shadow/src/usermod.c

2359 lines
64 KiB
C
Raw Normal View History

/*
* Copyright (c) 1991 - 1994, Julianne Frances Haugh
* Copyright (c) 1996 - 2000, Marek Michałkiewicz
* Copyright (c) 2000 - 2006, Tomasz Kłoczko
* Copyright (c) 2007 - 2011, Nicolas François
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the copyright holders or contributors may not be used to
* endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <config.h>
#ident "$Id$"
2016-05-15 19:19:39 +05:30
#include <assert.h>
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <grp.h>
#include <lastlog.h>
#include <pwd.h>
#ifdef ACCT_TOOLS_SETUID
#ifdef USE_PAM
#include "pam_defs.h"
#endif /* USE_PAM */
#endif /* ACCT_TOOLS_SETUID */
#include <stdio.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <time.h>
#include "chkname.h"
#include "defines.h"
#include "faillog.h"
#include "getdef.h"
#include "groupio.h"
#include "nscd.h"
Flush sssd caches in addition to nscd caches Some distributions, notably Fedora, have the following order of nsswitch modules by default: passwd: sss files group: sss files The advantage of serving local users through SSSD is that the nss_sss module has a fast mmapped-cache that speeds up NSS lookups compared to accessing the disk an opening the files on each NSS request. Traditionally, this has been done with the help of nscd, but using nscd in parallel with sssd is cumbersome, as both SSSD and nscd use their own independent caching, so using nscd in setups where sssd is also serving users from some remote domain (LDAP, AD, ...) can result in a bit of unpredictability. More details about why Fedora chose to use sss before files can be found on e.g.: https://fedoraproject.org//wiki/Changes/SSSDCacheForLocalUsers or: https://docs.pagure.org/SSSD.sssd/design_pages/files_provider.html Now, even though sssd watches the passwd and group files with the help of inotify, there can still be a small window where someone requests a user or a group, finds that it doesn't exist, adds the entry and checks again. Without some support in shadow-utils that would explicitly drop the sssd caches, the inotify watch can fire a little late, so a combination of commands like this: getent passwd user || useradd user; getent passwd user can result in the second getent passwd not finding the newly added user as the racy behaviour might still return the cached negative hit from the first getent passwd. This patch more or less copies the already existing support that shadow-utils had for dropping nscd caches, except using the "sss_cache" tool that sssd ships.
2018-09-12 17:52:11 +05:30
#include "sssd.h"
#include "prototypes.h"
#include "pwauth.h"
#include "pwio.h"
#ifdef SHADOWGRP
#include "sgroupio.h"
#endif
#include "shadowio.h"
#ifdef ENABLE_SUBIDS
#include "subordinateio.h"
#endif /* ENABLE_SUBIDS */
#ifdef WITH_TCB
#include "tcbfuncs.h"
#endif
/*
* exit status values
* for E_GRP_UPDATE and E_NOSPACE (not used yet), other update requests
* will be implemented (as documented in the Solaris 2.x man page).
*/
/*@-exitarg@*/
#define E_SUCCESS 0 /* success */
#define E_PW_UPDATE 1 /* can't update password file */
#define E_USAGE 2 /* invalid command syntax */
#define E_BAD_ARG 3 /* invalid argument to option */
#define E_UID_IN_USE 4 /* UID already in use (and no -o) */
/* #define E_BAD_PWFILE 5 passwd file contains errors */
#define E_NOTFOUND 6 /* specified user/group doesn't exist */
#define E_USER_BUSY 8 /* user to modify is logged in */
#define E_NAME_IN_USE 9 /* username already in use */
#define E_GRP_UPDATE 10 /* can't update group file */
/* #define E_NOSPACE 11 insufficient space to move home dir */
#define E_HOMEDIR 12 /* unable to complete home dir move */
#define E_SE_UPDATE 13 /* can't update SELinux user mapping */
#ifdef ENABLE_SUBIDS
#define E_SUB_UID_UPDATE 16 /* can't update the subordinate uid file */
#define E_SUB_GID_UPDATE 18 /* can't update the subordinate gid file */
#endif /* ENABLE_SUBIDS */
#define VALID(s) (strcspn (s, ":\n") == strlen (s))
/*
* Global variables
*/
const char *Prog;
static char *user_name;
static char *user_newname;
static char *user_pass;
static uid_t user_id;
static uid_t user_newid;
static gid_t user_gid;
static gid_t user_newgid;
static char *user_comment;
static char *user_newcomment;
static char *user_home;
static char *user_newhome;
static char *user_shell;
#ifdef WITH_SELINUX
static const char *user_selinux = "";
#endif /* WITH_SELINUX */
static char *user_newshell;
static long user_expire;
static long user_newexpire;
static long user_inactive;
static long user_newinactive;
static long sys_ngroups;
static char **user_groups; /* NULL-terminated list */
2016-05-15 19:19:39 +05:30
static const char* prefix = "";
static char* prefix_user_home = NULL;
static char* prefix_user_newhome = NULL;
static bool
aflg = false, /* append to existing secondary group set */
cflg = false, /* new comment (GECOS) field */
dflg = false, /* new home directory */
eflg = false, /* days since 1970-01-01 when account becomes expired */
fflg = false, /* days until account with expired password is locked */
gflg = false, /* new primary group ID */
Gflg = false, /* new secondary group set */
Lflg = false, /* lock the password */
lflg = false, /* new user name */
mflg = false, /* create user's home directory if it doesn't exist */
oflg = false, /* permit non-unique user ID to be specified with -u */
pflg = false, /* new encrypted password */
sflg = false, /* new shell program */
#ifdef WITH_SELINUX
Zflg = false, /* new selinux user */
#endif
#ifdef ENABLE_SUBIDS
vflg = false, /* add subordinate uids */
Vflg = false, /* delete subordinate uids */
wflg = false, /* add subordinate gids */
Wflg = false, /* delete subordinate gids */
#endif /* ENABLE_SUBIDS */
uflg = false, /* specify new user ID */
Uflg = false; /* unlock the password */
static bool is_shadow_pwd;
#ifdef SHADOWGRP
static bool is_shadow_grp;
#endif
#ifdef ENABLE_SUBIDS
static bool is_sub_uid = false;
static bool is_sub_gid = false;
#endif /* ENABLE_SUBIDS */
static bool pw_locked = false;
static bool spw_locked = false;
static bool gr_locked = false;
#ifdef SHADOWGRP
static bool sgr_locked = false;
#endif
#ifdef ENABLE_SUBIDS
static bool sub_uid_locked = false;
static bool sub_gid_locked = false;
#endif /* ENABLE_SUBIDS */
/* local function prototypes */
static void date_to_str (/*@unique@*//*@out@*/char *buf, size_t maxsize,
long int date);
static int get_groups (char *);
static /*@noreturn@*/void usage (int status);
static void new_pwent (struct passwd *);
static void new_spent (struct spwd *);
static /*@noreturn@*/void fail_exit (int);
static void update_group (void);
#ifdef SHADOWGRP
static void update_gshadow (void);
#endif
static void grp_update (void);
static void process_flags (int, char **);
static void close_files (void);
static void open_files (void);
static void usr_update (void);
static void move_home (void);
static void update_lastlog (void);
static void update_faillog (void);
#ifndef NO_MOVE_MAILBOX
static void move_mailbox (void);
#endif
static void date_to_str (/*@unique@*//*@out@*/char *buf, size_t maxsize,
long int date)
{
struct tm *tp;
if (date < 0) {
strncpy (buf, "never", maxsize);
} else {
time_t t = (time_t) date;
tp = gmtime (&t);
#ifdef HAVE_STRFTIME
strftime (buf, maxsize, "%Y-%m-%d", tp);
#else
(void) snprintf (buf, maxsize, "%04d-%02d-%02d",
tp->tm_year + 1900,
tp->tm_mon + 1,
tp->tm_mday);
#endif /* HAVE_STRFTIME */
}
buf[maxsize - 1] = '\0';
}
/*
* get_groups - convert a list of group names to an array of group IDs
*
* get_groups() takes a comma-separated list of group names and
* converts it to a NULL-terminated array. Any unknown group names are
* reported as errors.
*/
static int get_groups (char *list)
{
char *cp;
const struct group *grp;
int errors = 0;
int ngroups = 0;
/*
* Initialize the list to be empty
*/
user_groups[0] = (char *) 0;
if ('\0' == *list) {
return 0;
}
/*
* So long as there is some data to be converted, strip off each
* name and look it up. A mix of numerical and string values for
* group identifiers is permitted.
*/
do {
/*
* Strip off a single name from the list
*/
cp = strchr (list, ',');
if (NULL != cp) {
*cp = '\0';
cp++;
}
/*
* Names starting with digits are treated as numerical GID
* values, otherwise the string is looked up as is.
*/
2016-05-15 19:19:39 +05:30
grp = prefix_getgr_nam_gid (list);
/*
* There must be a match, either by GID value or by
* string name.
*/
if (NULL == grp) {
fprintf (stderr, _("%s: group '%s' does not exist\n"),
Prog, list);
errors++;
}
list = cp;
/*
* If the group doesn't exist, don't dump core. Instead,
* try the next one. --marekm
*/
if (NULL == grp) {
continue;
}
#ifdef USE_NIS
/*
* Don't add this group if they are an NIS group. Tell the
* user to go to the server for this group.
*/
if (__isgrNIS ()) {
fprintf (stderr,
_("%s: group '%s' is a NIS group.\n"),
Prog, grp->gr_name);
gr_free ((struct group *)grp);
continue;
}
#endif
if (ngroups == sys_ngroups) {
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: too many groups specified (max %d).\n"),
Prog, ngroups);
gr_free ((struct group *)grp);
break;
}
/*
* Add the group name to the user's list of groups.
