shadow/src/gpasswd.c

1087 lines
27 KiB
C
Raw Normal View History

/*
* Copyright (c) 1990 - 1994, Julianne Frances Haugh
* Copyright (c) 1996 - 2000, Marek Michałkiewicz
* Copyright (c) 2001 - 2006, Tomasz Kłoczko
* Copyright (c) 2007 - 2008, Nicolas François
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the copyright holders or contributors may not be used to
* endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <config.h>
#ident "$Id$"
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <grp.h>
#include <pwd.h>
#include <signal.h>
#include <stdio.h>
#include <sys/types.h>
#include "defines.h"
#include "exitcodes.h"
#include "groupio.h"
#include "nscd.h"
#include "prototypes.h"
#ifdef SHADOWGRP
#include "sgroupio.h"
#endif
/*
* Global variables
*/
/* The name of this command, as it is invoked */
static char *Prog;
#ifdef SHADOWGRP
/* Indicate if shadow groups are enabled on the system
* (/etc/gshadow present) */
static bool is_shadowgrp;
static bool sgr_locked = false;
#endif
static bool gr_locked = false;
/* Flags set by options */
static bool aflg = false;
static bool Aflg = false;
static bool dflg = false;
static bool Mflg = false;
static bool rflg = false;
static bool Rflg = false;
/* The name of the group that is being affected */
static char *group = NULL;
/* The name of the user being added (-a) or removed (-d) from group */
static char *user = NULL;
/* The new list of members set with -M */
static char *members = NULL;
#ifdef SHADOWGRP
/* The new list of group administrators set with -A */
static char *admins = NULL;
#endif
/* The name of the caller */
static char *myname = NULL;
/* The UID of the caller */
static uid_t bywho;
/* Indicate if gpasswd was called by root */
#define amroot (0 == bywho)
/* The number of retries for th user to provide and repeat a new password */
#ifndef RETRIES
#define RETRIES 3
#endif
/* local function prototypes */
static void usage (void);
static RETSIGTYPE catch_signals (int killed);
static void fail_exit (int status);
static bool is_valid_user_list (const char *users);
static void process_flags (int argc, char **argv);
static void check_flags (int argc, int opt_index);
static void open_files (void);
static void close_files (void);
#ifdef SHADOWGRP
static void get_group (struct group *gr, struct sgrp *sg);
static void check_perms (const struct group *gr, const struct sgrp *sg);
static void update_group (struct group *gr, struct sgrp *sg);
static void change_passwd (struct group *gr, struct sgrp *sg);
#else
static void get_group (struct group *gr);
static void check_perms (const struct group *gr);
static void update_group (struct group *gr);
static void change_passwd (struct group *gr);
#endif
/*
* usage - display usage message
*/
static void usage (void)
{
fprintf (stderr, _("Usage: %s [-r|-R] group\n"), Prog);
fprintf (stderr, _(" %s [-a user] group\n"), Prog);
fprintf (stderr, _(" %s [-d user] group\n"), Prog);
#ifdef SHADOWGRP
fprintf (stderr,
_(" %s [-A user,...] [-M user,...] group\n"), Prog);
#else
fprintf (stderr, _(" %s [-M user,...] group\n"), Prog);
#endif
exit (E_USAGE);
}
/*
* catch_signals - set or reset termio modes.
*
* catch_signals() is called before processing begins. signal() is then
* called with catch_signals() as the signal handler. If signal later
* calls catch_signals() with a signal number, the terminal modes are
* then reset.
*/
static RETSIGTYPE catch_signals (int killed)
{
static TERMIO sgtty;
if (0 != killed) {
STTY (0, &sgtty);
2007-12-28 02:58:50 +05:30
} else {
GTTY (0, &sgtty);
2007-12-28 02:58:50 +05:30
}
if (0 != killed) {
(void) putchar ('\n');
(void) fflush (stdout);
fail_exit (killed);
}
}
/*
* fail_exit - undo as much as possible
*/
static void fail_exit (int status)
{
if (gr_locked) {
if (gr_unlock () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, gr_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", gr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"unlocking group file",
group, AUDIT_NO_ID, 0);
#endif
}
}
#ifdef SHADOWGRP
if (sgr_locked) {
if (sgr_unlock () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, sgr_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", sgr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"unlocking gshadow file",
group, AUDIT_NO_ID, 0);
#endif
}
}
#endif
exit (status);
}
/*
* is_valid_user_list - check a comma-separated list of user names for validity
*
* is_valid_user_list scans a comma-separated list of user names and
* checks that each listed name exists is the user database.
