2.0.6

svn: r5082

CVSROOT/checkoutlist

@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'

CVSROOT/commitinfo

@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

@@ -1,11 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Set `PreservePermissions' to `yes' to save file status information
-# in the repository.
-#PreservePermissions=no
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no

CVSROOT/cvswrappers

@@ -1,23 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/editinfo

@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/loginfo

@@ -1,26 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

CVSROOT/modules

@@ -1,26 +0,0 @@
-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

CVSROOT/notify

@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"

CVSROOT/rcsinfo

@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

gramps/.cvsignore

@@ -1,5 +0,0 @@
-Makefile
-config.cache
-config.log
-config.status
-gramps.sh

gramps/AUTHORS

@@ -1,5 +0,0 @@
-Donald N. Allingham ** Concept and main design
-
-David Hampton ** Autocomp.py and Report.py
-
-Donald A. Peterson  ** Makefiles, LaTeXDoc.py

gramps/COPYING

@@ -1,339 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	Appendix: How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.

gramps/ChangeLog

@@ -1 +0,0 @@
- 

gramps/HACKING

@@ -1,79 +0,0 @@
-For rebuilding from source, here are some guidelines to follow.  For
-developers who may be adding functionality to the program, be sure to read
-the last section of this documen: "FINAL WORDS".
-
-SUPER-SHORT VERSION:
-You should be able to just run "./configure && make". But if you make any
-significant changes or experience any problems, you may wish to run
-"./autogen.sh && make" to regenerate everything.
-
-This will call aclocal if necessary, then automake, which creates
-Makefile.in from Makefile.am rules. Then it calls autoconf, which will
-generate configure from configure.in and the Makefile.{am,in} sources.
-Finally, autogen calls configure to generate the final files necessary for
-building gramps.
-
-SHORT VERSION:
-Execute:
-aclocal
-automake --add-missing --gnu && autoconf && make
-
-HTML documentation is built from SGML sources via jw.  It is known to work
-with docbook-utils-0.6.9.  There is a problem with 0.6.10, which seems to
-have some messed up dsl files. If you have difficulty building the HTML
-documentation with your version of jw, then remove "doc" from the SUBDIRS
-list in the top-level Makefile and send a report of where the failure was to
-the gramps-devel list.  This distribution is tested with the style sheets
-and PNG support from the gnome-doc-tools-2-1 package.
-
-MORE INFO: Version and package info is now set in configure.in through a
-call to the AM_INIT_AUTOMAKE macro.  The results are stored in variables
-PACKAGE and VERSION, which then get substituted wherever necessary. 
-(gramps.sh, gramps.spec, src/const.py, asst. Makefiles, etc.) We also
-manually set the RELEASE variable for setting things like "pre" or minor
-bugfix issues. * Note: Using @VERSION@ in the manuals has the advantage that
-the current manual always states that it describes current version of
-gramps.  The disadvantage is that this becomes misleading if the manual
-isn't regularly updated.  Keep in mind this is GRAMPS version and not
-*manual* version. Another problem is that the standard GNOME SGML
-documentation make rules (sgmldocs.make) have their own rule, but automake
-generates its own rule and this introduces a conflict.
-
-"make (un)install" now runs scrollkeeper-update to ensure
-documentation database is up to date. Scrollkeeper v. > 0.1.4 should in
-principle work, v. > 0.2 should see no problems.  
-
-VERBOSE, UGLY DETAILS FOR DEVELOPERS:
-Using automake/autoconf adds many, MANY build targets to the makefiles.
-Basically, we only care about the main and "install" targets.  However,
-there are some others that bear further notice:
-
-* make dist -- will create a lovely gramps-{VERSION}.tar.gz archive with
-everything needed to distribute, including the HTML documentation just in
-case Joe User doen't know about or have a compatable jw/db2html.  After
-running "make dist" you can create the  rpms using 
-"rpm -ta gramps-{VERSION}.tar.gz".  How nice is that?
-
-* make clean -- only gets rid of byte-compiled stuff like .so files.
-
-* make distclean -- improves on clean by eliminating configuration (*.in,
-config.*, Makefiles, and converted documentation.) stuff. This is generally
-what you (as a developer) will want for testing "fresh" compiles.
-
-* make trans -- We add this one on our own for building the template.po file.
-
-Another caveat of the automake mantra is that new/overriding make
-targets/rules/defines should generally go in the Makefile.am files rather
-than Makefile.in.  
-
-* Note: Another beauty of the automake mechanism (and having automake macros
-in the configure script) is that once the scripts have been made, a change
-to any .am file will trigger "make" to regenerate the Makefile.in/configure
-scripts as appropriate.  It is _very_ convenient.
-
-FINAL WORDS: automake "thinks" of a distribution in terms of "SOURCES", such
-as raw C code, "COMPILED OBJECTS" like executables and libraries, and
-"DATA", such as images, scripts, and documentation.  Thus, for gramps we
-concentrate on DATA-type objects.  We must tell automake what objects are
-important.  We do this by adding to the EXTRA_DIST variable in the various
-Makefile.am files before running automake. 

gramps/INSTALL

@@ -1,79 +0,0 @@
-For rebuilding from source, here are some guidelines to follow.  For
-developers who may be adding functionality to the program, be sure to read
-the last section of this documen: "FINAL WORDS".
-
-SUPER-SHORT VERSION:
-You should be able to just run "./configure && make". But if you make any
-significant changes or experience any problems, you may wish to run
-"./autogen.sh && make" to regenerate everything.
-
-This will call aclocal if necessary, then automake, which creates
-Makefile.in from Makefile.am rules. Then it calls autoconf, which will
-generate configure from configure.in and the Makefile.{am,in} sources.
-Finally, autogen calls configure to generate the final files necessary for
-building gramps.
-
-SHORT VERSION:
-Execute:
-aclocal
-automake --add-missing --gnu && autoconf && make
-
-HTML documentation is built from SGML sources via jw.  It is known to work
-with docbook-utils-0.6.9.  There is a problem with 0.6.10, which seems to
-have some messed up dsl files. If you have difficulty building the HTML
-documentation with your version of jw, then remove "doc" from the SUBDIRS
-list in the top-level Makefile and send a report of where the failure was to
-the gramps-devel list.  This distribution is tested with the style sheets
-and PNG support from the gnome-doc-tools-2-1 package.
-
-MORE INFO: Version and package info is now set in configure.in through a
-call to the AM_INIT_AUTOMAKE macro.  The results are stored in variables
-PACKAGE and VERSION, which then get substituted wherever necessary. 
-(gramps.sh, gramps.spec, src/const.py, asst. Makefiles, etc.) We also
-manually set the RELEASE variable for setting things like "pre" or minor
-bugfix issues. * Note: Using @VERSION@ in the manuals has the advantage that
-the current manual always states that it describes current version of
-gramps.  The disadvantage is that this becomes misleading if the manual
-isn't regularly updated.  Keep in mind this is GRAMPS version and not
-*manual* version. Another problem is that the standard GNOME SGML
-documentation make rules (sgmldocs.make) have their own rule, but automake
-generates its own rule and this introduces a conflict.
-
-"make (un)install" now runs scrollkeeper-update to ensure
-documentation database is up to date. Scrollkeeper v. > 0.1.4 should in
-principle work, v. > 0.2 should see no problems.  
-
-VERBOSE, UGLY DETAILS FOR DEVELOPERS:
-Using automake/autoconf adds many, MANY build targets to the makefiles.
-Basically, we only care about the main and "install" targets.  However,
-there are some others that bear further notice:
-
-* make dist -- will create a lovely gramps-{VERSION}.tar.gz archive with
-everything needed to distribute, including the HTML documentation just in
-case Joe User doen't know about or have a compatable jw/db2html.  After
-running "make dist" you can create the  rpms using 
-"rpm -ta gramps-{VERSION}.tar.gz".  How nice is that?
-
-* make clean -- only gets rid of byte-compiled stuff like .so files.
-
-* make distclean -- improves on clean by eliminating configuration (*.in,
-config.*, Makefiles, and converted documentation.) stuff. This is generally
-what you (as a developer) will want for testing "fresh" compiles.
-
-* make trans -- We add this one on our own for building the template.po file.
-
-Another caveat of the automake mantra is that new/overriding make
-targets/rules/defines should generally go in the Makefile.am files rather
-than Makefile.in.  
-
-* Note: Another beauty of the automake mechanism (and having automake macros
-in the configure script) is that once the scripts have been made, a change
-to any .am file will trigger "make" to regenerate the Makefile.in/configure
-scripts as appropriate.  It is _very_ convenient.
-
-FINAL WORDS: automake "thinks" of a distribution in terms of "SOURCES", such
-as raw C code, "COMPILED OBJECTS" like executables and libraries, and
-"DATA", such as images, scripts, and documentation.  Thus, for gramps we
-concentrate on DATA-type objects.  We must tell automake what objects are
-important.  We do this by adding to the EXTRA_DIST variable in the various
-Makefile.am files before running automake. 

gramps/Makefile.am

@@ -1,30 +0,0 @@
-# copyright (C) 2000 Sun Microsystems, Inc.
-
-SUBDIRS = src doc omf-install
-
-EXTRA_DIST =  autogen.sh gramps.spec.in 
-
-bin_SCRIPTS = gramps
-
-grampsdocdir = $(datadir)/doc/gramps-$(VERSION)
-scrollkeeper_localstate_dir = $(localstatedir)/lib/scrollkeeper
-
-gramps: gramps.sh
-	cp gramps.sh gramps
-
-dist-hook: gramps.spec
-	cp gramps.spec $(distdir)
-
-# Build/rebuild the catalog
-install-data-hook:
-	rm -rf $(DESTDIR)$(scrollkeeper_localstate_dir)
-	$(mkinstalldirs) $(DESTDIR)$(scrollkeeper_localstate_dir)
-	$(mkinstalldirs) $(DESTDIR)$(localstatedir)/log
-	scrollkeeper-rebuilddb -p $(DESTDIR)$(scrollkeeper_localstate_dir)
-
-# Remove generated files
-uninstall-local:
-	-rm -rf $(DESTDIR)$(gramps_localstate_dir)
-	-rm -f $(DESTDIR)$(localstatedir)/log/gramps.log
-	-rm -f $(DESTDIR)$(localstatedir)/log/gramps.log.1
-

gramps/Makefile.in

@@ -1,494 +0,0 @@
-# Makefile.in generated by automake 1.6.2 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# copyright (C) 2000 Sun Microsystems, Inc.
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-AWK = @AWK@
-BINSH = @BINSH@
-CC = @CC@
-DEPDIR = @DEPDIR@
-DISABLE_SCROLLKEEPER = @DISABLE_SCROLLKEEPER@
-GNOMEHELP = @GNOMEHELP@
-HAVE_GNOME_CONFIG = @HAVE_GNOME_CONFIG@
-HAVE_JW = @HAVE_JW@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-JW = @JW@
-LANGUAGES = @LANGUAGES@
-LIBS = @LIBS@
-MOFILES = @MOFILES@
-MSGFMT = @MSGFMT@
-P15_INCLUDES = @P15_INCLUDES@
-P20_INCLUDES = @P20_INCLUDES@
-P21_INCLUDES = @P21_INCLUDES@
-P22_INCLUDES = @P22_INCLUDES@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-PYTHON = @PYTHON@
-PYTHON15 = @PYTHON15@
-PYTHON20 = @PYTHON20@
-PYTHON21 = @PYTHON21@
-PYTHON22 = @PYTHON22@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
-SCROLLKEEPER_REQUIRED = @SCROLLKEEPER_REQUIRED@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VERSIONSTRING = @VERSIONSTRING@
-ZIP = @ZIP@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-
-SUBDIRS = src doc omf-install
-
-EXTRA_DIST = autogen.sh gramps.spec.in 
-
-bin_SCRIPTS = gramps
-
-grampsdocdir = $(datadir)/doc/gramps-$(VERSION)
-scrollkeeper_localstate_dir = $(localstatedir)/lib/scrollkeeper
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES = gramps.spec gramps.sh
-SCRIPTS = $(bin_SCRIPTS)
-
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-	uninstall-info-recursive all-recursive install-data-recursive \
-	install-exec-recursive installdirs-recursive install-recursive \
-	uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
-	Makefile.in NEWS TODO aclocal.m4 configure configure.in \
-	gramps.sh.in gramps.spec.in install-sh missing mkinstalldirs \
-	py-compile
-DIST_SUBDIRS = $(SUBDIRS)
-all: all-recursive
-
-.SUFFIXES:
-
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  Makefile
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-$(ACLOCAL_M4):  configure.in 
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-gramps.spec: $(top_builddir)/config.status gramps.spec.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-gramps.sh: $(top_builddir)/config.status gramps.sh.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-install-binSCRIPTS: $(bin_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(bindir)
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  if test -f $$d$$p; then \
-	    f="`echo $$f|sed '$(transform)'`"; \
-	    echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
-	    $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
-	  else :; fi; \
-	done
-
-uninstall-binSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  f="`echo $$f|sed '$(transform)'`"; \
-	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
-	  rm -f $(DESTDIR)$(bindir)/$$f; \
-	done
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distcleancheck_listfiles = find . -type f -print
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkinstalldirs) $(distdir)/. $(distdir)/src
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$(top_distdir)" \
-	        distdir=../$(distdir)/$$subdir \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="${top_distdir}" distdir="$(distdir)" \
-	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	$(am__remove_distdir)
-	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
-	  && cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
-	      || { echo "ERROR: files left after uninstall:" ; \
-	           find $$dc_install_base -type f -print ; \
-	           exit 1; } >&2 ) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
-	  && rm -f $(distdir).tar.gz \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@echo "$(distdir).tar.gz is ready for distribution" | \
-	  sed 'h;s/./=/g;p;x;p;x'
-distcleancheck: distclean
-	if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(SCRIPTS)
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs) $(DESTDIR)$(bindir)
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-
-install-exec-am: install-binSCRIPTS
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf autom4te.cache
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-binSCRIPTS uninstall-info-am uninstall-local
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
-	clean-generic clean-recursive dist dist-all dist-gzip distcheck \
-	distclean distclean-generic distclean-recursive distclean-tags \
-	distcleancheck distdir dvi dvi-am dvi-recursive info info-am \
-	info-recursive install install-am install-binSCRIPTS \
-	install-data install-data-am install-data-recursive \
-	install-exec install-exec-am install-exec-recursive \
-	install-info install-info-am install-info-recursive install-man \
-	install-recursive install-strip installcheck installcheck-am \
-	installdirs installdirs-am installdirs-recursive \
-	maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-recursive tags tags-recursive uninstall \
-	uninstall-am uninstall-binSCRIPTS uninstall-info-am \
-	uninstall-info-recursive uninstall-local uninstall-recursive
-
-
-gramps: gramps.sh
-	cp gramps.sh gramps
-
-dist-hook: gramps.spec
-	cp gramps.spec $(distdir)
-
-# Build/rebuild the catalog
-install-data-hook:
-	rm -rf $(DESTDIR)$(scrollkeeper_localstate_dir)
-	$(mkinstalldirs) $(DESTDIR)$(scrollkeeper_localstate_dir)
-	$(mkinstalldirs) $(DESTDIR)$(localstatedir)/log
-	scrollkeeper-rebuilddb -p $(DESTDIR)$(scrollkeeper_localstate_dir)
-
-# Remove generated files
-uninstall-local:
-	-rm -rf $(DESTDIR)$(gramps_localstate_dir)
-	-rm -f $(DESTDIR)$(localstatedir)/log/gramps.log
-	-rm -f $(DESTDIR)$(localstatedir)/log/gramps.log.1
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

