюється до файла резервної пам'яті, який окремо показано у полі SWAP."
#~ msgid "Lastly, this field may also include shared file-backed pages which, when modified, act as a dedicated \\*(MS and thus will never impact SWAP."
#~ msgstr "Нарешті, це поле також може включати спільні сторінки із резервними копіями у файлах, які, якщо до них внесено зміни, працюють як файл резервної пам'яті і, таким чином, ніколи не впливають на значення SWAP."
#~ msgid "A subset of resident memory (RES) representing the implicitly shared pages supporting program images and shared libraries. It also includes explicit file mappings, both private and shared."
#~ msgstr "Підмножина резидентної пам'яті (RES), що відповідають неявно спільним сторінкам, які підтримують образи програм та бібліотеки спільного використання. Сюди також включено явні прив'язки до файлів, приватні та спільні."
#~ msgid "Tasks shown as running should be more properly thought of as ready to run \\*(Em their task_struct is simply represented on the Linux run-queue. Even without a true SMP machine, you may see numerous tasks in this state depending on \\*(We's delay interval and nice value."
#~ msgstr "Завдання, які показано як такі, які працюють, правильніше було б назвати готовими до роботи \\*(Em їхня task_struct є просто представлена у черзі роботи Linux. Навіть без справжньої машини із симетричною багатопроцесорністю ви можете побачити чисельні завдання у цьому стані. Кількість залежатиме від інтервалу затримки \\*(We та значення пріоритетності (nice)."
#~ msgid "A subset of resident memory (RES) that may be used by other processes. It will include shared anonymous pages and shared file-backed pages. It also includes private pages mapped to files representing program images and shared libraries."
#~ msgstr "Підмножина резидентної пам'яті (RES), яку може бути використано іншими процесами. Сюди буде включено спільні анонімні сторінки та спільні сторінки із резервними копіями на диску. Також буде включено приватні сторінки, які пов'язано із файлами, що відповідають образам програм та бібліотекам спільного використання."
#~ msgid "A session is a collection of process groups (\\*(Xa PGRP), usually established by the login shell. A newly forked process joins the session of its creator. By convention, this value equals the process ID (\\*(Xa PID) of the first member of the session, called the session leader, which is usually the login shell."
#~ msgstr "Сеанс — збірка груп процесів (\\*(Xa PGRP), зазвичай, встановлюється оболонкою входу до системи. Новий відгалужений процес долучається до сеансу свого породжувача. За угодою, це значення дорівнює ідентифікатору процесу (\\*(Xa PID) першого учасника сеансу, якого називають лідером сеансу, яким, зазвичай, є оболонка входу до системи."
#~ msgid "The IDs of any supplementary group(s) established at login or inherited from a task's parent. They are displayed in a comma delimited list."
#~ msgstr "Ідентифікатори будь-яких допоміжних груп, які встановлено під час входу до системи або успадковано від батьківського процесу завдання. Ідентифікатори буде показано у форматі списку відокремлених комами значень."
#~ msgid "\\*(NT The SUPGIDS field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
#~ msgstr "\\*(NT Поле SUPGIDS, на відміну від більшості стовпчиків, не є полем фіксованої ширини. Якщо його показано, воно разом із іншими полями змінної ширини доповнюватиме текст у рядку до межі ширини екрана (аж до максимальної ширини у \\*(WX символів). Попри це, такі поля змінної ширини теж можуть підлягати обрізанню. Див. розділ 5в. ГОРТАННЯ ВІКНА, щоб дізнатися більше про доступ до будь-яких обрізаних даних."
#~ msgid "The names of any supplementary group(s) established at login or inherited from a task's parent. They are displayed in a comma delimited list."
#~ msgstr "Назви будь-яких допоміжних груп, які встановлено під час входу до системи або успадковано від батьківського процесу завдання. Ідентифікатори буде показано у форматі списку відокремлених комами значень."
#~ msgid "\\*(NT The SUPGRPS field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
#~ msgstr "\\*(NT Поле SUPGRPS, на відміну від більшості стовпчиків, не є полем фіксованої ширини. Якщо його показано, воно разом із іншими полями змінної ширини доповнюватиме текст у рядку до межі ширини екрана (аж до максимальної ширини у \\*(WX символів). Попри це, такі поля змінної ширини теж можуть підлягати обрізанню. Див. розділ 5в. ГОРТАННЯ ВІКНА, щоб дізнатися більше про доступ до будь-яких обрізаних даних."
#~ msgid "The ID of the thread group to which a task belongs. It is the PID of the thread group leader. In kernel terms, it represents those tasks that share an mm_struct."
#~ msgstr "Ідентифікатор групи потоків, до якої належить завданням. Це PID лідера групи потоків обробки. У термінах ядра відповідає тим завданням, які спільно використовують mm_struct."
#~ msgid "Total \\*(PU time the task has used since it started. When Cumulative mode is \\*O, each process is listed with the \\*(Pu time that it and its dead children have used. You toggle Cumulative mode with `S', which is both a \\*(CO and an \\*(CI. \\*(XC `S' \\*(CI for additional information regarding this mode."
#~ msgstr "Загальний час процесора, який було використано завданням з моменту запуску. Якщо накопичувальний режим \\*O, кожен процес буде показано у списку із часом процесора, який було використано процесом і його завершеними дочірніми процесами. Перемкнути накопичувальний режим можна за допомогою «S», параметра командного рядка та інтерактивної команди. Див. інтерактивну команду «S», щоб дізнатися більше про цей режим."
#~ msgid "The process group ID of the foreground process for the connected tty, or -1 if a process is not connected to a terminal. By convention, this value equals the process ID (\\*(Xa PID) of the process group leader (\\*(Xa PGRP)."
#~ msgstr "Ідентифікатор групи процесів основного процесу для з'єднаного термінала або -1, якщо процес не з'єднано із терміналом. За угодою, це значення дорівнює ідентифікатору процесу (\\*(Xa PID) лідера групи процесів (\\*(Xa PGRP)."
#~ msgid "The name of the controlling terminal. This is usually the device (serial port, pty, etc.) from which the process was started, and which it uses for input or output. However, a task need not be associated with a terminal, in which case you'll see `?' displayed."
#~ msgstr "Назва термінала керування. Це, зазвичай, пристрій (послідовний порт, pty тощо) з якого було запущено процес і який процес використовує для введення або виведення даних. Втім, завдання не обов'язково має бути пов'язано із терміналом. Для не пов'язаних із терміналом завдань буде показано «?»."
#~ msgid "The total amount of \\*(MV used by the task. It includes all code, data and shared libraries plus pages that have been swapped out and pages that have been mapped but not used."
#~ msgstr "Загальний обсяг віртуальної пам'яті, яку використано процесом. До використаної пам'яті буде включено увесь код, дані та спільні бібліотеки, а також сторінки, які було скинуто до резервної пам'яті на диску, та сторінки, які було пов'язано з процесами, але не було використано."
#~ msgid "This field will show the name of the kernel function in which the task is currently sleeping. Running tasks will display a dash (`-') in this column."
#~ msgstr "У цьому полі буде показано назву функції ядра, у якій зараз приспано завдання. Для завдань, які виконуються, у цьому стовпчику буде показано дефіс («-»)."
#~ msgid "The number of pages that have been modified since they were last written to \\*(AS. Dirty pages must be written to \\*(AS before the corresponding physical memory location can be used for some other virtual page."
#~ msgstr "Кількість сторінок, які було змінено з моменту запису їх до допоміжного сховища даних. Зіпсовані сторінки має бути записано до допоміжного сховища до того, як відповідне місце у фізичній пам'яті може бути використано для якоїсь іншої віртуальної сторінки."
#~ msgid "The number ofB< major> page faults that have occurred for a task. A page fault occurs when a process attempts to read from or write to a virtual page that is not currently present in its address space. A major page fault is when \\*(AS access is involved in making that page available."
#~ msgstr "Кількість B<основних> помилок сторінок, які сталися для завдання. Помилка сторінки стається, якщо процес намагається прочитати дані з віртуальної сторінки, якої немає у його адресному просторі, або записати дані до цієї сторінки. До основної помилки сторінок призводить доступ до допоміжного сховища у процесі відкриття доступу до сторінки."
#~ msgid "The number ofB< minor> page faults that have occurred for a task. A page fault occurs when a process attempts to read from or write to a virtual page that is not currently present in its address space. A minor page fault does not involve \\*(AS access in making that page available."
#~ msgstr "Кількість B<незначних> помилок сторінок, які сталися для завдання. Помилка сторінки стається, якщо процес намагається прочитати дані з віртуальної сторінки, якої немає у його адресному просторі, або записати дані до цієї сторінки. До незначних помилок сторінок призводить процес відкриття доступу до сторінки без доступу до допоміжного сховища."
#~ msgid "The Inode of the namespace used to isolate interprocess communication (IPC) resources such as System V IPC objects and POSIX message queues."
#~ msgstr "Inode простору назв, який використано для ізолювання ресурсів обміну даними між процесами (IPC), зокрема об'єктів IPC System V та черг повідомлень POSIX."
#~ msgid "The Inode of the namespace used to isolate filesystem mount points thus offering different views of the filesystem hierarchy."
#~ msgstr "Inode простору назв, який використано для ізолювання точок монтування файлової системи, і отже, надання різних точок зору на ієрархію файлової системи."
#~ msgid "The Inode of the namespace used to isolate resources such as network devices, IP addresses, IP routing, port numbers, etc."
#~ msgstr "Inode простору назв, який використано для ізолювання ресурсів, подібних до мережевих пристроїв, IP-адрес, IP-маршрутів, номерів портів тощо."
#~ msgid "The Inode of the namespace used to isolate process ID numbers meaning they need not remain unique. Thus, each such namespace could have its own `init/systemd' (PID #1) to manage various initialization tasks and reap orphaned child processes."
#~ msgstr "Inode простору назв, який використано для ізолювання номерів ідентифікаторів процесів, що означає, що вони не повинні лишатися унікальними. Таким чином, кожен простір назв може мати власний «init/systemd» (PID #1) для керування різноманітними завданнями з ініціалізації та прибирання осиротілих дочірніх процесів."
#~ msgid "The Inode of the namespace used to isolate the user and group ID numbers. Thus, a process could have a normal unprivileged user ID outside a user namespace while having a user ID of 0, with full root privileges, inside that namespace."
#~ msgstr "Inode простору назв, який використано для ізолювання числових ідентифікаторів користувачів і груп. Таким чином, процес може мати звичайни ідентифікатор непривілейованого користувача поза простором назв користувача, маючи ідентифікатор користувача 0, із повними привілеями root всередині цього простору назв."
#~ msgid "After pressing the \\*(CI `f' or `F' (Fields Management) you will be presented with a screen showing: 1) the \\*(CW name; 2) the designated sort field; 3) all fields in their current order along with descriptions. Entries marked with an asterisk are the currently displayed fields, screen width permitting."
#~ msgstr "У відповідь на натискання клавіші інтерактивної команди «f» або «F» (керування полями) програма покаже вам екран із: 1) назвою «поточного» вікна; 2) призначеним полем упорядковування; 3) усіма полями у поточному порядку разом із їхніми описами. Пункти, які позначено зірочкою є поточними показаними полями, перегляд яких уможливлює ширина екрана."
#~ msgid "As the on screen instructions indicate, you navigate among the fields with theB< Up> andB< Down> \\*(KAs. The PgUp, PgDn, Home and End keys can also be used to quickly reach the first or last available field."
#~ msgstr "Як буде вказано у настановах на екрані, пересуватися між полями можна за допомогою клавіш зі стрілками вгору і вниз. Також можна скористатися клавішами PgUp, PgDn, Home та End для пришвидшеного доступу до першого і останнього з доступних полів."
#~ msgid "TheB< Right> \\*(KA selects a field for repositioning and theB< Left> \\*(KA or the E<lt>B<Enter>E<gt> key commits that field's placement."
