Commit Graph

2053 Commits

Author SHA1 Message Date
Jim Warner
38a668909f top: parent total cpu includes collapsed children, doc
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-07-17 21:00:51 +10:00
Jim Warner
3da7318683 top: parent total cpu includes collapsed children, pgm
Now, when a parent's children have been collapsed, the
cpu used by those unseen tasks will disappear no more.
Instead such tics will be added to the parent's total.

[ if one wished a return to the 'land of lost tics', ]
[ the '#define TREE_VCPUOFF' directive is available. ]

------------------------------------------------------
Note: With collapsible parents now displaying children
cpu usage, it will eventually be noticed the cpu stats
for the summary area and task areas often vary widely.

It's worth a reminder that for top's summary area each
individual cpu and the cpu summary is limited to 100%,
regardless of how many tics a linux kernel may export.

An individual task is limited to 100% times the number
of threads. But, in no case will cpu usage ever exceed
100% times total number of processors. Such limits are
further reduced under 'Solaris' mode ('I' toggle off).
In this mode, a task cpu usage will never exceed 100%.
These limits will now also apply to collapsed parents.

In addition to those influences, results are subjected
to kernel timer sampling anomalies and the distortions
inherent in a small sample size, made worse by smaller
delay intervals. Often there is just 1 or 2 tics for a
few tasks at smaller intervals such as: 1/10th second.

Anyway, should questions on this subject arise, a good
starting point, beyond the reminders above, is the 1st
link listed below. Those other links were derivatives.

Reference(s):
. from the kernel documentation
https://www.kernel.org/doc/Documentation/cpu-load.txt
. as mentioned in the above kernel documentation
https://lkml.org/lkml/2007/2/12/6
. from above, with many more links on the subject
https://www.boblycat.org/~malc/apc/

Signed-off-by: Jim Warner <james.warner@comcast.net>

top: parent total cpu includes collapsed children, pgm
2018-07-17 21:00:51 +10:00
Jim Warner
e66c36794a top: a refactor to prepare for including collapsed cpu
So that the impact (minimal) of the next commit can be
isolated, this commit just involves a little renaming,
reformat plus a refactor of some proc_t pointer logic.

[ renaming, relocation and changes to 'user_matched' ]
[ wasn't strictly necessary, but now mirrors newlib. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-07-17 21:00:51 +10:00
Jim Warner
c6e68e2fed top: a few tweaks for those scrolling (mostly) changes
This patch just addresses some edge cases with respect
to 'unseen' tasks. Given the ability to preserve other
filters in the rcfile, it's entirely possible the very
first task(s) may not be visible at top startup. Also,
when switching between windows ('a'/'w') we should try
to always position its row #1 on some visible process.

Lastly, a window might have *NO* visible tasks at all.
Therefore, protect 'window_hlp' from an infinite loop.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-26 21:22:12 +10:00
Craig Small
2c2d86e6cc misc: Remove build badge
GitLab now has a separate spot for build status badges outside the
README.

References:
 procps-ng/procps#95

Signed-off-by: Craig Small <csmall@enc.com.au>
2018-06-23 22:51:12 +10:00
Robert Bowmaker
463ed0049c Fix error in vmstat documentation.
Inspection of vmstat.c and experimentation with the binary itself
both confirm that the units of the swap (si/so) fields are
controlled by the --unit option.

References:
 procps-ng/procps!69
 procps-ng/procps#100

Signed-off-by: Craig Small <csmall@enc.com.au>
2018-06-23 22:15:33 +10:00
Jim Warner
95df5a06f4 top: normalize vertical scrolling for hidden processes
To my knowledge, nobody has ever complained about some
anomalies when scrolling vertically if tasks should be
hidden from view. This can happen with the user filter
('u/U') or other filter ('o/O') features. And although
some tasks are not shown, they still impact scrolling.

This is most apparent when that scroll coordinates msg
is on ('C') & up/down arrow keys used (vs. pgup/pgdn).

Now that we can collapse/expand forked children, there
is a potential for yet more of those hidden processes.

So this commit normalizes vertical scrolling providing
an expected behavior. In other words, the up/down keys
skip the unseen tasks to reposition on a visible task.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:57 +10:00
Jim Warner
78dcaffad7 top: refactor the 'scroll coordinates' message support
This patch is simply preparation for upcoming vertical
scrolling enhancements. With those changes, it will be
impossible to predict what the beginning task position
should be at the time the message is currently issued.

This patch will allow such a message to be shown after
the individual windows' tasks have all been displayed.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:57 +10:00
Jim Warner
3943b185a9 top: allow collapsible forest view children, documents
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:57 +10:00
Jim Warner
14eb7275d9 top: allow collapsible forest view children, pgm logic
The issue cited below really dealt with preserving the
'Other filter' criteria in the rcfile. But as an aside
the htop 'F6' feature (collapsed children) was raised.