*/
user_groups[ngroups++] = xstrdup (grp->gr_name);
gr_free ((struct group *)grp);
} while (NULL != list);
user_groups[ngroups] = (char *) 0;
/*
* Any errors in finding group names are fatal
*/
if (0 != errors) {
return -1;
}
return 0;
}
#ifdef ENABLE_SUBIDS
struct ulong_range
{
unsigned long first;
unsigned long last;
};
static struct ulong_range getulong_range(const char *str)
{
struct ulong_range result = { .first = ULONG_MAX, .last = 0 };
long long first, last;
char *pos;
errno = 0;
first = strtoll(str, &pos, 10);
if (('\0' == *str) || ('-' != *pos ) || (ERANGE == errno) ||
(first != (unsigned long int)first))
goto out;
errno = 0;
last = strtoll(pos + 1, &pos, 10);
if (('\0' != *pos ) || (ERANGE == errno) ||
(last != (unsigned long int)last))
goto out;
if (first > last)
goto out;
result.first = (unsigned long int)first;
result.last = (unsigned long int)last;
out:
return result;
}
struct ulong_range_list_entry {
struct ulong_range_list_entry *next;
struct ulong_range range;
};
static struct ulong_range_list_entry *add_sub_uids = NULL, *del_sub_uids = NULL;
static struct ulong_range_list_entry *add_sub_gids = NULL, *del_sub_gids = NULL;
static int prepend_range(const char *str, struct ulong_range_list_entry **head)
{
struct ulong_range range;
struct ulong_range_list_entry *entry;
range = getulong_range(str);
if (range.first > range.last)
return 0;
entry = malloc(sizeof(*entry));
if (!entry) {
fprintf (stderr,
_("%s: failed to allocate memory: %s\n"),
Prog, strerror (errno));
return 0;
}
entry->next = *head;
entry->range = range;
*head = entry;
return 1;
}
#endif /* ENABLE_SUBIDS */
/*
* usage - display usage message and exit
*/
static /*@noreturn@*/void usage (int status)
{
FILE *usageout = (E_SUCCESS != status) ? stderr : stdout;
(void) fprintf (usageout,
_("Usage: %s [options] LOGIN\n"
"\n"
"Options:\n"),
Prog);
(void) fputs (_(" -c, --comment COMMENT new value of the GECOS field\n"), usageout);
(void) fputs (_(" -d, --home HOME_DIR new home directory for the user account\n"), usageout);
(void) fputs (_(" -e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE\n"), usageout);
(void) fputs (_(" -f, --inactive INACTIVE set password inactive after expiration\n"
" to INACTIVE\n"), usageout);
(void) fputs (_(" -g, --gid GROUP force use GROUP as new primary group\n"), usageout);
(void) fputs (_(" -G, --groups GROUPS new list of supplementary GROUPS\n"), usageout);
(void) fputs (_(" -a, --append append the user to the supplemental GROUPS\n"
" mentioned by the -G option without removing\n"
2017-09-19 23:42:42 +05:30
" the user from other groups\n"), usageout);
(void) fputs (_(" -h, --help display this help message and exit\n"), usageout);
(void) fputs (_(" -l, --login NEW_LOGIN new value of the login name\n"), usageout);
(void) fputs (_(" -L, --lock lock the user account\n"), usageout);
(void) fputs (_(" -m, --move-home move contents of the home directory to the\n"
" new location (use only with -d)\n"), usageout);
(void) fputs (_(" -o, --non-unique allow using duplicate (non-unique) UID\n"), usageout);
(void) fputs (_(" -p, --password PASSWORD use encrypted password for the new password\n"), usageout);
(void) fputs (_(" -R, --root CHROOT_DIR directory to chroot into\n"), usageout);
2016-05-15 19:19:39 +05:30
(void) fputs (_(" -P, --prefix PREFIX_DIR prefix directory where are located the /etc/* files\n"), usageout);
(void) fputs (_(" -s, --shell SHELL new login shell for the user account\n"), usageout);
(void) fputs (_(" -u, --uid UID new UID for the user account\n"), usageout);
(void) fputs (_(" -U, --unlock unlock the user account\n"), usageout);
#ifdef ENABLE_SUBIDS
(void) fputs (_(" -v, --add-subuids FIRST-LAST add range of subordinate uids\n"), usageout);
2013-08-07 01:59:40 +05:30
(void) fputs (_(" -V, --del-subuids FIRST-LAST remove range of subordinate uids\n"), usageout);
(void) fputs (_(" -w, --add-subgids FIRST-LAST add range of subordinate gids\n"), usageout);
2013-08-07 01:59:40 +05:30
(void) fputs (_(" -W, --del-subgids FIRST-LAST remove range of subordinate gids\n"), usageout);
#endif /* ENABLE_SUBIDS */
#ifdef WITH_SELINUX
(void) fputs (_(" -Z, --selinux-user SEUSER new SELinux user mapping for the user account\n"), usageout);
#endif /* WITH_SELINUX */
(void) fputs ("\n", usageout);
exit (status);
}
/*
* update encrypted password string (for both shadow and non-shadow
* passwords)
*/
static char *new_pw_passwd (char *pw_pass)
{
if (Lflg && ('!' != pw_pass[0])) {
char *buf = xmalloc (strlen (pw_pass) + 2);
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"updating passwd",
user_newname, (unsigned int) user_newid, 0);
#endif
SYSLOG ((LOG_INFO, "lock user '%s' password", user_newname));
strcpy (buf, "!");
strcat (buf, pw_pass);
pw_pass = buf;
} else if (Uflg && pw_pass[0] == '!') {
char *s;
if (pw_pass[1] == '\0') {
fprintf (stderr,
_("%s: unlocking the user's password would result in a passwordless account.\n"
"You should set a password with usermod -p to unlock this user's password.\n"),
Prog);
return pw_pass;
}
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"updating password",
user_newname, (unsigned int) user_newid, 0);
#endif
SYSLOG ((LOG_INFO, "unlock user '%s' password", user_newname));
s = pw_pass;
while ('\0' != *s) {
*s = *(s + 1);
s++;
}
} else if (pflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing password",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO, "change user '%s' password", user_newname));
pw_pass = xstrdup (user_pass);
}
return pw_pass;
}
/*
* new_pwent - initialize the values in a password file entry
*
* new_pwent() takes all of the values that have been entered and fills
* in a (struct passwd) with them.
*/
static void new_pwent (struct passwd *pwent)
{
if (lflg) {
if (pw_locate (user_newname) != NULL) {
/* This should never happen.
* It was already checked that the user doesn't
* exist on the system.
*/
fprintf (stderr,
_("%s: user '%s' already exists in %s\n"),
Prog, user_newname, pw_dbname ());
fail_exit (E_NAME_IN_USE);
}
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing name",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO,
"change user name '%s' to '%s'",
pwent->pw_name, user_newname));
pwent->pw_name = xstrdup (user_newname);
}
/* Update the password in passwd if there is no shadow file or if
* the password is currently in passwd (pw_passwd != "x").
* We do not force the usage of shadow passwords if they are not
* used for this account.
*/
if ( (!is_shadow_pwd)
|| (strcmp (pwent->pw_passwd, SHADOW_PASSWD_STRING) != 0)) {
pwent->pw_passwd = new_pw_passwd (pwent->pw_passwd);
}
if (uflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing uid",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO,
"change user '%s' UID from '%d' to '%d'",
pwent->pw_name, pwent->pw_uid, user_newid));
pwent->pw_uid = user_newid;
}
if (gflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing primary group",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO,
"change user '%s' GID from '%d' to '%d'",
pwent->pw_name, pwent->pw_gid, user_newgid));
pwent->pw_gid = user_newgid;
}
if (cflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing comment",
user_newname, (unsigned int) user_newid, 1);
#endif
pwent->pw_gecos = user_newcomment;
}
if (dflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing home directory",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO,
"change user '%s' home from '%s' to '%s'",
pwent->pw_name, pwent->pw_dir, user_newhome));
pwent->pw_dir = user_newhome;
}
if (sflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing user shell",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO,
"change user '%s' shell from '%s' to '%s'",
pwent->pw_name, pwent->pw_shell, user_newshell));
pwent->pw_shell = user_newshell;
}
}
/*
* new_spent - initialize the values in a shadow password file entry
*
* new_spent() takes all of the values that have been entered and fills
* in a (struct spwd) with them.
*/
static void new_spent (struct spwd *spent)
{
if (lflg) {
if (spw_locate (user_newname) != NULL) {
fprintf (stderr,
_("%s: user '%s' already exists in %s\n"),
Prog, user_newname, spw_dbname ());
fail_exit (E_NAME_IN_USE);
}
spent->sp_namp = xstrdup (user_newname);
}
if (fflg) {
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing inactive days",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO,
"change user '%s' inactive from '%ld' to '%ld'",
spent->sp_namp, spent->sp_inact, user_newinactive));
spent->sp_inact = user_newinactive;
}
if (eflg) {
/* log dates rather than numbers of days. */
char new_exp[16], old_exp[16];
2008-02-04 03:23:30 +05:30
date_to_str (new_exp, sizeof(new_exp),
user_newexpire * DAY);
2008-02-04 03:23:30 +05:30
date_to_str (old_exp, sizeof(old_exp),
user_expire * DAY);
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing expiration date",
user_newname, (unsigned int) user_newid, 1);
#endif
SYSLOG ((LOG_INFO,
"change user '%s' expiration from '%s' to '%s'",
spent->sp_namp, old_exp, new_exp));
spent->sp_expire = user_newexpire;
}
/* Always update the shadowed password if there is a shadow entry
* (even if shadowed passwords might not be enabled for this
* account (pw_passwd != "x")).
* It seems better to update the password in both places in case a
* shadow and a non shadow entry exist.
* This might occur if:
* + there were already both entries
* + aging has been requested
*/
spent->sp_pwdp = new_pw_passwd (spent->sp_pwdp);
if (pflg) {
spent->sp_lstchg = (long) gettime () / SCALE;
if (0 == spent->sp_lstchg) {
/* Better disable aging than requiring a password
* change. */
spent->sp_lstchg = -1;
}
}
}
/*
* fail_exit - exit with an error code after unlocking files
*/
static /*@noreturn@*/void fail_exit (int code)
{
if (gr_locked) {
if (gr_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, gr_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", gr_dbname ()));
/* continue */
}
}
#ifdef SHADOWGRP
if (sgr_locked) {
if (sgr_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, sgr_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", sgr_dbname ()));
/* continue */
}
}
#endif
if (spw_locked) {
if (spw_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, spw_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", spw_dbname ()));
/* continue */
}
}
if (pw_locked) {
if (pw_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, pw_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", pw_dbname ()));
/* continue */
}
}
#ifdef ENABLE_SUBIDS
if (sub_uid_locked) {
if (sub_uid_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, sub_uid_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", sub_uid_dbname ()));
/* continue */
}
}
if (sub_gid_locked) {
if (sub_gid_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, sub_gid_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", sub_gid_dbname ()));
/* continue */
}
}
#endif /* ENABLE_SUBIDS */
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"modifying account",
user_name, AUDIT_NO_ID, 0);
#endif
exit (code);
}
static void update_group (void)
{
bool is_member;
bool was_member;
bool changed;
const struct group *grp;
struct group *ngrp;
changed = false;
/*
* Scan through the entire group file looking for the groups that
* the user is a member of.