2007-12-28 03:00:12 +05:30
*
* It returns true if the list of users is valid.
*/
static bool is_valid_user_list (const char *users)
{
const char *start, *end;
char username[32];
bool valid = true;
size_t len;
for (start = users; (NULL != start) && ('\0' != *start); start = end) {
2007-12-28 03:13:29 +05:30
end = strchr (start, ',');
if (NULL != end) {
len = (size_t) (end - start);
end++;
} else {
len = strlen (start);
}
2007-12-28 02:58:50 +05:30
if (len > sizeof (username) - 1) {
len = sizeof (username) - 1;
2007-12-28 02:58:50 +05:30
}
strncpy (username, start, len);
username[len] = '\0';
/*
* This user must exist.
*/
/* local, no need for xgetpwnam */
if (getpwnam (username) == NULL) {
fprintf (stderr, _("%s: user '%s' does not exist\n"),
2007-12-28 02:58:50 +05:30
Prog, username);
valid = false;
}
}
return valid;
}
static void failure (void)
{
fprintf (stderr, _("%s: Permission denied.\n"), Prog);
fail_exit (1);
}
/*
* process_flags - process the command line options and arguments
*/
static void process_flags (int argc, char **argv)
{
int flag;
int option_index = 0;
static struct option long_options[] = {
{"add", required_argument, NULL, 'a'},
{"delete", required_argument, NULL, 'd'},
{"remove-password", no_argument, NULL, 'r'},
{"restrict", no_argument, NULL, 'R'},
{"administrators", required_argument, NULL, 'A'},
{"members", required_argument, NULL, 'M'},
{NULL, 0, NULL, '\0'}
};
while ((flag = getopt_long (argc, argv, "a:A:d:gM:rR", long_options, &option_index)) != -1) {
switch (flag) {
case 'a': /* add a user */
user = optarg;
* lib/prototypes.h, configure.in, libmisc/Makefile.am, libmisc/xgetXXbyYY.c, libmisc/xgetpwnam.c, libmisc/xgetpwuid.c, libmisc/xgetgrnam.c, libmisc/xgetgrgid.c, libmisc/xgetspnam.c: Added functions xgetpwnam(), xgetpwuid(), xgetgrnam(), xgetgrgid(), and xgetspnam(). They allocate memory for the returned structure and are more robust to successive calls. They are implemented with the libc's getxxyyy_r() functions if available. * libmisc/limits.c, libmisc/entry.c, libmisc/chowntty.c, libmisc/addgrps.c, libmisc/myname.c, libmisc/rlogin.c, libmisc/pwdcheck.c, src/newgrp.c, src/login_nopam.c, src/userdel.c, src/lastlog.c, src/grpck.c, src/gpasswd.c, src/newusers.c, src/chpasswd.c, src/chfn.c, src/groupmems.c, src/usermod.c, src/expiry.c, src/groupdel.c, src/chgpasswd.c, src/su.c, src/useradd.c, src/groupmod.c, src/passwd.c, src/pwck.c, src/groupadd.c, src/chage.c, src/login.c, src/suauth.c, src/faillog.c, src/groups.c, src/chsh.c, src/id.c: Review all the usage of one of the getpwnam(), getpwuid(), getgrnam(), getgrgid(), and getspnam() functions. It was noticed on http://bugs.debian.org/341230 that chfn and chsh use a passwd structure after calling a pam function, which result in using information from the passwd structure requested by pam, not the original one. It is much easier to use the new xget... functions to avoid these issues. I've checked which call to the original get... functions could be left (reducing the scope of the structure if possible), and I've left comments to ease future reviews (e.g. /* local, no need for xgetpwnam */). Note: the getpwent/getgrent calls should probably be checked also. * src/groupdel.c, src/expiry.c: Fix typos in comments. * src/groupmod.c: Re-indent. * libmisc/Makefile.am, lib/groupmem.c, lib/groupio.c, lib/pwmem.c, lib/pwio.c, lib/shadowmem.c, lib/shadowio.c: Move the __<xx>_dup functions (used by the xget... functions) from the <xx>io.c files to the new <xx>mem.c files. This avoid linking some utils against the SELinux library.