#~ msgstr "Клавіша зі стрілкою B<праворуч> позначає поле для зміни розташування, а клавіша зі стрілкою B<ліворуч> та клавіша E<lt>B<Enter>E<gt> фіксують розташування поля."
#~ msgid "The `B<s>' key designates a field as the sort field. \\*(XT 4c. TASK AREA Commands, SORTING for additional information regarding your selection of a sort field."
#~ msgstr "Клавіша «B<s>» позначає поле, як поле для упорядковування. Див. 4в. КОМАНДИ ОБЛАСТІ ЗАВДАНЬ, УПОРЯДКОВУВАННЯ, щоб отримати додаткові відомості щодо вибору поля для упорядковування."
#~ msgid "The `B<a>' and `B<w>' keys can be used to cycle through all available windows and the `B<q>' or E<lt>B<Esc>E<gt> keys exit Fields Management."
#~ msgstr "Клавішами «B<a>» і «B<w>» можна скористатися для циклічного переходу усіма доступними вікнами, а клавішами «B<q>» та E<lt>B<Esc>E<gt> для виходу з керування полями."
#~ msgid "The Fields Management screen can also be used to change the \\*(CG in either \\*(FM or \\*(AM. Whatever was targeted when `q' or E<lt>EscE<gt> was pressed will be made current as you return to the \\*(We display. \\*(XT 5. ALTERNATE-DISPLAY Provisions and the `g' \\*(CI for insight into \\*(CWs and \\*(FGs."
#~ msgstr "Екраном керування полями також можна скористатися для внесення змін до поточного вікна або групи полів у повноекранному режимі показу або режимі альтернативного показу. Що б не було позначено у момент натискання «q» або E<lt>EscE<gt>, його буде зроблено поточним при повернення до показу \\*(We. Див. розділ 5. ПОЛОЖЕННЯ АЛЬТЕРНАТИВНОГО ПОКАЗУ та інтерактивну команду «g», щоб дізнатися більше про «поточні» вікна і групи полів."
#~ msgid "\\*(NT Any window that has been scrolledI< horizontally> will be reset if any field changes are made via the Fields Management screen. AnyI< vertical> scrolled position, however, will not be affected. \\*(XT 5c. SCROLLING a Window for additional information regarding vertical and horizontal scrolling."
#~ msgstr "\\*(NT Будь-яке вікно, у якому було виконано гортання у I<горизонтальному> буде скинуто до типового стану, якщо буде внесено будь-які зміни до полів за допомогою екрана керування полями. Втім, будь-яку позицію I<вертикального> гортання буде збережено. Див. 5в. ГОРТАННЯ ВІКНА, щоб отримати додаткові відомості щодо вертикального та горизонтального гортання."
#~ msgid "Listed below is a brief index of commands within categories. Some commands appear more than once \\*(Em their meaning or scope may vary depending on the context in which they are issued."
#~ msgstr "Нижче наведено короткий покажчик команд у категоріях. Деякі команди у списку трапляються декілька разів \\*(Em їхнє призначення та область дії можуть змінюватися, залежно від контексту, у якому їх віддано."
#~ msgid "The global \\*(CIs areB< always> available in both \\*(FM and \\*(AM. However, some of these \\*(CIs areB< not available> when running in Secure mode."
#~ msgstr "Загальні інтерактивні команди B<завжди> доступні у повноекранному режимі та режимі альтернативного показу. Втім, деякі з цих інтерактивних команд B<не є доступними>, якщо програма працює у захищеному режимі."
#~ msgid "If you wish to know in advance whether or not your \\*(We has been secured, simply ask for help and view the system summary on the second line."
#~ msgstr "Якщо ви хочете наперед знати, чи захищено роботу вашої копії програми \\*(We, просто віддайте команду показу довідки і перегляньте резюме щодо системи у другому рядку."
#~ msgid "These commands awaken \\*(We and following receipt of any input the entire display will be repainted. They also force an update of any hotplugged \\*(Pu or \\*(MP changes."
#~ msgstr "Ці команди пробуджують \\*(We і, відповідно до інструктування за вхідними даними, буде перемальовано усі показані дані. Це також призведе до примусового оновлення усіх інтерактивних змін у процесорах та фізичній пам'яті."
#~ msgid "There are two help levels available. The first will provide a reminder of all the basic \\*(CIs. If \\*(We isI< secured>, that screen will be abbreviated."
#~ msgstr "Доступні два рівня довідки. На першому програма покаже нагадування щодо усіх базових інтерактивних команд. Якщо \\*(We працює у I<захищеному> режимі, екран довідки буде скорочено."
#~ msgid "Typing `h' or `?' on that help screen will take you to help for those \\*(CIs applicable to \\*(AM."
#~ msgstr "Натискання «h» або «?» на цьому екрані довідки призведе до показу довідки для цих інтерактивних команд із застосуванням до режиму альтернативного показу."
#~ msgid "Removes restrictions on what is shown. This command will reverse any `i' (idle tasks), `n' (max tasks) and `v' (hide children) commands that might be active. It also provides for an exit from PID monitoring, User filtering, Other filtering, Locate processing and Combine Cpus mode."
#~ msgstr "Знімає обмеження на показ. Ця команда обертає будь-які команди «i» (бездіяльні завдання), «n» (максимальна кількість завдань) і «v» (приховати дочірні), які могли бути активними. Команду також призначено для виходу із режимів спостереження за PID, фільтрування за користувачами, іншого фільтрування, обробки пошуку та режиму поєднання процесорів."
#~ msgid "This command determines whether zeros are shown or suppressed for many of the fields in a \\*(TW. Fields like UID, GID, NI, PR or P are not affected by this toggle."
#~ msgstr "Ця команда визначає, буде показано нулі чи нулі буде приховано для багатьох полів у вікні завдань. Цей перемикач не впливає на показ даних у полях UID, GID, NI, PR та P."
#~ msgid "This command will switch between \\*(FM and \\*(AM. \\*(XT 5. ALTERNATE-DISPLAY Provisions and the `g' \\*(CI for insight into \\*(CWs and \\*(FGs."
#~ msgstr "Ця команда перемикає програму між повноекранним режимом і режимом альтернативного показу. Див. розділ 5. ПОЛОЖЕННЯ АЛЬТЕРНАТИВНОГО ПОКАЗУ та інтерактивну команду «g», щоб дізнатися більше про «поточні» вікна і групи полів."
#~ msgid "This command will influence use of the bold terminfo capability and altersB< both> the \\*(SA and \\*(TA for the \\*(CW. While it is intended primarily for use with dumb terminals, it can be applied anytime."
#~ msgstr "Ця команда впливає на використання можливостей показу напівжирного тексту terminfo і змінює B<одразу> область резюме та область завдань для «поточного» вікна. Хоча цю команду призначено, в основному, для «простих» терміналів, нею можна скористатися у будь-якому терміналі."
#~ msgid "\\*(NT When this toggle is \\*O and \\*(We is operating in monochrome mode, theB< entire display> will appear as normal text. Thus, unless the `x' and/or `y' toggles are using reverse for emphasis, there will be no visual confirmation that they are even on."
#~ msgstr "\\*(NT Якщо цей перемикач \\*O, і \\*(We працює у монохромному режимі, для B<усього дисплея> буде використано звичайний текст. Таким чином, якщо не використано перемикач «x» і/або«y» для обернення акцентування тексту, не буде ніякого візуального підтвердження, що ці перемикачі увімкнено."
#~ msgid "Fractional seconds are honored, but a negative number is not allowed. Entering 0 causes (nearly) continuous updates, with an unsatisfactory display as the system and tty driver try to keep up with \\*(We's demands. The delay value is inversely proportional to system loading, so set it with care."
#~ msgstr "Буде враховано вказані дробові частки секунд, але від'ємні числа використовувати не можна. Введення 0 спричинить (майже) неперервне оновлення даних із незадовільними результатами, оскільки система та драйвер термінала намагатимуться задовольнити вимоги \\*(We. Значення затримки є обернено пропорційним до навантаження на систему, тому встановлювати його слід обережно."
#~ msgid "If at any time you wish to know the current delay time, simply ask for help and view the system summary on the second line."
#~ msgstr "Якщо вам захочеться переглянути поточне значення часу затримки, просто віддайте команду показу довідки і перегляньте резюме щодо системи у другому рядку."
#~ msgid "With this command you can cycle through the available \\*(SA memory scaling which ranges from KiB (kibibytes or 1,024 bytes) through EiB (exbibytes or 1,152,921,504,606,846,976 bytes)."
#~ msgstr "За допомогою цієї команди ви можете циклічно перемикати доступні масштаби пам'яті в області резюме, від КіБ (кібібайтів або 1024 байтів) до ЕіБ (ексбібайтів або 1152921504606846976 байтів)."
#~ msgid "If you see a `+' between a displayed number and the following label, it means that \\*(We was forced to truncate some portion of that number. By raising the scaling factor, such truncation can be avoided."
#~ msgstr "Якщо ви побачите «+» між показаним числом та наступною міткою, це означатиме, що програма \\*(We примусово обрізала частину числа. Обрізання можна уникнути, якщо збільшити коефіцієнт масштабування."
#~ msgid "With this command you can cycle through the available \\*(TA memory scaling which ranges from KiB (kibibytes or 1,024 bytes) through PiB (pebibytes or 1,125,899,906,842,624 bytes)."
#~ msgstr "За допомогою цієї команди ви можете циклічно перемикати доступні масштаби пам'яті в області завдань, від КіБ (кібібайтів або 1024 байтів) до ПіБ (пібібайтів або 1125899906842624 байтів)."
#~ msgid "While \\*(We will try to honor the selected target range, additional scaling might still be necessary in order to accommodate current values. If you wish to see a more homogeneous result in the memory columns, raising the scaling range will usually accomplish that goal. Raising it too high, however, is likely to produce an all zero result which cannot be suppressed with the `0' \\*(CI."
#~ msgstr "Хоча \\*(We намагатиметься зважати на вибраний діапазон цілей, може знадобитися додаткове масштабування з метою пристосування до поточних значень. Якщо вам потрібен більш однорідний результат у стовпчиках пам'яті, цілі можна, зазвичай, досягти збільшенням діапазону масштабування. Втім, надмірне його підняття, ймовірно, призведе до показу одних нулів, які не можна буде придушити інтерактивною командою «0»."
#~ msgid "You will be prompted to enter a number between 1 and 4 designating the \\*(FG which should be made the \\*(CW. You will soon grow comfortable with these 4 windows, especially after experimenting with \\*(AM."
#~ msgstr "Програма попросить вас ввести число від 1 до 4, яке позначатиме групу полів, яку слід зробити «поточним» вікном. Звикнути до цих 4 вікон доволі просто, особливо після експериментування із режимом альтернативного показу."
#~ msgid "When this toggle is \\*O, individual threads will be displayed for all processes in all visible \\*(TWs. Otherwise, \\*(We displays a summation of all threads in each process."
#~ msgstr "Якщо цей перемикач \\*O, для усіх процесів в усіх видимих вікнах завдань буде показано окремі потоки обробки. Якщо перемикач вимкнено, \\*(We покаже суму за усіма потоками для кожного процесу."
#~ msgid "When operating in Solaris mode (`I' toggled \\*F), a task's \\*(Pu usage will be divided by the total number of \\*(PUs. After issuing this command, you'll be told the new state of this toggle."
#~ msgstr "Якщо програма працює у режимі Solaris («I» у стані \\*F), використання процесора завданням буде поділено на загальну кількість процесорів. Після того, як буде віддано цю команду, програма повідомить вам про новий стан перемикача."
#~ msgid "Entering no PID or a negative number will be interpreted as the default shown in the prompt (the first task displayed). A PID value of zero means the \\*(We program itself."