gramps/NEWS

@@ -1,378 +0,0 @@
-Version 0.8.0
-* Addiition of ZODB support. Support is still preliminary, and not
-  as feature full as the XML support. Requires python 2.1 or higher,
-  so not a good solution for RedHat users, unless the which to compile
-  the python and python-gnome libraries. (RH7.3 ships with python2.2,
-  but that version is tied to an early beta of the GNOME 2 libraries)
-* New build structure from David Hampton.
-* Significant improvement in speed with the GEDCOM export.
-* Enhanced web page generation.
-* Fixed Mandrake 8.2/imlib problem the could cause GRAMPS to fail to
-  run under Mandrake 8.2.
-* Better importing of GEDCOM ids.
-* Better handling of sources/source entry
-* Better handling of exception conditions.
-* Bug fixes.
-
-Version 0.7.3
-* New Russian (Alex Roitman) and Danish (Lars Lundin) translations.
-  GRAMPS now supports English, Italian, German, French, Spanish,
-  Brazilian-Portuguese, Swedish, Danish, and Russian.
-* Custom filter editor allows you to create your personal complex
-  filters that can be applied to reports to select the people that
-  you want. Tools->Utilites->Custom Filter Editor to access the
-  filter builder. (Thanks to Jeff Ollie for some major contributions 
-  here).
-* New report - Complete Individual Report. Allows you to produce a
-  more complete form of the Individual Summary. You can use filters
-  to select all ancestors, all decendants, or any custom filter you
-  want to create more of a 'book' form of a report.
-* On-the-fly document generation instead of pre-built HTML files
-  (Thanks to Don Peterson)
-* Web page generation now generates a two column list, along with
-  labels.
-* GEDCOM impovements, including the ability to use GRAMPS as a GEDCOM
-  viewer (accepts a GEDCOM file as an argument).
-
-
-Version 0.7.2
-* New Brazilian-Portuguese translation (Marcos Bedinelli)
-* Python Imaging Library no longer required for several report
-  formats.
-* Better sizing of images in reports (Bruce DeGrasse)
-* An image subdirectory name can now be specified in the WebPage
-  generation. This allows you to specify the subdirectory (or
-  absence of a subdirectory) where images are placed when generating
-  a web site.
-* Merging allows you to choose the GRAMPS ID of the merged person.
-* Better handling of auto completion of names, places, and other
-  items.
-* Ability to rerun Startup dialog when necessary
-* More information in the Startup dialog
-* Fewer intermediate files when handling images for reports
-* Reports are now plugins, stored in the DocGen library
-* Filter out control characters on GEDCOM import
-* New document format generators for SVG and PostScript.
-* Improved document format generators for LaTeX (Donald Peterson),
-  KWord (Bruce DeGrasse), and AbiWord.
-* Names now have a type (e.g. "Married Name", "Birth Name") 
-  associated with them.
-* Eliminated the intermediate dialog box on importing - GRAMPS
-  now always appends to the current database.
-* If an imported GEDCOM contains REFN tags, they are correlated
-  to the GRAMPS ID if possible.
-
-
-Version 0.7.1
-* A database must now be open at all times. Prevents the problem of
-  not having a place to put files.
-* Several drop down menus for names have been replaced with
-  autocompletion text boxes.
-* Autosave - allows the database to be saved to a backup file
-  periodically.
-* New Descendant Graph dialog.
-* Reorganization of reports.
-* New preferences dialog.
-* Configurable guessing of last names for new children.
-* Slightly improved incomplete date handling.
-* More sort columns and improved sorting in the lists.
-* New tooltips (Don Peterson)
-* Improved navigation in the Pedigree View (Shane Hathaway)
-* Italian translation (Marco Molteni)
-
-Version 0.7.0
-* LD_PRELOAD set to handle Mandrake 8.1 shared library problems.
-* Drag and drop copying of events, address, attributes, and URLs.
-* Improved GEDCOM. GRAMPS now understands many more of the "quirks"
-  of the GEDCOM produced by other programs. In addition, GRAMPS can
-  now tailor its GEDCOM output several other programs. An XML data
-  file is used to describe to GRAMPS the types of quirks each 
-  format uses.
-* Support for French Republican, Hebrew, and Julian calendars.
-* LDS ordinance support.
-* Cleaned up report dialog code.
-* Bug fixes in GEDCOM reading and relationship calculator.
-* Toolbar may display Icons and Text, Text only, or Icons only. This
-  helps in some of the translations, where the long text forced the
-  toolbar to be unusually large.
-* Dragging and dropping media objects can optionally display property
-  dialogs.
-* All toolbar icons have tooltips.
-* Keyboard shortcuts for bookmark saving.
-* Find dialog supports autocompletion, and has the more standard shortcut
-  of C-F.
-* Change in XML database format to provides better support for dates.
-* Added entries to the Help menu to jump to the GRAMPS home page and the
-  GRAMPS mailing list page.
-
-Version 0.6.2
-* Fixed SuSE 7.3/lib-imlib problem.
-* Improved GEDCOM import/export. Gramps now passes the GEDCHK program
-  and can now properly handle the quirks in names, notes, and parent/child
-  relationships from PAF, Legacy, FTW, Brother's Keeper, and Family Origins.
-* After an Add Spouse, make the new spouse display in the Family View
-  interface.
-
-Version 0.6.1
-* Fixed Family View/Pedigree View button swap
-* Updated Spanish translation
-
-Version 0.6.0
-* Support for QUAY, NCHI, and CAUS on GEDCOM import. GEDCOM
-  import is significantly faster.
-* Support for multiple sources per item.
-* Support for revision control. RCS based revision control is 
-  available.
-* Confidence level moved to SourceReference instead of object.
-* All fields of birth and death events are editable. Clicking the
-  Edit button brings up the event editor. Birth and death fields
-  on the Edit Person dialog are now read only.
-* Support for unknown gender.
-* Central image/media repository added. All images in a gallery 
-  are references to these media objects. Media objects can have
-  global properties (in the repository) or local properties (in
-  each gallery).
-* Media types are beyond images are now supported (PDF, MP3,
-  word processor documents, etc.)
-* Drag and drop of images from one gallery to another. Drag and
-  drop from file managers into the gallery. Drag and drop from a
-  web page to a gallery.
-* Drag and drop reordering of children in children lists.
-* Drag and drop reordering of images in a gallery.
-* Autocompletion support on most entry boxes with drop down menus.
-* Plugins can be reloaded without re-starting gramps.
-* Two people can be selected and directly merged from the main
-  person list.
-* Two places can be selected and directly merged from the main 
-  place list.
-* The "Find and Merge" functionality has been improved to make it
-  easier to find matches. 
-* Web page generation is significantly faster.
-* Many plugins enhanced. Descendant browser can jump to an Edit Person
-  display, Event Comparison can now save and load complex filters, 
-  etc.
-* User had significant more control over the format of the internal
-  GRAMPS' ids. You can now set a prefix for each type (such as "I-"
-  for individuals) or specify more powerful formatting using C-like
-  format statements (such as "I-%04d").
-* Adoption relationships are visible on the pedigree view (seen as
-  a dotted line).
-* Reordering GRAMPS' ids attempts to preserve the integer originally
-  assigned to the object.
-* The person view can be sorted by GRAMPS id.
-* KWord format generated is now compatible with KWord 1.1. Images may
-  now be included in KWord documents (requires Python Imaging Library).
-  Tables are not working yet. I can figure out how to format a KWord
-  table.
-
-Version 0.5.1
-* Bug fixes
-* Allow gramps' ids to be edited
-* Added Jesper Zedlitz's PAF for Palm export
-* Progress report on GEDCOM import
-* Add a new person from the parent selection dialog
-* Improved configure script for FreeBSD
-* Documenation improvements
-* Slight performance improvements reading large databases
-
-Version 0.5.0
-* New pedegree form which can display 3, 4, or 5 generations
-  depending on the screen size. Supports better navigation.
-* Added a Find function to quickly find people.
-* Implemented Place objects, allowing additional information
-  to be stored about a place.
-* New icons for Person View and Family View.
-* Online documentation.
-* Pressing enter on qualifier field for a filter will apply
-  the filter.
-* New verification tool added to look for odd things in the
-  database.
-* Improvements in GEDCOM import, including handling some
-  Family Tree Maker pecularities.
-* Spanish translation is now available. This brings the languages
-  to English, Spanish, Swedish, German, and French.
-
-Version 0.4.1
-* Tool/Report menus added to top level menu bar
-* Extract Titles and Nicknames plugin improved to provide more
-  information
-* Several bug fixes, including the problem of swapping father/
-  mother relationships in families
-* Significant improvements in speed for updating displays after
-  adding, editing, or deleting people, and for applying filters.
-* Added Bruce DeGrasse's Detailed Ancestral Report. This will
-  eventually replace the current Ancestral Report.
-
-Version 0.4.0
-* Redesigned Family page. More complex family relationships can be
-  handled.
-* ISO date format supported
-* Places are stored in a pulldown menu
-* gramps ID can be displayed in many lists
-* Multiple selection in Add Children box
-* Internal gramps ID now a string instead of an integer
-* Double clicking on a name in the Pedegree view brings up the edit
-  box for that person
-* Support for same sex parent families has been added
-* Complete rework of Edit Person dialog
-* Added privacy flag and confidence level to events, attributes, etc.
-* Automatically detect gzip'ed XML vs. XML
-* Added option to write either gzip'ed XML or straight XML
-* Warn on closing the edit person and marriage/relationshp window 
-  when modifications have been made.
-* French translation
-* New plugin from Jesper Zedlitz that implements a graphical   
-  representation of the people in the database, allowing you to
-  reposition people according to your own desires.
-* XML is indented properly
-* XML DTD available
-
-Version 0.3.2
-* Fixed Style Editor on WebPage.py, to allow styles to be edited.
-* WebPage generator now lists more information, including sources.
-* May have ironed out the PyXML/Python/SAX issues once and for all,
-  cleaning up the python 1.5/2.X problems.
-* Added the ability to set default directories for reports and
-  databases.
-* Fixed major bug that added a marriage and divorce to every record
-  that was viewed in the family viewer.
-* Fixed bug that was dropping images
-* Many, many other bug fixes.
-* Improved many of the translations.
-
-Version 0.3.1
-* Improved Web Site generation (changed from Individual Web Pages)
-* Faster load times for XML database
-* Fixed unicode problems with Python 2.0
-* Improved GEDCOM exporter
-* Use the GRAMPSDIR environment variable in the shell script to determine
-  the root path instead of dynamically doing it by attempting to look
-  at __file__ in const.py
-* Added better GEDCOM importing for files  generated by Brother's 
-  Keeper and Reunion.
-
-Version 0.3.0
-* Support for RTF (export to MSWord) and limited support for KWord
-  and LaTeX added.
-* User defined styles for reports. Allows the selection of fonts,
-  sizes, colors, alignment, and many other features in output 
-  reports. Styles can be saved for future use.
-* Improved report formats
-* Initial German translation. Please note that the German translation 
-  is new, and it will take a while before it is fully in sync with the
-  program. It will probably take a release or two before it is as 
-  stable as the Swedish translation (it can take a while to provide the
-  translations, and the code is changing, so it takes a while to flush
-  things out).
-* Output format preference and page size preference can be set in the
-  preferences menu.
-* Names can now have sources and notes.
-* Lots of bug fixes
-* Fixes to GEDCOM importer
-
-Version 0.2.0
-* New GEDCOM importer. This new importer understands the GEDCOM
-  file structure, and intelligently parses the file.  More 
-  information is extracted from the GEDCOM file. Guessing the 
-  context of information is no longer done, so the data should go 
-  into the right place.  The display dialog now displays useful and 
-  interesting information as the file is loaded.  The importer
-  has been checked with file generated Personal Ancestral File,
-  Brother's Keeper, DISGEN, the GEDCOM Torture test, and even the
-  sometimes strange output of Family Tree Maker.
-* Better support for sources.  Source button on the main page, and
-  sources are entered from the main screen, instead of being about 
-  five layers deep.
-* Events, sources, attributes, and addresses can now have both 
-  sources and notes.
-* Limited configurability in status bar display. Instead of just a
-  name, you can have a name, the internal ID and a name, or a user
-  selectable attribute and a name.
-* A user selectable attribute can be displayed on the Edit Person
-  display along with the gramps internal ID.  The attribute is
-  specified in the preferences settings, and the value is taken
-  from the person's attribute list.
-* Images now load faster. Thumbnail images are created and maintained
-  by gramps, eliminating the need to rescale images everytime a 
-  gallery is displayed.
-* Paper size preference can now be specified in the preferences 
-  dialog. Once this is set, gramps will make this the default for
-  report generators. Eventually, you will be able to do the same
-  for output format preference. This button is current disabled.
-* Generating slightly better XML. Maintaining compatibility with
-  the older files.
-
-
-Version 0.1.5
-
-* Plenty of bug fixes in the report generators and merging due to the
-  previous addition of date ranges.
-* Added PDF file type generation for reports. Depends on the reportlab
-  package (available at www.reportlab.com).  If the package is not
-  installed, gramps will run, but without PDF generation ability.
-* Will use the Python Imaging Library if present to handle images.  If
-  not, it will revert to the old method of using Imagick (convert).
-* The user can select an attribute (from the attribute list) to display
-  on the Edit Person window.
-* The internal gramps ID is now displayed on the Edit Person window.
-* Marriage types can now be recorded.
-* Addresses now use a single date instead of multiple dates, since 
-  dates can now deal with ranges.
-* Due to a bug in Python 2.0/GTK interaction, list colors are disabled
-  for Python 2.0 and above.
-* configure script now properly deals with Python include paths,
-  eliminating the need to hand edit the src/Makefile to get gramps to
-  run under Python 2.X.
-* Photos are now displayed properly again in the Edit Person gallery.
-* Family notes are now implemented.
-
-Version 0.1.4
-
-* Implemented date ranges.  Valid forms are "from <date> to <date>" and
-  "between <date> and <date>".
-* Better support for partial dates.  A question mark can optionally be 
-  used for a placeholder for a year if the year is unknown.  Illegal 
-  date formats issue a warning upon an attempt to save the date.
-* Start of internationalization (i18n) support.  Had to include a single
-  C file to allow libglade to understand translations.  This means that
-  binary releases are no longer going to be platform independant.
-* Start of a generic output formatter for report generation. Currently
-  supports HTML, OpenOffice (625+), and AbiWord (0.7.13+).  Allows 
-  control of paragraph and font styles.
-* Added into CVS on sourceforge
-* Fixed quite a few bugs
-
-Version 0.1.3
-
-* Allow the user to specifiy their preferred numerical date input format,
-  either DD/MM/YY or MM/DD/YY on the preferences dialog box.
-* Handles file problems a bit more gracefully.
-* Use ISO-8859-1 character set instead of ASCII to support languages other
-  than English.  Eventually this should go to unicode, but python 1.5.2
-  does not have good unicode support.  Python 2.X/Gnome 2.X will be the 
-  migration for this feature.
-* Handle ANSEL encoding for import and exporting GEDCOM files.
-* Fixed a bug in the selection of parents, which did not accept new parents
-  if previous parents did not exist.
-
-Version 0.1.2
-
-* Allow the user the option to display alternate names in the person
-  list. Alternate names in the list have an '*' appended to the end
-  of the name.
-* Merge function now gives the user the option of saving the name of
-  the merged individual as an alternate name if the names are not 
-  the same.
-* Added the "Alternate Birth" and "Alternate Death" to the event list, 
-  to allow other birthdates to be recorded. Gramps makes a distinction
-  between the birthdate/deathdate and the alternates.
-* GEDCOM import and export adapted to load/save alternate birth and
-  death dates.  The first "BIRT" and "DEAT" tags are the ones used
-  for the primary dates, the others are loaded as alternates.
-* Added the ability to store web page addresses for each person. From
-  the edit person page, the "Go" button brings up a web browser to
-  display the page.
-* Fixed a bug in the relationship calculator that caused a traceback
-  when the person selected was a direct ancestor of the active person.
-* Added the suffix field to the alternate name entry on the Edit Person
-  form.