*/
while ((grp = gr_next ()) != NULL) {
/*
* See if the user specified this group as one of their
* concurrent groups.
*/
was_member = is_on_list (grp->gr_mem, user_name);
is_member = Gflg && ( (was_member && aflg)
|| is_on_list (user_groups, grp->gr_name));
if (!was_member && !is_member) {
continue;
}
ngrp = __gr_dup (grp);
if (NULL == ngrp) {
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: Out of memory. Cannot update %s.\n"),
Prog, gr_dbname ());
fail_exit (E_GRP_UPDATE);
}
if (was_member) {
if ((!Gflg) || is_member) {
/* User was a member and is still a member
* of this group.
* But the user might have been renamed.
*/
if (lflg) {
ngrp->gr_mem = del_list (ngrp->gr_mem,
user_name);
ngrp->gr_mem = add_list (ngrp->gr_mem,
user_newname);
changed = true;
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing group member",
user_newname, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO,
"change '%s' to '%s' in group '%s'",
user_name, user_newname,
ngrp->gr_name));
}
} else {
/* User was a member but is no more a
* member of this group.
*/
ngrp->gr_mem = del_list (ngrp->gr_mem, user_name);
changed = true;
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"removing group member",
user_name, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO,
"delete '%s' from group '%s'",
user_name, ngrp->gr_name));
}
} else {
/* User was not a member but is now a member this
* group.
*/
ngrp->gr_mem = add_list (ngrp->gr_mem, user_newname);
changed = true;
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"adding user to group",
user_name, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "add '%s' to group '%s'",
user_newname, ngrp->gr_name));
}
if (!changed) {
continue;
}
changed = false;
if (gr_update (ngrp) == 0) {
fprintf (stderr,
_("%s: failed to prepare the new %s entry '%s'\n"),
Prog, gr_dbname (), ngrp->gr_name);
SYSLOG ((LOG_WARN, "failed to prepare the new %s entry '%s'", gr_dbname (), ngrp->gr_name));
fail_exit (E_GRP_UPDATE);
}
}
}
#ifdef SHADOWGRP
static void update_gshadow (void)
{
bool is_member;
bool was_member;
bool was_admin;
bool changed;
const struct sgrp *sgrp;
struct sgrp *nsgrp;
changed = false;
/*
* Scan through the entire shadow group file looking for the groups
* that the user is a member of.
*/
while ((sgrp = sgr_next ()) != NULL) {
/*
* See if the user was a member of this group
*/
was_member = is_on_list (sgrp->sg_mem, user_name);
/*
* See if the user was an administrator of this group
*/
was_admin = is_on_list (sgrp->sg_adm, user_name);
/*
* See if the user specified this group as one of their
* concurrent groups.
*/
is_member = Gflg && ( (was_member && aflg)
|| is_on_list (user_groups, sgrp->sg_name));
if (!was_member && !was_admin && !is_member) {
continue;
}
nsgrp = __sgr_dup (sgrp);
if (NULL == nsgrp) {
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: Out of memory. Cannot update %s.\n"),
Prog, sgr_dbname ());
fail_exit (E_GRP_UPDATE);
}
if (was_admin && lflg) {
/* User was an admin of this group but the user
* has been renamed.
*/
nsgrp->sg_adm = del_list (nsgrp->sg_adm, user_name);
nsgrp->sg_adm = add_list (nsgrp->sg_adm, user_newname);
changed = true;
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing admin name in shadow group",
user_name, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO,
"change admin '%s' to '%s' in shadow group '%s'",
user_name, user_newname, nsgrp->sg_name));
}
if (was_member) {
if ((!Gflg) || is_member) {
/* User was a member and is still a member
* of this group.
* But the user might have been renamed.
*/
if (lflg) {
nsgrp->sg_mem = del_list (nsgrp->sg_mem,
user_name);
nsgrp->sg_mem = add_list (nsgrp->sg_mem,
user_newname);
changed = true;
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing member in shadow group",
user_name, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO,
"change '%s' to '%s' in shadow group '%s'",
user_name, user_newname,
nsgrp->sg_name));
}
} else {
/* User was a member but is no more a
* member of this group.
*/
nsgrp->sg_mem = del_list (nsgrp->sg_mem, user_name);
changed = true;
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"removing user from shadow group",
user_name, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO,
"delete '%s' from shadow group '%s'",
user_name, nsgrp->sg_name));
}
} else if (is_member) {
/* User was not a member but is now a member this
* group.
*/
nsgrp->sg_mem = add_list (nsgrp->sg_mem, user_newname);
changed = true;
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"adding user to shadow group",
user_newname, AUDIT_NO_ID, 1);
#endif
SYSLOG ((LOG_INFO, "add '%s' to shadow group '%s'",
user_newname, nsgrp->sg_name));
}
if (!changed) {
continue;
}
changed = false;
/*
* Update the group entry to reflect the changes.
*/
if (sgr_update (nsgrp) == 0) {
fprintf (stderr,
_("%s: failed to prepare the new %s entry '%s'\n"),
Prog, sgr_dbname (), nsgrp->sg_name);
SYSLOG ((LOG_WARN, "failed to prepare the new %s entry '%s'",
sgr_dbname (), nsgrp->sg_name));
fail_exit (E_GRP_UPDATE);
}
}
}
#endif /* SHADOWGRP */
/*
* grp_update - add user to secondary group set
*
* grp_update() takes the secondary group set given in user_groups and
* adds the user to each group given by that set.
*/
static void grp_update (void)
{
update_group ();
#ifdef SHADOWGRP
if (is_shadow_grp) {
update_gshadow ();
}
#endif
}
/*
* process_flags - perform command line argument setting
*
* process_flags() interprets the command line arguments and sets the
* values that the user will be created with accordingly. The values
* are checked for sanity.
*/
static void process_flags (int argc, char **argv)
{
const struct group *grp;
bool anyflag = false;
{
/*
* Parse the command line options.
*/
int c;
static struct option long_options[] = {
{"append", no_argument, NULL, 'a'},
{"comment", required_argument, NULL, 'c'},
{"home", required_argument, NULL, 'd'},
{"expiredate", required_argument, NULL, 'e'},
{"inactive", required_argument, NULL, 'f'},
{"gid", required_argument, NULL, 'g'},
{"groups", required_argument, NULL, 'G'},
{"help", no_argument, NULL, 'h'},
{"login", required_argument, NULL, 'l'},
{"lock", no_argument, NULL, 'L'},
{"move-home", no_argument, NULL, 'm'},
{"non-unique", no_argument, NULL, 'o'},
{"password", required_argument, NULL, 'p'},
{"root", required_argument, NULL, 'R'},
2016-05-15 19:19:39 +05:30
{"prefix", required_argument, NULL, 'P'},
{"shell", required_argument, NULL, 's'},
{"uid", required_argument, NULL, 'u'},
{"unlock", no_argument, NULL, 'U'},
#ifdef ENABLE_SUBIDS
{"add-subuids", required_argument, NULL, 'v'},
{"del-subuids", required_argument, NULL, 'V'},
{"add-subgids", required_argument, NULL, 'w'},
{"del-subgids", required_argument, NULL, 'W'},
#endif /* ENABLE_SUBIDS */
#ifdef WITH_SELINUX
{"selinux-user", required_argument, NULL, 'Z'},
#endif /* WITH_SELINUX */
{NULL, 0, NULL, '\0'}
};
while ((c = getopt_long (argc, argv,
2016-05-15 19:19:39 +05:30
"ac:d:e:f:g:G:hl:Lmop:R:s:u:UP:"
#ifdef ENABLE_SUBIDS
"v:w:V:W:"
#endif /* ENABLE_SUBIDS */
#ifdef WITH_SELINUX
"Z:"
#endif /* WITH_SELINUX */
, long_options, NULL)) != -1) {
switch (c) {
case 'a':
aflg = true;
break;
case 'c':
if (!VALID (optarg)) {
fprintf (stderr,
_("%s: invalid field '%s'\n"),
Prog, optarg);
exit (E_BAD_ARG);
}
user_newcomment = optarg;
cflg = true;
break;
case 'd':
if (!VALID (optarg)) {
fprintf (stderr,
_("%s: invalid field '%s'\n"),
Prog, optarg);
exit (E_BAD_ARG);
}
dflg = true;
user_newhome = optarg;
break;
case 'e':
if ('\0' != *optarg) {
user_newexpire = strtoday (optarg);
if (user_newexpire < -1) {
fprintf (stderr,
_("%s: invalid date '%s'\n"),
Prog, optarg);
exit (E_BAD_ARG);
}
user_newexpire *= DAY / SCALE;
} else {
user_newexpire = -1;
}
eflg = true;
break;
case 'f':
if ( (getlong (optarg, &user_newinactive) == 0)
|| (user_newinactive < -1)) {
fprintf (stderr,
_("%s: invalid numeric argument '%s'\n"),
Prog, optarg);