#~ msgstr "Якщо PID не буде введено або буде введено від'ємне число, програма використає типове значення, яке показано у запиті щодо команди (перше показане завдання). Нульове значення PID означає саму програму \\*(We."
#~ msgid "A positive nice value will cause a process to lose priority. Conversely, a negative nice value will cause a process to be viewed more favorably by the kernel. As a general rule, ordinary users can only increase the nice value and are prevented from lowering it."
#~ msgstr "Додатне значення пріоритетності (nice) спричиняє втрату пріоритетності процесом. І навпаки, від'ємне значення пріоритетності призводить до того, що ядро розглядатиме процес як пріоритетніший. Загалом, звичайні користувачі можуть лише збільшувати значення пріоритетності і не можуть його зменшувати."
#~ msgid "This will save all of your options and toggles plus the current display mode and delay time. By issuing this command just before quitting \\*(We, you will be able restart later in exactly that same state."
#~ msgstr "У результаті усі ваші значення параметрів і перемикачів, разом із поточним режимом показу та часом затримки буде збережено. Якщо ви віддасте цю команду одразу перед завершенням роботи \\*(We, ви зможете згодом запустити програму у тому самому стані."
#~ msgid "Some fields are fixed width and not scalable. As such, they are subject to truncation which would be indicated by a `+' in the last position."
#~ msgstr "Деякі поля мають фіксовану ширину і не придатні до масштабування. Такі поля програма обрізає і позначає їх символом «+» в останній позиції."
#~ msgid "You will be prompted for the amount to be added to the default widths shown above. Entering zero forces a return to those defaults."
#~ msgstr "Програма попросить вас вказати доповнення, яке буде додано до типової ширини з наведеної вище таблиці. Введення нульового значення призведе до повернення до типового значення."
#~ msgid "If you enter a negative number, \\*(We will automatically increase the column size as needed until there is no more truncated data. You can accelerate this process by reducing the delay interval or holding down the E<lt>SpaceE<gt> bar."
#~ msgstr "Якщо ви вкажете від'ємне значення, \\*(We автоматично збільшить розмір стовпчика на потрібну величину, так, щоб дані не було обрізано. Ви можете пришвидшити цей процес зменшенням інтервалу затримки або утриманням натиснутою клавіші E<lt>ПробілE<gt>."
#~ msgid "\\*(NT Whether explicitly or automatically increased, the widths for these fields are never decreased by \\*(We. To narrow them you must specify a smaller number or restore the defaults."
#~ msgstr "\\*(NT Буде ширину цих полів збільшено явно чи автоматично, \\*(We ніколи не зменшуватиме ширини. Щоб зменшити ширину, вам слід вказати менше число або відновити типові значення."
#~ msgid "After issuing the `Y' \\*(CI, you will be prompted for a target PID. Typing a value or accepting the default results in a separate screen. That screen can be used to view a variety of files or piped command output while the normal \\*(We iterative display is paused."
#~ msgstr "Після видання інтерактивної команди «Y» програма попросить вас ввести PID призначення. Введення значення або прийняття типового значення призведе до появи окремого екрана. Цим екраном можна буде скористатися для перегляду діапазону файлів або каналізованого виведення команд, а звичайний ітеративний показ даних \\*(We буде призупинено."
#~ msgid "\\*(NT This \\*(CI is only fully realized when supporting entries have been manually added to the end of the \\*(We \\*(CF. For details on creating those entries, \\*(Xt 6b. ADDING INSPECT Entries."
#~ msgstr "\\*(NT Цю інтерактивну команду повністю реалізовано лише при підтримці записів, які вручну додано наприкінці файла налаштувань \\*(We. Докладніше про створення цих записів можна дізнатися із розділу 6б. ДОДАВАННЯ ЗАПИСІВ ДЛЯ ІНСПЕКТУВАННЯ."
#~ msgid "Most of the keys used to navigate the Inspect feature are reflected in its header prologue. There are, however, additional keys available once you have selected a particular file or command. They are familiar to anyone who has used the pager `less' and are summarized here for future reference."
#~ msgstr "Більшість клавіш, які використовують для навігації інспектованими даними вказано у передмові. Втім, є додаткові клавіші, які стають доступними для певного файла або команди. Ці клавіші знайомі будь-кому, хто користувався програмою поділу на сторінки «less». Їхнє резюме наведено тут з довідковою метою."
#~ msgid "This key will take you to a separate screen where you can change the colors for the \\*(CW, or for all windows. For details regarding this \\*(CI \\*(Xt 4d. COLOR Mapping."
#~ msgstr "Натискання цієї клавіші переведе вас до окремого екрана, на якому ви зможете змінити кольори для «поточного» вікна або для усіх вікон. Докладніше про цю інтерактивну команду можна дізнатися з розділу 4г. ПРИВ'ЯЗКА КОЛЬОРІВ."
#~ msgid "The \\*(SA \\*(CIs areB< always available> in both \\*(FM and \\*(AM. They affect the beginning lines of your display and will determine the position of messages and prompts."
#~ msgstr "Інтерактивні команди області резюме є B<завжди доступними> уобох режимах — повноекранному та режимі альтернативного показу. Ці команди стосуються початкових рядків показу і визначають позицію повідомлень і запитів."
#~ msgid "These commands always impact just the \\*(CG. \\*(XT 5. ALTERNATE-DISPLAY Provisions and the `g' \\*(CI for insight into \\*(CWs and \\*(FGs."
#~ msgstr "Ці команди завжди впливають лише на «поточне» вікно або групу полів. Див. розділ 5. ПОЛОЖЕННЯ АЛЬТЕРНАТИВНОГО ПОКАЗУ та інтерактивну команду «g», щоб дізнатися більше про «поточні» вікна і групи полів."
#~ msgid "Toggle an informational message which is displayed whenever the message line is not otherwise being used. For additional information \\*(Xt 5c. SCROLLING a Window."
#~ msgstr "Перемкнути інформаційне повідомлення, яке буде показано кожного разу, коли рядок повідомлення не використовується в інший спосіб. Докладніше про це можна дізнатися з розділу 5в. ГОРТАННЯ ВІКНА."
#~ msgid "This is also the line containing the program name (possibly an alias) when operating in \\*(FM or the \\*(CW name when operating in \\*(AM."
#~ msgstr "Це також рядок, що містить назву програми (можливо альтернативу назви) при роботі у повноекранному режимі або назву «поточного» вікна при роботі у режимі альтернативного показу."
#~ msgid "This command affects from 2 to many \\*(SA lines, depending on the state of the `1', `2' or `3' \\*(CTs and whether or not \\*(We is running under true SMP."
#~ msgstr "Ця команда стосується від 2 багатьох рядків області резюме, залежно від стану перемикачів команд «1», «2» або «3» і того, чи працює \\*(We у режимі симетричної багатопроцесорності."
#~ msgid "This portion of the \\*(SA is also influenced by the `H' \\*(CI toggle, as reflected in the total label which shows either Tasks or Threads."
#~ msgstr "На цю частину області резюме впливає інтерактивна команда-перемикач «H», як це показано загальною міткою, яка показує завдання або потоки."
#~ msgid "When operating in either of the graphic modes, the display becomes much more meaningful when individual CPUs or NUMA nodes are also displayed. \\*(XC the `1', `2' and `3' commands below for additional information."
#~ msgstr "При роботі у будь-якому з графічних режимів показані дані стають набагато значимішими, якщо також показано окремі процесори або вузли NUMA. Щоб дізнатися більше, ознайомтеся із описом команд «1», «2» і «3» нижче."
#~ msgid "This command affects how the `t' command's Cpu States portion is shown. Although this toggle exists primarily to serve massively-parallel SMP machines, it is not restricted to solely SMP environments."
#~ msgstr "Ця команда впливає на те, як буде показано частину станів процесора для команди «t». Хоча основним призначенням цього перемикача є обслуговування комп'ютерів із значною паралелізацією у симетричній багатопроцесорності, його не обмежено лише середовищами із симетричною багатопроцесорністю."
#~ msgid "When you see `%Cpu(s):' in the \\*(SA, the `1' toggle is \\*O and all \\*(Pu information is gathered in a single line. Otherwise, each \\*(Pu is displayed separately as: `%Cpu0, %Cpu1, ...' up to available screen height."
#~ msgstr "Коли ви бачите «%CПроц:» в області резюме, перемикач «1» перебуває у стані \\*O, аусі дані щодо процесора буде зібрано в одному рядку. Якщо цього рядка немає, кожен процесор буде показано окремо, як «%Прц0, %Прц1, ...», аж до вичерпання доступної висоти екрана."
#~ msgid "This command toggles between the `1' command cpu summary display (only) or a summary display plus the cpu usage statistics for each NUMA Node. It is only available if a system has the requisite NUMA support."
#~ msgstr "Ця команда перемикає програму між режимом «1» показу резюме процесора (лише) або показом резюме разом із статистикою щодо використання процесора для кожного вузла NUMA. Вона доступна, лише якщо у системі є відповідна підтримка NUMA."
#~ msgid "You will be invited to enter a number representing a NUMA Node. Thereafter, a node summary plus the statistics for each cpu in that node will be shown until the `1', `2' or `4' \\*(CT is pressed. This \\*(CI is only available if a system has the requisite NUMA support."
#~ msgstr "Програма попросить вас ввести номер, який відповідає вузлу NUMA. Після введення буде показано резюме щодо вузла разом із статистикою для кожного процесора на вузлі, аж доки не буде натиснуто командний перемикач «1», «2» або «4». Доступ до цієї інтерактивної команди можна буде отримати, лише якщо у системі є відповідне підтримка NUMA."
#~ msgid "This command turns the `1' toggle \\*F for individual \\*(Pu display but prints the results two abreast. It requires a terminal with a minimum width of 80 columns. If a terminal's width is decreased below the minimum while \\*(We is running, \\*(We reverts to the normal `1' toggle \\*F state."
#~ msgstr "Ця команда вимикає перемикач «1» для показу окремого процесора, але виводити результати парами поруч. Це потребує термінала із мінімальною шириною у 80 позицій. Якщо ширину термінала стане меншою під час роботи \\*(We, \\*(We поверне звичайний вимкнений стан перемикача «1»."
#~ msgid "To avoid truncation when displaying detailed \\*(Pu statistcs, as opposed to the graphic representations, a minimum width of 165 columns would be required."
#~ msgstr "Щоб уникнути обрізання при показі докладних статистичних даних процесорів, у протилежність до графічних представлень, знадобиться мінімальна ширина у 165 позицій."
#~ msgid "This \\*(CT is intended for massively parallel SMP environments where, even with the `4' \\*(CT, not all processors can be displayed. With each press of `!' the number of additional \\*(Pu's combined is doubled thus reducing the total number of \\*(Pu lines displayed."
#~ msgstr "Цю команду-перемикач призначено для середовищ із потужною паралельною симетричною багатопроцесорністю, де, навіть із командою-перемикачем «4», може бути показано лише частину процесорів. Із кожним натисканням «!» кількість додаткових поєднаних процесорів подвоюватиметься, таким чином зменшуючи загальну кількість показаних рядків процесорів."
#~ msgid "For example, with the first press of `!' one additional \\*(Pu will be combined and displayed as `0-1, 2-3, ...' instead of the normal `%Cpu0, %Cpu1, %Cpu2, %Cpu3, ...'. With a second `!' \\*(CT two additional \\*(Pus are combined and shown as `0-2, 3-5, ...'. Then the third '!' press, combining four additional \\*(Pus, shows as `0-4, 5-9, ...', etc."
#~ msgstr "Наприклад, після першого натискання «!» один додатковий процесор буде поєднано і показано як «0-1, 2-3, ...» замість звичайного «%Прц0, %Прц1, %Прц2, %Прц3, ...». Після другого натискання команди-перемикача «!» буде поєднано два додаткових процесори і показано дані як «0-2, 3-5, ...». Далі, третє натискання «!» поєднає чотири додаткових процесори, покаже «0-4, 5-9, ...» тощо."