gramps/README

@@ -1,65 +0,0 @@
-Please read the COPYING file first.
-If building from source, also read the HACKING file (at least through the
-"SUPER-SHORT VERSION") before going further.
-
-Requirements
---------------------------------
-Python 1.5.2 or greater
-Gnome 1.2 or greater
-PyGnome 1.0.53 or greater
-
-If you are using python 1.5.2, you may also need PyXML 0.6.2 or
-greater. Many distributions already provide this, but if your
-installation does not have it, you can get it from
-http://sourceforge.net/project/showfiles.php?group_id=6473
-
-Documentation
----------------------------------
-Gramps documentation is supplied in the form of SGML files, which will be
-installed in the GNOME help path(*).  Recent versions of Nautilus and Galeon
-can generate HTML on-the-fly documents from these.  For more information on
-building HTML files (including info about packages that do and do not work
-with the documentation) see the INSTALL file.  To generate HTML
-documentation the following packages *MUST* installed:
-* db2html >= 0.6.9  (jw >= 1.1)  to convert the SGML -> HTML
-* gnome-doc-tools-2-1            for the GNOME documentation style sheets
-The former is part of the docbook-utils package, the latter can be found
-from the developer section at gnome.org. (note that docbook-utils 0.6.10 is
-buggy)
-
-One also needs png support for sgml, which should be a part of the
-gnome-doc-tools package. The /etc/sgml/catalog file should
-contain an entry pointing to PNG support. If configured properly, your
-db2html should automatically look up and use the /etc/sgml/catalog file.
-
-Of course, current HTML documentation can also be found on the gramps website,
-http://gramps.sourceforge.net/help.html
-
-(*) More precisely, they are installed in ${prefix}/share/gnome/help, where
-${prefix} is given by the --prefix= option to configure.  If this is
-different from where your standard GNOME installation looks for help files
-and documentation, then set your GNOMEDIR environment variable to the
-${prefix} path before starting gramps. For example, if you are installing
-gramps in /usr/local/, then type the following:
-in tcsh: setenv GNOMEDIR /usr/local/
-in bash: GNOMEDIR=/usr/local/ ; export GNOMEDIR
-
-
-Building on non-Linux systems: i18n support and GNU make
---------------------------------------------------------
-
-Linux has libintl (GNU gettext) built-in the C library. Other systems
-are likely to have libintl as a separate or optional library. Also,
-other systems may have a different make utility.
-
-On those systems, like FreeBSD, you must tell configure where to find
-the libintl library and the libintl.h include file:
-
-CPPFLAGS="-I/usr/local/include -L/usr/local/lib" ./configure --prefix=/usr/local
-
-Once you have done this, if make fails, use gmake (the name FreeBSD
-gives to GNU make) instead.
-
---------------------------------
-Donald Allingham
-dallingham@users.sourceforge.net

gramps/TODO

@@ -1,39 +0,0 @@
-GRAMPS programming task list. These are tasks that would be nice if
-someone would take over.
-
-Note that most of the development effort is targeted at GNOME 2.
-
-* Drag and drop should display the icon we are dragging instead of just
-  the default icon.  Nautilus does this very effectively, and GTK has
-  support for this.
-* Provide an "import" of a gramps package. Not too difficult to do this,
-  since there is already a ReadTarFile class which will unpackage the
-  file. Needs have an interface built around it.
-* Finish the generic load of revision control interfaces to allow a
-  revision control plugin system. Most of the work is already done.
-* Extend the gramps package exporting to export to a ISO-9660 CD-ROM
-  image. Thumbnails would need to be exported for this as well, since
-  the CD-ROM would be read-only after burning.
-* Disable the save buttons if gramps database is marked read-only. Disable 
-  the adding of media objects as well, since this will cause gramps to
-  try to create a thumbnail in a readonly database.
-* OpenOffice zip file is not handled very gracefully.  Uses the "system"
-  call to generate the zip file using the hard coded path of /usr/bin/zip. 
-  Python 2.0 provides a zip interface, so this may need to hold off until 
-  the move is made to Python 2.0.
-* Startup tips.
-* Captialize/Decapitalize names
-* FIND by ID
-* Better copy/paste handling
-* Re-instate alternate names in the name list. This was dropped due to the
-  need to provide indexing tables to support ZODB.
-* Provide an interface to GtkSpell, so that an integrated spelling checking
-  would be provided.
-* Look at providing a backend interface to gnome-db, allowing real database
-  backends to be pluged into GRAMPS. Maybe replace the ZODB interface.
-* Integrate gnome-print into GRAMPS. Currently an interface does not exist
-  to gnome-print in the gnome-python interface. This would allow print preview
-  and direct document printing.
-* More report formats
-* Look at integrating the layout engine from GraphViz, so that more complicated
-  layout schemes could be used.

gramps/aclocal.m4

@@ -1,939 +0,0 @@
-# aclocal.m4 generated automatically by aclocal 1.6.2 -*- Autoconf -*-
-
-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Do all the work for Automake.                            -*- Autoconf -*-
-
-# This macro actually does too much some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 8
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-AC_PREREQ([2.52])
-
-# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
-# the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl
- AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_][CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_][CC],
-                          defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_][CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_][CXX],
-                          defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-# Copyright 2002  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.6.2])])
-
-# Helper functions for option handling.                    -*- Autoconf -*-
-
-# Copyright 2001, 2002  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-#  -*- Autoconf -*-
-
-
-# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# AM_AUX_DIR_EXPAND
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-# Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_AUX_DIR_EXPAND], [
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# AM_PROG_INSTALL_STRIP
-
-# Copyright 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# serial 4						-*- Autoconf -*-
-
-# Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      am_cv_$1_dependencies_compiler_type=$depmode
-      break
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
-  DEPDIR=.deps
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-AC_SUBST([DEPDIR])
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking Speeds up one-time builds
-  --enable-dependency-tracking  Do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking.   -*- Autoconf -*-
-
-# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
-  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n -e '/^U = / s///p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n -e '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright 2001 Free Software Foundation, Inc.             -*- Autoconf -*-
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-doit:
-	@echo done
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST(am__include)
-AC_SUBST(am__quote)
-AC_MSG_RESULT($_am_result)
-rm -f confinc confmf
-])
-
-# AM_CONDITIONAL                                              -*- Autoconf -*-
-
-# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 5
-
-AC_PREREQ(2.52)
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-        [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([conditional \"$1\" was never defined.
-Usually this means the macro was only invoked conditionally.])
-fi])])
-
-
-# Copyright 1999, 2000, 2001, 2002  Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# AM_PATH_PYTHON([MINIMUM-VERSION])
-
-# Adds support for distributing Python modules and packages.  To
-# install modules, copy them to $(pythondir), using the python_PYTHON
-# automake variable.  To install a package with the same name as the
-# automake package, install to $(pkgpythondir), or use the
-# pkgpython_PYTHON automake variable.
-
-# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
-# locations to install python extension modules (shared libraries).
-# Another macro is required to find the appropriate flags to compile
-# extension modules.
-
-# If your package is configured with a different prefix to python,
-# users will have to add the install directory to the PYTHONPATH
-# environment variable, or create a .pth file (see the python
-# documentation for details).
-
-# If the MINIUMUM-VERSION argument is passed, AM_PATH_PYTHON will
-# cause an error if the version of python installed on the system
-# doesn't meet the requirement.  MINIMUM-VERSION should consist of
-# numbers and dots only.
-
-AC_DEFUN([AM_PATH_PYTHON],
- [
-  dnl Find a Python interpreter.  Python versions prior to 1.5 are not
-  dnl supported because the default installation locations changed from
-  dnl $prefix/lib/site-python in 1.4 to $prefix/lib/python1.5/site-packages
-  dnl in 1.5.
-  m4_define([_AM_PYTHON_INTERPRETER_LIST],
-	    [python python2 python2.2 python2.1 python2.0 python1.6 python1.5])
-
-  m4_if([$1],[],[
-    dnl No version check is needed.
-    # Find any Python interpreter.
-    AC_PATH_PROG([PYTHON], _AM_PYTHON_INTERPRETER_LIST)],[
-    dnl A version check is needed.
-    if test -n "$PYTHON"; then
-      # If the user set $PYTHON, use it and don't search something else.
-      AC_MSG_CHECKING([whether $PYTHON version >= $1])
-      AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
-			      [AC_MSG_RESULT(yes)],
-			      [AC_MSG_ERROR(too old)])
-    else
-      # Otherwise, try each interpreter until we find one that satisfies
-      # VERSION.
-      AC_CACHE_CHECK([for a Python interpreter with version >= $1],
-	[am_cv_pathless_PYTHON],[
-	for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST : ; do
-          if test "$am_cv_pathless_PYTHON" = : ; then
-            AC_MSG_ERROR([no suitable Python interpreter found])
-	  fi
-          AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
-        done])
-      # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
-      AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
-    fi
-  ])
-
-  dnl Query Python for its version number.  Getting [:3] seems to be
-  dnl the best way to do this; it's what "site.py" does in the standard
-  dnl library.
-
-  AC_CACHE_CHECK([for $am_cv_pathless_PYTHON version], [am_cv_python_version],
-    [am_cv_python_version=`$PYTHON -c "import sys; print sys.version[[:3]]"`])
-  AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
-
-  dnl Use the values of $prefix and $exec_prefix for the corresponding
-  dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX.  These are made
-  dnl distinct variables so they can be overridden if need be.  However,
-  dnl general consensus is that you shouldn't need this ability.
-
-  AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
-  AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])
-
-  dnl At times (like when building shared libraries) you may want
-  dnl to know which OS platform Python thinks this is.
-
-  AC_CACHE_CHECK([for $am_cv_pathless_PYTHON platform],
-	         [am_cv_python_platform],
-    [am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"`])
-  AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
-
-
-  dnl Set up 4 directories:
-
-  dnl pythondir -- where to install python scripts.  This is the
-  dnl   site-packages directory, not the python standard library
-  dnl   directory like in previous automake betas.  This behaviour
-  dnl   is more consistent with lispdir.m4 for example.
-  dnl
-  dnl Also, if the package prefix isn't the same as python's prefix,
-  dnl then the old $(pythondir) was pretty useless.
-
-  AC_SUBST([pythondir],
-	   [$PYTHON_PREFIX"/lib/python"$PYTHON_VERSION/site-packages])
-
-  dnl pkgpythondir -- $PACKAGE directory under pythondir.  Was
-  dnl   PYTHON_SITE_PACKAGE in previous betas, but this naming is
-  dnl   more consistent with the rest of automake.
-  dnl   Maybe this should be put in python.am?
-
-  AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
-
-  dnl pyexecdir -- directory for installing python extension modules
-  dnl   (shared libraries)  Was PYTHON_SITE_EXEC in previous betas.
-
-  AC_SUBST([pyexecdir],
-	   [${PYTHON_EXEC_PREFIX}/lib/python${PYTHON_VERSION}/site-packages])
-
-  dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)
-  dnl   Maybe this should be put in python.am?
-
-  AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
-])
-
-
-# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
-# ---------------------------------------------------------------------------
-# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.
-# Run ACTION-IF-FALSE otherwise.
-# This test uses sys.hexversion instead of the string equivalant (first
-# word of sys.version), in order to cope with versions such as 2.2c1.
-# hexversion has been introduced in Python 1.5.2; it's probably not
-# worth to support older versions (1.5.1 was released on October 31, 1998).
-AC_DEFUN([AM_PYTHON_CHECK_VERSION],
- [prog="import sys, string
-# split strings by '.' and convert to numeric.  Append some zeros
-# because we need at least 4 digits for the hex conversion.
-minver = map(int, string.split('$2', '.')) + [[0, 0, 0]]
-minverhex = 0
-for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[[i]]
-sys.exit(sys.hexversion < minverhex)"
-  AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
-
-# Copyright 2001 Free Software Foundation, Inc.             -*- Autoconf -*-
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# AM_RUN_LOG(COMMAND)
-# -------------------
-# Run COMMAND, save the exit status in ac_status, and log it.
-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
-AC_DEFUN([AM_RUN_LOG],
-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
-   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
-   ac_status=$?
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   (exit $ac_status); }])
-

gramps/autogen.sh

@@ -1,96 +0,0 @@
-#!/bin/sh
-# Run this to generate all the initial makefiles, etc.
-# shamelessly borrowed and hacked from the Galeon source distribution
-
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
-
-PKG_NAME="gramps"
-
-(test -f $srcdir/configure.in \
-  && test -f $srcdir/src/gramps_main.py) || {
-    echo -n "**Error**: Directory "\`$srcdir\'" does not look like the"
-    echo " top-level $PKG_NAME directory"
-    exit 1
-}
-
-DIE=0
-
-
-(autoconf --version) < /dev/null > /dev/null 2>&1 || {
-  echo
-  echo "**Error**: You must have \`autoconf' installed to compile $PKG_NAME."
-  echo "Download the appropriate package for your distribution,"
-  echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
-  DIE=1
-}
-
-(automake --version) < /dev/null > /dev/null 2>&1 || {
-  echo
-  echo "**Error**: You must have \`automake' installed to compile $PKG_NAME."
-  echo "Get ftp://ftp.gnu.org/pub/gnu/automake/automake-1.6.tar.gz"
-  echo "(or a newer version if it is available)"
-  DIE=1
-  NO_AUTOMAKE=yes
-}
-
-
-# if no automake, don't bother testing for aclocal
-test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
-  echo
-  echo "**Error**: Missing \`aclocal'.  The version of \`automake'"
-  echo "installed doesn't appear recent enough."
-  echo "Get ftp://ftp.gnu.org/pub/gnu/automake/automake-1.6.tar.gz"
-  echo "(or a newer version if it is available)"
-  DIE=1
-}
-
-if test "$DIE" -eq 1; then
-  exit 1
-fi
-
-if test -z "$*"; then
-  echo "**Warning**: I am going to run \`configure' with no arguments."
-  echo "If you wish to pass any to it, please specify them on the"
-  echo \`$0\'" command line."
-  echo
-fi
-
-case $CC in
-xlc )
-  am_opt=--include-deps;;
-esac
-
-
-dr=$srcdir
-echo processing $dr
-( cd $dr
-  aclocalinclude="$ACLOCAL_FLAGS"
-  echo "Running aclocal $aclocalinclude ..."
-  aclocal $aclocalinclude || {
-  echo
-  echo "**Error**: aclocal failed. This may mean that you have not"
-  echo "installed all of the packages you need, or you may need to"
-  echo "set ACLOCAL_FLAGS to include \"-I \$prefix/share/aclocal\""
-  echo "for the prefix where you installed the packages whose"
-  echo "macros were not found"
-  exit 1
-      }
-
-  echo "Running automake --gnu $am_opt ..."
-  automake --add-missing --gnu $am_opt ||
-    { echo "**Error**: automake failed."; exit 1; }
-      echo "Running autoconf ..."
-      autoconf || { echo "**Error**: autoconf failed."; exit 1; }
-) || exit 1
-
-  echo "Setting py-compile script executable ..."
-  chmod 755 py-compile
-  
-if test x$NOCONFIGURE = x; then
-  echo Running $srcdir/configure $conf_flags "$@" ...
-  $srcdir/configure $conf_flags "$@" \
-  && echo Now type \`make\' to compile $PKG_NAME || exit 1
-else
-  echo Skipping configure process.
-fi