exit (E_BAD_ARG);
}
fflg = true;
break;
case 'g':
grp = getgr_nam_gid (optarg);
if (NULL == grp) {
fprintf (stderr,
_("%s: group '%s' does not exist\n"),
Prog, optarg);
exit (E_NOTFOUND);
}
user_newgid = grp->gr_gid;
gflg = true;
break;
case 'G':
if (get_groups (optarg) != 0) {
exit (E_NOTFOUND);
}
Gflg = true;
break;
case 'h':
usage (E_SUCCESS);
/*@notreached@*/break;
case 'l':
if (!is_valid_user_name (optarg)) {
fprintf (stderr,
_("%s: invalid user name '%s'\n"),
Prog, optarg);
exit (E_BAD_ARG);
}
lflg = true;
user_newname = optarg;
break;
case 'L':
Lflg = true;
break;
case 'm':
mflg = true;
break;
case 'o':
oflg = true;
break;
case 'p':
user_pass = optarg;
pflg = true;
break;
case 'R': /* no-op, handled in process_root_flag () */
break;
2016-05-15 19:19:39 +05:30
case 'P': /* no-op, handled in process_prefix_flag () */
break;
case 's':
if (!VALID (optarg)) {
fprintf (stderr,
_("%s: invalid field '%s'\n"),
Prog, optarg);
exit (E_BAD_ARG);
}
user_newshell = optarg;
sflg = true;
break;
case 'u':
if ( (get_uid (optarg, &user_newid) ==0)
|| (user_newid == (uid_t)-1)) {
fprintf (stderr,
_("%s: invalid user ID '%s'\n"),
Prog, optarg);
exit (E_BAD_ARG);
}
uflg = true;
break;
case 'U':
Uflg = true;
break;
#ifdef ENABLE_SUBIDS
case 'v':
if (prepend_range (optarg, &add_sub_uids) == 0) {
fprintf (stderr,
_("%s: invalid subordinate uid range '%s'\n"),
Prog, optarg);
exit(E_BAD_ARG);
}
vflg = true;
break;
case 'V':
if (prepend_range (optarg, &del_sub_uids) == 0) {
fprintf (stderr,
_("%s: invalid subordinate uid range '%s'\n"),
Prog, optarg);
exit(E_BAD_ARG);
}
Vflg = true;
break;
case 'w':
if (prepend_range (optarg, &add_sub_gids) == 0) {
fprintf (stderr,
_("%s: invalid subordinate gid range '%s'\n"),
Prog, optarg);
exit(E_BAD_ARG);
}
wflg = true;
break;
case 'W':
if (prepend_range (optarg, &del_sub_gids) == 0) {
fprintf (stderr,
_("%s: invalid subordinate gid range '%s'\n"),
Prog, optarg);
exit(E_BAD_ARG);
}
Wflg = true;
break;
#endif /* ENABLE_SUBIDS */
#ifdef WITH_SELINUX
case 'Z':
2016-05-15 19:19:39 +05:30
if (prefix[0]) {
fprintf (stderr,
_("%s: -Z cannot be used with --prefix\n"),
Prog);
exit (E_BAD_ARG);
}
if (is_selinux_enabled () > 0) {
user_selinux = optarg;
Zflg = true;
} else {
fprintf (stderr,
_("%s: -Z requires SELinux enabled kernel\n"),
Prog);
exit (E_BAD_ARG);
}
break;
#endif /* WITH_SELINUX */
default:
usage (E_USAGE);
}
anyflag = true;
}
}
if (optind != argc - 1) {
usage (E_USAGE);
}
user_name = argv[argc - 1];
{
const struct passwd *pwd;
/* local, no need for xgetpwnam */
2016-05-15 19:19:39 +05:30
pwd = prefix_getpwnam (user_name);
if (NULL == pwd) {
fprintf (stderr,
_("%s: user '%s' does not exist\n"),
Prog, user_name);
exit (E_NOTFOUND);
}
user_id = pwd->pw_uid;
user_gid = pwd->pw_gid;
user_comment = xstrdup (pwd->pw_gecos);
user_home = xstrdup (pwd->pw_dir);
user_shell = xstrdup (pwd->pw_shell);
}
/* user_newname, user_newid, user_newgid can be used even when the
* options where not specified. */
if (!lflg) {
user_newname = user_name;
}
if (!uflg) {
user_newid = user_id;
}
if (!gflg) {
user_newgid = user_gid;
}
2016-05-15 19:19:39 +05:30
if(prefix[0]) {
size_t len = strlen(prefix) + strlen(user_home) + 2;
int wlen;
prefix_user_home = xmalloc(len);
wlen = snprintf(prefix_user_home, len, "%s/%s", prefix, user_home);
assert (wlen == (int) len -1);
if (user_newhome) {
len = strlen(prefix) + strlen(user_newhome) + 2;
prefix_user_newhome = xmalloc(len);
wlen = snprintf(prefix_user_newhome, len, "%s/%s", prefix, user_newhome);
assert (wlen == (int) len -1);
}
2016-05-15 19:19:39 +05:30
}
else {
prefix_user_home = user_home;
prefix_user_newhome = user_newhome;
}
#ifdef USE_NIS
/*
* Now make sure it isn't an NIS user.
*/
if (__ispwNIS ()) {
char *nis_domain;
char *nis_master;
fprintf (stderr,
_("%s: user %s is a NIS user\n"),
Prog, user_name);
if ( !yp_get_default_domain (&nis_domain)
&& !yp_master (nis_domain, "passwd.byname", &nis_master)) {
fprintf (stderr,
_("%s: %s is the NIS master\n"),
Prog, nis_master);
}
exit (E_NOTFOUND);
}
#endif
{
const struct spwd *spwd = NULL;
/* local, no need for xgetspnam */
2016-05-15 19:19:39 +05:30
if (is_shadow_pwd && ((spwd = prefix_getspnam (user_name)) != NULL)) {
user_expire = spwd->sp_expire;
user_inactive = spwd->sp_inact;
}
}
if (!anyflag) {
fprintf (stderr, _("%s: no options\n"), Prog);
usage (E_USAGE);
}
if (aflg && (!Gflg)) {
fprintf (stderr,
_("%s: %s flag is only allowed with the %s flag\n"),
Prog, "-a", "-G");
usage (E_USAGE);
}
if ((Lflg && (pflg || Uflg)) || (pflg && Uflg)) {
fprintf (stderr,
_("%s: the -L, -p, and -U flags are exclusive\n"),
Prog);
usage (E_USAGE);
}
if (oflg && !uflg) {
fprintf (stderr,
_("%s: %s flag is only allowed with the %s flag\n"),
Prog, "-o", "-u");
usage (E_USAGE);
}
if (mflg && !dflg) {
fprintf (stderr,
_("%s: %s flag is only allowed with the %s flag\n"),
Prog, "-m", "-d");
usage (E_USAGE);
}
if (user_newid == user_id) {
uflg = false;
oflg = false;
}
if (user_newgid == user_gid) {
gflg = false;
}
if ( (NULL != user_newshell)
&& (strcmp (user_newshell, user_shell) == 0)) {
sflg = false;
}
if (strcmp (user_newname, user_name) == 0) {
lflg = false;
}
if (user_newinactive == user_inactive) {
fflg = false;
}
if (user_newexpire == user_expire) {
eflg = false;
}
if ( (NULL != user_newhome)
&& (strcmp (user_newhome, user_home) == 0)) {
dflg = false;
mflg = false;
}
if ( (NULL != user_newcomment)
&& (strcmp (user_newcomment, user_comment) == 0)) {
cflg = false;
}
if (!(Uflg || uflg || sflg || pflg || mflg || Lflg ||
lflg || Gflg || gflg || fflg || eflg || dflg || cflg
#ifdef ENABLE_SUBIDS
|| vflg || Vflg || wflg || Wflg
#endif /* ENABLE_SUBIDS */
#ifdef WITH_SELINUX
|| Zflg
#endif /* WITH_SELINUX */
)) {
fprintf (stdout, _("%s: no changes\n"), Prog);
exit (E_SUCCESS);
}
if (!is_shadow_pwd && (eflg || fflg)) {
fprintf (stderr,
_("%s: shadow passwords required for -e and -f\n"),
Prog);
exit (E_USAGE);
}
* lib/prototypes.h, configure.in, libmisc/Makefile.am, libmisc/xgetXXbyYY.c, libmisc/xgetpwnam.c, libmisc/xgetpwuid.c, libmisc/xgetgrnam.c, libmisc/xgetgrgid.c, libmisc/xgetspnam.c: Added functions xgetpwnam(), xgetpwuid(), xgetgrnam(), xgetgrgid(), and xgetspnam(). They allocate memory for the returned structure and are more robust to successive calls. They are implemented with the libc's getxxyyy_r() functions if available. * libmisc/limits.c, libmisc/entry.c, libmisc/chowntty.c, libmisc/addgrps.c, libmisc/myname.c, libmisc/rlogin.c, libmisc/pwdcheck.c, src/newgrp.c, src/login_nopam.c, src/userdel.c, src/lastlog.c, src/grpck.c, src/gpasswd.c, src/newusers.c, src/chpasswd.c, src/chfn.c, src/groupmems.c, src/usermod.c, src/expiry.c, src/groupdel.c, src/chgpasswd.c, src/su.c, src/useradd.c, src/groupmod.c, src/passwd.c, src/pwck.c, src/groupadd.c, src/chage.c, src/login.c, src/suauth.c, src/faillog.c, src/groups.c, src/chsh.c, src/id.c: Review all the usage of one of the getpwnam(), getpwuid(), getgrnam(), getgrgid(), and getspnam() functions. It was noticed on http://bugs.debian.org/341230 that chfn and chsh use a passwd structure after calling a pam function, which result in using information from the passwd structure requested by pam, not the original one. It is much easier to use the new xget... functions to avoid these issues. I've checked which call to the original get... functions could be left (reducing the scope of the structure if possible), and I've left comments to ease future reviews (e.g. /* local, no need for xgetpwnam */). Note: the getpwent/getgrent calls should probably be checked also. * src/groupdel.c, src/expiry.c: Fix typos in comments. * src/groupmod.c: Re-indent. * libmisc/Makefile.am, lib/groupmem.c, lib/groupio.c, lib/pwmem.c, lib/pwio.c, lib/shadowmem.c, lib/shadowio.c: Move the __<xx>_dup functions (used by the xget... functions) from the <xx>io.c files to the new <xx>mem.c files. This avoid linking some utils against the SELinux library.