#~ msgid "Such progression continues until individual \\*(Pus are again displayed and impacts both the `1' and `4' toggles (one or two columns). Use the `=' command to exit B<Combine Cpus> mode."
#~ msgstr "Поєднання триватиме, аж доки програма не повернеться до показу окремих процесорів, і стосуватиметься обох перемикачів, «1» і «4» (одного або двох стовпчиків). Скористайтеся командою «=», щоб вийти з режиму B<поєднання процесорів>."
#~ msgid "\\*(NT If the entire \\*(SA has been toggled \\*F for any window, you would be left with just theB< message line>. In that way, you will have maximized available task rows but (temporarily) sacrificed the program name in \\*(FM or the \\*(CW name when in \\*(AM."
#~ msgstr "\\*(NT Якщо усі область резюме було вимкнено для якогось з вікон, ви зможете бачити лише B<рядок повідомлень>. У такому режимі ви бачитимете максимум доступних рядків завдань, але (тимчасово) не побачите назви програми у повноекранному режимі або назви «поточного» вікна у режимі альтернативного показу."
#~ msgid "The \\*(TA \\*(CIs areB< never available> in \\*(AMI< if> the \\*(CW's \\*(TD has been toggled \\*F (\\*(Xt 5. ALTERNATE-DISPLAY Provisions)."
#~ msgstr "Інтерактивні команди області завдань B<ніколи не доступні> у режимі альтернативного показу, якщо показ завдань «поточного» вікна \\*F (див. розділ 5. ПОЛОЖЕННЯ АЛЬТЕРНАТИВНОГО ПОКАЗУ)."
#~ msgid "Alternates between right-justified (the default) and left-justified numeric data. If the numeric data completely fills the available column, this \\*(CT may impact the column header only."
#~ msgstr "Перемикає між вирівнюванням праворуч (типовий режим) та вирівнюванням ліворуч числових даних. Якщо числові дані повністю заповнюють доступний у стовпчику простір, цей командний перемикач стосуватиметься лише заголовка стовпчика."
#~ msgid "Alternates between left-justified (the default) and right-justified character data. If the character data completely fills the available column, this \\*(CT may impact the column header only."
#~ msgstr "Перемикає між вирівнюванням ліворуч (типовий режим) та вирівнюванням праворуч символьних даних. Якщо символьні дані повністю заповнюють доступний у стовпчику простір, цей командний перемикач стосуватиметься лише заголовка стовпчика."
#~ msgid "This command will impact how the `x' and `y' toggles are displayed. It may also impact the \\*(SA when a bar graph has been selected for \\*(Pu states or memory usage via the `t' or `m' toggles."
#~ msgstr "Ця команда впливає на те, як буде показано перемикачі «x» та «y». Вона також може вплинути на область резюме, якщо для станів процесора або використання пам'яті було вибрано стовпчикову діаграму за допомогою перемикача «t» або «m»."
#~ msgid "\\*(NT Whenever Searching and/or Other Filtering is active in a window, column highlighting is temporarily disabled. \\*(XC notes at the end of topics 5d. SEARCHING and 5e. FILTERING for an explanation why."
#~ msgstr "\\*(NT Якщо у вікні увімкнено пошук і/або інше фільтрування, підсвічування стовпчиків буде тимчасово вимкнено. Див. нотатки наприкінці розділів 5г. ПОШУК і 5д. ФІЛЬТРУВАННЯ, якщо вам потрібні пояснення."
#~ msgid "Changes highlighting for \"running\" tasks. For additional insight into this task state, \\*(Xt 3a. DESCRIPTIONS of Fields, the `S' field (Process Status)."
#~ msgstr "Змінює підсвічування для «запущених» завдань. Щоб дізнатися більше про цей стан завдань, див. розділ 3а. ОПИСИ ПОЛІВ, поле «S» (стан процесів)."
#~ msgid "Use of this provision provides important insight into your system's health. The only costs will be a few additional tty escape sequences."
#~ msgstr "Використання цього перемикача надає важливі дані щодо стану вашої системи. Єдиною платою за це є декілька додаткових екранованих послідовностей у терміналі."
#~ msgid "Switches the \\*(CW between your last used color scheme and the older form of black-on-white or white-on-black. This command will alterB< both> the \\*(SA and \\*(TA but does not affect the state of the `x', `y' or `b' toggles."
#~ msgstr "Перемикає «поточне» вікно між вашою останньою використаною схемою кольорів та старою формою чорного тексту на білому тлі або білого тексту на чорному тлі. Ця команда стосується B<одрдазу> області резюме і області завдань, але не впливає на стан перемикачів «x», «y» та «b»."
#~ msgid "This command will be honored whether or not the COMMAND column is currently visible. Later, should that field come into view, the change you applied will be seen."
#~ msgstr "Цю команду буде враховано незалежно від того, чи є стовпчик COMMAND видимим. Пізніше, якщо це поле стане видимим, ви зможете побачити наслідки внесених змін."
#~ msgid "These keys display a separate screen where you can change which fields are displayed, their order and also designate the sort field. For additional information on these \\*(CIs \\*(Xt 3b. MANAGING Fields."
#~ msgstr "Натискання цих клавіш призведе до показу окремого екрана, на якому ви зможете змінити перелік показаних полів, їхній порядок та вказати поле для упорядковування. Докладніші відомості щодо цих інтерактивних команд можна знайти у розділі 3б. КЕРУВАННЯ ПОЛЯМИ."
#~ msgid "You will be prompted for the selection criteria which then determines which tasks will be shown in the \\*(CW. Your criteria can be made case sensitive or case can be ignored. And you determine if \\*(We should include or exclude matching tasks."
#~ msgstr "Програма попросить вас вибрати критерій, який визначить, які завдання буде показано у «поточному» вікні. У вашому критерії можна враховувати регістр символів або не враховувати регістр символів. Ви також можете визначити, має \\*(We включати чи виключати відповідні завдання."
#~ msgid "When Cumulative mode is \\*O, each process is listed with the \\*(Pu time that it and its dead children have used."
#~ msgstr "Якщо режим накопиченого часу увімкнено, кожен процес буде показано із часом центрального процесора, який використано самим процесом і усіма його завершеними дочірніми процесами."
#~ msgid "When \\*F, programs that fork into many separate tasks will appear less demanding. For programs like `init' or a shell this is appropriate but for others, like compilers, perhaps not. Experiment with two \\*(TWs sharing the same sort field but with different `S' states and see which representation you prefer."
#~ msgstr "Якщо \\*F, програми, які розгалужуються на багато окремих завдань здаватимуться менш вимогливими. Для програм, подібних до «init» або командної оболонки, це є прийнятним, але для інших програм, подібних до компіляторів, ймовірно, ні. Спробуйте поекспериментувати з двома вікнами завдань із однаковим полем упорядковування, але різними станами «S» і виберіть потрібне вам представлення."
#~ msgid "After issuing this command, you'll be informed of the new state of this toggle. If you wish to know in advance whether or not Cumulative mode is in effect, simply ask for help and view the window summary on the second line."
#~ msgstr "Після того, як буде віддано цю команду, програма проінформує вас щодо нового стану цього перемикача. Якщо вам потрібно знати, чи задіяно накопичувальний режим, просто віддайте команду показу довідки і зверніть увагу на другий рядок у резюме вікна."
#~ msgid "You will be prompted for theB< uid> orB< name> of the user to display. The -u option matches on B< effective> user whereas the -U option matches onB< any> user (real, effective, saved, or filesystem)."
#~ msgstr "Програма попросить вас ввести B<uid> або B<ім'я> користувача, дані якого слід показати. Показати лише процеси із вказаним ідентифікатором користувача або іменем користувача Параметр «-u» стосується B<ефективного> користувача, а параметр «-U» стосується I<будь-якого> користувача (справжнього, ефективного, збереженого або користувача файлової системи)."
#~ msgid "Thereafter, in that \\*(TW only matching users will be shown, or possibly no processes will be shown. Prepending an exclamation point (`!') to the user id or name instructs \\*(We to display only processes with users not matching the one provided."
#~ msgstr "З цього моменту у цьому вікні завдань буде показано далі лише відповідних користувачів або взагалі не буде показано процесів. Додавання знаку оклику («!») до ідентифікатора користувача або імені наказує \\*(We показати лише процеси користувачів, які не збігаються із вказаним."
#~ msgid "Different \\*(TWs can be used to filter different users. Later, if you wish to monitor all users again in the \\*(CW, re-issue this command but just press E<lt>EnterE<gt> at the prompt."
#~ msgstr "Для фільтрування даних за різними користувачами можна скористатися різними вікнами завдань. Пізніше, якщо ви захочете знову побачити дані спостереження за усіма користувачами у «поточному» вікні, знову віддайте цю команду, але просто натисніть E<lt>EnterE<gt> у відповідь на запит."
#~ msgid "In this mode, processes are reordered according to their parents and the layout of the COMMAND column resembles that of a tree. In forest view mode it is still possible to toggle between program name and command line (\\*(Xc `c' \\*(CI) or between processes and threads (\\*(Xc `H' \\*(CI)."
#~ msgstr "У цьому режимі процеси буде переупорядковано за їхніми батьківськими процесами, а компонування стовпчика COMMAND нагадуватиме дерево. У режимі перегляду лісу можна буде перемикатися між показом назви програми і рядка команди (див. інтерактивну команду «c») або між показом процесів і гілок (див. інтерактивну команду «H»)."
#~ msgid "\\*(NT Typing any key affecting the sort order will exit forest view mode in the \\*(CW. \\*(XT 4c. TASK AREA Commands, SORTING for information on those keys."
#~ msgstr "\\*(NT Натискання будь-якої клавіші, яка впливає на порядок сортування, призведе до виходу з режиму перегляду лісу у «поточному» вікні. Див. 4в. КОМАНДИ ОБЛАСТІ ЗАВДАНЬ, УПОРЯДКОВУВАННЯ, щоб дізнатися більше про ці клавіші."
#~ msgid "The toggle is applied against the first (topmost) process in the \\*(CW. \\*(XT 5c. SCROLLING a Window for additional information regarding vertical scrolling."
#~ msgstr "Перемикач буде застосовано до першого (найвищого у списку) процесу у «поточному» вікні. Див. 5в. ГОРТАННЯ ВІКНА, щоб дізнатися більше про вертикальне гортання."
#~ msgid "If the target process has not forked any children, this key has no effect. It also has no effect when not in forest view mode."
#~ msgstr "Якщо від цільового процесу не було відгалужено жодних дочірніх, ця клавіша ні на що не вплине. Також вона не працює у режимах, відмінних від режиму показу лісу."
#~ msgid "Displays all tasks or just active tasks. When this toggle is \\*F, tasks that have not used any \\*(PU since the last update will not be displayed. However, due to the granularity of the %CPU and TIME+ fields, some processes may still be displayed thatI< appear> to have usedI< no> \\*(PU."
#~ msgstr "Перемикає програму між показом усіх завдань або лише активних завдань. Якщо цей перемикач \\*F, завдання, які не використовували жодного процесора з моменту останнього оновлення, не буде показано. Втім, через деталізацію полів %CPU і TIME+, програма може показувати пункти деяких процесів, які, як може I<здатися>, I<не> використовують процесор."
#~ msgid "If this command is applied to the last \\*(TD when in \\*(AM, then it will not affect the window's size, as all prior \\*(TDs will have already been painted."
#~ msgstr "Якщо цю команду застосовано до останнього показу команд у режимі альтернативного показу, вона не впливатиме на розмір вікна, оскільки усі попередні покази команд уже буде намальовано."
#~ msgid "You will be prompted to enter the number of tasks to display. The lessor of your number and available screen rows will be used."