gramps/configure.in

@@ -1,348 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-dnl May need to run automake && aclocal first
-AC_INIT(src/gramps.py)
-AM_INIT_AUTOMAKE(gramps, 0.8.1)
-RELEASE=pl1
-
-VERSIONSTRING=$VERSION
-if test x"$RELEASE" != "x"
-then
-  VERSIONSTRING="$VERSION-$RELEASE"
-fi
-
-AC_SUBST(PACKAGE)
-AC_SUBST(VERSION)
-AC_SUBST(RELEASE)
-AC_SUBST(VERSIONSTRING)
-
-AC_PATH_PROG(MSGFMT, msgfmt)
-AC_SUBST(MSGFMT)
-
-LANGUAGES="sv de fr es it pt_BR ru da_DK cs pl"
-AC_SUBST(LANGUAGES)
-
-DISTLANGS=
-POFILES=
-MOFILES=
-for lang in $LANGUAGES; do
- POFILES="$POFILES $lang.po"
- MOFILES="$MOFILES $lang.mo"
-done
-AC_SUBST(POFILES)
-AC_SUBST(MOFILES)
-
-dnl Checks for programs.  
-dnl We first only check for python >= 1.5
-AM_PATH_PYTHON(1.5)
-
-dnl override automatic python detection with our own place
-pythondir=\${prefix}/share
-pyexecdir=\${prefix}/share
-pkgpythondir=\${prefix}/share/\${PACKAGE}
-pkgpyexecdir=\${prefix}/share/\${PACKAGE}
-
-AC_PATH_PROG(BINSH, sh)
-
-changequote(<<, >>)dnl
-PYTHON_VERSION=`$PYTHON -c "import sys; print sys.version[:3]"`
-changequote([, ])dnl
-
-if test "$PYTHON_VERSION" != "1.5" 
-then
-	AC_PATH_PROG(PYTHON15, python1.5)
-else
-	PYTHON15=$PYTHON
-fi
-
-if test "$PYTHON_VERSION" != "2.0" 
-then
-	AC_PATH_PROG(PYTHON20, python2.0)
-else
-	PYTHON20=$PYTHON
-fi
-
-if test "$PYTHON_VERSION" != "2.1" 
-then
-	AC_PATH_PROG(PYTHON21, python2.1)
-else
-	PYTHON21=$PYTHON
-fi
-
-if test "$PYTHON_VERSION" != "2.2" 
-then
-	AC_PATH_PROG(PYTHON22, python2.2)
-else
-	PYTHON22=$PYTHON
-fi
-
-AC_PATH_PROG(ZIP, zip)
-
-AC_PROG_INSTALL
-AC_PROG_MAKE_SET
-
-AC_PROG_CC
-
-AC_CHECK_HEADER(libintl.h)
-
-AC_CHECK_LIB(c,textdomain,LIBS="",
- [ AC_CHECK_LIB(intl,textdomain,
-	LIBS="-lintl",
-	AC_MSG_ERROR("Could not find internationalization libraries"))
-        ])
-
-dnl Check for programs
-
-AC_CHECK_PROG(HAVE_GNOME_CONFIG, gnome-config, "YES", "NO")
-GNOMEHELP=`gnome-config --prefix`
-
-dnl Check if python bindings for gtk are installed
-
-AC_MSG_CHECKING(Python bindings for sax/xml)
-changequote(,)
-cat > conftest.py <<EOF
-try:
-    from xml.sax import make_parser, handler
-    f = open("conftest.out", "w")
-    f.write("YES")
-    f.close()
-except ImportError:
-
-    try:
-        from _xmlplus.sax import make_parser, handler
-        f = open("conftest.out", "w")
-        f.write("YES")
-        f.close()
-    except ImportError:
-        f = open("conftest.out", "w")
-        f.write("NO")
-        f.close()
-EOF
-changequote([, ])
-$PYTHON conftest.py
-has_sax=`cat conftest.out`
-rm -f conftest.out conftest.py
-if test "YES" != $has_sax
-then
-   AC_MSG_ERROR([
-
-**** The python interpreter can't find the SAX/XML bindings.])
-fi
-AC_MSG_RESULT(ok)
-
-AC_MSG_CHECKING(Python bindings for gtk+)
-changequote(,)
-cat > conftest.py <<EOF
-try:
-    import gtk
-    f = open("conftest.out", "w")
-    f.write("YES")
-    f.close()
-except ImportError:
-    f = open("conftest.out", "w")
-    f.write("NO")
-    f.close()
-EOF
-changequote([, ])
-$PYTHON conftest.py
-has_pygtk=`cat conftest.out`
-rm -f conftest.out conftest.py
-if test "YES" != $has_pygtk
-then
-   AC_MSG_ERROR([
-
-**** The python interpreter can't find the python bindings for gtk.])
-fi
-AC_MSG_RESULT(ok)
-
-AC_MSG_CHECKING(Python bindings for GNOME)
-changequote(,)
-cat > conftest.py <<EOF
-try:
-    import gnome, gnome.ui
-    f = open("conftest.out", "w")
-    f.write("YES")
-    f.close()
-except ImportError:
-    f = open("conftest.out", "w")
-    f.write("NO")
-    f.close()
-EOF
-changequote([, ])
-$PYTHON conftest.py
-has_pygnome=`cat conftest.out`
-rm -f conftest.out conftest.py
-if test "YES" != $has_pygnome
-then
-   AC_MSG_ERROR([
-
-**** The python interpreter can't find the python bindings for GNOME.])
-fi
-AC_MSG_RESULT(ok)
-
-AC_MSG_CHECKING(Python/libglade bindings)
-changequote(,)
-cat > conftest.py <<EOF
-try:
-    import libglade
-    f = open("conftest.out", "w")
-    f.write("YES")
-    f.close()
-except ImportError:
-    f = open("conftest.out", "w")
-    f.write("NO")
-    f.close()
-EOF
-changequote([, ])
-$PYTHON conftest.py
-has_pygtk=`cat conftest.out`
-rm -f conftest.out conftest.py
-if test "YES" != $has_pygtk
-then
-   AC_MSG_ERROR([
-
-**** The python interpreter can't find the python bindings for libglade.])
-fi
-AC_MSG_RESULT(ok)
-
-AC_MSG_CHECKING(Python/GNOME bindings for libglade)
-changequote(,)
-cat > conftest.py <<EOF
-try:
-    import _gladegnome
-    f = open("conftest.out", "w")
-    f.write("YES")
-    f.close()
-except ImportError:
-    f = open("conftest.out", "w")
-    f.write("NO")
-    f.close()
-EOF
-changequote([, ])
-$PYTHON conftest.py
-has_pygtk=`cat conftest.out`
-rm -f conftest.out conftest.py
-if test "YES" != $has_pygtk
-then
-   AC_MSG_ERROR([
-
-**** The python interpreter can't find the GNOME bindings for libglade.])
-fi
-AC_MSG_RESULT(ok)
-
-dnl Checks for libraries.
-
-dnl Checks for header files.
-
-AC_MSG_CHECKING(for headers required to compile python extensions)
-
-if test "$PYTHON15" != ""; then
-  py_prefix=`$PYTHON15 -c "import sys; print sys.prefix"`
-  py_exec_prefix=`$PYTHON15 -c "import sys; print sys.exec_prefix"`
-  P15_INCLUDES="-I${py_prefix}/include/python1.5"
-  if test -f "${py_exec_prefix}/include/python1.5/Python.h"
-  then
-    INTLLIBS="intl15.so "
-  fi
-fi
-
-if test "$PYTHON20" != ""; then
-  py_prefix=`$PYTHON20 -c "import sys; print sys.prefix"`
-  py_exec_prefix=`$PYTHON20 -c "import sys; print sys.exec_prefix"`
-  P20_INCLUDES="-I${py_prefix}/include/python2.0"
-  if test -f "${py_exec_prefix}/include/python2.0/Python.h"
-  then
-    INTLLIBS="${INTLLIBS}intl20.so "
-  fi
-fi
-
-if test "$PYTHON21" != ""; then
-  py_prefix=`$PYTHON21 -c "import sys; print sys.prefix"`
-  py_exec_prefix=`$PYTHON21 -c "import sys; print sys.exec_prefix"`
-  P21_INCLUDES="-I${py_prefix}/include/python2.1"
-  if test "$py_prefix" != "$py_exec_prefix"; then
-    P21_INCLUDES="$P21_INCLUDES -I${py_exec_prefix}/include/python2.1" 
-  fi
-  if test -f "${py_exec_prefix}/include/python2.1/Python.h"
-  then
-    INTLLIBS="${INTLLIBS}intl21.so "
-  fi
-fi
-
-if test "$PYTHON22" != ""; then
-  py_prefix=`$PYTHON22 -c "import sys; print sys.prefix"`
-  py_exec_prefix=`$PYTHON22 -c "import sys; print sys.exec_prefix"`
-  P22_INCLUDES="-I${py_prefix}/include/python2.2"
-  if test "$py_prefix" != "$py_exec_prefix"; then
-    P22_INCLUDES="$P22_INCLUDES -I${py_exec_prefix}/include/python2.2" 
-  fi
-  if test -f "${py_exec_prefix}/include/python2.2/Python.h"
-  then
-    INTLLIBS="${INTLLIBS}intl22.so "
-  fi
-fi
-
-AC_MSG_RESULT(ok)
-
-dnl ======================================================
-dnl == Modern documentation tools (scrollkeeper) checks
-dnl == We may need a more recent version (GNOME2 will use
-dnl == scrollkeeper > 0.3) but basic scrollkeeper instructions
-dnl == use 0.1.4 example so we'll just check for that
-dnl ======================================================
-SCROLLKEEPER_REQUIRED=0.1.4
-AC_SUBST(SCROLLKEEPER_REQUIRED)
-
-dnl First see that *some* version of scrollkeeper is installed
-AC_PATH_PROG(SCROLLKEEPER_CONFIG, scrollkeeper-config, no)
-if test x$SCROLLKEEPER_CONFIG = xno; then
-  AC_MSG_ERROR(Couldn't find scrollkeeper-config.  Please install the scrollkeeper package.)
-  DISABLE_SCROLLKEEPER=1
-  AC_SUBST(DISABLE_SCROLLKEEPER)
-fi
-
-dnl ======================================================
-dnl == GNOME modified DTD's need jw, not db2html
-dnl ======================================================
-AC_PATH_PROG(JW, jw, no) 
-if test x$JW = xno; then
-  HAVE_JW="no"
-else
-  HAVE_JW="yes"
-fi
-AC_SUBST(HAVE_JW)
-
-dnl ======================================================
-dnl == end of modern doc tests
-dnl ======================================================
-
-
-AC_SUBST(BINSH)
-AC_SUBST(PYTHON)
-AC_SUBST(PYTHON_VERSION)
-AC_SUBST(GNOMEHELP)
-AC_SUBST(LIBS)
-
-AC_SUBST(P15_INCLUDES)
-AC_SUBST(P20_INCLUDES)
-AC_SUBST(P21_INCLUDES)
-AC_SUBST(P22_INCLUDES)
-AC_SUBST(INTLLIBS)
-
-AC_OUTPUT([
-Makefile 
-src/Makefile
-src/const.py
-src/docgen/Makefile
-src/filters/Makefile
-src/plugins/Makefile
-src/data/Makefile
-src/data/templates/Makefile
-src/po/Makefile
-doc/Makefile
-doc/gramps-manual/Makefile
-doc/gramps-manual/C/Makefile
-doc/extending-gramps/Makefile
-doc/extending-gramps/C/Makefile
-omf-install/Makefile
-gramps.spec
-gramps.sh])

gramps/doc/Makefile.am

@@ -1,11 +0,0 @@
-# Process this file with automake to produce Makefile.in
-
-SUBDIRS = gramps-manual extending-gramps
-
-man_IN_FILES = gramps.1.in
-man_MANS = ${man_IN_FILES:.1.in=.1}
-
-EXTRA_DIST = $(man_MANS) $(man_IN_FILES) sgmldocs.make
-
-gramps.1: $(top_builddir)/config.status gramps.1.in
-	cd $(top_builddir) && CONFIG_FILES=doc/$@ $(SHELL) ./config.status

gramps/doc/Makefile.in

@@ -1,412 +0,0 @@
-# Makefile.in generated by automake 1.6.2 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Process this file with automake to produce Makefile.in
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-AWK = @AWK@
-BINSH = @BINSH@
-CC = @CC@
-DEPDIR = @DEPDIR@
-DISABLE_SCROLLKEEPER = @DISABLE_SCROLLKEEPER@
-GNOMEHELP = @GNOMEHELP@
-HAVE_GNOME_CONFIG = @HAVE_GNOME_CONFIG@
-HAVE_JW = @HAVE_JW@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-JW = @JW@
-LANGUAGES = @LANGUAGES@
-LIBS = @LIBS@
-MOFILES = @MOFILES@
-MSGFMT = @MSGFMT@
-P15_INCLUDES = @P15_INCLUDES@
-P20_INCLUDES = @P20_INCLUDES@
-P21_INCLUDES = @P21_INCLUDES@
-P22_INCLUDES = @P22_INCLUDES@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-PYTHON = @PYTHON@
-PYTHON15 = @PYTHON15@
-PYTHON20 = @PYTHON20@
-PYTHON21 = @PYTHON21@
-PYTHON22 = @PYTHON22@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
-SCROLLKEEPER_REQUIRED = @SCROLLKEEPER_REQUIRED@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VERSIONSTRING = @VERSIONSTRING@
-ZIP = @ZIP@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-
-SUBDIRS = gramps-manual extending-gramps
-
-man_IN_FILES = gramps.1.in
-man_MANS = ${man_IN_FILES:.1.in=.1}
-
-EXTRA_DIST = $(man_MANS) $(man_IN_FILES) sgmldocs.make
-subdir = doc
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-NROFF = nroff
-MANS = $(man_MANS)
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-	uninstall-info-recursive all-recursive install-data-recursive \
-	install-exec-recursive installdirs-recursive install-recursive \
-	uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = Makefile.am Makefile.in
-DIST_SUBDIRS = $(SUBDIRS)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/Makefile
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-
-man1dir = $(mandir)/man1
-install-man1: $(man1_MANS) $(man_MANS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    1*) ;; \
-	    *) ext='1' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
-	done
-uninstall-man1:
-	@$(NORMAL_UNINSTALL)
-	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.1*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
-	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
-	done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$(top_distdir)" \
-	        distdir=../$(distdir)/$$subdir \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(MANS)
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-info-am uninstall-man
-
-uninstall-info: uninstall-info-recursive
-
-uninstall-man: uninstall-man1
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
-	clean-generic clean-recursive distclean distclean-generic \
-	distclean-recursive distclean-tags distdir dvi dvi-am \
-	dvi-recursive info info-am info-recursive install install-am \
-	install-data install-data-am install-data-recursive \
-	install-exec install-exec-am install-exec-recursive \
-	install-info install-info-am install-info-recursive install-man \
-	install-man1 install-recursive install-strip installcheck \
-	installcheck-am installdirs installdirs-am \
-	installdirs-recursive maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-recursive tags tags-recursive uninstall \
-	uninstall-am uninstall-info-am uninstall-info-recursive \
-	uninstall-man uninstall-man1 uninstall-recursive
-
-
-gramps.1: $(top_builddir)/config.status gramps.1.in
-	cd $(top_builddir) && CONFIG_FILES=doc/$@ $(SHELL) ./config.status
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

gramps/doc/extending-gramps/C/Makefile.am

@@ -1,10 +0,0 @@
-SGML_FILES = 
-
-figs = 
-
-docname = extending-gramps
-lang = C
-omffile = extending-gramps-C.omf
-sgml_ents = 
-include ${top_srcdir}/doc/sgmldocs.make
-dist-hook: app-dist-hook

gramps/doc/extending-gramps/C/Makefile.in

@@ -1,243 +0,0 @@
-# Makefile.in generated by automake 1.6.2 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../../..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-AWK = @AWK@
-BINSH = @BINSH@
-CC = @CC@
-DEPDIR = @DEPDIR@
-DISABLE_SCROLLKEEPER = @DISABLE_SCROLLKEEPER@
-GNOMEHELP = @GNOMEHELP@
-HAVE_GNOME_CONFIG = @HAVE_GNOME_CONFIG@
-HAVE_JW = @HAVE_JW@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-JW = @JW@
-LANGUAGES = @LANGUAGES@
-LIBS = @LIBS@
-MOFILES = @MOFILES@
-MSGFMT = @MSGFMT@
-P15_INCLUDES = @P15_INCLUDES@
-P20_INCLUDES = @P20_INCLUDES@
-P21_INCLUDES = @P21_INCLUDES@
-P22_INCLUDES = @P22_INCLUDES@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-PYTHON = @PYTHON@
-PYTHON15 = @PYTHON15@
-PYTHON20 = @PYTHON20@
-PYTHON21 = @PYTHON21@
-PYTHON22 = @PYTHON22@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
-SCROLLKEEPER_REQUIRED = @SCROLLKEEPER_REQUIRED@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VERSIONSTRING = @VERSIONSTRING@
-ZIP = @ZIP@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-SGML_FILES = 
-
-figs = 
-
-docname = extending-gramps
-lang = C
-omffile = extending-gramps-C.omf
-sgml_ents = 
-subdir = doc/extending-gramps/C
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DIST_COMMON = Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/extending-gramps/C/Makefile
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="${top_distdir}" distdir="$(distdir)" \
-	  dist-hook
-check-am: all-am
-check: check-am
-all-am: Makefile
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am info info-am install \
-	install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic uninstall uninstall-am uninstall-info-am
-
-include ${top_srcdir}/doc/sgmldocs.make
-dist-hook: app-dist-hook
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

gramps/doc/extending-gramps/C/extending-gramps-C.omf

@@ -1,17 +0,0 @@
-<?xml version="1.0" standalone="no"?>
-<omf>
-  <resource>
-    <creator>
-     Donald N. Allingham (dallingham@users.sourceforge.net)
-    </creator>
-    <title>
-      Writing GRAMPS Extensions
-    </title>
-    <date>2002-03-29</date>
-    <subject category="GNOME|Applications"/>
-    <format mime="text/sgml"/>
-    <identifier url="extending-gramps.sgml"/>
-    <language code="C"/>
-    <relation seriesid="6d396638-bc35-11d6-8a4f-87450c73d5e0"/>
-  </resource>
-</omf>