2007-11-19 04:45:26 +05:30
/* local, no need for xgetpwnam */
2016-05-15 19:19:39 +05:30
if (lflg && (prefix_getpwnam (user_newname) != NULL)) {
fprintf (stderr,
_("%s: user '%s' already exists\n"),
Prog, user_newname);
exit (E_NAME_IN_USE);
}
* lib/prototypes.h, configure.in, libmisc/Makefile.am, libmisc/xgetXXbyYY.c, libmisc/xgetpwnam.c, libmisc/xgetpwuid.c, libmisc/xgetgrnam.c, libmisc/xgetgrgid.c, libmisc/xgetspnam.c: Added functions xgetpwnam(), xgetpwuid(), xgetgrnam(), xgetgrgid(), and xgetspnam(). They allocate memory for the returned structure and are more robust to successive calls. They are implemented with the libc's getxxyyy_r() functions if available. * libmisc/limits.c, libmisc/entry.c, libmisc/chowntty.c, libmisc/addgrps.c, libmisc/myname.c, libmisc/rlogin.c, libmisc/pwdcheck.c, src/newgrp.c, src/login_nopam.c, src/userdel.c, src/lastlog.c, src/grpck.c, src/gpasswd.c, src/newusers.c, src/chpasswd.c, src/chfn.c, src/groupmems.c, src/usermod.c, src/expiry.c, src/groupdel.c, src/chgpasswd.c, src/su.c, src/useradd.c, src/groupmod.c, src/passwd.c, src/pwck.c, src/groupadd.c, src/chage.c, src/login.c, src/suauth.c, src/faillog.c, src/groups.c, src/chsh.c, src/id.c: Review all the usage of one of the getpwnam(), getpwuid(), getgrnam(), getgrgid(), and getspnam() functions. It was noticed on http://bugs.debian.org/341230 that chfn and chsh use a passwd structure after calling a pam function, which result in using information from the passwd structure requested by pam, not the original one. It is much easier to use the new xget... functions to avoid these issues. I've checked which call to the original get... functions could be left (reducing the scope of the structure if possible), and I've left comments to ease future reviews (e.g. /* local, no need for xgetpwnam */). Note: the getpwent/getgrent calls should probably be checked also. * src/groupdel.c, src/expiry.c: Fix typos in comments. * src/groupmod.c: Re-indent. * libmisc/Makefile.am, lib/groupmem.c, lib/groupio.c, lib/pwmem.c, lib/pwio.c, lib/shadowmem.c, lib/shadowio.c: Move the __<xx>_dup functions (used by the xget... functions) from the <xx>io.c files to the new <xx>mem.c files. This avoid linking some utils against the SELinux library.
2007-11-19 04:45:26 +05:30
/* local, no need for xgetpwuid */
2016-05-15 19:19:39 +05:30
if (uflg && !oflg && (prefix_getpwuid (user_newid) != NULL)) {
fprintf (stderr,
_("%s: UID '%lu' already exists\n"),
Prog, (unsigned long) user_newid);
exit (E_UID_IN_USE);
}
#ifdef ENABLE_SUBIDS
if ( (vflg || Vflg)
&& !is_sub_uid) {
fprintf (stderr,
_("%s: %s does not exist, you cannot use the flags %s or %s\n"),
Prog, sub_uid_dbname (), "-v", "-V");
exit (E_USAGE);
}
if ( (wflg || Wflg)
&& !is_sub_gid) {
fprintf (stderr,
_("%s: %s does not exist, you cannot use the flags %s or %s\n"),
Prog, sub_gid_dbname (), "-w", "-W");
exit (E_USAGE);
}
#endif /* ENABLE_SUBIDS */
}
/*
* close_files - close all of the files that were opened
*
* close_files() closes all of the files that were opened for this new
* user. This causes any modified entries to be written out.
*/
static void close_files (void)
{
if (pw_close () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr,
_("%s: failure while writing changes to %s\n"),
Prog, pw_dbname ());
SYSLOG ((LOG_ERR, "failure while writing changes to %s", pw_dbname ()));
fail_exit (E_PW_UPDATE);
}
if (is_shadow_pwd && (spw_close () == 0)) {
fprintf (stderr,
_("%s: failure while writing changes to %s\n"),
Prog, spw_dbname ());
SYSLOG ((LOG_ERR,
"failure while writing changes to %s",
spw_dbname ()));
fail_exit (E_PW_UPDATE);
}
if (Gflg || lflg) {
if (gr_close () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr,
_("%s: failure while writing changes to %s\n"),
Prog, gr_dbname ());
SYSLOG ((LOG_ERR,
"failure while writing changes to %s",
gr_dbname ()));
fail_exit (E_GRP_UPDATE);
}
#ifdef SHADOWGRP
if (is_shadow_grp) {
if (sgr_close () == 0) {
fprintf (stderr,
_("%s: failure while writing changes to %s\n"),
Prog, sgr_dbname ());
SYSLOG ((LOG_ERR,
"failure while writing changes to %s",
sgr_dbname ()));
fail_exit (E_GRP_UPDATE);
}
}
#endif
#ifdef SHADOWGRP
if (is_shadow_grp) {
if (sgr_unlock () == 0) {
fprintf (stderr,
_("%s: failed to unlock %s\n"),
Prog, sgr_dbname ());
SYSLOG ((LOG_ERR,
"failed to unlock %s",
sgr_dbname ()));
/* continue */
}
}
#endif
if (gr_unlock () == 0) {
fprintf (stderr,
_("%s: failed to unlock %s\n"),
Prog, gr_dbname ());
SYSLOG ((LOG_ERR,
"failed to unlock %s",
gr_dbname ()));
/* continue */
}
}
if (is_shadow_pwd) {
if (spw_unlock () == 0) {
fprintf (stderr,
_("%s: failed to unlock %s\n"),
Prog, spw_dbname ());
SYSLOG ((LOG_ERR,
"failed to unlock %s",
spw_dbname ()));
/* continue */
}
}
if (pw_unlock () == 0) {
fprintf (stderr,
_("%s: failed to unlock %s\n"),
Prog, pw_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", pw_dbname ()));
/* continue */
}
pw_locked = false;
spw_locked = false;
gr_locked = false;
#ifdef SHADOWGRP
sgr_locked = false;
#endif
#ifdef ENABLE_SUBIDS
if (vflg || Vflg) {
if (sub_uid_close () == 0) {
fprintf (stderr, _("%s: failure while writing changes to %s\n"), Prog, sub_uid_dbname ());
SYSLOG ((LOG_ERR, "failure while writing changes to %s", sub_uid_dbname ()));
fail_exit (E_SUB_UID_UPDATE);
}
if (sub_uid_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, sub_uid_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", sub_uid_dbname ()));
/* continue */
}
sub_uid_locked = false;
}
if (wflg || Wflg) {
if (sub_gid_close () == 0) {
fprintf (stderr, _("%s: failure while writing changes to %s\n"), Prog, sub_gid_dbname ());
SYSLOG ((LOG_ERR, "failure while writing changes to %s", sub_gid_dbname ()));
fail_exit (E_SUB_GID_UPDATE);
}
if (sub_gid_unlock () == 0) {
fprintf (stderr, _("%s: failed to unlock %s\n"), Prog, sub_gid_dbname ());
SYSLOG ((LOG_ERR, "failed to unlock %s", sub_gid_dbname ()));
/* continue */
}
sub_gid_locked = false;
}
#endif /* ENABLE_SUBIDS */
/*
* Close the DBM and/or flat files
*/
endpwent ();
endspent ();
endgrent ();
#ifdef SHADOWGRP
endsgent ();
#endif
}
/*
* open_files - lock and open the password files
*
* open_files() opens the two password files.
*/
static void open_files (void)
{
if (pw_lock () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, pw_dbname ());
fail_exit (E_PW_UPDATE);
}
pw_locked = true;
if (pw_open (O_CREAT | O_RDWR) == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr,
_("%s: cannot open %s\n"),
Prog, pw_dbname ());
fail_exit (E_PW_UPDATE);
}
if (is_shadow_pwd && (spw_lock () == 0)) {
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, spw_dbname ());
fail_exit (E_PW_UPDATE);
}
spw_locked = true;
if (is_shadow_pwd && (spw_open (O_CREAT | O_RDWR) == 0)) {
fprintf (stderr,
_("%s: cannot open %s\n"),
Prog, spw_dbname ());
fail_exit (E_PW_UPDATE);
}
if (Gflg || lflg) {
/*
* Lock and open the group file. This will load all of the
* group entries.
*/
if (gr_lock () == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, gr_dbname ());
fail_exit (E_GRP_UPDATE);
}
gr_locked = true;
if (gr_open (O_CREAT | O_RDWR) == 0) {
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
fprintf (stderr,
_("%s: cannot open %s\n"),
Prog, gr_dbname ());
fail_exit (E_GRP_UPDATE);
}
#ifdef SHADOWGRP
if (is_shadow_grp && (sgr_lock () == 0)) {
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, sgr_dbname ());
fail_exit (E_GRP_UPDATE);
}
sgr_locked = true;
if (is_shadow_grp && (sgr_open (O_CREAT | O_RDWR) == 0)) {
fprintf (stderr,
_("%s: cannot open %s\n"),
Prog, sgr_dbname ());
fail_exit (E_GRP_UPDATE);
}
#endif
}
#ifdef ENABLE_SUBIDS
if (vflg || Vflg) {
if (sub_uid_lock () == 0) {
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, sub_uid_dbname ());
fail_exit (E_SUB_UID_UPDATE);
}
sub_uid_locked = true;
if (sub_uid_open (O_CREAT | O_RDWR) == 0) {
fprintf (stderr,
_("%s: cannot open %s\n"),
Prog, sub_uid_dbname ());
fail_exit (E_SUB_UID_UPDATE);
}
}
if (wflg || Wflg) {
if (sub_gid_lock () == 0) {
fprintf (stderr,
_("%s: cannot lock %s; try again later.\n"),
Prog, sub_gid_dbname ());
fail_exit (E_SUB_GID_UPDATE);
}
sub_gid_locked = true;
if (sub_gid_open (O_CREAT | O_RDWR) == 0) {
fprintf (stderr,
_("%s: cannot open %s\n"),
Prog, sub_gid_dbname ());
fail_exit (E_SUB_GID_UPDATE);
}
}
#endif /* ENABLE_SUBIDS */
}
/*
* usr_update - create the user entries
*
* usr_update() creates the password file entries for this user and
* will update the group entries if required.
*/
static void usr_update (void)
{
struct passwd pwent;
const struct passwd *pwd;
struct spwd spent;
const struct spwd *spwd = NULL;
/*
* Locate the entry in /etc/passwd, which MUST exist.
*/
pwd = pw_locate (user_name);
if (NULL == pwd) {
fprintf (stderr,
_("%s: user '%s' does not exist in %s\n"),
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
Prog, user_name, pw_dbname ());
fail_exit (E_NOTFOUND);
}
pwent = *pwd;
new_pwent (&pwent);
/* If the shadow file does not exist, it won't be created */
if (is_shadow_pwd) {
spwd = spw_locate (user_name);
if (NULL != spwd) {
/* Update the shadow entry if it exists */
spent = *spwd;
new_spent (&spent);
} else if ( ( pflg
&& (strcmp (pwent.pw_passwd, SHADOW_PASSWD_STRING) == 0))
|| eflg || fflg) {
/* In some cases, we force the creation of a
* shadow entry:
* + new password requested and passwd indicates
* a shadowed password
* + aging information is requested
*/
memset (&spent, 0, sizeof spent);
spent.sp_namp = user_name;
/* The user explicitly asked for a shadow feature.