#~ msgstr "Програма попросить вас ввести кількість завдань, які слід показати. Буде використано менше зі значень — вказаного вами числа і доступної кількості рядків на екрані."
#~ msgid "When used in \\*(AM, this is the command that gives you precise control over the size of each currently visible \\*(TD, except for the very last. It will not affect the last window's size, as all prior \\*(TDs will have already been painted."
#~ msgstr "Якщо команду використано у режимі альтернативного показу, вона надасть вам можливість точно визначити розмір кожної із видимих панелей показу завдань, окрім останньої. Вона не впливає на розмір останнього вікна, оскільки усі попередні панелі показу завдань вже буде намальовано."
#~ msgid "\\*(NT If you wish to increase the size of the last visible \\*(TD when in \\*(AM, simply decrease the size of the \\*(TD(s) above it."
#~ msgstr "\\*(NT Якщо вам потрібно збільшити розмір останньої видимої панелі показу завдань у режимі альтернативного показу, просто зменшіть розмір панелей показу завдань над нею."
#~ msgid "For compatibility, this \\*(We supports most of the former \\*(We sort keys. Since this is primarily a service to former \\*(We users, these commands do not appear on any help screen."
#~ msgstr "З метою забезпечення сумісності у цій версії \\*(We передбачено підтримку усіх клавіш упорядковування, які було реалізовано у попередніх версіях \\*(We. Оскільки ці клавіші призначено, в основному, для давніх користувачів \\*(We, відповідні команди не описано на жодному з екранів довідки."
#~ msgid "Before using any of the following sort provisions, \\*(We suggests that you temporarily turn on column highlighting using the `x' \\*(CI. That will help ensure that the actual sort environment matches your intent."
#~ msgstr "Перш ніж користуватися будь-якими із вказаних нижче варіантів упорядковування, \\*(We запропонує вам тимчасово увімкнути підсвічування стовпчиків за допомогою інтерактивної команди «x». Це допоможе вам переконатися, що справжнє середовище упорядковування відповідає вашим очікуванням."
#~ msgid "These keys display a separate screen where you can change which field is used as the sort column, among other functions. This can be a convenient way to simply verify the current sort field, when running \\*(We with column highlighting turned \\*F."
#~ msgstr "За допомогою цих клавіш можна відкрити окремий екран, за допомогою якого, окрім іншого, ви можете змінити, яке з полів буде використано для упорядковування. Це може бути зручним способом перевірити, яке з полів є полем для упорядковування, якщо \\*(We було запущено із вимкненим підсвічуванням стовпчиків."
#~ msgid "\\*(NT Field sorting uses internal values, not those in column display. Thus, the TTY and WCHAN fields will violate strict ASCII collating sequence."
#~ msgstr "\\*(NT При упорядковування за полями буде використано внутрішні значення, а не ті, які показано у стовпчику. Через це, у полях TTY і WCHAN буде порушено строку послідовність упорядковування ASCII."
#~ msgid "When you issue the `Z' \\*(CI, you will be presented with a separate screen. That screen can be used to change the colors in just the \\*(CW or in all four windows before returning to the \\*(We display."
#~ msgstr "Якщо ви віддасте інтерактивну команду «Z», програма покаже вам окремий екран. Цим екраном можна скористатися для зміни кольорів лише у «поточному» вікні або в усіх чотирьох вікнах перед поверненням до показу даних \\*(We."
#~ msgid "If you use `a' or `w' to cycle the targeted window, you will have applied the color scheme that was displayed when you left that window. You can, of course, easily return to any window and reapply different colors or turn colors \\*F completely with the `z' toggle."
#~ msgstr "Якщо ви скористаєтеся «a» або «w» для циклічного переходу вікном призначення, ви матимете застосовану схему кольорів, яку було показано, коли ви полишите це вікно. Ви можете, звичайно, без проблем повернутися до будь-якого вікна і повторно застосувати різні кольори або повністю вимкнути кольори за допомогою перемикача «z»."
#~ msgid "The Color Mapping screen can also be used to change the \\*(CG in either \\*(FM or \\*(AM. Whatever was targeted when `q' or E<lt>EnterE<gt> was pressed will be made current as you return to the \\*(We display."
#~ msgstr "Крім того, екраном прив'язки кольорів можна скористатися для зміни «поточного» вікна або групи полів у повноекранному режимі або режимі альтернативного показу. Щоб не було ціллю при натисканні «q» або E<lt>EnterE<gt>, його буде зроблено поточним, коли ви повернетеся до показу даних \\*(We."
#~ msgid "In \\*(FM there is a single window represented by the entire screen. That single window can still be changed to display 1 of 4 differentB< field groups> (\\*(Xc `g' \\*(CI, repeated below). Each of the 4 \\*(FGs has a unique separately configurableB< \\*(SA > and its own configurableB< \\*(TA>."
#~ msgstr "У повноекранному режимі програма показуватиме єдине вікно, яке заповнюватиме увесь екран. У цьому єдиному вікні усе ще можна показ на демонстрацію даних однієї з 4 різних B<груп полів> (див. інтерактивну команду «g», повторену нижче). Кожна з 4 груп полів має унікальну окремо налаштовувану B<область резюме> і власну налаштовувану B<область завдань>."
#~ msgid "The \\*(SA will always exist, even if it's only the message line. At any given time onlyI< one> \\*(SA can be displayed. However, depending on your commands, there could be fromI< zero > toI< four> separate \\*(TDs currently showing on the screen."
#~ msgstr "Область резюме існуватиме завжди, навіть якщо це просто рядок повідомлення. У будь-який конкретний момент може бути показано лише I<одну> \\*(SA. Втім, залежно від ваших команд, може бути від I<нуля> до I<чотирьох> окремих панелей показу завдань одночасно показаних на екрані."
#~ msgid "The \\*(CW is the window associated with the \\*(SA and the window to which task related commands are always directed. Since in \\*(AM you can toggle the \\*(TD \\*F, some commands might be restricted for the \\*(CW."
#~ msgstr "«Поточне» вікно є вікном, яке пов'язано із областю резюме, і вікном, до якого завжди буде спрямовано усі пов'язані із завданням команди. Оскільки у режимі альтернативного показу ви можете перемкнути показ завдань у стан \\*F, деякі команди може бути обмежено для «поточного» вікна."
#~ msgid "A further complication arises when you have toggled the first \\*(SA line \\*F. With the loss of the window name (the `l' toggled line), you'll not easily know what window is the \\*(CW."
#~ msgstr "Усе стає складнішим, якщо ви вимкнете перший рядок області резюме. Із втратою назви вікна (рядка, перемкнутого «l»), вам не просто буде визначити, яке з вікон є «поточним»."
#~ msgid "The `-' key turns the \\*(CW's \\*(TD \\*O and \\*F. When \\*O, that \\*(TA will show a minimum of the columns header you've established with the `f' \\*(CI. It will also reflect any other \\*(TA options/toggles you've applied yielding zero or more tasks."
#~ msgstr "Клавіша «-» вмикає або вимикає показ завдань «поточного» вікна. У стані \\*O в області завдань буде показано мінімум заголовка стовпчиків, які встановлено вами за допомогою інтерактивної команди «f». У ній також буде відтворено будь-які інші параметри або перемикачі області завдань, які було застосовано вами з метою отримання даних нуля або більшої кількості завдань."
#~ msgid "The `_' key does the same for all \\*(TDs. In other words, it switches between the currently visible \\*(TD(s) and any \\*(TD(s) you had toggled \\*F. If all 4 \\*(TDs are currently visible, this \\*(CI will leave the \\*(SA as the only display element."
#~ msgstr "Клавіша «_» виконує те саме завдання для усіх показів завдань. Іншими словами, ця клавіша перемикає програму між поточними видимими показами завдань і будь-якими показами завдань, які ви перевели у стан \\*F. Якщо поточними видимими є усі 4 покази завдань, ця інтерактивна команда лишить область резюме єдиним показаним елементом."
#~ msgid "The `=' key forces the \\*(CW's \\*(TD to be visible. It also reverses any active `i' (idle tasks), `n' (max tasks), `u/U' (user filter), `o/O' (other filter), `v' (hide children), `L' (locate) and `!' (combine cpus) commands. Also, if the window had been scrolled, it will be reset with this command. \\*(XT 5c. SCROLLING a Window for additional information regarding vertical and horizontal scrolling."
#~ msgstr "Використання клавіші «=» примусово встановлює стан видимості для показу завдань «поточного» вікна Вона також обертає усі активні перемикачі «i» (бездіяльні завдання), «n» (максимум завдань), «u/U» (фільтр за користувачем), «o/O» (інший фільтр), «v» (приховати дочірні), «L» (пошук) і «!» (поєднати дані для процесорів). Також, якщо у вікні було виконано гортання, його буде скинуто цією командою. Див. 5в. ГОРТАННЯ ВІКНА, щоб дізнатися більше про вертикальне і горизонтальне гортання."
#~ msgid "The `+' key does the same for all windows. The four \\*(TDs will reappear, evenly balanced, while retaining any customizations previously applied beyond those noted for the `=' \\*(CT."
#~ msgstr "Клавіша «+» робить те саме для усіх вікон. Повторно з'являться усі чотири покази завдань, рівномірно розподілені за розміром, із одночасним збереженням усіх налаштувань, які було застосовано додатково до тих, які описано для команди-перемикача «=»."
#~ msgid "The first time you issue this command, all four \\*(TDs will be shown. Thereafter when you switch modes, you will see only the \\*(TD(s) you've chosen to make visible."
#~ msgstr "Коли ви перший раз віддасте цю команду, буде показано усі чотири показу завдань. Надалі, коли ви перемикатимете режими, ви бачитимете лише ті покази завдань, які ви визначили як видимі."
#~ msgid "This will change the \\*(CW, which in turn changes the window to which commands are directed. These keys act in a circular fashion so you can reach any desired window using either key."
#~ msgstr "Ці команди змінюють «поточне» вікно, що, у свій час, змінює вікно, до якого буде спрямовано команди. Ці клавіші працюють циклічним чином, тому ви можете дістатися будь-якого бажаного вікна за допомогою будь-якої з клавіш."
#~ msgid "Assuming the window name is visible (you have not toggled `l' \\*F), whenever the \\*(CW name loses its emphasis/color, that's a reminder the \\*(TD is \\*F and many commands will be restricted."
#~ msgstr "Якщо назву вікно показано (вами не перемкнуто «l» у стан \\*F), коли назва «поточного» вікна втрачає акцент/колір, назва буде нагадуванням про те, що показ завдань \\*F, а багато команд буде обмежено."
#~ msgid "In \\*(FM, this command is necessary to alter the \\*(CW. In \\*(AM, it is simply a less convenient alternative to the `a' and `w' commands."
#~ msgstr "У повноекранному режимі ця команда потрібна для зміни «поточного» вікна. У режимі альтернативного перегляду це просто менш зручна альтернатива командам «a» і «w»."
#~ msgid "You will be prompted for a new name to be applied to the \\*(CW. It does not require that the window name be visible (the `l' toggle to be \\*O)."
#~ msgstr "Програма попросить вас ввести нову назву, яку буде застосовано до «поточного» вікна. Потреби у видимості назви вікна немає (перемикач «l» може не перебувати у стані \\*O)."
#~ msgid "Typically a \\*(TW is a partial view into a systems's total tasks/threads which shows only some of the available fields/columns. With these \\*(KSs, you can move that view vertically or horizontally to reveal any desired task or column."
#~ msgstr "Типово, вікно завдань є частковим переглядом загальних даних щодо завдань/потоків системи, де буде показано лише деякі з доступних полів/стовпчиків. За допомогою цих клавіш гортання ви можете пересувати перегляд вертикально або горизонтально, щоб дістатися будь-якого бажаного завдання або стовпчика."