gramps/doc/extending-gramps/C/extending-gramps.sgml

@@ -1,774 +0,0 @@
-<!DOCTYPE article PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN"[
-<!ENTITY version "0.5.0"> <!-- replace with application version -->
-]>
-
-<!-- =============Document Header ============================= -->
-
-<article id="index"> <!-- please do not change the id -->
-
-  <artheader>
-    <title>Writing Extentions for gramps</title>
-    <copyright>
-      <year>2001</year>
-      <holder>Donald N. Allingham</holder>
-    </copyright>
-
-  <!-- translators: uncomment this:
-
-  <copyright>
-   <year>2001</year>
-   <holder>ME-THE-TRANSLATOR (Latin translation)</holder>
-  </copyright>
-
-   -->
-
-  <!-- do not put authorname in the header except in copyright - use
-  section "authors" below -->
-
-  <!-- Use this legal notice for online documents which depend on -->
-  <!-- core GNOME packages.                                       -->
-  <legalnotice id="legalnotice">
-    <para>
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the <ulink type="help"
-    url="gnome-help:fdl"><citetitle>GNU Free Documentation
-    License</citetitle></ulink>, Version 1.1 or any later version
-    published by the Free Software Foundation with no Invariant
-    Sections, no Front-Cover Texts, and no Back-Cover Texts.  A copy
-    of the license can be found <ulink type="help"
-    url="gnome-help:fdl">here</ulink>.
-    </para>
-    <para>
-    Many of the names used by companies to distinguish their products
-    and services are claimed as trademarks. Where those names appear
-    in any GNOME documentation, and those trademarks are made aware to
-    the members of the GNOME Documentation Project, the names have
-    been printed in caps or initial caps.
-    </para>
-  </legalnotice>
-
-  <!-- Use this legal notice for documents which are placed on  -->
-  <!-- the web, shipped in any way other than online documents  -->
-  <!-- (eg. PS, PDF, or RTF), or which do not depend on the     -->
-  <!-- core GNOME distribution.                                 -->
-  <!--                                                          -->
-  <!-- If you use this version, you must place the following    -->
-  <!-- line in the document declaration at the top of your      -->
-  <!-- document:                                                -->
-  <!--   <!ENTITY FDL SYSTEM "fdl.sgml">                        -->
-  <!-- and the following line at the bottom of your document    -->
-  <!-- after the last </sect1>.                                 -->
-  <!--   &FDL;                                                  -->
-  <!--
-  <legalnotice id="legalnotice">
-    <para>
-    Permission is granted to copy, distribute and/or modify this
-    document under the terms of the <link linkend="fdl"><citetitle>GNU
-    Free Documentation License</citetitle></link>, Version 1.1 or any
-    later version published by the Free Software Foundation with no
-    Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
-    A copy of the license can be found in <xref linkend="fdl">.
-    </para>
-    <para>
-    Many of the names used by companies to distinguish their products
-    and services are claimed as trademarks. Where those names appear
-    in any GNOME documentation, and those trademarks are made aware to
-    the members of the GNOME Documentation Project, the names have
-    been printed in caps or initial caps.
-    </para>
-  </legalnotice>
-  -->
-
-  <!-- This is the manual version, not application version. --> 
-    <releaseinfo>
-       This is version 1.0 of the Writing Extentions for gramps manual.
-    </releaseinfo>
-
-  </artheader>
-
-<!-- ============= Introduction ============================== -->
-  <sect1 id="intro">
-    <title>Introduction</title>
-    <para>
-    <application>gramps</application> was intended from the start to
-    allow the user to extend it through a plugin system. Five types of
-    plugins are supported - filters, reports, tools, import filters,
-    and export filters. In a way, an export filter can be viewed as a
-    special type of report, and an import filter can be viewed as a
-    special type of tool.
-    </para>
-    <para>
-    All plugins are written in the <application>python</application>
-    language.
-    </para>
-    <sect2 id="intro-filter">
-      <title>Filters</title>
-      <para>
-      A filter is a plugin that be used to temporarily display or hide
-      individuals in the <interface>People View</interface>. The
-      filter is the simplest form of plugin, which only needs to
-      determine if a person meets or fails to meet its criteria. It
-      operates on a single person at a time.
-      </para>
-      <para>
-      Filters should never alter a database.
-      </para>
-    </sect2>
-    <sect2 id="intro-report">
-      <title>Reports</title>
-      <para>
-      A report is a plugin that generates output. The output may be in
-      either a interactive, graphical form, or as an output
-      file. Report plugins are passed a reference to the internal
-      database and a reference to the active person, which allows the
-      plugn to operate on a single person, the entire database, or
-      anything in between.
-      </para>
-      <para>
-      Plugins that conform to the reportplugin interface appear in the
-        <menuchoice>
-          <guimenu>Reports</guimenu>
-        </menuchoice>
-      menu and in the <interface>Report Selection</interface> dialog
-      box.
-      </para>
-      <para>
-      A report should never alter the database.
-      </para>
-    </sect2>
-    <sect2 id="intro-tool">
-      <title>Tools</title>
-      <para>
-      A tool is a plugin that alters the database. It may perform
-      something as small changing the case of some text to something
-      as complex as merging redundant individuals. Tools plugins are
-      passed a reference to the internal database, the active person,
-      and a callback function. The callback function is used to notify
-      the main program if it needs to update the display with any
-      modified information.
-      </para>
-      <para>
-      Plugins that conform to the tool plugin interface appear in the
-        <menuchoice>
-          <guimenu>Tools</guimenu>
-        </menuchoice>
-      menu and in the <interface>Tool Selection</interface> dialog
-      box.
-      </para>
-      <para>
-      A tool is allowed (and usually expected) to alter the database.
-      </para>
-    </sect2>
-    <sect2 id="intro-import">
-      <title>Import Filters</title>
-      <para>
-      An import filter is a plugin that adds information from another
-      source to the database. It is similar to a tool, but is called
-      differently to allow gramps to distinguish it from a tool.
-      </para>
-      <para>
-      Plugins that conform to the import filter calling syntax appear
-      in the
-        <menuchoice>
-          <guimenu>File</guimenu>
-          <guisubmenu>Import</guisubmenu>
-        </menuchoice>
-      menu.
-      </para>
-      <para>
-      An import filter is allowed to modify the database.
-      </para>
-    </sect2>
-    <sect2 id="intro-export">
-      <title>Export Filters</title>
-      <para>
-      An export filter is a plugin that translates the gramps database
-      into the format expected by another program. Since it generates
-      an output file, it is similar to a report generator. However,
-      its calling syntax is different, so that gramps knows how to
-      distiguish it from a report generator.
-      </para>
-      <para>
-      Plugins that conform to the export filter calling syntax appear
-      in the
-        <menuchoice>
-          <guimenu>File</guimenu>
-          <guisubmenu>Export</guisubmenu>
-        </menuchoice>
-      menu.
-      </para>
-      <para>
-      An export filter should not alter the database.
-      </para>
-    </sect2>
-  </sect1>
-
-<!-- ============= Writing Filters ============================= -->
-
-  <sect1 id="writingfilters">
-    <title>Writing Filters</title>
-    <para>
-    Users can create their own filters and add them to
-    <application>gramps</application>.  By adding the filter to the
-    user's private filter directory (<filename
-    class="directory">~/.gramps/filters</filename>), the filter will
-    be automatically recognized the next time that the program is
-    started.
-    </para>
-    <sect2 id="createfilter">
-      <title>Creating a filter</title>
-      <para>
-      Each filter is a class derived from the
-      <function>Filter.Filter</function> class.  The
-      <function>__init__</function> task may be overridden, but if so,
-      should call the <function>__init__</function> function on the
-      <function>Filter.Filter</function> class.  The parent class
-      provides the variable <function>self.text</function>, which
-      contains the text string passed as the qualifier.  This string
-      provides additional information provided by the user. For
-      example, if the filter is used to match names, the qualifier
-      would be used to provide the name that is being compared
-      against.
-      </para>
-      <para>
-      All filter classes must define a <function>match</function>
-      function. The function takes one argument (other than
-      <function>self</function>), which is an object of type
-      <function>Person</function> to compare against. The function
-      should return a 1 if the person matches the filter, or a zero if
-      the person does not.
-      </para>
-      <para>
-      Each filter must be registered, so that
-      <application>gramps</application> knows about it. This is
-      accomplished by calling the
-      <function>Filter.register_filter</function> function. This
-      function takes three arguments - the filter class, a
-      description, and flag that indicates if the qualifier string is
-      needed. The description string appears in the pull down
-      interface within <application>gramps</application>, and helps
-      the user choose the appropriate filter. The qualifier flag tells
-      <application>gramps</application> whether or not the filter
-      needs a qualifier string. If this flag is 0,
-      <application>gramps</application> will disable the entry of a
-      qualifier string.
-      </para>
-      <figure id="filtersrc">
-        <title>Sample filter implementation</title>
-        <programlisting>
-
-import Filter
-import string
-
-# class definition
-
-class SubString(Filter.Filter):
-
-    def match(self,person):
-        name = person.getPrimaryName().getName()
-        return string.find(name,self.text) >= 0
-
-Filter.register_filter(SubString,
-                       description="Names that contain a substring",
-	               qualifier=1)
-
-        </programlisting>
-      </figure>
-    </sect2>
-  </sect1>
-
-<!-- ============= Writing Reports ============================= -->
-
-  <sect1 id="writingreports">
-    <title>Writing Reports</title>
-    <para>
-    Users can create their own report generators and add them to
-    <application>gramps</application>.  By adding the report generator
-    to the user's private plugin directory (<filename
-    class="directory">~/.gramps/plugins</filename>), the report
-    generator will be automatically recognized the next time that the
-    program is started.
-    </para>
-    <sect2 id="createreport">
-      <title>Creating a report generator</title>
-      <para>
-      Fewer restrictions are made on report generators than on
-      filters.  The report generator is passed the current
-      <application>gramps</application> database and the active
-      person.  The generator needs to take special care to make sure
-      that it does not alter the database in anyway.
-      </para>
-      <para>
-      A report generator is a function that takes two arguments
-      &mdash; a database (of type <function>RelDataBase</function>)
-      and the currently selected person (of type
-      <function>Person</function>). When called, this task should
-      generate the desired report.
-      </para>
-      <para>
-      This function's implementation can be as simple as generating
-      output without the user's intervention, or it could display a
-      graphical interface to allow the user to select options and
-      customize a report.
-      </para>
-      <para>
-      As with filters, the report generator must be registered before
-      <application>gramps</application> will understand it. The report
-      generator is registered using the
-      <function>Plugins.register_report</function>. This function
-      takes five arguments.
-      </para>
-      <itemizedlist>
-        <listitem>
-	  <para>
-	  <guilabel>The report generation task</guilabel> This task
-	  that generates the report.
-	  </para>
-	</listitem>
-	<listitem>
-	  <para>
-	  <guilabel>The report category</guilabel> The category in
-	  which the report is grouped in the
-	  <menuchoice><guimenu>Reports</guimenu></menuchoice> menu and
-	  in the <interface>Report Selection</interface> dialog.
-	  </para>
-	</listitem>
-	<listitem>
-	  <para>
-	  <guilabel>The report name</guilabel>
-	  The name of the report.
-	  </para>
-	</listitem>
-	<listitem>
-	  <para>
-	  <guilabel>A text description of the report</guilabel> The
-	  description appears in the report selection tool to provide
-	  the user with a description of what the tools does.
-	  </para>
-	</listitem>
-	<listitem>
-	  <para>
-	  <guilabel>A graphic logo in XPM format</guilabel> This may
-	  be either a path to a filename, or a list of strings
-	  containting the XPM data. If a filename is specified, care
-	  must be taken to make sure the file location is relocatable
-	  and can be determined at runtime.
-	  </para>
-	</listitem>
-      </itemizedlist> 
-      <para>
-      While only the task and report name are required, it is
-      recommended to provide all five parameters.
-      </para>
-      <figure id="reportsrc">
-        <title>Sample report implementation</title>
-        <programlisting>
-
-import Plugins
-
-def report(database,person):
-   ... actual code ...
-
-Plugins.register_report(
-    task=report,
-    category="Category",
-    name="Report Name",
-    description="A text descripition of the report generator",
-    xpm="%s/myfile.xpm" % os.path.dirname(__file__)
-)
-        </programlisting>
-      </figure>
-    </sect2>
-    <sect2 id="alittlehelp">
-      <title>A little help - Format Interfaces</title>
-      <para>
-      <application>gramps</application> provides some help with
-      writing reports.  Several generic python classes exist that aid
-      in the writing of report generators.  These classes provide an
-      abstract interface for a type of document, such as a drawing,
-      word processor document, or a spreadsheet.  From these core
-      classes, <application>gramps</application> derives interfaces to
-      various document formats.  This means that by coding to the
-      generic word processing class (<function>TextDoc</function>), a
-      report generator can instant access to multiple file formats
-      (such as HTML, OpenOffice, and AbiWord).
-      </para>
-      <para>
-      This scheme of deriving a output format from a generic base
-      class also makes it easier to add new formats. Creating a new
-      derivied class targeting a different format (such as
-      <application>KWord</application> or
-      <application>LaTeX</application>) makes it easy for existing
-      report generators to use the new formats.
-      </para>
-    </sect2>
-  </sect1>
-
-<!-- ============= Writing Tools ============================= -->
-
-  <sect1 id="writingtools">
-    <title>Writing Tools</title>
-    <para>
-    Users can create their own tools and add them to
-    <application>gramps</application>.  By adding the tool to the
-    user's private plugin directory (<filename
-    class="directory">~/.gramps/plugins</filename>), the tool will be
-    automatically recognized the next time that
-    <application>gramps</application> is started.
-    </para>
-    <para>
-    Unlike a report generator, a tool is allowed to modify the
-    database.  The tool is passed the current
-    <application>gramps</application> database, the active person,
-    and a callback function.  The callback function should be called
-    with a non-zero argument upon completion of the tool if the
-    database has been altered.
-    </para>
-    <para>
-    As with filters and report generators, tools must be registered
-    before <application>gramps</application> will understand it. The
-    tool is registered using the
-    <function>Plugins.register_tool</function>. This function takes
-    four arguments.
-    </para>
-    <itemizedlist>
-      <listitem>
-        <para>
-	<guilabel>The tool task</guilabel> This task
-	that executes the tool.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	<guilabel>The tool category</guilabel> The category in which
-	the tool is grouped in the
-	<menuchoice><guimenu>Tools</guimenu></menuchoice> menu and in
-	the <interface>Tool Selection</interface> dialog.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	<guilabel>The tool name</guilabel>
-	The name of the tool.
-	</para>
-      </listitem>
-      <listitem>
-	<para>
-	<guilabel>A text description of the tool</guilabel> The
-	description appears in the Tool Selection dialog to provide
-	the user with a description of what the tool does.
-	</para>
-      </listitem>
-    </itemizedlist> 
-    <para>
-    While only the task and report name are required, it is
-    recommended to provide all five parameters.
-    </para>
-    <figure id="toolsrc">
-      <title>Sample tool implementation</title>
-      <programlisting>
-
-import Plugins
-
-def tool(database,person,callback):
-   ... actual code ...
-   callback(1)
-
-Plugins.register_tool(
-    task=tool,
-    category="Category",
-    name="Tool Name",
-    description="A text descripition of the tool"
-)
-      </programlisting>
-    </figure>
-  </sect1>
-
-<!-- ============= Import Filters ============================= -->
-
-  <sect1 id="writingimportfilters">
-    <title>Writing Import Filters</title>
-    <para>
-    Import filters are similar to tools, since they are allowed to
-    modify the databases. An import filter is a task that accepts
-    three arguments &mdash; a database, the filename of the file that
-    is to be imported, and a callback function.
-    </para>
-    <para>
-    The database may or may not have data already in it. The import
-    filter cannot assume that data neither already exists nor that the
-    database is empty.
-    </para>
-    <para>
-    The callback function is different from the callback function used
-    for tools. The import filter's callback function is used to
-    indicate progress and update the status bar during the import
-    process. The function takes a value between 0.0 and 1.0, where 0.0
-    represents the start of the import and 1.0 represents the
-    completion of the import.
-    </para>
-    <para>
-    As with the other plugin types, an import filter must be
-    registered with <application>gramps</application>. This is
-    accomplished by calling the
-    <function>Plugins.register_import</function> task. The
-    <function>Plugins.register_import</function> accepts two arguments
-    &mdash; the function the performs the import and a string
-    providing a brief description. This description is used as the
-    menu entry under the
-    <menuchoice>
-      <guimenu>File</guimenu>
-      <guisubmenu>Import</guisubmenu>
-    </menuchoice>
-    menu.
-    </para>
-    <figure id="importexample">
-      <title>Sample Import Implementation</title>
-      <programlisting>
-
-import Plugins
-
-def gedcom_import(database,filename,callback):
-    ... actual code ...
-
-Plugins.register_import(gedcom_import,"GEDCOM import")
-
-      </programlisting>
-    </figure>
-  </sect1>
-
-<!-- ============= Export Filters ============================= -->
-
-  <sect1 id="writingexportfilters">
-    <title>Writing Export Filters</title>
-    <para>
-    Export filters are similar to report generators. They are not
-    allowed to modify the database. An export filter accepts three
-    arguments &mdash; a database, the filename of the file that is to
-    be written, and a callback function.
-    </para>
-    <para>
-    The callback function is indentical from the callback function
-    used for import filters. The export filter's callback function is
-    used to indicate progress and update the status bar during the
-    export process. The function takes a value between 0.0 and 1.0,
-    where 0.0 represents the start of the export and 1.0 represents
-    the completion of the export.
-    </para>
-    <para>
-    As with the other plugin types, an export filter must be
-    registered with <application>gramps</application>. This is
-    accomplished by calling the
-    <function>Plugins.register_export</function> task. The
-    <function>Plugins.register_export</function> accepts two arguments
-    &mdash; the function the performs the import and a string
-    providing a brief description. This description is used as the
-    menu entry under the
-    <menuchoice>
-      <guimenu>File</guimenu>
-      <guisubmenu>Export</guisubmenu>
-    </menuchoice>
-    menu.
-    </para>
-    <figure id="exportexample">
-      <title>Sample Export Implementation</title>
-      <programlisting>
-
-import Plugins
-
-def gedcom_export(database,filename,callback):
-    ... actual code ...
-
-Plugins.register_export(gedcom_export,"GEDCOM export")
-
-      </programlisting>
-    </figure>
-  </sect1>
-  <sect1 id="commontasks">
-    <title>Common tasks</title> 
-    <para>
-    While this manual does not document the
-    <application>gramps</application> database interface, this section
-    shows a few common tasks.
-    </para>
-    <sect2 id="gettingnames">
-      <title>Printing names of people</title>
-      <para>
-      This example shows how to display the name of people in the
-      database. It assumes that the database is called
-      <function>db</function>. To get a list of people, it calls the
-      <function>getPersonMap</function> method, which returns a map of
-      <application>gramps</application> ID to
-      <function>Person</function> objects. Calling the
-      <function>valus</function> method of the returned map returns a
-      list of people. For each person, the primary name is extracted,
-      and then the <function>Name</function> object's
-      <function>getName</function> method is called to build a
-      presentable name from the individual name components.
-      </para>
-      <figure id="displaynames">
-        <title>Displaying names</title>
-        <programlisting>
-
-for person in db.getPersonMap().values():
-    name = person.getPrimaryName()
-    print name.getName()
-
-	</programlisting>
-      </figure>
-    </sect2>
-    <sect2 id="listingevents">
-      <title>Displaying the events of person</title>
-      <para>
-      This example shows how to display the public events associated
-      with a person. It assumes that the person is called
-      <function>person</function>.
-      </para>
-      <figure id="eventexample">
-        <title>Displaying Event Information</title>
-        <programlisting>
-
-for event in person.getEventList():
-    if event.getPrivacy() == 0:
-        print "Event:",event.getName()
-	print "Date:",event.getDate()
-	print "Place:",event.getPlaceName()
-
-	</programlisting>
-      </figure>
-    </sect2>
-    <sect2 id="printfamily">
-      <title>Print the members of each family</title>
-      <para>
-      This example shows how to display the parents and children of
-      each family in the database. It assumes that the database is called
-      <function>db</function>.
-      </para>
-      <figure id="familyexample">
-        <title>Displaying Family Information</title>
-        <programlisting>
-
-for family in db.getFamilyMap().values:
-    print "-------------------"
-    print "Family ID:",family.getId()
-    father = family.getFather()
-    if father != None:
-        print "Father:",father.getPrimaryName().getName()
-    mother = family.getMother()
-    if mother != None:
-        print "Mother:",mother.getPrimaryName().getName()
-    for child in family.getChildList():
-        print "Child:",child.getPrimaryName().getName()
-
-	</programlisting>
-      </figure>
-    </sect2>
-    <sect2 id="personsfamily">
-      <title>Display the marriages/relationships of a person</title>
-      <para>
-      This example shows how to display the families and relationships
-      in which the person is considered a spouse or parent. It assumes
-      that the person is called <function>person</function>.
-      </para>
-      <para>
-      Relationships between people can be complex. Because someone is
-      male, does not necessarily mean that the person will be
-      considered the "Father" of a relationship. In relationships of
-      type "Partners", the "father" and "mother" of the relationship
-      should be of the same gender. So to determine the spouse of a
-      person, it is usually best to compare the person against what is
-      returned by <function>getFather</function> and
-      <function>getMother</function> to find the one that is not
-      equal.  It should also be noted that the
-      <function>getFather</function> and
-      <function>getMother</function> methods will return None if noone
-      has been associated with that role in the family.
-      </para>
-      <figure id="relexample">
-        <title>Displaying Relationship Information</title>
-        <programlisting>
-
-for family in person.getFamilyList():
-    print "-------------------"
-    print "Family ID:",family.getId()
-    print "Relationship Type:",family.getRelationship()
-    father = family.getFather()
-    if father != None and father != person:
-        print "Spouse:",father.getPrimaryName().getName()
-    mother = family.getMother()
-    if mother != None and mother != person:
-        print "Spouse:",mother.getPrimaryName().getName()
-
-	</programlisting>
-      </figure>
-    </sect2>
-  </sect1>
-
-<!-- ============= Authors ================================ -->
-
-  <sect1 id="authors">
-    <title>Authors</title>
-    <para>
-    <application>gramps</application> was written by Don Allingham
-    (<email>dallingham@users.sourceforge.net</email>). To find more
-    information about <application>gramps</application>, please visit
-    the <ulink url="http://gramps.sourceforge.net" type="http">gramps
-    web page</ulink>.
-    </para>
-    <para>
-    This manual was written by Don Allingham
-    (<email>dallingham@users.sourceforge.net</email>).
-    </para>
-
-<!-- For translations: uncomment this:
-    <para>
-    Latin translation was done by ME
-    (<email>MYNAME@MYADDRESS</email>). Please send all comments and
-    suggestions regarding this translation to SOMEWHERE.
-    </para>
--->
-  </sect1>
-
-<!-- ============= Application License ============================= -->
-
-  <sect1 id="license">
-    <title>License</title>
-    <para>
-    This program is free software; you can redistribute it and/or
-    modify it under the terms of the <ulink type="help"
-    url="gnome-help:gpl"> <citetitle>GNU General Public
-    License</citetitle></ulink> as published by the Free Software
-    Foundation; either version 2 of the License, or (at your option)
-    any later version.
-    </para>
-    <para>
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    <citetitle>GNU General Public License</citetitle> for more
-    details.
-    </para>
-    <para>
-    A copy of the <citetitle>GNU General Public License</citetitle> is
-    included as an appendix to the <citetitle>GNOME Users
-    Guide</citetitle>.  You may also obtain a copy of the
-    <citetitle>GNU General Public License</citetitle> from the Free
-    Software Foundation by visiting <ulink type="http"
-    url="http://www.fsf.org">their Web site</ulink> or by writing to
-    <address>
-    Free Software Foundation, Inc.  <street>59 Temple Place</street> -
-    Suite 330 <city>Boston</city>, <state>MA</state>
-    <postcode>02111-1307</postcode> <country>USA</country>
-    </address>
-    </para>
-  </sect1>
-</article>
-
-
-
-
-
-
-
-
-