* Enable shadowed passwords for this new account.
*/
spent.sp_pwdp = xstrdup (pwent.pw_passwd);
pwent.pw_passwd = xstrdup (SHADOW_PASSWD_STRING);
spent.sp_lstchg = (long) gettime () / SCALE;
if (0 == spent.sp_lstchg) {
/* Better disable aging than
* requiring a password change */
spent.sp_lstchg = -1;
}
spent.sp_min = getdef_num ("PASS_MIN_DAYS", -1);
spent.sp_max = getdef_num ("PASS_MAX_DAYS", -1);
spent.sp_warn = getdef_num ("PASS_WARN_AGE", -1);
spent.sp_inact = -1;
spent.sp_expire = -1;
spent.sp_flag = SHADOW_SP_FLAG_UNSET;
new_spent (&spent);
spwd = &spent; /* entry needs to be committed */
}
}
if (lflg || uflg || gflg || cflg || dflg || sflg || pflg
|| Lflg || Uflg) {
if (pw_update (&pwent) == 0) {
fprintf (stderr,
_("%s: failed to prepare the new %s entry '%s'\n"),
Prog, pw_dbname (), pwent.pw_name);
fail_exit (E_PW_UPDATE);
}
if (lflg && (pw_remove (user_name) == 0)) {
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: cannot remove entry '%s' from %s\n"),
Prog, user_name, pw_dbname ());
fail_exit (E_PW_UPDATE);
}
}
if ((NULL != spwd) && (lflg || eflg || fflg || pflg || Lflg || Uflg)) {
if (spw_update (&spent) == 0) {
fprintf (stderr,
_("%s: failed to prepare the new %s entry '%s'\n"),
Prog, spw_dbname (), spent.sp_namp);
fail_exit (E_PW_UPDATE);
}
if (lflg && (spw_remove (user_name) == 0)) {
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: cannot remove entry '%s' from %s\n"),
Prog, user_name, spw_dbname ());
fail_exit (E_PW_UPDATE);
}
}
}
/*
* move_home - move the user's home directory
*
* move_home() moves the user's home directory to a new location. The
* files will be copied if the directory cannot simply be renamed.
*/
static void move_home (void)
{
struct stat sb;
2016-05-15 19:19:39 +05:30
if (access (prefix_user_newhome, F_OK) == 0) {
/*
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
* If the new home directory already exist, the user
* should not use -m.
*/
fprintf (stderr,
_("%s: directory %s exists\n"),
Prog, user_newhome);
fail_exit (E_HOMEDIR);
}
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
2016-05-15 19:19:39 +05:30
if (stat (prefix_user_home, &sb) == 0) {
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
/*
* Don't try to move it if it is not a directory
* (but /dev/null for example). --marekm
*/
if (!S_ISDIR (sb.st_mode)) {
fprintf (stderr,
_("%s: The previous home directory (%s) was "
"not a directory. It is not removed and no "
"home directories are created.\n"),
Prog, user_home);
fail_exit (E_HOMEDIR);
}
#ifdef WITH_AUDIT
if (uflg || gflg) {
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing home directory owner",
user_newname, (unsigned int) user_newid, 1);
}
#endif
2016-05-15 19:19:39 +05:30
if (rename (prefix_user_home, prefix_user_newhome) == 0) {
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
/* FIXME: rename above may have broken symlinks
* pointing to the user's home directory
* with an absolute path. */
2016-05-15 19:19:39 +05:30
if (chown_tree (prefix_user_newhome,
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
user_id, uflg ? user_newid : (uid_t)-1,
user_gid, gflg ? user_newgid : (gid_t)-1) != 0) {
fprintf (stderr,
_("%s: Failed to change ownership of the home directory"),
Prog);
fail_exit (E_HOMEDIR);
}
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"moving home directory",
user_newname, (unsigned int) user_newid,
1);
#endif
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
return;
} else {
if (EXDEV == errno) {
if (btrfs_is_subvolume (prefix_user_home) > 0) {
fprintf (stderr,
_("%s: error: cannot move subvolume from %s to %s - different device\n"),
Prog, prefix_user_home, prefix_user_newhome);
fail_exit (E_HOMEDIR);
}
2016-05-15 19:19:39 +05:30
if (copy_tree (prefix_user_home, prefix_user_newhome, true,
true,
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
user_id,
uflg ? user_newid : (uid_t)-1,
user_gid,
gflg ? user_newgid : (gid_t)-1) == 0) {
2016-05-15 19:19:39 +05:30
if (remove_tree (prefix_user_home, true) != 0) {
fprintf (stderr,
_("%s: warning: failed to completely remove old home directory %s"),
2016-05-15 19:19:39 +05:30
Prog, prefix_user_home);
}
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK,
Prog,
"moving home directory",
user_newname,
(unsigned int) user_newid,
1);
#endif
return;
}
2016-05-15 19:19:39 +05:30
(void) remove_tree (prefix_user_newhome, true);
}
fprintf (stderr,
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
_("%s: cannot rename directory %s to %s\n"),
2016-05-15 19:19:39 +05:30
Prog, prefix_user_home, prefix_user_newhome);
fail_exit (E_HOMEDIR);
}
}
}
/*
* update_lastlog - update the lastlog file
*
* Relocate the "lastlog" entries for the user. The old entry is
* left alone in case the UID was shared. It doesn't hurt anything
* to just leave it be.
*/
static void update_lastlog (void)
{
struct lastlog ll;
int fd;
off_t off_uid = (off_t) user_id * sizeof ll;
off_t off_newuid = (off_t) user_newid * sizeof ll;
uid_t max_uid;
if (access (LASTLOG_FILE, F_OK) != 0) {
return;
}
max_uid = (uid_t) getdef_ulong ("LASTLOG_MAX_UID", 0xFFFFFFFFUL);
if (user_newid > max_uid) {
/* do not touch lastlog for large uids */
return;
}
fd = open (LASTLOG_FILE, O_RDWR);
if (-1 == fd) {
fprintf (stderr,
_("%s: failed to copy the lastlog entry of user %lu to user %lu: %s\n"),
Prog, (unsigned long) user_id, (unsigned long) user_newid, strerror (errno));
return;
}
if ( (lseek (fd, off_uid, SEEK_SET) == off_uid)
&& (read (fd, &ll, sizeof ll) == (ssize_t) sizeof ll)) {
/* Copy the old entry to its new location */
if ( (lseek (fd, off_newuid, SEEK_SET) != off_newuid)
|| (write (fd, &ll, sizeof ll) != (ssize_t) sizeof ll)
|| (fsync (fd) != 0)
|| (close (fd) != 0)) {
fprintf (stderr,
_("%s: failed to copy the lastlog entry of user %lu to user %lu: %s\n"),
Prog, (unsigned long) user_id, (unsigned long) user_newid, strerror (errno));
}
} else {
/* Assume lseek or read failed because there is
* no entry for the old UID */
/* Check if the new UID already has an entry */
if ( (lseek (fd, off_newuid, SEEK_SET) == off_newuid)
&& (read (fd, &ll, sizeof ll) == (ssize_t) sizeof ll)) {
/* Reset the new uid's lastlog entry */
memzero (&ll, sizeof (ll));
if ( (lseek (fd, off_newuid, SEEK_SET) != off_newuid)
|| (write (fd, &ll, sizeof ll) != (ssize_t) sizeof ll)
|| (fsync (fd) != 0)
|| (close (fd) != 0)) {
fprintf (stderr,
_("%s: failed to copy the lastlog entry of user %lu to user %lu: %s\n"),
Prog, (unsigned long) user_id, (unsigned long) user_newid, strerror (errno));
}
} else {
(void) close (fd);
}
}
}
/*
* update_faillog - update the faillog file
*
* Relocate the "faillog" entries for the user. The old entry is
* left alone in case the UID was shared. It doesn't hurt anything
* to just leave it be.
*/
static void update_faillog (void)
{
struct faillog fl;
int fd;
off_t off_uid = (off_t) user_id * sizeof fl;
off_t off_newuid = (off_t) user_newid * sizeof fl;
if (access (FAILLOG_FILE, F_OK) != 0) {
return;
}
fd = open (FAILLOG_FILE, O_RDWR);
if (-1 == fd) {
fprintf (stderr,
_("%s: failed to copy the faillog entry of user %lu to user %lu: %s\n"),
Prog, (unsigned long) user_id, (unsigned long) user_newid, strerror (errno));
return;
}
if ( (lseek (fd, off_uid, SEEK_SET) == off_uid)
&& (read (fd, (char *) &fl, sizeof fl) == (ssize_t) sizeof fl)) {
/* Copy the old entry to its new location */
if ( (lseek (fd, off_newuid, SEEK_SET) != off_newuid)
|| (write (fd, &fl, sizeof fl) != (ssize_t) sizeof fl)
|| (fsync (fd) != 0)
|| (close (fd) != 0)) {
fprintf (stderr,
_("%s: failed to copy the faillog entry of user %lu to user %lu: %s\n"),
Prog, (unsigned long) user_id, (unsigned long) user_newid, strerror (errno));
}
} else {
/* Assume lseek or read failed because there is
* no entry for the old UID */
/* Check if the new UID already has an entry */
if ( (lseek (fd, off_newuid, SEEK_SET) == off_newuid)
&& (read (fd, &fl, sizeof fl) == (ssize_t) sizeof fl)) {
2011-07-14 18:58:59 +05:30
/* Reset the new uid's faillog entry */
memzero (&fl, sizeof (fl));
if ( (lseek (fd, off_newuid, SEEK_SET) != off_newuid)
|| (write (fd, &fl, sizeof fl) != (ssize_t) sizeof fl)
|| (close (fd) != 0)) {
fprintf (stderr,
_("%s: failed to copy the faillog entry of user %lu to user %lu: %s\n"),
Prog, (unsigned long) user_id, (unsigned long) user_newid, strerror (errno));
}
} else {
(void) close (fd);
}
}
}
#ifndef NO_MOVE_MAILBOX
/*
* This is the new and improved code to carefully chown/rename the user's
* mailbox. Maybe I am too paranoid but the mail spool dir sometimes
* happens to be mode 1777 (this makes mail user agents work without
* being setgid mail, but is NOT recommended; they all should be fixed
* to use movemail). --marekm
*/
static void move_mailbox (void)
{
const char *maildir;
2016-05-15 19:19:39 +05:30
char* mailfile;
char* newmailfile;
int fd;
struct stat st;
2016-05-15 19:19:39 +05:30
size_t len;
maildir = getdef_str ("MAIL_DIR");
#ifdef MAIL_SPOOL_DIR
if ((NULL == maildir) && (getdef_str ("MAIL_FILE") == NULL)) {
maildir = MAIL_SPOOL_DIR;
}
#endif
if (NULL == maildir) {
return;
}
2016-05-15 19:19:39 +05:30
len = strlen (prefix) + strlen (maildir) + strlen (user_name) + 2;
mailfile = alloca (len);
/*
* O_NONBLOCK is to make sure open won't hang on mandatory locks.