2007-11-19 04:45:26 +05:30
/* local, no need for xgetpwnam */
if (getpwnam (user) == NULL) {
fprintf (stderr,
_("%s: user '%s' does not exist\n"), Prog,
user);
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"adding to group",
user, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
aflg = true;
break;
#ifdef SHADOWGRP
case 'A':
if (!amroot) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"Listing administrators",
NULL, (unsigned int) bywho, 0);
#endif
failure ();
}
if (!is_shadowgrp) {
fprintf (stderr,
_("%s: shadow group passwords required for -A\n"),
Prog);
fail_exit (2);
}
admins = optarg;
if (!is_valid_user_list (admins)) {
fail_exit (1);
2007-12-28 02:58:50 +05:30
}
Aflg = true;
break;
#endif
case 'd': /* delete a user */
dflg = true;
user = optarg;
break;
case 'g': /* no-op from normal password */
break;
case 'M':
if (!amroot) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"listing members",
NULL, (unsigned int) bywho, 0);
#endif
failure ();
}
members = optarg;
if (!is_valid_user_list (members)) {
fail_exit (1);
2007-12-28 02:58:50 +05:30
}
Mflg = true;
break;
case 'r': /* remove group password */
rflg = true;
break;
case 'R': /* restrict group password */
Rflg = true;
break;
default:
usage ();
}
}
/* Get the name of the group that is being affected. */
group = argv[optind];
check_flags (argc, optind);
}
/*
* check_flags - check the validity of options
*/
static void check_flags (int argc, int opt_index)
{
int exclusive = 0;
/*
* Make sure exclusive flags are exclusive
*/
if (aflg) {
exclusive++;
}
if (dflg) {
exclusive++;
}
if (rflg) {
exclusive++;
}
if (Rflg) {
exclusive++;
}
if (Aflg || Mflg) {
exclusive++;
}
if (exclusive > 1) {
usage ();
2007-12-28 02:58:50 +05:30
}
/*
* Make sure one (and only one) group was provided
*/
if ((argc != (opt_index+1)) || (NULL == group)) {
usage ();
}
}
/*
* open_files - lock and open the group databases
*
* It will call exit in case of error.
*/
static void open_files (void)
{
if (gr_lock () == 0) {
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, gr_dbname ());
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"locking /etc/group",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
2007-12-28 02:58:50 +05:30
}
gr_locked = true;
2007-12-28 03:13:29 +05:30
#ifdef SHADOWGRP
if (is_shadowgrp) {
if (sgr_lock () == 0) {
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, sgr_dbname ());
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"locking /etc/gshadow",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
sgr_locked = true;
}
#endif
if (gr_open (O_RDWR) == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: cannot open %s\n"), Prog, gr_dbname ());
SYSLOG ((LOG_WARN, "cannot open %s", gr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"opening /etc/group",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
2007-12-28 03:13:29 +05:30
#ifdef SHADOWGRP
if (is_shadowgrp && (sgr_open (O_RDWR) == 0)) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: cannot open %s\n"), Prog, sgr_dbname ());
SYSLOG ((LOG_WARN, "cannot open %s", sgr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"opening /etc/gshadow",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
#endif
}
/*
* close_files - close and unlock the group databases
*
* This cause any changes in the databases to be committed.
*
* It will call exit in case of error.