gramps/doc/extending-gramps/Makefile.am

@@ -1,4 +0,0 @@
-# Process this file with automake to produce Makefile.in
-
-SUBDIRS = C
-

gramps/doc/extending-gramps/Makefile.in

@@ -1,355 +0,0 @@
-# Makefile.in generated by automake 1.6.2 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Process this file with automake to produce Makefile.in
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-AWK = @AWK@
-BINSH = @BINSH@
-CC = @CC@
-DEPDIR = @DEPDIR@
-DISABLE_SCROLLKEEPER = @DISABLE_SCROLLKEEPER@
-GNOMEHELP = @GNOMEHELP@
-HAVE_GNOME_CONFIG = @HAVE_GNOME_CONFIG@
-HAVE_JW = @HAVE_JW@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-JW = @JW@
-LANGUAGES = @LANGUAGES@
-LIBS = @LIBS@
-MOFILES = @MOFILES@
-MSGFMT = @MSGFMT@
-P15_INCLUDES = @P15_INCLUDES@
-P20_INCLUDES = @P20_INCLUDES@
-P21_INCLUDES = @P21_INCLUDES@
-P22_INCLUDES = @P22_INCLUDES@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-PYTHON = @PYTHON@
-PYTHON15 = @PYTHON15@
-PYTHON20 = @PYTHON20@
-PYTHON21 = @PYTHON21@
-PYTHON22 = @PYTHON22@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
-SCROLLKEEPER_REQUIRED = @SCROLLKEEPER_REQUIRED@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VERSIONSTRING = @VERSIONSTRING@
-ZIP = @ZIP@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-
-SUBDIRS = C
-subdir = doc/extending-gramps
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-	uninstall-info-recursive all-recursive install-data-recursive \
-	install-exec-recursive installdirs-recursive install-recursive \
-	uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = Makefile.am Makefile.in
-DIST_SUBDIRS = $(SUBDIRS)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/extending-gramps/Makefile
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$(top_distdir)" \
-	        distdir=../$(distdir)/$$subdir \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
-	clean-generic clean-recursive distclean distclean-generic \
-	distclean-recursive distclean-tags distdir dvi dvi-am \
-	dvi-recursive info info-am info-recursive install install-am \
-	install-data install-data-am install-data-recursive \
-	install-exec install-exec-am install-exec-recursive \
-	install-info install-info-am install-info-recursive install-man \
-	install-recursive install-strip installcheck installcheck-am \
-	installdirs installdirs-am installdirs-recursive \
-	maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-recursive tags tags-recursive uninstall \
-	uninstall-am uninstall-info-am uninstall-info-recursive \
-	uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

gramps/doc/gramps-manual/C/Makefile.am

@@ -1,53 +0,0 @@
-SGML_FILES = gramps-manual.sgml
-
-figs = \
-     figures/addmedia.png \
-     figures/druidpg1.png \
-     figures/editbookmarks.png \
-     figures/ep-address.png \
-     figures/ep-altname.png \
-     figures/ep-attributes.png \
-     figures/ep-event.png \
-     figures/ep-gallery.png \
-     figures/ep-general.png \
-     figures/ep-internet.png \
-     figures/ep-lds.png \
-     figures/ep-notes.png \
-     figures/familyview.png \
-     figures/filter.png \
-     figures/globalmedia.png \
-     figures/gotobookmark.png \
-     figures/localmedia.png \
-     figures/mainwin.png \
-     figures/mediaview.png \
-     figures/opendb.png \
-     figures/pedegreesel.png \
-     figures/pedegreeview.png \
-     figures/peoplelist.png \
-     figures/placelist.png \
-     figures/prefs-bars.png \
-     figures/prefs-colors.png \
-     figures/prefs-dates.png \
-     figures/prefs-disp.png \
-     figures/prefs-find.png \
-     figures/prefs-gen.png \
-     figures/prefs-guess.png \
-     figures/prefs-ids.png \
-     figures/prefs-main.png \
-     figures/prefs-media.png \
-     figures/prefs-report.png \
-     figures/prefs-research.png \
-     figures/prefs-revision.png \
-     figures/reportsel.png \
-     figures/revcontrol.png \
-     figures/savecomment.png \
-     figures/sourcelist.png \
-     figures/sourcerefsel.png \
-     figures/toolsel.png
-
-docname = gramps-manual
-lang = C
-omffile = gramps-manual-C.omf
-sgml_ents = 
-include $(top_srcdir)/doc/sgmldocs.make
-dist-hook: app-dist-hook

gramps/doc/gramps-manual/C/Makefile.in

@@ -1,464 +0,0 @@
-# Makefile.in generated by automake 1.6.2 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# To use this template:
-#     1) Define: figs, docname, lang, omffile, sgml_ents although figs, 
-#        omffile, and sgml_ents may be empty in your Makefile.am which 
-#        will "include" this one 
-#     2) Figures must go under figures/ and be in PNG format
-#     3) You should only have one document per directory 
-#
-#        Note that this makefile forces the directory name under
-#        $prefix/share/gnome/help/ to be the same as the SGML filename
-#        of the document.  This is required by GNOME. eg:
-#        $prefix/share/gnome/help/fish_applet/C/fish_applet.sgml
-#                                 ^^^^^^^^^^^   ^^^^^^^^^^^
-# Definitions:
-#   figs         A list of screenshots which will be included in EXTRA_DIST
-#                Note that these should reside in figures/ and should be .png
-#                files, or you will have to make modifications below.
-#   docname      This is the name of the SGML file: <docname>.sgml
-#   lang         This is the document locale
-#   omffile      This is the name of the OMF file.  Convention is to name
-#                it <docname>-<locale>.omf.
-#   sgml_ents    This is a list of SGML entities which must be installed 
-#                with the main SGML file and included in EXTRA_DIST. 
-# eg:
-#   figs = \
-#          figures/fig1.png            \
-#          figures/fig2.png
-#   docname = scrollkeeper-manual
-#   lang = C
-#   omffile=scrollkeeper-manual-C.omf
-#   sgml_ents = fdl.sgml
-#   include $(top_srcdir)/help/sgmldocs.make
-#   dist-hook: app-dist-hook
-#
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../../..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-AWK = @AWK@
-BINSH = @BINSH@
-CC = @CC@
-DEPDIR = @DEPDIR@
-DISABLE_SCROLLKEEPER = @DISABLE_SCROLLKEEPER@
-GNOMEHELP = @GNOMEHELP@
-HAVE_GNOME_CONFIG = @HAVE_GNOME_CONFIG@
-HAVE_JW = @HAVE_JW@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-JW = @JW@
-LANGUAGES = @LANGUAGES@
-LIBS = @LIBS@
-MOFILES = @MOFILES@
-MSGFMT = @MSGFMT@
-P15_INCLUDES = @P15_INCLUDES@
-P20_INCLUDES = @P20_INCLUDES@
-P21_INCLUDES = @P21_INCLUDES@
-P22_INCLUDES = @P22_INCLUDES@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-PYTHON = @PYTHON@
-PYTHON15 = @PYTHON15@
-PYTHON20 = @PYTHON20@
-PYTHON21 = @PYTHON21@
-PYTHON22 = @PYTHON22@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
-SCROLLKEEPER_REQUIRED = @SCROLLKEEPER_REQUIRED@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VERSIONSTRING = @VERSIONSTRING@
-ZIP = @ZIP@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-SGML_FILES = gramps-manual.sgml
-
-figs = \
-     figures/addmedia.png \
-     figures/druidpg1.png \
-     figures/editbookmarks.png \
-     figures/ep-address.png \
-     figures/ep-altname.png \
-     figures/ep-attributes.png \
-     figures/ep-event.png \
-     figures/ep-gallery.png \
-     figures/ep-general.png \
-     figures/ep-internet.png \
-     figures/ep-lds.png \
-     figures/ep-notes.png \
-     figures/familyview.png \
-     figures/filter.png \
-     figures/globalmedia.png \
-     figures/gotobookmark.png \
-     figures/localmedia.png \
-     figures/mainwin.png \
-     figures/mediaview.png \
-     figures/opendb.png \
-     figures/pedegreesel.png \
-     figures/pedegreeview.png \
-     figures/peoplelist.png \
-     figures/placelist.png \
-     figures/prefs-bars.png \
-     figures/prefs-colors.png \
-     figures/prefs-dates.png \
-     figures/prefs-disp.png \
-     figures/prefs-find.png \
-     figures/prefs-gen.png \
-     figures/prefs-guess.png \
-     figures/prefs-ids.png \
-     figures/prefs-main.png \
-     figures/prefs-media.png \
-     figures/prefs-report.png \
-     figures/prefs-research.png \
-     figures/prefs-revision.png \
-     figures/reportsel.png \
-     figures/revcontrol.png \
-     figures/savecomment.png \
-     figures/sourcelist.png \
-     figures/sourcerefsel.png \
-     figures/toolsel.png
-
-
-docname = gramps-manual
-lang = C
-omffile = gramps-manual-C.omf
-sgml_ents = 
-
-docdir = $(datadir)/gnome/help/$(docname)/$(lang)
-
-doc_DATA = index.html
-
-sgml_files = $(sgml_ents) $(docname).sgml
-
-omf_dir = $(top_srcdir)/omf-install
-
-EXTRA_DIST = $(sgml_files) $(doc_DATA) $(omffile) $(figs)
-
-CLEANFILES = omf_timestamp
-
-# when doing a distclean, we also want to clear out html files:
-CONFIG_CLEAN_FILES = index.html $(docname)/*.html $(docname)/stylesheet-images/*.gif
-subdir = doc/gramps-manual/C
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-DIST_SOURCES =
-DATA = $(doc_DATA)
-
-DIST_COMMON = Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  Makefile.am $(top_srcdir)/doc/sgmldocs.make $(top_srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/gramps-manual/C/Makefile
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-docDATA_INSTALL = $(INSTALL_DATA)
-install-docDATA: $(doc_DATA)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(docdir)
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(docDATA_INSTALL) $$d$$p $(DESTDIR)$(docdir)/$$f"; \
-	  $(docDATA_INSTALL) $$d$$p $(DESTDIR)$(docdir)/$$f; \
-	done
-
-uninstall-docDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " rm -f $(DESTDIR)$(docdir)/$$f"; \
-	  rm -f $(DESTDIR)$(docdir)/$$f; \
-	done
-tags: TAGS
-TAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
-	$(mkinstalldirs) $(distdir)/figures
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="${top_distdir}" distdir="$(distdir)" \
-	  dist-hook
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-
-installdirs:
-	$(mkinstalldirs) $(DESTDIR)$(docdir)
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-docDATA
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-docDATA uninstall-info-am uninstall-local
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am info info-am install \
-	install-am install-data install-data-am install-docDATA \
-	install-exec install-exec-am install-info install-info-am \
-	install-man install-strip installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic uninstall uninstall-am \
-	uninstall-docDATA uninstall-info-am uninstall-local
-
-
-all: index.html omf
-
-omf: omf_timestamp
-
-omf_timestamp: $(omffile)
-	-for file in $(omffile); do \
-	  scrollkeeper-preinstall $(docdir)/$(docname).sgml $$file $(omf_dir)/$$file; \
-	done
-	touch omf_timestamp
-
-index.html: $(docname)/index.html
-	-cp $(docname)/index.html .
-
-# The weird srcdir trick is because the db2html from the Cygnus RPMs
-# cannot handle relative filenames.
-# The t1 test is for certain versions of jw that create cryptic
-# html pages, o fwhich the index is called "t1".  Also, the jw
-# script from docbook-utils 0.6.9 does not copy the template 
-# stylesheet-images directory like the db2html script does, so 
-# we give it a little help (at least for now)
-
-$(docname)/index.html: $(docname).sgml
-	-srcdir=`cd $(srcdir) && pwd`;   \
-	if test "$(HAVE_JW)" = 'yes' ; then \
-	   if test -f /usr/share/sgml/docbook/dsssl-stylesheets/images/next.gif ; then \
-	        mkdir -p $$srcdir/$(docname)/stylesheet-images ; \
-	   	cp /usr/share/sgml/docbook/dsssl-stylesheets/images/*.gif $$srcdir/$(docname)/stylesheet-images/ ; \
-	   fi; \
-	   jw -c /etc/sgml/catalog $$srcdir/$(docname).sgml -o $$srcdir/$(docname); \
-	else \
-	   db2html $$srcdir/$(docname).sgml; \
-	fi
-	if test -f $(docname)/t1.html; then \
-	   cd $(srcdir)/$(docname) && cp t1.html index.html; \
-	   cd $(srcdir); \
-	fi
-
-$(docname).sgml: $(sgml_ents)
-	-ourdir=`cd . && pwd`;  \
-	cd $(srcdir);   \
-	cp $(sgml_ents) $$ourdir
-
-app-dist-hook: index.html
-	-$(mkinstalldirs) $(distdir)/$(docname)/stylesheet-images
-	-$(mkinstalldirs) $(distdir)/figures
-	-cp $(srcdir)/$(docname)/*.html $(distdir)/$(docname)
-	-for file in $(srcdir)/$(docname)/*.css; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  cp $$file $(distdir)/$(docname)/$$basefile ; \
-	done
-	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  cp $$file $(distdir)/$(docname)/stylesheet-images/$$basefile ; \
-	done
-	-if [ -e topic.dat ]; then \
-		cp $(srcdir)/topic.dat $(distdir); \
-	 fi
-
-install-data-am: index.html omf
-	-$(mkinstalldirs) $(DESTDIR)$(docdir)/stylesheet-images
-	-$(mkinstalldirs) $(DESTDIR)$(docdir)/figures
-	-cp $(srcdir)/$(sgml_files) $(DESTDIR)$(docdir)
-	-for file in $(srcdir)/$(docname)/*.html $(srcdir)/$(docname)/*.css; do \
-	  basefile=`echo $$file | sed -e 's,^.*/,,'`; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$$basefile; \
-	done
-	-for file in $(srcdir)/figures/*.png; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/figures/$$basefile; \
-	done
-	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/stylesheet-images/$$basefile; \
-	done
-	-if [ -e $(srcdir)/topic.dat ]; then \
-		$(INSTALL_DATA) $(srcdir)/topic.dat $(DESTDIR)$(docdir); \
-	 fi
-
-$(docname).ps: $(srcdir)/$(docname).sgml
-	-srcdir=`cd $(srcdir) && pwd`; \
-	db2ps $$srcdir/$(docname).sgml
-
-$(docname).rtf: $(srcdir)/$(docname).sgml
-	-srcdir=`cd $(srcdir) && pwd`; \
-	db2ps $$srcdir/$(docname).sgml
-
-uninstall-local:
-	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  rm -f $(docdir)/stylesheet-images/$$basefile; \
-	done
-	-for file in $(srcdir)/figures/*.png; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  rm -f $(docdir)/figures/$$basefile; \
-	done
-	-for file in $(srcdir)/$(docname)/*.html $(srcdir)/$(docname)/*.css; do \
-	  basefile=`echo $$file | sed -e 's,^.*/,,'`; \
-	  rm -f $(DESTDIR)$(docdir)/$$basefile; \
-	done
-	-for file in $(sgml_files); do \
-	  rm -f $(DESTDIR)$(docdir)/$$file; \
-	done
-	-rmdir $(DESTDIR)$(docdir)/stylesheet-images
-	-rmdir $(DESTDIR)$(docdir)/figures
-	-rmdir $(DESTDIR)$(docdir)
-dist-hook: app-dist-hook
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