#~ msgid "Move the view up toward the first task row, until the first task is displayed at the top of the \\*(CW. The I<Up> \\*(KA moves a single line while I<PgUp> scrolls the entire window."
#~ msgstr "Пересунути перегляд вгору у напрямку першого рядка завдань, аж доки моменту, коли пункт першого завдання буде показано у верхній позиції «поточного» вікна. Клавіша зі стрілкою I<вгору> пересуває перегляд на один рядок, а клавіша I<PgUp> гортає на ціле вікно."
#~ msgid "Move the view down toward the last task row, until the last task is the only task displayed at the top of the \\*(CW. The I<Down> \\*(KA moves a single line while I<PgDn> scrolls the entire window."
#~ msgstr "Пересунути перегляд вниз у напрямку останнього рядка завдань, аж доки моменту, коли пункт останнього завдання буде показано єдиним у верхній позиції «поточного» вікна. Клавіша зі стрілкою I<вниз> пересуває перегляд на один рядок, а клавіша I<PgDn> гортає на ціле вікно."
#~ msgid "\\*(NT As a reminder, some fields/columns are not fixed-width but allocated all remaining screen width when visible. When scrolling right or left, that feature may produce some unexpected results initially."
#~ msgstr "\\*(NT Як нагадування, деякі поля/стовпчики мають не фіксовану ширину, а займають решту ширини екрана, якщо їх показано. При гортанні праворуч або ліворуч на першому кроці ця команда може давати не ті результати, на які ви очікували."
#~ msgid "Additionally, there are special provisions for any variable width field when positioned as the last displayed field. Once that field is reached via the right arrow key, and is thus the only column shown, you can continue scrolling horizontally within such a field. \\*(XC `C' \\*(CI below for additional information."
#~ msgstr "Крім того, є певні правила для будь-якого поля змінної ширини, яке розташовано у останньому показаному полі. Щойно ви досягнете останнього поля за допомогою стрілки праворуч, і отже, стане єдиним показаним стовпчиком, ви можете продовжити гортання усередині такого поля. Щоб дізнатися більше, див. інтерактивну команду «C» нижче."
#~ msgid "Reposition the display so that the rightmost column reflects the last displayable field and the bottom task row represents the last task."
#~ msgstr "Змінити розташування області показу так, щоб у найправішому стовпчику було показано дані останнього придатного до показу поля, а нижній рядок завдання відповідав останньому завданню."
#~ msgid "\\*(NT From this position it is still possible to scrollI< down> andI< right> using the \\*(KAs. This is true until a single column and a single task is left as the only display element."
#~ msgstr "\\*(NT З цієї позиції можна гортати I<вниз> і I<праворуч> за допомогою клавіш зі стрілками. Це твердження лишається правильним, аж доки в області перегляду не лишиться єдиного стовпчика і єдиного завдання."
#~ msgid "Toggle an informational message which is displayed whenever the message line is not otherwise being used. That message will take one of two forms depending on whether or not a variable width column has also been scrolled."
#~ msgstr "Перемкнути інформаційне повідомлення, яке буде показано, якщо рядок повідомлення не використано іншим чином. Це повідомлення має одну з двох форм. Форма залежить від того, чи було виконано гортання у стовпчику змінної ширини."
#~ msgid "The coordinates shown as B<n>/B<n> are relative to the upper left corner of the \\*(CW. The additional `B<+\\ nn>' represents the displacement into a variable width column when it has been scrolled horizontally. Such displacement occurs in normal 8 character tab stop amounts via the right and left arrow keys."
#~ msgstr "Координати буде показано у форматі B<n>/B<n> відносно верхнього лівого кута «поточного» вікна. Додаткове «B<+\\ nn>» відтворюватиме зміщення у стовпчику змінної ширини при гортанні його вмісту у горизонтальному напрямку. Такі зміщення розташовуються у звичайних позиціях 8-символьної табуляції при пересуванні за допомогою клавіш зі стрілками праворуч і ліворуч."
#~ msgid "The first B<n> represents the topmost visible task and is controlled by \\*(KSs. The second B<n> is updated automatically to reflect total tasks."
#~ msgstr "Перше B<n> відповідає верхньому видимому завданню, ним керують клавіші гортання. Друге B<n> оновлюється автоматично і відповідає загальній кількості завдань."
#~ msgid "The first B<n> represents the leftmost displayed column and is controlled by \\*(KSs. The second B<n> is the total number of displayable fields and is established with the `B<f>' \\*(CI."
#~ msgstr "Перше B<n> відповідає найлівішому показаному стовпчику, ним керують клавіші гортання. Друге B<n> є загальною кількістю полів, які може бути показано, його значення визначає інтерактивна команда «B<f>»."
#~ msgid "The above \\*(CIs areB< always> available in \\*(FM butB< never> available in \\*(AM if the \\*(CW's \\*(TD has been toggled \\*F."
#~ msgstr "Наведені вище інтерактивні команди доступні B<завжди> у повноекранному режимі, але B<ніколи> не доступні у режимі альтернативного показу, якщо показ завдань «поточного» вікна \\*F."
#~ msgid "\\*(NT When any form of filtering is active, you can expect some slight aberrations when scrolling since not all tasks will be visible. This is particularly apparent when using the Up/Down \\*(KAs."
#~ msgstr "\\*(NT Якщо активним є фільтрування у будь-якій формі, можна очікувати певні помилки під час гортання, оскільки не усі завдання будуть видимими. Це, зокрема, особливо помітно при використанні клавіш зі стрілками вгору/вниз."
#~ msgid "You will be prompted for the case-sensitive string to locate starting from the current window coordinates. There are no restrictions on search string content."
#~ msgstr "Програма попросить вас ввести рядок без врахування регістру символів для пошуку, починаючи з координат поточного вікна. Обмежень на вміст рядка пошуку не передбачено."
#~ msgid "Searches are not limited to values from a single field or column. All of the values displayed in a task row are allowed in a search string. You may include spaces, numbers, symbols and even forest view artwork."
#~ msgstr "Пошук не обмежено значеннями з єдиного поля або стовпчика. У рядку пошуку можна використовувати усі значення, які показано у рядку завдання. До рядка пошуку можна включати пробіли, цифри, символи і навіть графічні символи перегляду лісу."
#~ msgid "Keying E<lt>EnterE<gt> with no input will effectively disable the `&' key until a new search string is entered."
#~ msgstr "Натискання клавіші E<lt>EnterE<gt> без введених даних призведе до вимикання перемикача «&», аж доки не буде введено нового рядка для пошуку."
#~ msgid "When a match is found, the current window is repositioned vertically so the task row containing that string is first. The scroll coordinates message can provide confirmation of such vertical repositioning (\\*(Xc `C' \\*(CI). Horizontal scrolling, however, is never altered via searching."
#~ msgstr "Якщо буде знайдено відповідник, поточне вікно буде переміщено вертикально так, щоб рядок завдання, який містить знайдений відповідник, став першим. У повідомленні координат гортання може бути показано підтвердження такого вертикального переміщення (див. інтерактивну команду «C»). Втім, горизонтальна позиція гортання під час пошуку ніколи не змінюється."
#~ msgid "If a search fails, restoring the \\*(CW home (unscrolled) position, scrolling horizontally, displaying command-lines or choosing a more stable sort field could yet produce a successful `&' search."
#~ msgstr "Якщо пошуки завершаться невдачею, відновлення початкової позиції (без гортання) у «поточному» вікні, горизонтальне гортання, показ командних рядків або вибір стабільнішого поля гортання може зробити пошук «&» успішним."
#~ msgid "\\*(NT Whenever a Search is active in a window, \\*(We will turn column highlighting \\*F to prevent false matches on internal non-display escape sequences. Such highlighting will be restored when a window's search string is empty. \\*(XC `x' \\*(CI for additional information on sort column highlighting."
#~ msgstr "\\*(NT Задіяння пошуку у вікні призведе до того, що \\*(We вимикатиме підсвічування стовпчика, щоб запобігти помилковому виявленню відповідників у внутрішніх непоказаних керівних послідовностях. Таке підсвічування буде відновлено, коли рядок пошуку у вікні стане порожнім. Див. інтерактивну команду «x», щоб дізнатися більше про підсвічування стовпчика упорядковування."
#~ msgid "You can use this `Other Filter' feature to establish selection criteria which will then determine which tasks are shown in the \\*(CW. Such filters can be made presistent if preserved in the rcfile via the 'W' \\*(CI."
#~ msgstr "Ви можете скористатися цією можливістю іншого фільтра, щоб встановити критерій вибору, який визначить, які завдання буде показано у «поточному» вікні. Такі фільтри можна зробити сталими, якщо зберегти їх до файла rcfile за допомогою інтерактивної команди «W»."
#~ msgid "Establishing a filter requires: 1) a field name; 2) an operator; and 3) a selection value, as a minimum. This is the most complex of \\*(We's user input requirements so, when you make a mistake, command recall will be your friend. Remember the Up/Down \\*(KAs or their aliases when prompted for input."
#~ msgstr "Встановлення фільтра мінімально потребує: 1) назви поля; 2) оператора та 3) значення вибору. Це найскладніші вимоги щодо введених користувачем даних у \\*(We. Тому, якщо ви зробили помилку, вам допоможе пам'ять команд. Пам'ятайте про клавіші зі стрілками вгору/вниз або їхні альтернативи при запитах на введення даних."
#~ msgid "If a field is not turned on or is not currently in view, then your selection criteria will not affect the display. Later, should a filtered field become visible, the selection criteria will then be applied."
#~ msgstr "Якщо поле не увімкнено абоу поточний момент не показано, ваші критерії вибору не впливатимуть на показ. Пізніше, якщо фільтроване поле стане видимим, критерії вибору буде застосовано."
#~ msgid "This can serve as a reminder of which filters are active in the \\*(CW. A summary will be shown on the message line until you press the E<lt>EnterE<gt> key."
#~ msgstr "За допомогою цієї команди можна згадати, які фільтри є активними у «поточному» вікні. Резюме буде показано у рядку повідомлення аж до натискання клавіші E<lt>EnterE<gt>."
#~ msgid "This clears all of your selection criteria in the \\*(CW. It also has additional impact so please \\*(Xt 4a. GLOBAL Commands."
#~ msgstr "Ця команда знімає усі ваші критерії вибору у «поточному» вікні. Також має додатковий вплив на показу, тому, будь ласка, ознайомтеся з розділом 4а. ЗАГАЛЬНІ КОМАНДИ."
#~ msgid "This clears the selection criteria in all windows, assuming you are in \\*(AM. As with the `=' \\*(CI, it too has additional consequences so you might wish to \\*(Xt 5b. COMMANDS for Windows."
#~ msgstr "Ця команда вилучає усі критерії вибору в усіх вікнах, якщо ви працюєте у режимі альтернативного показу. Так само, як із інтерактивною командою «=», її застосування призводить до додаткових наслідків, тому варто ознайомитися із розділом 5б. КОМАНДИ ДЛЯ ВІКОН."
#~ msgid "When prompted for selection criteria, the data you provide must take one of two forms. There are 3 required pieces of information, with a 4th as optional. These examples use spaces for clarity but your input generally would not."
#~ msgstr "У відповідь на запит щодо критерії вибору вам слід вказати дані в одній з двох форм. Передбачено 3 обов'язкових елементів даних і четвертий додатковий. У наведених прикладах пробіли використано для зручності читання, але, загалом, їх можна і не використовувати."
#~ msgid "Items #1, #3 and #4 should be self-explanatory. Item B<#2> represents both a required I<delimiter> and the I<operator> which must be one of either equality (`=') or relation (`E<lt>' or `E<gt>')."
#~ msgstr "Пункти #1, #3 і #4 неважко зрозуміти і без пояснень. Пункт B<#2> є одразу і обов'язковим I<роздільником>, і I<оператором>, яким є одне зі значень: рівність («=») або відношення («E<lt>» або «E<gt>»)."