I took that as an implied challenge and decided to try
implementing a similar feature in top. So, this commit
will now provide a brand new forest view toggle ('^V')
which will be used to collapse/expand forked children.

[ this patch will also lead to additional patches in ]
[ support of more rational vertical scrolling, since ]
[ many more tasks might now be hidden in some window ]

Reference(s):
. where this secondary issue was raised
https://gitlab.com/procps-ng/procps/issues/99

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
57f0ff367c top: to prepare for collapse, move forest view support
In anticipation of a new collapsible child feature, we
will have to make some forest view variables available
to that 'keys_task()' function. This commit just moves
the forest view logic ahead of tertiary input support.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
06d4d985a6 top: 'other filters' saved with config file, documents
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
a6f86732f2 top: 'other filters' saved with config file, pgm logic
Well, after the rearranging and refactoring, all those
active 'other filter' entries for each window will now
be preserved in the user's configuration file via 'W'.

For raising the issue below, thanks to Marco Ippolito.

Reference(s):
https://gitlab.com/procps-ng/procps/issues/99

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
993d22211f top: refactored some more peripheral 'inspect' support
These modifications are being made now in anticipation
of some coming 'other filter' config file changes. Our
entries must be written last to the rc file since that
is where the users have been told to 'echo' additions.

Therefore, that 'config_insp' function must be adapted
to anticipate a passed buffer that was already primed.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
80057ec06f top: refactored some of that 'other filtering' support
If we are to support preserving 'other filter' entries
in the rcfile, then the current logic setting up those
osel entries for a WIN_t must be shareable for startup
and when interacting with a user. So, this commit just
repositions this current code in a shareable function.

[ along the way, we give the prior guy a proper name ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
1fe5a5415f top: reposition some of that 'other filtering' support
When we get around to saving that 'Other Filter' stuff
in the rcfile, we'll need access to the Fieldstab plus
the justify_pad() function. So this commit repositions
two 'osel' functions in anticipation of adding 1 more.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
2b7779fdeb top: refactor some of that configuration files support
The 'config_file()' function was getting a little long
in the tooth, so this commit simply renames/rearranges
some stuff anticipating 'other filters' in the rcfile.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
e691f75b81 top: let's honor <Esc> key on color mapping screen too
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
291d98ee50 top: make rcfile duplicate fields check more efficient
Jeeze, there was no need to employ *both* strchr() and
strrchr() when ensuring fields hadn't been duplicated.

So let's avoid one of those function calls completely.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-23 22:03:56 +10:00
Jim Warner
949a3c9c2e top: a tweak to the recent 256-color termninal support
We now use the actual terminfo 'max_colors' value with
the 'color mapping' screen, not that hard coded '256'.

Reference(s):
https://gitlab.com/procps-ng/procps/issues/96
. introduced 256 color support
commit cf057d2fe5

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-13 22:11:29 +10:00
Jim Warner
9ea85bc653 top: treat all of those vertical scroll keys uniformly
When not displaying all tasks (the 'i' toggle is off),
the concept of vertical scrolling has no real meaning.

However, only 2 keys (up/down) impacting that vertical
position were currently being disabled with this mode.

This patch will extend such treatment to the following
additional vertical impact keys: pgup,pgdn,home & end.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-13 22:11:28 +10:00
Jim Warner
9dd7a97c4a top: force return to row 1 for thread mode transitions
This program does a good job of policing that vertical
scrolled position, ensuring that total tasks are never
exceeded. However, during transitions from thread mode
to normal task mode (the 'H' toggle) that wasn't true.

And while there was no real harm done, it did make the
use of up/down arrow keys "appear" disabled especially
if that scroll message was not displayed ('C' toggle).