gramps/doc/gramps-manual/C/gramps-manual-C.omf

@@ -1,17 +0,0 @@
-<?xml version="1.0" standalone="no"?>
-<omf>
-  <resource>
-    <creator>
-     Donald N. Allingham (dallingham@users.sourceforge.net)
-    </creator>
-    <title>
-      GRAMPS User Manual
-    </title>
-    <date>2002-07-23</date>
-    <subject category="GNOME|Applications"/>
-    <format mime="text/sgml"/>
-    <identifier url="gramps-manual.sgml"/>
-    <language code="C"/>
-    <relation seriesid="e2f714ac-bc34-11d6-8bae-8d06b0acc69c"/>
-  </resource>
-</omf>

gramps/doc/gramps-manual/Makefile.am

@@ -1,4 +0,0 @@
-# Process this file with automake to produce Makefile.in
-
-SUBDIRS = C
-

gramps/doc/gramps-manual/Makefile.in

@@ -1,355 +0,0 @@
-# Makefile.in generated by automake 1.6.2 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Process this file with automake to produce Makefile.in
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-AWK = @AWK@
-BINSH = @BINSH@
-CC = @CC@
-DEPDIR = @DEPDIR@
-DISABLE_SCROLLKEEPER = @DISABLE_SCROLLKEEPER@
-GNOMEHELP = @GNOMEHELP@
-HAVE_GNOME_CONFIG = @HAVE_GNOME_CONFIG@
-HAVE_JW = @HAVE_JW@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-JW = @JW@
-LANGUAGES = @LANGUAGES@
-LIBS = @LIBS@
-MOFILES = @MOFILES@
-MSGFMT = @MSGFMT@
-P15_INCLUDES = @P15_INCLUDES@
-P20_INCLUDES = @P20_INCLUDES@
-P21_INCLUDES = @P21_INCLUDES@
-P22_INCLUDES = @P22_INCLUDES@
-PACKAGE = @PACKAGE@
-POFILES = @POFILES@
-PYTHON = @PYTHON@
-PYTHON15 = @PYTHON15@
-PYTHON20 = @PYTHON20@
-PYTHON21 = @PYTHON21@
-PYTHON22 = @PYTHON22@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_VERSION = @PYTHON_VERSION@
-RELEASE = @RELEASE@
-SCROLLKEEPER_CONFIG = @SCROLLKEEPER_CONFIG@
-SCROLLKEEPER_REQUIRED = @SCROLLKEEPER_REQUIRED@
-STRIP = @STRIP@
-VERSION = @VERSION@
-VERSIONSTRING = @VERSIONSTRING@
-ZIP = @ZIP@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-
-SUBDIRS = C
-subdir = doc/gramps-manual
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
-	uninstall-info-recursive all-recursive install-data-recursive \
-	install-exec-recursive installdirs-recursive install-recursive \
-	uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = Makefile.am Makefile.in
-DIST_SUBDIRS = $(SUBDIRS)
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/gramps-manual/Makefile
-Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
-	@list='$(DISTFILES)'; for file in $$list; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$(top_distdir)" \
-	        distdir=../$(distdir)/$$subdir \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
-	clean-generic clean-recursive distclean distclean-generic \
-	distclean-recursive distclean-tags distdir dvi dvi-am \
-	dvi-recursive info info-am info-recursive install install-am \
-	install-data install-data-am install-data-recursive \
-	install-exec install-exec-am install-exec-recursive \
-	install-info install-info-am install-info-recursive install-man \
-	install-recursive install-strip installcheck installcheck-am \
-	installdirs installdirs-am installdirs-recursive \
-	maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-recursive tags tags-recursive uninstall \
-	uninstall-am uninstall-info-am uninstall-info-recursive \
-	uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

gramps/doc/gramps.1

@@ -1,49 +0,0 @@
-.TH gramps 1 "0.8.1" "man page by Brandon L. Griffith" ""
-.SH "NAME"
-.LP 
-gramps \- Genealogical Research and Analysis Management Programming System
-.SH "SYNTAX"
-.LP 
-gramps [\fIDatabase\fP]
-.br 
-Currently \fBgramps\fR does not require any command line arguments.
-However, if provided, it is the path to either a gramps database or a GEDCOM
-file to be imported.
-.SH "DESCRIPTION"
-.LP 
-Gramps is an open source genealogy program. It is written in Python, using the GTK/GNOME interface.
-.br 
-Gramps should seem familiar to anyone who has used other geneology programs before such as \fIFamily Tree Maker for Windows(TM)\fR or the GNU Geneweb.
-.br 
-It supports importing of the ever popular GEDCOM format which is used world wide by almost all other geneology software.
-.SH "Concepts"
-Supports a python\-based plugin system, allowing import and export writers, report generators, tools, and display filters to be added without modification of the main program.
-.LP 
-Data is stored in an gzip'ed XML format
-.LP 
-Instead of generating direct printer output, report generators target other systems, such as \fIOpen Office\fR, \fIAbiWord\fR, HTML or LaTeX to allow the user to modify the format to suit his or her needs. 
-.SH "FILES"
-.LP 
-\fI${PREFIX}/bin/gramps\fP 
-.br 
-\fI${PREFIX}/share/gramps\fP
-.br 
-\fI${HOME}/.gramps\fP 
-.SH "Authors"
-Donald Allingham \fI<donaldallingham@home.com>\fR
-.br 
-\fIhttp://gramps.sourceforge.net\fR
-.LP 
-This manpage was written by:
-.br 
-Brandon L. Griffith \fI<brandon@debian.org>\fR
-.br 
-Any ammendants or errors should be reported to him.
-.br 
-It was originally written for inclusion in the Debian GNU/Linux system.
-.SH "DOCUMENTATION"
-See also the file \fBgramps.sgml\fR
-.br 
-On a Debian system this can be found in \fI/usr/doc/gramps\fR
-.br 
-Or in the doc directory of the official source distribution.

gramps/doc/gramps.1.in

@@ -1,49 +0,0 @@
-.TH gramps 1 "@VERSION@" "man page by Brandon L. Griffith" ""
-.SH "NAME"
-.LP 
-gramps \- Genealogical Research and Analysis Management Programming System
-.SH "SYNTAX"
-.LP 
-gramps [\fIDatabase\fP]
-.br 
-Currently \fBgramps\fR does not require any command line arguments.
-However, if provided, it is the path to either a gramps database or a GEDCOM
-file to be imported.
-.SH "DESCRIPTION"
-.LP 
-Gramps is an open source genealogy program. It is written in Python, using the GTK/GNOME interface.
-.br 
-Gramps should seem familiar to anyone who has used other geneology programs before such as \fIFamily Tree Maker for Windows(TM)\fR or the GNU Geneweb.
-.br 
-It supports importing of the ever popular GEDCOM format which is used world wide by almost all other geneology software.
-.SH "Concepts"
-Supports a python\-based plugin system, allowing import and export writers, report generators, tools, and display filters to be added without modification of the main program.
-.LP 
-Data is stored in an gzip'ed XML format
-.LP 
-Instead of generating direct printer output, report generators target other systems, such as \fIOpen Office\fR, \fIAbiWord\fR, HTML or LaTeX to allow the user to modify the format to suit his or her needs. 
-.SH "FILES"
-.LP 
-\fI${PREFIX}/bin/gramps\fP 
-.br 
-\fI${PREFIX}/share/gramps\fP
-.br 
-\fI${HOME}/.gramps\fP 
-.SH "Authors"
-Donald Allingham \fI<donaldallingham@home.com>\fR
-.br 
-\fIhttp://gramps.sourceforge.net\fR
-.LP 
-This manpage was written by:
-.br 
-Brandon L. Griffith \fI<brandon@debian.org>\fR
-.br 
-Any ammendants or errors should be reported to him.
-.br 
-It was originally written for inclusion in the Debian GNU/Linux system.
-.SH "DOCUMENTATION"
-See also the file \fBgramps.sgml\fR
-.br 
-On a Debian system this can be found in \fI/usr/doc/gramps\fR
-.br 
-Or in the doc directory of the official source distribution.