*/
static void close_files (void)
{
if (gr_close () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: failure while writing changes to %s\n"), Prog, gr_dbname ());
SYSLOG ((LOG_ERR, "failure while writing changes to %s", gr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"rewriting /etc/group",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
2007-12-28 03:13:29 +05:30
#ifdef SHADOWGRP
if (is_shadowgrp) {
if (sgr_close () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: failure while writing changes to %s\n"), Prog, sgr_dbname ());
SYSLOG ((LOG_ERR, "failure while writing changes to %s", sgr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"rewriting /etc/gshadow",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
if (sgr_unlock () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, sgr_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", sgr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"unlocking gshadow file",
group, AUDIT_NO_ID, 0);
#endif
/* continue */
}
sgr_locked = false;
}
#endif
if (gr_unlock () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, gr_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", gr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"unlocking group file",
group, AUDIT_NO_ID, 0);
#endif
/* continue */
}
gr_locked = false;
}
/*
* check_perms - check if the user is allowed to change the password of
* the specified group.
*
* It only returns if the user is allowed.
*/
#ifdef SHADOWGRP
static void check_perms (const struct group *gr, const struct sgrp *sg)
#else
static void check_perms (const struct group *gr)
#endif
{
#ifdef SHADOWGRP
if (is_shadowgrp) {
2008-02-27 00:47:20 +05:30
/*
* The policy here for changing a group is that
* 1) you must be root or
* 2) you must be listed as an administrative member.
* Administrative members can do anything to a group that
* the root user can.
*/
if (!amroot && !is_on_list (sg->sg_adm, myname)) {
#ifdef WITH_AUDIT
2008-02-27 00:47:20 +05:30
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"modify group",
group, AUDIT_NO_ID, 0);
#endif
2008-02-27 00:47:20 +05:30
failure ();
}
} else
#endif /* ! SHADOWGRP */
{
#ifdef FIRST_MEMBER_IS_ADMIN
2008-02-27 00:47:20 +05:30
/*
* The policy here for changing a group is that
* 1) you must be root or
* 2) you must be the first listed member of the group.
* The first listed member of a group can do anything to
* that group that the root user can. The rationale for
* this hack is that the FIRST user is probably the most
* important user in this entire group.
*
* This feature enabled by default could be a security
* problem when installed on existing systems where the
* first group member might be just a normal user.
* --marekm
*/
if (!amroot) {
if (gr->gr_mem[0] == (char *) 0) {
#ifdef WITH_AUDIT
2008-02-27 00:47:20 +05:30
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"modifying group",
group, AUDIT_NO_ID, 0);
#endif
2008-02-27 00:47:20 +05:30
failure ();
}
2008-02-27 00:47:20 +05:30
if (strcmp (gr->gr_mem[0], myname) != 0) {
#ifdef WITH_AUDIT
2008-02-27 00:47:20 +05:30
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"modifying group",
myname, AUDIT_NO_ID, 0);
#endif
2008-02-27 00:47:20 +05:30
failure ();
}
}
#else /* ! FIRST_MEMBER_IS_ADMIN */
2008-02-27 00:47:20 +05:30
if (!amroot) {
#ifdef WITH_AUDIT
2008-02-27 00:47:20 +05:30
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"modifying group",
group, AUDIT_NO_ID, 0);
#endif
2008-02-27 00:47:20 +05:30
failure ();
}
#endif
}
}
/*
* update_group - Update the group information in the databases
*/
#ifdef SHADOWGRP
static void update_group (struct group *gr, struct sgrp *sg)
#else
static void update_group (struct group *gr)
#endif
{
if (gr_update (gr) == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr,
_("%s: cannot update entry '%s' in %s\n"),
Prog, gr->gr_name, gr_dbname ());
SYSLOG ((LOG_WARN, "cannot update entry '%s' in %s", gr->gr_name, gr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"updating /etc/group",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
#ifdef SHADOWGRP
if (is_shadowgrp && (sgr_update (sg) == 0)) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: cannot update entry '%s' in %s\n"), Prog, sg->sg_name, sgr_dbname ());
SYSLOG ((LOG_WARN, "cannot update entry '%s' in %s", sg->sg_name, sgr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"updating /etc/gshadow",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
#endif
}
/*
* get_group - get the current information for the group
*
* The information are copied in group structure(s) so that they can be
* modified later.
*
* Note: If !is_shadowgrp, *sg will not be initialized.