#~ msgid "The `=' equality operator requires only a partial match and that can reduce your `if-value' input requirements. The `E<gt>' or `E<lt>' relational operators always employ string comparisons, even with numeric fields. They are designed to work with a field's default I<justification> and with homogeneous data. When some field's numeric amounts have been subjected to I<scaling> while others have not, that data is no longer homogeneous."
#~ msgstr "Оператор рівності «=» потребує лише часткової відповідності і це може зменшити вимоги щодо вхідних даних для «значення». Для операторів відношення «E<gt>» або «E<lt>» буде використано порівняння рядків, навіть для числових полів. Їх розроблено для роботи з типовим I<вирівнюванням> полів і однорідними даними. Якщо деякі числові дані у певному полі I<масштабовано>, а інші ні, дані вже не будуть однорідними."
#~ msgid "If you establish a relational filter and you B<have> changed the default Numeric or Character I<justification>, that filter is likely to fail. When a relational filter is applied to a memory field and you B<have not> changed the I<scaling>, it may produce misleading results. This happens, for example, because `100.0m' (MiB) would appear greater than `1.000g' (GiB) when compared as strings."
#~ msgstr "Якщо вами встановлено фільтр відношення і ви B<змінили> типове I<вирівнювання> числових або символьних даних, цей фільтр, ймовірно, не спрацює. Якщо фільтр відношення застосовано до поля пам'яті, і вами B<не змінено> I<масштабування>, результати можуть бути помилковими. Таке трапляється, наприклад, оскільки «100.0m» (МіБ) програма вважає більшим значенням за «1.000g» (ГіБ) при порівнянні рядків."
#~ msgid "If your filtered results appear suspect, simply altering justification or scaling may yet achieve the desired objective. See the `j', `J' and `e' \\*(CIs for additional information."
#~ msgstr "Якщо фільтровані результати виглядають підозріливо, просто змініть вирівнювання або масштабування для отримання бажаної мети. Щоб дізнатися більше про вирівнювання, ознайомтеся із описом інтерактивних команд «j», «J» і «e»."
#~ msgid "B<Potential Problems>"
#~ msgstr "B<Потенційні проблеми>"
#~ msgid "These B<GROUP> filters could produce the exact same results or the second one might not display anything at all, just a blank \\*(TW."
#~ msgstr "Ці фільтри для B<GROUP> можуть давати ті самі результати або другий фільтр не покаже нічого, просто порожнє вікно завдань."
#~ msgid "Either of these B<RES> filters might yield inconsistent and/or misleading results, depending on the current memory scaling factor. Or both filters could produce the exact same results."
#~ msgstr "Обидва цих фільтри за B<RES> можуть дати різні і/або помилкові результати, залежно від поточного коефіцієнта масштабування пам'яті. Втім, обидва фільтри можуть дати абсолютно однакові результати."
#~ msgid "This B<nMin> filter illustrates a problem unique to scalable fields. This particular field can display a maximum of 4 digits, beyond which values are automatically scaled to KiB or above. So while amounts greater than 9999 exist, they will appear as 2.6m, 197k, etc."
#~ msgstr "Цей фільтр за B<nMin> ілюструє проблему, яка є притаманною масштабованим полям. У цьому полі, зокрема, може бути показано не більше 4 цифр. При перевищенні кількості значення буде автоматично масштабовано до КіБ або більшої одиниці. І, якщо існують значення, які є більшими 9999, їх буде показано як 2,6m, 197k тощо."
#~ msgid "These examples illustrate how Other Filtering can be creatively applied to achieve almost any desired result. Single quotes are sometimes shown to delimit the spaces which are part of a filter or to represent a request for status (^O) accurately. But if you used them with if-values in real life, no matches would be found."
#~ msgstr "Ці приклад ілюструють, як інше фільтрування можна творчо застосувати до отримання майже будь-яких бажаних результатів. Одинарні лапки іноді використовують для відокремлення пробілів, які є частиною фільтра, або точного представлення запиту щодо стану (^O). Але якщо ви використаєте їх із значеннями в умовах в реальних прикладах, нічого не буде знайдено."
#~ msgid "Assuming field B<nTH> is displayed, the first filter will result in only multi-threaded processes being shown. It also reminds us that a trailing space is part of every displayed field. The second filter achieves the exact same results with less typing."
#~ msgstr "Якщо припустити, що показано поле B<nTH>, перший фільтр призведе до показу лише процесів із декількома потоками обробки. Також приклад нагадує нам, що частиною кожного показаного поля є кінцевий пробіл. Другий фільтр дає абсолютно такий самий результат, але він є коротшим."
#~ msgid "With Forest View mode active and the B<COMMAND> column in view, this filter effectively collapses child processes so that just 3 levels are shown."
#~ msgstr "Якщо активним є режим перегляду лісу і показано стовпчик B<COMMAND>, використання цього фільтра призведе до згортання дочірніх процесів так, що буде показано лише 3 рівні."
#~ msgid " !COMMAND=` `- ' ( ' for clarity only )\n"
#~ msgstr " !COMMAND=` `- ' ( ' лише для зручності читання )\n"
#~ msgid "The final two filters appear as in response to the status request key (^O). In reality, each filter would have required separate input. The B<PR> example shows the two concurrent filters necessary to display tasks with priorities of 20 or more, since some might be negative. Then by exploiting trailing spaces, the B<nMin> series of filters could achieve the failed `9999' objective discussed above."
#~ msgstr "Останні два фільтри показано як відповіді на натискання комбінації запиту щодо стану (^O). У реальності для кожного з них потрібні окремі вхідні дані. У прикладі для B<PR> показано два конкурентних фільтри, потрібні для показу завдань із пріоритетностями 20 або більше, оскільки значення пріоритетності можуть бути і від'ємними. Далі, використовуючи кінцеві пробіли, набір фільтрів B<nMin> надає змогу отримати результат у випадку з помилкою «9999», яку обговорено вище."
#~ msgid "\\*(NT Whenever Other Filtering is active in a window, \\*(We will turn column highlighting \\*F to prevent false matches on internal non-display escape sequences. Such highlighting will be restored when a window is no longer subject to filtering. \\*(XC `x' \\*(CI for additional information on sort column highlighting."
#~ msgstr "\\*(NT Задіяння іншого фільтрування у вікні призведе до того, що \\*(We вимикатиме підсвічування стовпчика, щоб запобігти помилковому виявленню відповідників у внутрішніх непоказаних керівних послідовностях. Таке підсвічування буде відновлено, щойно вікно перестане бути об'єктом для фільтрування. Див. інтерактивну команду «x», щоб дізнатися більше про підсвічування стовпчика упорядковування."
#~ msgid "6. FILES"
#~ msgstr "6. ФАЙЛИ"
#~ msgid "6a. PERSONAL Configuration File"
#~ msgstr "6а. ФАЙЛ ОСОБИСТИХ НАЛАШТУВАНЬ"
#~ msgid "This file is created or updated via the 'W' \\*(CI."
#~ msgstr "Цей файл створюється і оновлюється інтерактивною командою «W»."
#~ msgid "The legacy version is written as `$HOME/.your-name-4-\\*(We' + `rc' with a leading period."
#~ msgstr "Застарілу версію буде записано як `$HOME/.ваша-назва-4-\\*(We' + `rc' з початковою крапкою у назві."
#~ msgid "A newly created \\*(CF is written as procps/your-name-4-\\*(We' + `rc' without a leading period. The procps directory will be subordinate to either $XDG_CONFIG_HOME when set as an absolute path or the $HOME/.config directory."
#~ msgstr "Новостворений файл налаштувань буде записано як procps/ваша-назва-4-\\*(We' + «rc» без початкового пробілу. Каталог procps є підкаталогом абоу каталозі, який визначається змінною $XDG_CONFIG_HOME, якщо її значенням є абсолютний шлях, абоу каталозі $HOME/.config."
#~ msgid "While not intended to be edited manually, here is the general layout:"
#~ msgstr "Хоча файл і не призначено для редагування вручну, ось його загальне компонування:"
#~ msgid "If a valid absolute path to the rcfile cannot be established, customizations made to a running \\*(We will be impossible to preserve."
#~ msgstr "Якщо коректний абсолютний шлях до файла rc не вдасться встановити, налаштування, які виконано у запущеній програмі \\*(We, не можна буде зберегти."
#~ msgstr "6б. ДОДАВАННЯ ЗАПИСІВ ДЛЯ ІНСПЕКТУВАННЯ"
#~ msgid "To exploit the `Y' \\*(CI, you must add entries at theB< end> of the \\*(We personal \\*(CF. Such entries simply reflect a file to be read or command/pipeline to be executed whose results will then be displayed in a separate scrollable, searchable window."
#~ msgstr "Щоб скористатися інтерактивною командою «Y», вам слід додати записи B<наприкінці> особистого файла налаштувань \\*(We. Такі записи просто вказують файл, який слід прочтати або команду/канал даних, які слід виконати, і результати виконання яких слід показати в окремому придатному до гортання і пошуку вікні."
#~ msgid "If you don't know the location or name of your \\*(We rcfile, use the `W' \\*(CI to rewrite it and note those details."
#~ msgstr "Якщо вам не відоме місце зберігання або назва вашого файла rc \\*(We, скористайтеся інтерактивною командою «W», щоб перезаписати його і запам'ятайте його параметри."
#~ msgid "Inspect entries can be added with a redirected echo or by editing the \\*(CF. Redirecting an echo risks overwriting the rcfile should it replace (E<gt>) rather than append (E<gt>E<gt>) to that file. Conversely, when using an editor care must be taken not to corrupt existing lines, some of which will contain unprintable data or unusual characters."
#~ msgstr "Записи інспектування можна додати переспрямовуванням echo або редагуванням файла налаштувань. Переспрямовування echo небезпечне через можливість перезапису файла rc, якщо буде використано заміну (E<gt>), а не дописування (E<gt>E<gt>) до цього файла. А якщо ви користуватиметеся редактором, слід слідкувати за тим, щоб не пошкодити наявні рядки, деякі з яких можуть містити непридатні до друку або незвичайні символи."
#~ msgid "Those Inspect entries beginning with a `#' character are ignored, regardless of content. Otherwise they consist of the following 3 elements, each of whichI< must> be separated by a tab character (thus 2 `\\et' total):"
#~ msgstr "Записи інспектування, які починаються з символу «#» буде проігноровано, незалежно від вмісту. Інші записи мають складатися з вказаних нижче 3 елементів, кожен з яких I<має> бути відокремлено від інших символом табуляції (отже, містити загалом 2 «\\et»):"
#~ msgid "The two types of Inspect entries areI< not> interchangeable. Those designated `B<file>' will be accessed using fopen and must reference a single file in the `.fmts' element. Entries specifying `B<pipe>' will employ popen, their `.fmts' element could contain many pipelined commands and, none can be interactive."
#~ msgstr "Два типи записів інспектування I<не> є взаємозамінними. Доступ до тих, які позначено як «B<file>», буде здійснюватися за допомогою fopen, вони мають посилатися на єдиний файл в елементі «.fmts». Записи, які задають «B<pipe>» підлягатимуть дії popen, їхній елемент «.fmts» може містити багато команд у конвеєрі, жодна з цих команд не повинна бути інтерактивною."
#~ msgid "If the file or pipeline represented in your `.fmts' deals with the specific PID input or accepted when prompted, then the format string must also contain the `B<%d>' specifier, as these examples illustrate."
#~ msgstr "Якщо файл або конвеєр, представлений у вашому «.fmts», має справу зі специфічними вхідними даними PID або приймає дані, якщо запитано, у рядку форматування також має міститися специфікація «B<%d>», як у наших демонстраційних прикладах."