* We do fstat/fchown to make sure there are no races (someone
* replacing /var/spool/mail/luser with a hard link to /etc/passwd
* between stat and chown). --marekm
*/
2016-05-15 19:19:39 +05:30
if (prefix[0]) {
(void) snprintf (mailfile, len, "%s/%s/%s",
prefix, maildir, user_name);
}
else {
(void) snprintf (mailfile, len, "%s/%s",
maildir, user_name);
}
mailfile[len-1] = '\0';
fd = open (mailfile, O_RDONLY | O_NONBLOCK, 0);
if (fd < 0) {
/* no need for warnings if the mailbox doesn't exist */
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
if (errno != ENOENT) {
perror (mailfile);
* lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: Added *_dbname() functions to retrieve the name of the databases. * lib/groupio.c, lib/groupio.h, lib/pwio.c, lib/pwio.h, lib/sgroupio.c, lib/sgroupio.h, lib/shadowio.c, lib/shadowio.h: *_name() functions renamed *setname(). * src/grpck.c, src/pwck.c: Likewise. * lib/groupio.h, lib/pwio.h, lib/sgroupio.h, lib/shadowio.h: Added the name of the arguments to the prototypes. * src/chage, src/chfn.c, src/chgpasswd.c, src/chpasswd.c, src/chsh.c, src/gpasswd.c, src/groupadd.c, src/groupdel.c, src/groupmod.c, src/grpck.c, src/grpconv.c, src/grpunconv.c, src/newusers.c, src/passwd.c, src/pwck.c, src/pwconv.c, src/pwunconv.c, src/useradd.c, src/userdel.c, src/usermod.c: Harmonize the erro & syslog messages in case of failure of the *_lock(), *_open(), *_close(), *_unlock(), *_remove() functions. * src/chgpasswd.c, src/chpasswd.c, src/usermod.c: Avoid capitalized messages. * src/chpasswd.c, src/useradd.c, src/usermod.c: Harmonize messages in case of inexistent entries. * src/usermod.c: Harmonize messages in case of already existing entries. * src/newusers.c, src/useradd.c: Simplify PAM error handling. * src/useradd.c: Report failures to unlock files (stderr, syslog, and audit). But do not fail (continue). * src/useradd.c (open_files): Do not report to syslog & audit failures to lock or open the databases. This might be harmless, and the logs were not already informed that a change was requested. * src/usermod.c: It's not the account which is unlocked, but its password.
2008-08-06 21:27:31 +05:30
}
return;
}
if (fstat (fd, &st) < 0) {
perror ("fstat");
(void) close (fd);
return;
}
if (st.st_uid != user_id) {
/* better leave it alone */
fprintf (stderr, _("%s: warning: %s not owned by %s\n"),
Prog, mailfile, user_name);
(void) close (fd);
return;
}
if (uflg) {
if (fchown (fd, user_newid, (gid_t) -1) < 0) {
perror (_("failed to change mailbox owner"));
}
#ifdef WITH_AUDIT
else {
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing mail file owner",
user_newname, (unsigned int) user_newid, 1);
}
#endif
}
(void) close (fd);
if (lflg) {
2016-05-15 19:19:39 +05:30
len = strlen (prefix) + strlen (maildir) + strlen (user_newname) + 2;
newmailfile = alloca(len);
if (prefix[0]) {
(void) snprintf (newmailfile, len, "%s/%s/%s",
prefix, maildir, user_newname);
}
else {
(void) snprintf (newmailfile, len, "%s/%s",
maildir, user_newname);
}
newmailfile[len - 1] = '\0';
if ( (link (mailfile, newmailfile) != 0)
|| (unlink (mailfile) != 0)) {
perror (_("failed to rename mailbox"));
}
#ifdef WITH_AUDIT
else {
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing mail file name",
user_newname, (unsigned int) user_newid, 1);
}
#endif
}
}
#endif
/*
* main - usermod command
*/
int main (int argc, char **argv)
{
#ifdef ACCT_TOOLS_SETUID
#ifdef USE_PAM
pam_handle_t *pamh = NULL;
int retval;
#endif /* USE_PAM */
#endif /* ACCT_TOOLS_SETUID */
/*
* Get my name so that I can use it to report errors.
*/
Prog = Basename (argv[0]);
(void) setlocale (LC_ALL, "");
(void) bindtextdomain (PACKAGE, LOCALEDIR);
(void) textdomain (PACKAGE);
process_root_flag ("-R", argc, argv);
2016-05-15 19:19:39 +05:30
prefix = process_prefix_flag ("-P", argc, argv);
OPENLOG ("usermod");
#ifdef WITH_AUDIT
audit_help_open ();
#endif
sys_ngroups = sysconf (_SC_NGROUPS_MAX);
user_groups = (char **) malloc (sizeof (char *) * (1 + sys_ngroups));
user_groups[0] = (char *) 0;
is_shadow_pwd = spw_file_present ();
#ifdef SHADOWGRP
is_shadow_grp = sgr_file_present ();
#endif
#ifdef ENABLE_SUBIDS
is_sub_uid = sub_uid_file_present ();
is_sub_gid = sub_gid_file_present ();
#endif /* ENABLE_SUBIDS */
process_flags (argc, argv);
/*
* The home directory, the username and the user's UID should not
* be changed while the user is logged in.
2016-05-15 19:19:39 +05:30
* Note: no need to check if a prefix is specified...
*/
2016-05-15 19:19:39 +05:30
if ( (prefix[0] == '\0') && (uflg || lflg || dflg
#ifdef ENABLE_SUBIDS
|| Vflg || Wflg
#endif /* ENABLE_SUBIDS */
)
&& (user_busy (user_name, user_id) != 0)) {
exit (E_USER_BUSY);
}
#ifdef ACCT_TOOLS_SETUID
#ifdef USE_PAM
* lib/prototypes.h, configure.in, libmisc/Makefile.am, libmisc/xgetXXbyYY.c, libmisc/xgetpwnam.c, libmisc/xgetpwuid.c, libmisc/xgetgrnam.c, libmisc/xgetgrgid.c, libmisc/xgetspnam.c: Added functions xgetpwnam(), xgetpwuid(), xgetgrnam(), xgetgrgid(), and xgetspnam(). They allocate memory for the returned structure and are more robust to successive calls. They are implemented with the libc's getxxyyy_r() functions if available. * libmisc/limits.c, libmisc/entry.c, libmisc/chowntty.c, libmisc/addgrps.c, libmisc/myname.c, libmisc/rlogin.c, libmisc/pwdcheck.c, src/newgrp.c, src/login_nopam.c, src/userdel.c, src/lastlog.c, src/grpck.c, src/gpasswd.c, src/newusers.c, src/chpasswd.c, src/chfn.c, src/groupmems.c, src/usermod.c, src/expiry.c, src/groupdel.c, src/chgpasswd.c, src/su.c, src/useradd.c, src/groupmod.c, src/passwd.c, src/pwck.c, src/groupadd.c, src/chage.c, src/login.c, src/suauth.c, src/faillog.c, src/groups.c, src/chsh.c, src/id.c: Review all the usage of one of the getpwnam(), getpwuid(), getgrnam(), getgrgid(), and getspnam() functions. It was noticed on http://bugs.debian.org/341230 that chfn and chsh use a passwd structure after calling a pam function, which result in using information from the passwd structure requested by pam, not the original one. It is much easier to use the new xget... functions to avoid these issues. I've checked which call to the original get... functions could be left (reducing the scope of the structure if possible), and I've left comments to ease future reviews (e.g. /* local, no need for xgetpwnam */). Note: the getpwent/getgrent calls should probably be checked also. * src/groupdel.c, src/expiry.c: Fix typos in comments. * src/groupmod.c: Re-indent. * libmisc/Makefile.am, lib/groupmem.c, lib/groupio.c, lib/pwmem.c, lib/pwio.c, lib/shadowmem.c, lib/shadowio.c: Move the __<xx>_dup functions (used by the xget... functions) from the <xx>io.c files to the new <xx>mem.c files. This avoid linking some utils against the SELinux library.
2007-11-19 04:45:26 +05:30
{
struct passwd *pampw;
pampw = getpwuid (getuid ()); /* local, no need for xgetpwuid */
if (pampw == NULL) {
fprintf (stderr,
_("%s: Cannot determine your user name.\n"),
Prog);
exit (1);
* lib/prototypes.h, configure.in, libmisc/Makefile.am, libmisc/xgetXXbyYY.c, libmisc/xgetpwnam.c, libmisc/xgetpwuid.c, libmisc/xgetgrnam.c, libmisc/xgetgrgid.c, libmisc/xgetspnam.c: Added functions xgetpwnam(), xgetpwuid(), xgetgrnam(), xgetgrgid(), and xgetspnam(). They allocate memory for the returned structure and are more robust to successive calls. They are implemented with the libc's getxxyyy_r() functions if available. * libmisc/limits.c, libmisc/entry.c, libmisc/chowntty.c, libmisc/addgrps.c, libmisc/myname.c, libmisc/rlogin.c, libmisc/pwdcheck.c, src/newgrp.c, src/login_nopam.c, src/userdel.c, src/lastlog.c, src/grpck.c, src/gpasswd.c, src/newusers.c, src/chpasswd.c, src/chfn.c, src/groupmems.c, src/usermod.c, src/expiry.c, src/groupdel.c, src/chgpasswd.c, src/su.c, src/useradd.c, src/groupmod.c, src/passwd.c, src/pwck.c, src/groupadd.c, src/chage.c, src/login.c, src/suauth.c, src/faillog.c, src/groups.c, src/chsh.c, src/id.c: Review all the usage of one of the getpwnam(), getpwuid(), getgrnam(), getgrgid(), and getspnam() functions. It was noticed on http://bugs.debian.org/341230 that chfn and chsh use a passwd structure after calling a pam function, which result in using information from the passwd structure requested by pam, not the original one. It is much easier to use the new xget... functions to avoid these issues. I've checked which call to the original get... functions could be left (reducing the scope of the structure if possible), and I've left comments to ease future reviews (e.g. /* local, no need for xgetpwnam */). Note: the getpwent/getgrent calls should probably be checked also. * src/groupdel.c, src/expiry.c: Fix typos in comments. * src/groupmod.c: Re-indent. * libmisc/Makefile.am, lib/groupmem.c, lib/groupio.c, lib/pwmem.c, lib/pwio.c, lib/shadowmem.c, lib/shadowio.c: Move the __<xx>_dup functions (used by the xget... functions) from the <xx>io.c files to the new <xx>mem.c files. This avoid linking some utils against the SELinux library.