*/
#ifdef SHADOWGRP
static void get_group (struct group *gr, struct sgrp *sg)
#else
static void get_group (struct group *gr)
#endif
{
struct group const*tmpgr = NULL;
#ifdef SHADOWGRP
struct sgrp const*tmpsg = NULL;
#endif
if (gr_open (O_RDONLY) == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: cannot open %s\n"), Prog, gr_dbname ());
SYSLOG ((LOG_WARN, "cannot open %s", gr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"opening /etc/group",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
2007-12-28 03:13:29 +05:30
tmpgr = gr_locate (group);
if (NULL == tmpgr) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: group '%s' does not exist in %s\n"), Prog, group, gr_dbname ());
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"group lookup",
group, AUDIT_NO_ID, 0);
#endif
failure ();
}
*gr = *tmpgr;
gr->gr_name = xstrdup (tmpgr->gr_name);
gr->gr_passwd = xstrdup (tmpgr->gr_passwd);
gr->gr_mem = dup_list (tmpgr->gr_mem);
if (gr_close () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr, _("%s: failure while writing changes to %s\n"), Prog, gr_dbname ());
SYSLOG ((LOG_ERR, "failure while writing changes to %s", gr_dbname ()));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"closing /etc/group",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
#ifdef SHADOWGRP
if (is_shadowgrp) {
2008-02-27 00:47:20 +05:30
if (sgr_open (O_RDONLY) == 0) {
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: cannot open %s\n"), Prog, sgr_dbmane ());
SYSLOG ((LOG_WARN, "cannot open %s", sgr_dbname ()));
#ifdef WITH_AUDIT
2008-02-27 00:47:20 +05:30
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"opening /etc/gshadow",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
2008-02-27 00:47:20 +05:30
}
tmpsg = sgr_locate (group);
if (NULL != tmpsg) {
*sg = *tmpsg;
sg->sg_name = xstrdup (tmpsg->sg_name);
sg->sg_passwd = xstrdup (tmpsg->sg_passwd);
sg->sg_mem = dup_list (tmpsg->sg_mem);
sg->sg_adm = dup_list (tmpsg->sg_adm);
} else {
sg->sg_name = xstrdup (group);
sg->sg_passwd = gr->gr_passwd;
gr->gr_passwd = SHADOW_PASSWD_STRING; /* XXX warning: const */
2008-02-27 00:47:20 +05:30
sg->sg_mem = dup_list (gr->gr_mem);
2008-02-27 00:47:20 +05:30
sg->sg_adm = (char **) xmalloc (sizeof (char *) * 2);
#ifdef FIRST_MEMBER_IS_ADMIN
2008-02-27 00:47:20 +05:30
if (sg->sg_mem[0]) {
sg->sg_adm[0] = xstrdup (sg->sg_mem[0]);
sg->sg_adm[1] = NULL;
} else
#endif
2008-02-27 00:47:20 +05:30
{
sg->sg_adm[0] = NULL;
}
2008-02-27 00:47:20 +05:30
}
if (sgr_close () == 0) {
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: failure while writing changes to %s\n"), Prog, sgr_dbname ());
SYSLOG ((LOG_ERR, "failure while writing changes to %s", sgr_dbname ()));
#ifdef WITH_AUDIT
2008-02-27 00:47:20 +05:30
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"closing /etc/gshadow",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
2008-02-27 00:47:20 +05:30
}
}
#endif /* SHADOWGRP */
}
/*
* change_passwd - change the group's password
*
* Get the new password from the user and update the password in the
* group's structure.
*
* It will call exit in case of error.
*/
#ifdef SHADOWGRP
static void change_passwd (struct group *gr, struct sgrp *sg)
#else
static void change_passwd (struct group *gr)
#endif
{
char *cp;
static char pass[BUFSIZ];
int retries;
/*
* A new password is to be entered and it must be encrypted, etc.
* The password will be prompted for twice, and both entries must be
* identical. There is no need to validate the old password since
* the invoker is either the group owner, or root.