This patch simply forces a return to row #1 whenever a
user toggles that display between thread & task modes.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-13 22:11:28 +10:00
Jim Warner
42f0a341ba top: fix 'iokey()' flaw preventing proper translations
As it turns out, the very first entry in the 'iokey()'
tinfo_tab was preventing the proper translation of the
simulated PgUp/PgDn keys (ctrl+meta+k/j). Ignoring the
tortured history behind the most recent change to that
entry, this patch restores the previous value and once
again properly translates these particular keystrokes.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-13 22:11:28 +10:00
Qualys Security Advisory
0bfe708c4b vmstat: Prevent out-of-bounds writes in new_header() and diskheader().
This does not happen with the default string (" -----timestamp-----"),
but this string is translated (to unknown lengths).
2018-06-13 22:06:51 +10:00
Qualys Security Advisory
0b55f0dc80 vmstat: Check return values of localtime() and strftime().
Otherwise it leads to NULL-pointer dereferences (in case of localtime()
errors) and indeterminate contents of timebuf (in case of strftime()
errors).
2018-06-13 22:06:30 +10:00
Qualys Security Advisory
b4f4718481 vmstat: Replace memcmp() with strncmp().
Otherwise this may read out-of-bounds (there is no guarantee that 5
bytes are actually available at partition/optarg).
2018-06-13 22:06:14 +10:00
Qualys Security Advisory
4ce81d4dcc vmstat: getopt*() returns -1 when done, not EOF.
Luckily, EOF is usually -1, but this is not guaranteed by the standard.
2018-06-13 22:05:57 +10:00
Qualys Security Advisory
2503ec3630 w: Clamp maxcmd to the MIN/MAX_CMD_WIDTH range.
The current checks allow out-of-range values (for example, if
getenv/atoi returns ~-2GB, maxcmd becomes ~+2GB after the subtraction).
This is not a security problem, none of this is under an attacker's
control.
2018-06-13 22:05:18 +10:00
Qualys Security Advisory
3a437012f0 w: Prevent out-of-bounds reads in print_display_or_interface().
They occur if disp or tmp reaches host + len: add checks. Also, constify
everything.
2018-06-13 22:04:58 +10:00
Craig Small
e1eaf83b34 misc: Tell po4a to handle email macros
References:
 https://www.freelists.org/post/procps/newlib-Qualys-patches
2018-06-07 21:52:46 +10:00
Jim Warner
cf057d2fe5 top: provide the means to exploit a 256-color terminal
With the Qualys security audit, we began to harden our
treatment of the top rcfile. In particular, the values
read were checked so as to prevent some malicious user
from editing it in order to achieve an evil objective.

However when it came to colors I was surprised to find
that at least one user edited the rcfile for 256-color
support. Unfortunately, our new checks prevented this.

So this commit will provide the means to exploit those
extra colors with no need to manually edit the rcfile.

Reference(s):
https://gitlab.com/procps-ng/procps/issues/96

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-07 21:35:59 +10:00
Jim Warner
3352bddba5 library: tweak that change to 'supgrps_from_supgids()'
It's good that those Qualys folks were looking over my
shoulder. They suggested a change to that commit shown
below. This improvement was obviously a better choice.

Reference(s):
. original change
commit f9a8009e27

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-06-07 21:35:59 +10:00
Jim Warner
f9a8009e27 library: avoid problems involving 'supgid' mishandling
Following that patch referenced below, the top SUPGRPS
field would produce a segmentation fault and ps SUPGRP
would often show "(null)". Such problems resulted from
some faulty logic in the status2proc() routine dealing
with 'Groups' (supgid) which served as a source field.

For many processes the original code produced an empty
string which prevented conversion to the expected "-".
Moreover, prior to release 3.3.15 such an empty string
will become 0 after strtol() which pwcache_get_group()
translates to 'root' yielding very misleading results.

So, now we'll check for empty '/proc/#/status/Groups:'
fields & consistently provide a "-" value for callers.

[ we'll also protect against future problems in that ]
[ new qualys logic by always ensuring valid 'supgrp' ]
[ pointers - logic which revealed our original flaw! ]

Reference(s):
. original qualys patch
0071-proc-readproc.c-Harden-supgrps_from_supgids.patch

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-31 22:02:03 +10:00
Bjarni Ingi Gislason
336d4ab90e docs: Tidying of ps,kill and skill manpages
Some minor tidying of these three man pages using more of the modern
(ish) macros that have been around for a while.

References:
 https://bugs.debian.org/893452
 https://bugs.debian.org/893457
 https://bugs.debian.org/894480

Signed-off-by: Craig Small <csmall@enc.com.au>
2018-05-31 21:18:27 +10:00
Craig Small
c51b329a32 docs: use correct units in free.1
The free manpage used the correct unit names (e.g. membibyte) but the
incorrect unit (e.g. M ) for the human-readable option.

References:
 https://bugs.debian.org/898774

Signed-off-by: Craig Small <csmall@enc.com.au>
2018-05-31 20:34:13 +10:00
Jim Warner
fe23360520 top: sanitized some potentially corrupt 'Inspect' data
This guards against rcfile 'Inspect' entries which may
include non-printable characters. While this shouldn't
occur, we have no real control over those crazy users.

[ and, while such data can't be used maliciously, it ]
[ does adversely impact such a user's screen display ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-31 20:28:32 +10:00
Jim Warner
434530a038 top: prevent buffer overruns in 'inspection_utility()'
When a Qualys patch was reverted as being unwarranted,
1 specific problem their patch had, in fact, prevented
was re-introduced. This patch corrects that oversight.

Reference(s):
. qualys patch revert
commit c502678715

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-31 20:28:32 +10:00
Jim Warner
a42742b0df top: add another field sanity check in 'config_file()'
Until the Qualys security audit I had never considered
it a possibility that some malicious person might edit
the top config file to achieve some nefarious results.