#~ msgid "For `B<pipe>' type entries only, you may also wish to redirect stderr to stdout for a more comprehensive result. Thus the format string becomes:"
#~ msgstr "Лише для записів типу «B<pipe>», вам, ймовірно, також слід переспрямувати stderr до stdout для покращення результатів. Таким чином, рядок форматування буде таким:"
#~ msgid "Here are examples of both types of Inspect entries as they might appear in the rcfile. The first entry will be ignored due to the initial `#' character. For clarity, the pseudo tab depictions (^I) are surrounded by an extra space but the actual tabs would not be."
#~ msgstr "Тут наведено приклади обох типів записів інспектування у такому вигляді, у якому вони можуть з'являтися у файлі rc. Перший запис буде проігноровано через початковий символ «#». Для зручності читання до псевдозамінників табуляції (^I) додано додаткові пробіли з обох боків, але справжні табуляції таким чином не виокремлено."
#~ msgid "Except for the commented entry above, these next examples show what could be echoed to achieve similar results, assuming the rcfile name was `.toprc'. However, due to the embedded tab characters, each of these lines should be preceded by `B</bin/echo -e>', not just a simple an `echo', to enable backslash interpretation regardless of which shell you use."
#~ msgstr "Окрім коментованого запису вище, у наступних прикладах показано, що можна переспрямувати з echo для отримання подібних результатів, у припущенні, що файлом rc є файл «.toprc». Втім, через вбудовані символи табуляції перед кожним з цих рядків слід дописувати «B</bin/echo -e>», а не просто «echo», щоб уможливити обробку символів зворотної похилої риски, незалежно від використаної вами командної оболонки."
#~ msgid "If any inspect entry you create produces output with unprintable characters they will be displayed in either the ^C notation or hexadecimal E<lt>FFE<gt> form, depending on their value. This applies to tab characters as well, which will show as `^I'. If you want a truer representation, any embedded tabs should be expanded. The following example takes what could have been a `file' entry but employs a `pipe' instead so as to expand the embedded tabs."
#~ msgstr "Якщо будь-який зі створених вами записів інспектування виводитиме дані із непридатними до друку символами, їх буде показано абоу позначеннях, подібних до ^C, абоу шістнадцятковій формі, подібній до E<lt>FFE<gt>, залежно від значення. Це стосується символів табуляції, які буде показано як «^I». Якщо вам потрібне краще представлення, усі вбудовані табуляції має бути розгорнуто. У наведеному нижче прикладі програма приймає те, що могло б бути записом «file», але використовує замість нього «pipe» для розгортання вбудованих табуляцій."
#~ msgid "\\*(NT Some programs might rely on I<SIGINT> to end. Therefore, if a `B<pipe>' such as the following is established, one must use Ctrl-C to terminate it in order to review the results. This is the single occasion where a `^C' will not also terminate \\*(We."
#~ msgstr "\\*(NT Для завершення деяких програм може бути потрібним I<SIGINT>. Тому, якщо встановлено «B<pipe>», подібний до наведеного нижче, доведеться скористатися Ctrl-C для його переривання, щоб переглянути результати. Це єдиний випадок, коли «^C» не завершить також і роботу \\*(We."
#~ msgid "Lastly, while `B<pipe>' type entries have been discussed in terms of pipelines and commands, there is nothing to prevent you from including I< shell scripts> as well. Perhaps even newly created scripts designed specifically for the `Y' \\*(CI."
#~ msgstr "Нарешті, хоча ми описували записи типу «B<pipe>» у термінах конвеєрів і команд, нічого не заважає вам включати і I<скрипти командної оболонки>. Можливо, навіть новостворені скрипти, які спеціально розроблено для інтерактивної команди «Y»."
#~ msgid "For example, as the number of your Inspect entries grows over time, the `Options:' row will be truncated when screen width is exceeded. That does not affect operation other than to make some selections invisible. However, if some choices are lost to truncation but you want to see more options, there is an easy solution hinted at below."
#~ msgstr "Наприклад, зі зростанням кількості записів інспектування з часом, рядок «Параметри:» буде обрізано при перевищенні ширини екрана. Це не вплине на працездатність записів, але зробить деякі з варіантів вибору невидимими. Втім, якщо деякі варіанти обрізано, а ви хочете переглянути усі, існує просте рішення, підказку щодо якого можна бачити нижче."
#~ msgid "The entries in the \\*(We rcfile would have a number for the `.name' element and the `help' entry would identify a shell script you've written explaining what those numbered selections actually mean. In that way, many more choices can be made visible."
#~ msgstr "Записи у файлі rc \\*(We повинні мати номери у елементах «.name», а запис «help» має ідентифікувати скрипт оболонки, який ви написали для пояснення того, що саме позначають ці нумеровані варіанти вибору. У такий спосіб можна зробити видимими набагато більше варіантів вибору."
#~ msgid "This \\*(CF represents defaults for users who have not saved their own \\*(CF. The format mirrors exactly the personal \\*(CF and can also include `inspect' entries as explained above."
#~ msgstr "Цей файл налаштувань містить типові значення для користувачів, якими не було збережено власний файл налаштувань. Формат точно такий самий, як в особистих файлів налаштувань, а також може включати записи «inspect», які описано вище."
#~ msgid "The presence of this file will influence which version of the help screen is shown to an ordinary user."
#~ msgstr "Наявність цього файла вплине на те, яку версію екрана довідки буде показано звичайному користувачу."
#~ msgid "More importantly, it will limit what ordinary users are allowed to do when \\*(We is running. They will not be able to issue the following commands."
#~ msgstr "Що важливіше, він обмежить перелік завдань, які зможуть виконувати звичайні користувачі, коли запущено \\*(We. Користувачі не зможуть віддавати наведені нижче команди."
#~ msgid "Many of these tricks work best when you give \\*(We a scheduling boost. So plan on starting him with a nice value of -10, assuming you've got the authority."
#~ msgstr "Багато з цих трюків найкраще працюють, якщо ви підвищите пріоритетність планування \\*(We. Тому заплануйте запуск програми із значенням пріоритетності (nice) -10, якщо ви маєте відповідні права доступу."
#~ msgid "The user interface, through prompts and help, intentionally implies that the delay interval is limited to tenths of a second. However, you're free to set any desired delay. If you want to see Linux at his scheduling best, try a delay of .09 seconds or less."
#~ msgstr "Інтерфейс користувача, у запитах і довідці, навмисне припускає, що інтервал затримки обмежено десятими частками секунди. Втім, ви можете встановити будь-яку бажану затримку. Якщо ви хочете бачити усі можливості Linux, спробуйте затримку у 0,09 секунд або меншу."
#~ msgid "For this experiment, under x-windows open an xterm and maximize it. Then do the following:"
#~ msgstr "Для цього експерименту відкрийте у x-window xterm і максимізуйте вікно програми. Далі, зробіть таке:"
#~ msgid "Under an xterm using `white-on-black' colors, on \\*(We's Color Mapping screen set the task color to black and be sure that task highlighting is set to bold, not reverse. Then set the delay interval to around .3 seconds."
#~ msgstr "У xterm з використанням чорно-білих кольорів на екрані прив'язки кольорів \\*(We встановіть чорний колір завдань і переконайтеся, що для підсвічування встановлено напівжирний шрифт, а не обернений. Далі, встановіть інтервал затримки у значення, яке приблизно дорівнює 0,3 секунди."
#~ msgid "Delete the existing rcfile, or create a new symlink. Start this new version then type `T' (a secret key, \\*(Xt 4c. Task Area Commands, SORTING) followed by `W' and `q'. Finally, restart the program with -d0 (zero delay)."
#~ msgstr "Вилучіть наявний файл rc або створіть нове символічне посилання. Запустіть цю нову версію, потім натисніть клавішу «T» (секретна клавіша, див. 4в. КОМАНДИ ОБЛАСТІ ЗАВДАНЬ, УПОРЯДКОВУВАННЯ), потім клавіші «W» і «q». Нарешті, перезапустіть програму з використанням параметра -d0 (нульова затримка)."
#~ msgid "Your display will be refreshed at three times the rate of the former \\*(We, a 300% speed advantage. As \\*(We climbs the TIME ladder, be as patient as you can while speculating on whether or not \\*(We will ever reach the \\*(We."
#~ msgstr "Ваш дисплей буде оновлюватися утричі швидше, ніж до цього у \\*(We, — 300% підвищення швидкості. Оскільки \\*(We здирається драбиною TIME, будьте терплячими, оскільки важко вгадати, чи зможе \\*(We наздогнати \\*(We."
#~ msgid "With 3 or 4 \\*(TDs visible, pick any window other than the last and turn idle processes \\*F using the `i' \\*(CT. Depending on where you applied `i', sometimes several \\*(TDs are bouncing and sometimes it's like an accordion, as \\*(We tries his best to allocate space."
#~ msgstr "Із 3 або 4 видимими показами завдань виберіть будь-яке вікно, окрім останнього і вимкніть бездіяльні процеси за допомогою команди-перемикача «i». Залежно від того, де вами застосовано «i», іноді підстрибуватимуть декілька показів завдань, а іноді, все нагадуватиме акордеон, оскільки \\*(We намагатиметься якнайкраще використати простір на екрані."
#~ msgid "Set each window's summary lines differently: one with no memory (`m'); another with no states (`t'); maybe one with nothing at all, just the message line. Then hold down `a' or `w' and watch a variation on bouncing windows \\*(Em hopping windows."
#~ msgstr "Встановіть для кожного з вікон різні рядки резюме: один без пам'яті («m»); інший без станів («t»); можливо, один взагалі без нічого, просто рядок повідомлення. Далі, натисніть і утримуйте «a» або «w», і спостерігайте за варіацією у підстрибуванні вікон \\*(Em вікна-стрибунці."
#~ msgid "Display all 4 windows and for each, in turn, set idle processes to \\*F using the `i' \\*(CT. You've just entered the \"extreme bounce\" zone."
#~ msgstr "Зробіть видимими усі 4 вікна, і для кожного, по черзі, вимкніть бездіяльні процеси за допомогою команди-перемикача «i». Ви просто увійшли до зони «екстремальне підстрибування»."
#~ msgid "Display all 4 windows and make sure that 1:Def is the \\*(CW. Then, keep increasing window size with the `n' \\*(CI until all the other \\*(TDs are \"pushed out of the nest\"."
#~ msgstr "Зробіть видимими усі 4 вікна і переконайтеся, що «поточним» вікном є 1:Def. Далі, збільшуйте розмір вікна за допомогою інтерактивної команди «n», аж доки усі інші покази завдань буде «виштовхнуто з гнізда»."
#~ msgid "Start \\*(We and make COMMAND the last (rightmost) column displayed. If necessary, use the `c' \\*(CT to display command lines and ensure that forest view mode is active with the `V' \\*(CT."
#~ msgstr "Запустіть \\*(We із робіть COMMAND останнім (найправішим) показаним стовпчиком. Якщо потрібно, скористайтеся командою-перемикачем «c» для показу рядків команд і переконайтеся, що активним є режим перегляду лісу, скориставшись командою-перемикачем «V»."
#~ msgid "Then use the up/down arrow keys to position the display so that some truncated command lines are shown (`+' in last position). You may have to resize your xterm to produce truncation."
#~ msgstr "Потім скористайтеся клавішами зі стрілками вгору/вниз для розташування показу так, щоб було показано якісь обрізані рядки команд («+» в останній позиції). Ви можете змінити розміри вашого xterm, щоб сталося обрізання."
#~ msgid "Now use the right arrow key to reach the COMMAND column. Continuing with the right arrow key, watch closely the direction of travel for the command lines being shown."
#~ msgstr "Далі, скористайтеся клавішею зі стрілкою праворуч, щоб дістатися стовпчика COMMAND. Продовжіть натискати клавішу зі стрілкою праворуч, ретельно стежте за напрямком у якому рухаються показані рядки команд."