*/
printf (_("Changing the password for group %s\n"), group);
for (retries = 0; retries < RETRIES; retries++) {
2007-12-28 03:13:29 +05:30
cp = getpass (_("New Password: "));
if (NULL == cp) {
fail_exit (1);
2007-12-28 02:58:50 +05:30
}
STRFCPY (pass, cp);
strzero (cp);
2007-12-28 03:13:29 +05:30
cp = getpass (_("Re-enter new password: "));
if (NULL == cp) {
fail_exit (1);
2007-12-28 02:58:50 +05:30
}
if (strcmp (pass, cp) == 0) {
strzero (cp);
break;
}
strzero (cp);
memzero (pass, sizeof pass);
if (retries + 1 < RETRIES) {
puts (_("They don't match; try again"));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing password",
group, AUDIT_NO_ID, 0);
#endif
}
}
if (retries == RETRIES) {
fprintf (stderr, _("%s: Try again later\n"), Prog);
fail_exit (1);
}
cp = pw_encrypt (pass, crypt_make_salt (NULL, NULL));
memzero (pass, sizeof pass);
#ifdef SHADOWGRP
2007-12-28 02:58:50 +05:30
if (is_shadowgrp) {
sg->sg_passwd = cp;
2007-12-28 02:58:50 +05:30
} else
#endif
2007-12-28 02:58:50 +05:30
{
gr->gr_passwd = cp;
2007-12-28 02:58:50 +05:30
}
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing password",
group, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "change the password for group %s by %s", group,
myname));
}
/*
* gpasswd - administer the /etc/group file
*
* -a user add user to the named group
* -d user remove user from the named group
* -r remove password from the named group
* -R restrict access to the named group
* -A user,... make list of users the administrative users
* -M user,... make list of users the group members
*/
int main (int argc, char **argv)
{
struct group grent;
#ifdef SHADOWGRP
struct sgrp sgent;
#endif
struct passwd *pw = NULL;
#ifdef WITH_AUDIT
audit_help_open ();
#endif
sanitize_env ();
(void) setlocale (LC_ALL, "");
(void) bindtextdomain (PACKAGE, LOCALEDIR);
(void) textdomain (PACKAGE);
/*
* Make a note of whether or not this command was invoked by root.
* This will be used to bypass certain checks later on. Also, set
* the real user ID to match the effective user ID. This will
* prevent the invoker from issuing signals which would interfer
* with this command.
*/
bywho = getuid ();
Prog = Basename (argv[0]);
OPENLOG ("gpasswd");
setbuf (stdout, NULL);
setbuf (stderr, NULL);
#ifdef SHADOWGRP
is_shadowgrp = sgr_file_present ();
#endif
/* Parse the options */
process_flags (argc, argv);
/*
* Determine the name of the user that invoked this command. This
* is really hit or miss because there are so many ways that command
* can be executed and so many ways to trip up the routines that
* report the user name.
*/
pw = get_my_pwent ();
if (NULL == pw) {
fputs (_("Who are you?\n"), stderr);
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"user lookup",
NULL, (unsigned int) bywho, 0);
#endif
failure ();
}
myname = xstrdup (pw->pw_name);
/*
* Replicate the group so it can be modified later on.
*/
#ifdef SHADOWGRP
get_group (&grent, &sgent);
#else
get_group (&grent);
#endif
/*
* Check if the user is allowed to change the password of this group.
*/
#ifdef SHADOWGRP
check_perms (&grent, &sgent);
#else
check_perms (&grent);
#endif
/*
* Removing a password is straight forward. Just set the password
* field to a "".
*/
if (rflg) {
grent.gr_passwd = ""; /* XXX warning: const */
#ifdef SHADOWGRP
sgent.sg_passwd = ""; /* XXX warning: const */
#endif
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"deleting group password",
group, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "remove password from group %s by %s",
2008-02-27 00:47:20 +05:30
group, myname));
goto output;
} else if (Rflg) {
/*
* Same thing for restricting the group. Set the password
* field to "!".