And while the Qualys approach tended to concentrate on
the symptoms from such an effort, subsequent revisions
more properly concentrated on startup and that rcfile.

This commit completes those efforts with 1 more field.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-31 20:28:32 +10:00
Jim Warner
cc5c9e6c1e top: don't mess with groff line length in man document
I've long since forgotten why the attempt to influence
groff line lengths was made. However, I did receive an
email regarding problems formatting postscript output.

Hopefully this patch will eliminate any such problems.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-31 20:28:32 +10:00
Craig Small
76b692c440 misc: add asc sign files to ignore 2018-05-31 20:28:20 +10:00
Craig Small
7bb949bcba library: Bump API to 8:0:1
We had two structures change which means another API bump :/
2018-05-20 07:35:37 +10:00
Craig Small
59c5133ff1 misc: Reorder NEWS 2018-05-20 07:34:17 +10:00
Craig Small
14005a371e ps: Increase command selection field to 64
The library now presents command names up to 64 characters, in line with
the kernel changes.  ps command name selection (the -C option) now also
is 64 characters long.

References:
 commit 2cfdbbe897
2018-05-19 22:10:11 +10:00
Craig Small
2fed385ac2 testsuite: Remove pgrep ?15 char test
The referenced commit removed the warning for using pgrep with over
15 characters. The check for this warning needs to also be removed.

References:
 commit c32ab58b94
2018-05-19 21:50:21 +10:00
Jim Warner
c699f2e26d top: just respond to the increased command name length
The command name for running tasks is displayed by top
in a variable length field, so the increase from 16 to
64 bytes was not a problem. However, there's one place
where top is sensitive to length - insp_view_choice().

So, this patch just bumps a buffer used to display it.

Reference(s):
. increased 'comm' length
commit 2cfdbbe897

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-19 21:48:13 +10:00
Jim Warner
607edc2064 top: eliminate a couple of warnings of -Wunused-result
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-19 21:47:58 +10:00
Jim Warner
de807a639f top: ensure sane rcfile values for the remaining stuff
This will protect some remaining rcfile variables from
a possible manual editing of top's configuration file.

[ and correct two #error related boo-boos introduced ]
[ with the system default rcfile in the commit shown ]

Reference(s):
. introduced /etc/topdefaultrc
commit 3e6a208ae5

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-19 21:47:02 +10:00
Jim Warner
129b7e2b44 top: Prevent out-of-bounds writes in PUFF(). __Tweaked
This commit moves some overhead to the Batch mode path
where it's needed. And given the new 'else if' test we
can delete some now redundant logic in the other path.

Reference(s):
. original qualys patch
0117-top-Prevent-out-of-bounds-writes-in-PUFF.patch
commit 059ae8b512

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-19 21:46:07 +10:00
Jim Warner
d34c6eb5b4 top: address 'show_special()' o-o-b read/write concern
This patch addresses a potential (but unlikely) buffer
overflow by reducing, if necessary, a memcpy length by
3 bytes to provide for an eol '\0' and 2 unused buffer
positions which also might receive the '\0' character.

[ note to future analysis tool: just because you see ]
[ binary data being manipulated in the routine, that ]
[ doesn't mean such function was passed binary data! ]

Reference(s):
. original qualys patch
0116-top-Fix-out-of-bounds-read-write-in-show_special.patch
commit ed8f6d9cc6

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-19 21:45:36 +10:00
Jim Warner
2fb269a5b0 top: Fix out-of-bounds read/write in show_... REVERTED
I'm reverting this patch to prepare for some alternate
solution. In that solution I will address point #1 but
point #2 is based on a wrong assumption. There will be
no binary data ever found in the 'glob' passed to this
show_special() function. It is now always simple text.

------------------------------------------------ original commit message
This patch fixes two problems:

1/ In the switch case 0, if sub_end is at the very end of lin[], the two
null-byte writes are off-by-two (a stack-based buffer overflow). Replace
this end-of-string "emulation" with an equivalent test on ch (and then
goto/break out of the loop).

2/ "sub_end += 2" jumps over the null-byte terminator in lin[] if the
line contains a raw (without a tilde) \001-\010 character. Detect such a
null-byte terminator and goto/break out of the loop.

Note: in the case of a raw \001-\010 character, the character at
"sub_end + 1" is never processed (it is skipped/jumped over); this is
not a security problem anymore (since 2/ was fixed), so we decided not
to change this behavior, for backward-compatibility.
------------------------------------------------------------------------

Reference(s):
. original qualys patch
0116-top-Fix-out-of-bounds-read-write-in-show_special.patch
commit ed8f6d9cc6

Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-05-19 21:44:35 +10:00