2007-11-19 04:45:26 +05:30
}
retval = pam_start ("usermod", pampw->pw_name, &conv, &pamh);
}
if (PAM_SUCCESS == retval) {
retval = pam_authenticate (pamh, 0);
}
if (PAM_SUCCESS == retval) {
retval = pam_acct_mgmt (pamh, 0);
}
if (PAM_SUCCESS != retval) {
fprintf (stderr, _("%s: PAM: %s\n"),
Prog, pam_strerror (pamh, retval));
SYSLOG((LOG_ERR, "%s", pam_strerror (pamh, retval)));
if (NULL != pamh) {
(void) pam_end (pamh, retval);
}
exit (1);
}
(void) pam_end (pamh, retval);
#endif /* USE_PAM */
#endif /* ACCT_TOOLS_SETUID */
#ifdef WITH_TCB
if (shadowtcb_set_user (user_name) == SHADOWTCB_FAILURE) {
exit (E_PW_UPDATE);
}
#endif
/*
* Do the hard stuff - open the files, change the user entries,
* change the home directory, then close and update the files.
*/
open_files ();
if ( cflg || dflg || eflg || fflg || gflg || Lflg || lflg || pflg
|| sflg || uflg || Uflg) {
usr_update ();
}
if (Gflg || lflg) {
grp_update ();
}
#ifdef ENABLE_SUBIDS
if (Vflg) {
struct ulong_range_list_entry *ptr;
for (ptr = del_sub_uids; ptr != NULL; ptr = ptr->next) {
unsigned long count = ptr->range.last - ptr->range.first + 1;
if (sub_uid_remove(user_name, ptr->range.first, count) == 0) {
fprintf (stderr,
_("%s: failed to remove uid range %lu-%lu from '%s'\n"),
Prog, ptr->range.first, ptr->range.last,
sub_uid_dbname ());
fail_exit (E_SUB_UID_UPDATE);
}
}
}
if (vflg) {
struct ulong_range_list_entry *ptr;
for (ptr = add_sub_uids; ptr != NULL; ptr = ptr->next) {
unsigned long count = ptr->range.last - ptr->range.first + 1;
if (sub_uid_add(user_name, ptr->range.first, count) == 0) {
fprintf (stderr,
_("%s: failed to add uid range %lu-%lu to '%s'\n"),
Prog, ptr->range.first, ptr->range.last,
sub_uid_dbname ());
fail_exit (E_SUB_UID_UPDATE);
}
}
}
if (Wflg) {
struct ulong_range_list_entry *ptr;
for (ptr = del_sub_gids; ptr != NULL; ptr = ptr->next) {
unsigned long count = ptr->range.last - ptr->range.first + 1;
if (sub_gid_remove(user_name, ptr->range.first, count) == 0) {
fprintf (stderr,
_("%s: failed to remove gid range %lu-%lu from '%s'\n"),
Prog, ptr->range.first, ptr->range.last,
sub_gid_dbname ());
fail_exit (E_SUB_GID_UPDATE);
}
}
}
if (wflg) {
struct ulong_range_list_entry *ptr;
for (ptr = add_sub_gids; ptr != NULL; ptr = ptr->next) {
unsigned long count = ptr->range.last - ptr->range.first + 1;
if (sub_gid_add(user_name, ptr->range.first, count) == 0) {
fprintf (stderr,
_("%s: failed to add gid range %lu-%lu to '%s'\n"),
Prog, ptr->range.first, ptr->range.last,
sub_gid_dbname ());
fail_exit (E_SUB_GID_UPDATE);
}
}
}
#endif /* ENABLE_SUBIDS */
close_files ();
#ifdef WITH_TCB
if ( (lflg || uflg)
&& (shadowtcb_move (user_newname, user_newid) == SHADOWTCB_FAILURE) ) {
exit (E_PW_UPDATE);
}
#endif
nscd_flush_cache ("passwd");
nscd_flush_cache ("group");
Flush sssd caches in addition to nscd caches Some distributions, notably Fedora, have the following order of nsswitch modules by default: passwd: sss files group: sss files The advantage of serving local users through SSSD is that the nss_sss module has a fast mmapped-cache that speeds up NSS lookups compared to accessing the disk an opening the files on each NSS request. Traditionally, this has been done with the help of nscd, but using nscd in parallel with sssd is cumbersome, as both SSSD and nscd use their own independent caching, so using nscd in setups where sssd is also serving users from some remote domain (LDAP, AD, ...) can result in a bit of unpredictability. More details about why Fedora chose to use sss before files can be found on e.g.: https://fedoraproject.org//wiki/Changes/SSSDCacheForLocalUsers or: https://docs.pagure.org/SSSD.sssd/design_pages/files_provider.html Now, even though sssd watches the passwd and group files with the help of inotify, there can still be a small window where someone requests a user or a group, finds that it doesn't exist, adds the entry and checks again. Without some support in shadow-utils that would explicitly drop the sssd caches, the inotify watch can fire a little late, so a combination of commands like this: getent passwd user || useradd user; getent passwd user can result in the second getent passwd not finding the newly added user as the racy behaviour might still return the cached negative hit from the first getent passwd. This patch more or less copies the already existing support that shadow-utils had for dropping nscd caches, except using the "sss_cache" tool that sssd ships.
2018-09-12 17:52:11 +05:30
sssd_flush_cache (SSSD_DB_PASSWD | SSSD_DB_GROUP);
#ifdef WITH_SELINUX
if (Zflg) {
if ('\0' != *user_selinux) {
if (set_seuser (user_name, user_selinux) != 0) {
fprintf (stderr,
_("%s: warning: the user name %s to %s SELinux user mapping failed.\n"),
Prog, user_name, user_selinux);
#ifdef WITH_AUDIT
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"modifying User mapping ",
user_name, (unsigned int) user_id,
SHADOW_AUDIT_FAILURE);
#endif /* WITH_AUDIT */
fail_exit (E_SE_UPDATE);
}
} else {
if (del_seuser (user_name) != 0) {
fprintf (stderr,
_("%s: warning: the user name %s to SELinux user mapping removal failed.\n"),
Prog, user_name);
#ifdef WITH_AUDIT
audit_logger (AUDIT_ADD_USER, Prog,
"removing SELinux user mapping",
user_name, (unsigned int) user_id,
SHADOW_AUDIT_FAILURE);
#endif /* WITH_AUDIT */
fail_exit (E_SE_UPDATE);
}
}
}
#endif /* WITH_SELINUX */
if (mflg) {
move_home ();
}
#ifndef NO_MOVE_MAILBOX
if (lflg || uflg) {
move_mailbox ();
}
#endif /* NO_MOVE_MAILBOX */
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
if (uflg) {
update_lastlog ();
update_faillog ();
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
}
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
if (!mflg && (uflg || gflg)) {
struct stat sb;
if (stat (dflg ? prefix_user_newhome : prefix_user_home, &sb) == 0 &&
((uflg && sb.st_uid == user_newid) || sb.st_uid == user_id)) {
2010-08-20 23:54:33 +05:30
/*
* Change the UID on all of the files owned by
* `user_id' to `user_newid' in the user's home
* directory.
*
* move_home() already takes care of changing the
* ownership.
*
*/
#ifdef WITH_AUDIT
if (uflg || gflg) {
audit_logger (AUDIT_USER_CHAUTHTOK, Prog,
"changing home directory owner",
user_newname, (unsigned int) user_newid, 1);
}
#endif
2016-05-15 19:19:39 +05:30
if (chown_tree (dflg ? prefix_user_newhome : prefix_user_home,
2010-08-20 23:54:33 +05:30
user_id,
uflg ? user_newid : (uid_t)-1,
user_gid,
gflg ? user_newgid : (gid_t)-1) != 0) {
fprintf (stderr,
_("%s: Failed to change ownership of the home directory"),
Prog);
fail_exit (E_HOMEDIR);
}
2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/useradd.c: spool is a constant string. * src/useradd.c: Set the new copy_tree's paramater 'copy_root' to false 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * src/usermod.c: move_home() is only called if mflg is set. * src/usermod.c: Fail is -m is provided but the old home directory is not a directory. * src/usermod.c: Use the previous improvement of copy_tree to provide better error diagnosis. * src/usermod.c: When rename() is used, also change the ownership. * src/usermod.c: Do not change the ownership of the root directory twice. * src/usermod.c: When -u is provided, only change the ownership of the home directory if it is a directory. * src/usermod.c: Also change ownerships when -g is used. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * lib/prototypes.h, libmisc/copydir.c: Add the old UID and GID to copy_tree to detect when ownership shall be changed. * libmisc/copydir.c: Document the behavior when the IDs are set to -1. * lib/prototypes.h, libmisc/copydir.c (copy_tree): Add parameter copy_root. * libmisc/copydir.c: error() and ctx can be static. * libmisc/copydir.c (copy_hardlink): Remove parameter src. 2010-04-04 Nicolas François <nicolas.francois@centraliens.net> * libmisc/chowndir.c: Dynamically allocate memory to support path longer than 1024 characters. * libmisc/chowndir.c: Fix typos in documentation. * libmisc/chowndir.c: Support and document the behavior when a old or new ID is set to -1. * libmisc/chowndir.c: Improved error detection when chown fails. * libmisc/chowndir.c: Harmonize error handling strategy when an error occurs: stop changing ownership as soon as an error was detected.
2010-04-05 02:25:46 +05:30
}
}
return E_SUCCESS;
}