*/
grent.gr_passwd = "!"; /* XXX warning: const */
#ifdef SHADOWGRP
sgent.sg_passwd = "!"; /* XXX warning: const */
#endif
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"restrict access to group",
group, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "restrict access to group %s by %s",
group, myname));
goto output;
}
/*
* Adding a member to a member list is pretty straightforward as
* well. Call the appropriate routine and split.
*/
if (aflg) {
printf (_("Adding user %s to group %s\n"), user, group);
grent.gr_mem = add_list (grent.gr_mem, user);
#ifdef SHADOWGRP
if (is_shadowgrp) {
2008-02-27 00:47:20 +05:30
sgent.sg_mem = add_list (sgent.sg_mem, user);
}
#endif
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"adding group member",
user, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "add member %s to group %s by %s", user,
2008-02-27 00:47:20 +05:30
group, myname));
goto output;
}
/*
* Removing a member from the member list is the same deal as adding
* one, except the routine is different.
*/
if (dflg) {
bool removed = false;
printf (_("Removing user %s from group %s\n"), user, group);
if (is_on_list (grent.gr_mem, user)) {
removed = true;
grent.gr_mem = del_list (grent.gr_mem, user);
}
#ifdef SHADOWGRP
if (is_shadowgrp) {
2008-02-27 00:47:20 +05:30
if (is_on_list (sgent.sg_mem, user)) {
removed = true;
2008-02-27 00:47:20 +05:30
sgent.sg_mem = del_list (sgent.sg_mem, user);
}
}
#endif
if (!removed) {
fprintf (stderr, _("%s: user '%s' is not a member of '%s'\n"),
Prog, user, group);
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"deleting member",
user, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"deleting member",
user, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "remove member %s from group %s by %s",
2008-02-27 00:47:20 +05:30
user, group, myname));
goto output;
}
#ifdef SHADOWGRP
/*
* Replacing the entire list of administrators is simple. Check the
* list to make sure everyone is a real user. Then slap the new list
* in place.
*/
if (Aflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"setting group admin",
group, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "set administrators of %s to %s",
2008-02-27 00:47:20 +05:30
group, admins));
sgent.sg_adm = comma_to_list (admins);
2007-12-28 02:58:50 +05:30
if (!Mflg) {
goto output;
2007-12-28 02:58:50 +05:30
}
}
#endif
/*
* Replacing the entire list of members is simple. Check the list to
* make sure everyone is a real user. Then slap the new list in
* place.
*/
if (Mflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"setting group members",
group, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "set members of %s to %s", group, members));
#ifdef SHADOWGRP
sgent.sg_mem = comma_to_list (members);
#endif
grent.gr_mem = comma_to_list (members);
goto output;
}
/*
* If the password is being changed, the input and output must both
* be a tty. The typical keyboard signals are caught so the termio
* modes can be restored.
*/
if ((isatty (0) == 0) || (isatty (1) == 0)) {
fprintf (stderr, _("%s: Not a tty\n"), Prog);
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing password",
group, AUDIT_NO_ID, 0);
#endif
fail_exit (1);
}
catch_signals (0); /* save tty modes */
(void) signal (SIGHUP, catch_signals);
(void) signal (SIGINT, catch_signals);
(void) signal (SIGQUIT, catch_signals);
(void) signal (SIGTERM, catch_signals);
#ifdef SIGTSTP
(void) signal (SIGTSTP, catch_signals);
#endif
/* Prompt for the new password */
#ifdef SHADOWGRP
change_passwd (&grent, &sgent);
#else
change_passwd (&grent);
#endif
/*
* This is the common arrival point to output the new group file.
* The freshly crafted entry is in allocated space. The group file
* will be locked and opened for writing. The new entry will be
* output, etc.
*/
output:
if (setuid (0) != 0) {
fputs (_("Cannot change ID to root.\n"), stderr);
SYSLOG ((LOG_ERR, "can't setuid(0)"));
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing id to root",
group, AUDIT_NO_ID, 0);
#endif
closelog ();
fail_exit (1);
}
pwd_init ();
open_files ();
#ifdef SHADOWGRP
update_group (&grent, &sgent);
#else
update_group (&grent);
#endif
close_files ();
nscd_flush_cache ("group");
exit (E_SUCCESS);
}