gramps/doc/gramps.dtd

@@ -1,320 +0,0 @@
-<!--?xml version="1.0" encoding="UTF-8"?-->
-
-<!-- A Document Type Definition for genealogy data (as produced by Gramps)
-
-Copyright (c) 2001 Graham J. Williams
-
-Time-stamp: <2002/01/22 15:41:37 Graham.Williams@csiro.au>
-
-Freely Redistributable under the terms of the GNU General Public License.
-
-Based on GEDCOM and conforming to the Gramps XML encoding.
-Still under development and Gramps XML not complete.
-
-Information on Gramps is available from http://
-
--->
-
-<!--
-
-DATABASE
-
-	Defines an XML document which is a <database> consisting of a
-
-	header	   Information about the "owner" of the database
-	people
-	families
-	sources
-	places
-	objects
-	bookmarks
-
--->
-
-<!ELEMENT database (header, people?, families?, sources?, places?, objects?, 
-                    bookmarks?)>
-
-<!--	************************************************************
-
-HEADER
-
-	A <header> consists of <created> (information about this
-	genealogical database) and <researcher> (information about the
-	person who created this genealogical database)
-
--->
-
-<!ELEMENT header (created, researcher?)>
-
-<!ELEMENT created EMPTY>
-<!ATTLIST created
-  date     CDATA #REQUIRED
-  version  CDATA #REQUIRED
-  people   CDATA #REQUIRED
-  families CDATA #REQUIRED>
-
-<!ELEMENT researcher (resname, resaddr?, rescity?, resstate?,
-                      rescountry?, respostal?, resphone?, resemail?)>
-<!ELEMENT resname    (#PCDATA)>
-<!ELEMENT resaddr    (#PCDATA)>
-<!ELEMENT rescity    (#PCDATA)>
-<!ELEMENT resstate   (#PCDATA)>
-<!ELEMENT rescountry (#PCDATA)>
-<!ELEMENT respostal  (#PCDATA)>
-<!ELEMENT resphone   (#PCDATA)>
-<!ELEMENT resemail   (#PCDATA)>
-
-<!--	************************************************************
-
-PEOPLE
-
-	The UID is a place holder for PAF UID's that are imported. PAF
-	generates a unique ID for each person which is useful for
-	merges. It is not used by Gramps otherwise.
-
--->
-
-<!ELEMENT people (person)*>
-<!ATTLIST people default CDATA #IMPLIED>
-
-<!--
-
-PERSON
-
-	gender	Either M or F.
-	name	
-	aka	Also known as. Alternative names from marriage,
-		adoption, legal name change, etc
-
-	nick	The nick name - a name the person is sometimes known by.
-
--->
-
-<!ELEMENT person (gender, name?, aka*, nick?, pos?, uid?, event*,
-                  objref*, url*, childof*, address*, parentin*,
-                  sourceref?, attribute*, note?)>
-<!ATTLIST person id ID #REQUIRED>
-
-<!--
-
-GENDER has values of M or F.
-
--->
-
-<!ELEMENT gender  (#PCDATA)>
-
-<!-- 
-
-NAME and AKA
-
-	first	Given names
-	last	Surname
-	suffix
-	title	E.g., Sargent Major
-
--->
-
-<!ELEMENT name    (first?, last?,suffix?,title?)>
-<!ATTLIST name    conf CDATA #IMPLIED
-                  priv CDATA #IMPLIED>
-
-<!ELEMENT aka     (first?, last?,suffix?,note?)>
-<!ATTLIST aka     conf CDATA #IMPLIED
-                  priv CDATA #IMPLIED>
-
-<!ELEMENT first   (#PCDATA)>
-<!ELEMENT last    (#PCDATA)>
-<!ELEMENT suffix  (#PCDATA)>
-<!ELEMENT title   (#PCDATA)>
-
-<!ELEMENT nick    (#PCDATA)>
-<!ELEMENT uid     (#PCDATA)>
-
-<!ELEMENT pos EMPTY>
-<!ATTLIST pos x CDATA #REQUIRED
-              y CDATA #REQUIRED>
-
-<!ELEMENT childof EMPTY>
-<!ATTLIST childof
-  ref   IDREF  #REQUIRED
-  mrel  (Birth|Adopted|Stepchild|Other|Unknown) #IMPLIED
-  frel  (Birth|Adopted|Stepchild|Other|Unknown) #IMPLIED>
-
-<!ELEMENT parentin EMPTY>
-<!ATTLIST parentin
-  ref    IDREF #REQUIRED>
-
-<!ELEMENT address (dateval?,street?,city?,state?,country?,postal?,
-                   note?,sourceref?)>
-<!ATTLIST address conf CDATA #IMPLIED
-                  priv CDATA #IMPLIED>
-
-<!ELEMENT street  (#PCDATA)>
-<!ELEMENT city    (#PCDATA)>
-<!ELEMENT country (#PCDATA)>
-<!ELEMENT postal  (#PCDATA)>
-<!ELEMENT state   (#PCDATA)>
-
-<!--	************************************************************
-
-FAMILY
-
-	An element to record information about a family.
-
--->
-
-<!ELEMENT families (family)*>
-
-<!ELEMENT family (father?,mother?,event*,objref*,child*,attribute*,note?)>
-<!ATTLIST family
-  id        ID    #REQUIRED
-  type      (Married|Unmarried|Partners|Other|Unkown) #IMPLIED>
-
-<!ELEMENT father EMPTY>
-<!ATTLIST father ref IDREF #REQUIRED>
-
-<!ELEMENT mother EMPTY>
-<!ATTLIST mother ref IDREF #REQUIRED>
-
-<!ELEMENT child EMPTY>
-<!ATTLIST child ref IDREF #REQUIRED>
-
-<!--	************************************************************
-
-SOURCES
-
--->
-
-<!ELEMENT sources (source)*>
-<!ELEMENT source (sauthor?,spubinfo?,scallno?)>
-<!ATTLIST source id ID #REQUIRED>
-<!ELEMENT sauthor  (#PCDATA)>
-<!ELEMENT spubinfo (#PCDATA)>
-<!ELEMENT scallno  (#PCDATA)>
-
-<!--	************************************************************
-
-PLACES
-
--->
-
-<!ELEMENT places (placeobj)*>
-
-<!ELEMENT placeobj (coord?,location*,objref*,url*,note?)>
-<!ATTLIST placeobj id ID #REQUIRED title CDATA #IMPLIED>
-
-<!ELEMENT coord EMPTY>
-<!ATTLIST coord long CDATA #REQUIRED lat CDATA #REQUIRED>
-
-<!ELEMENT location EMPTY>
-<!ATTLIST location
-    city        CDATA #IMPLIED
-    county      CDATA #IMPLIED
-    state       CDATA #IMPLIED
-    country     CDATA #IMPLIED
-    parish      CDATA #IMPLIED
->
-
-
-<!ELEMENT objects (object)*>
-
-<!ELEMENT object (attribute)*>
-<!ATTLIST object
-    id 		ID 	#REQUIRED
-    src		CDATA	#IMPLIED
-    mime	CDATA	#IMPLIED
-    description	CDATA	#IMPLIED>
-
-
-
-<!--	************************************************************
-
-BOOKMARKS
-
--->
-
-<!ELEMENT bookmarks (bookmark)*>
-<!ELEMENT bookmark EMPTY>
-<!ATTLIST bookmark ref IDREF #REQUIRED>
-
-<!--	************************************************************
-
-SHARED ELEMENTS
-
--->
-
-<!ELEMENT attribute  (note?,sourceref?)>
-<!ATTLIST attribute  conf 	CDATA 	#IMPLIED
-                     priv 	CDATA 	#IMPLIED
-                     type	CDATA	#IMPLIED
-                     value	CDATA	#IMPLIED
->
-
-<!--ELEMENT attr_type  (#PCDATA)>
-<!ELEMENT attr_value (#PCDATA)-->
-
-
-<!--
-
-EVENT
-
-  We can enumerate all possibilities for an event and then this will
-  not conform to Gramps as Gramps allows any type of events (i.e., a
-  user can define their own type of event) . By allowing anything
-  (CDATA) we no longer have automatic checking and in emacs no more
-  automatic selection of event types.
-
-  So decide to use the enumerated list for now unless there is a storm
-  of protest.
-
-	Alternative Birth	Another possible birth date
-	Degree			Awarding of a degree
-	Education		Some step in the education process
-	Graduation		Graduation (often same as degree)
-
--->
-
-<!ELEMENT event (dateval?,place?,description?,sourceref?,note?)>
-<!ATTLIST event type
-   (Annulment|Birth|Death|Christening|Baptism|Engagement|Marriage|
-   Occupation|Education|Degree|Immi|Burial|Cremation)
-   #REQUIRED>
-
-<!ELEMENT dateval EMPTY>
-<!ATTLIST dateval
-    val  CDATA #REQUIRED
-    type CDATA #IMPLIED>
-
-<!--ELEMENT date        (#PCDATA) replaced by dateval-->
-<!ELEMENT description (#PCDATA)>
-
-<!ELEMENT note (#PCDATA)>
-
-<!ELEMENT url EMPTY>
-<!ATTLIST url href CDATA #REQUIRED
-              conf CDATA #IMPLIED
-              priv (0|1) #IMPLIED
-              description CDATA #IMPLIED>
-
-<!ELEMENT place EMPTY>
-<!ATTLIST place ref IDREF #REQUIRED>
-
-<!ELEMENT sourceref (spage?,scomments?,stext?,sdate?)>
-<!ATTLIST sourceref ref IDREF #REQUIRED>
-
-<!ELEMENT spage     (#PCDATA)>
-<!ELEMENT scomments (#PCDATA)>
-<!ELEMENT sdate     (#PCDATA)>
-<!ELEMENT stext     (#PCDATA)>
-
-<!ELEMENT objref (attribute)*>
-<!ATTLIST objref
-    ref		IDREF	#REQUIRED
->
-
-<!ELEMENT img EMPTY>
-<!ATTLIST img
-  src     CDATA #REQUIRED
-  description CDATA #IMPLIED
-  display CDATA #IMPLIED>
-

gramps/doc/gramps.sgml

@@ -1,793 +0,0 @@
-<!DOCTYPE article PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN"[
-<!ENTITY version "0.2.0"> <!-- replace with application version -->
-]>
-
-
-<!-- 
-  This is a GNOME documentation template, designed by the GNOME
-  Documentation Project Team. Please use it for writing GNOME
-  documentation, making obvious changes. In particular, all the words
-  written in UPPERCASE (with the exception of GNOME) should be
-  replaced. As for "legalnotice", please leave the reference
-  unchanged.
-
-  Remember that this is a guide, rather than a perfect model to follow
-  slavishly. Make your manual logical and readable.  And don't forget
-  to remove these comments in your final documentation!  ;-)
--->
-
-<!-- 
-      (Do not remove this comment block.)
-  Maintained by the GNOME Documentation Project
-  http://developer.gnome.org/projects/gdp
-  Template version: 1.0.3
-  Template last modified: Nov 16, 2000
--->
-
-
-<!-- =============Document Header ============================= -->
-
-<article id="index"> <!-- please do not change the id -->
-
-  <artheader>
-    <title>gramps User Manual</title>
-    <copyright>
-      <year>2001</year>
-      <holder>Donald N. Allingham</holder>
-    </copyright>
-
-  <!-- translators: uncomment this:
-
-  <copyright>
-   <year>2001</year>
-   <holder>ME-THE-TRANSLATOR (Latin translation)</holder>
-  </copyright>
-
-   -->
-
-  <!-- do not put authorname in the header except in copyright - use
-  section "authors" below -->
-
-  <!-- Use this legal notice for online documents which depend on -->
-  <!-- core GNOME packages.                                       -->
-  <legalnotice id="legalnotice">
-   <para>
-    Permission is granted to copy, distribute and/or modify this document
-    under the terms of the <ulink type="help" 
-    url="gnome-help:fdl"><citetitle>GNU Free Documentation
-    License</citetitle></ulink>, Version 1.1 or any later version 
-    published by the Free Software Foundation with no Invariant Sections, 
-    no Front-Cover Texts, and no Back-Cover Texts.  A copy of the license
-    can be found <ulink type="help" url="gnome-help:fdl">here</ulink>.
-   </para>
-   <para>
-    Many of the names used by companies to distinguish their products and
-    services are claimed as trademarks. Where those names appear in any
-    GNOME documentation, and those trademarks are made aware to the members
-    of the GNOME Documentation Project, the names have been printed in caps
-    or initial caps.
-   </para>
-  </legalnotice>
-
-  <!-- Use this legal notice for documents which are placed on  -->
-  <!-- the web, shipped in any way other than online documents  -->
-  <!-- (eg. PS, PDF, or RTF), or which do not depend on the     -->
-  <!-- core GNOME distribution.                                 -->
-  <!--                                                          -->
-  <!-- If you use this version, you must place the following    -->
-  <!-- line in the document declaration at the top of your      -->
-  <!-- document:                                                -->
-  <!--   <!ENTITY FDL SYSTEM "fdl.sgml">                        -->
-  <!-- and the following line at the bottom of your document    -->
-  <!-- after the last </sect1>.                                 -->
-  <!--   &FDL;                                                  -->
-  <!--
-  <legalnotice id="legalnotice">
-   <para>
-    Permission is granted to copy, distribute and/or modify this document
-    under the terms of the <link linkend="fdl"><citetitle>GNU
-    Free Documentation License</citetitle></link>, Version 1.1 or any later
-    version published by the Free Software Foundation with no Invariant
-    Sections, no Front-Cover Texts, and no Back-Cover Texts.  A copy of the
-    license can be found in <xref linkend="fdl">.
-   </para>
-   <para>
-    Many of the names used by companies to distinguish their products and
-    services are claimed as trademarks. Where those names appear in any
-    GNOME documentation, and those trademarks are made aware to the members
-    of the GNOME Documentation Project, the names have been printed in caps
-    or initial caps.
-   </para>
-  </legalnotice>
-  -->
-
-  <!-- This is the manual version, not application version. --> 
-    <releaseinfo>
-       This is version 1.0 of the gramps manual.
-    </releaseinfo>
-
-  </artheader>
-
- <!-- ============= Document Body ============================= -->
-
- <!-- ============= Introduction ============================== -->
-  <sect1 id="intro">
-    <title>Introduction</title>
-
-    <para>
-    gramps is an acronym for the Genealogical Research and Analysis
-    Management Programming System.  It was conceived under the concept
-    that most genealogy programs were designed to provide the
-    researcher the capability to input information related to a
-    particular family tree.  Most of these programs have allowed for
-    the arranging and storing of information consistent with the
-    GEDCOM standards.  They usually provide a means for displaying
-    descendant or ancestral relationships by means of graphical
-    displays, charts, or reports.  These may be augmented with
-    pictures or other media to enhance the data.  Most provide for
-    inputting data on unconnected individuals/families that may or may
-    not have a relationship to the primary surname being researched.
-    Various other enhancements may also be provided in the
-    genealogical program that allows for different degrees of
-    importing and exporting data from other programs and printing of
-    the data contained in the various reports.  gramps, on the other
-    hand, attempts to provide all of the common capabilities of these
-    programs, but, more importantly, to provide a capability not
-    common to these programs.  This is the ability to input any bits
-    and pieces of information directly into gramps and
-    rearrange/manipulate any/all data events in the entire data base
-    (in any order or sequence) to assist the user in doing research,
-    analysis and correlation with the potential of filling
-    relationship gaps.  In short, a tool that provides a way to input
-    all your research into one place and do your analysis and
-    correlation using the speed, power, and accuracy of your computer
-    instead of pencils and unmanageable reams of paper.
-    </para>
-    <para>
-      To run <application>gramps</application>, select
-      <menuchoice>
-	<guisubmenu>Programs</guisubmenu>
-	<guisubmenu>Applications</guisubmenu>
-	<guimenuitem>gramps</guimenuitem>
-      </menuchoice>
-      from the <guimenu>Main Menu</guimenu>, or type
-      <command>gramps</command> on the command line.
-    </para>
-    <para>
-      <application>gramps</application> is included in the
-      <filename>gramps</filename> package, which is part of the
-      GNOME desktop environment. This document describes version
-      &version; of <application>gramps</application>.
-    </para>
-  </sect1>
-
- <!-- ================ Usage ================================ -->
- <!-- This section should describe basic usage of the application. -->
-
-  <sect1 id="usage">
-    <title>Using gramps</title>
-    <para>
-      <application>gramps</application> is a genealogy program.
-      This section describes basic usage of
-      <application>gramps</application>.
-    </para>
-  </sect1>
-
-  <sect1 id="firsttime">
-    <title>Running gramps for the first time.</title>
-    <para>
-      This section should discuss the start up druid.
-    </para>
-  </sect1>
-
-  <sect1 id="mainwindow">
-    <title>Main Window</title>
-    <para>
-      Starting <application>gramps</application> opens the
-      <interface>Main window</interface>, shown in <xref
-      linkend="mainwindow-fig">. The window is at first empty.
-
-      <!-- ==== Figure ==== -->
-      <figure id="mainwindow-fig">
-        <title>gramps Main Window</title>
-	<screenshot>
-	  <screeninfo>gramps Main Window</screeninfo>
-	  <graphic fileref="mainwin" format="PNG" srccredit="Don Allingham">
-          </graphic>
-	</screenshot>
-      </figure>
-    <!-- ==== End of Figure ==== -->
-    </para>
-  </sect1>
-
- <!-- ========= Basic Usage =========================== -->
-  <sect1 id="personlist">
-    <title>Person List</title>
-    <para>
-    The Person List window is the initial view seen on the main
-    window.  It displays the name, gender, birth date, and death
-    date of all individuals in the database.  At any time, you can
-    return to the this view either by pressing the People button at
-    the top of the screen, or by choosing the
-    <menuchoice>
-    <guisubmenu>View</guisubmenu>
-    <guimenuitem>Person List</guimenuitem> 
-    </menuchoice>
-    entry from the menus.
-    </para> 
-    <sect2>
-    <title>Selecting and Editing Individuals</title>
-    <para>
-    The Person List view lists the individuals in the database. A
-    individual can be selected as the active person by clicking on
-    an entry in the list. Once a person has been selected as the active 
-    person, the person's name appears in the status bar in the lower
-    left hand corner of the window.
-    </para>
-    <para>
-    Once the active person has been selected, pressing the Edit
-    Person button will display the Edit Person dialog allowing you
-    to edit the individual's personal information.  If the Edit
-    Person button is pressed without an active person being set, a
-    blank Edit Person dialog is presented, allowing you to enter a
-    new person.  Double-clicking on a entry will set the active
-    person and bring up the individual in the Edit Person dialog.
-    </para>
-    <para>
-    Pressing the Add Person button will display a blank Edit Person
-    dialog, allowing you to add a new person to the database.
-    </para>
-    <para>
-    If the Delete Person button is pressed, the active person and
-    all of the personal information related to the active person are
-    removed from the database.
-    </para>
-    </sect2>
-    <sect2>
-     <title>Applying Filters</title>
-    <para>
-    <application>gramps</application> allows you to apply filters to
-    the Person List. When a filter is applied, the Person List will
-    only display the entries matching the filter. All of the entries
-    remain in the database, but are temporarily hidden.
-    </para>
-    <para>
-    There are three parts to a filter. The first part is the
-    selection of the filter to be applied. A filter is selected from
-    the option menu directly above the Person List.  The second part
-    is an option qualifier. This qualifier provides more specific
-    information for the filter. Many filters do not require the
-    qualifier, and it will be grayed out if not needed.  The third
-    part of the filter is the invert selection.  When this option is
-    selected, <application>gramps</application> will display the
-    entries that do not match the filter.
-    </para>
-    <para>
-    A filter is not applied until the Apply button is pressed.  The
-    filter will remain in effect until the next time the Apply
-    button is pressed.
-    </para>
-    </sect2>
-    <sect2>
-     <title>Sorting</title>
-    <para>
-    Four columns are shown in the Person List display. The entries in
-    the list can be sorted by three of the field: Name, Birth Date, or 
-    Death Date.  Clicking on the column label will cause the list to 
-    be resorted by that column.  Arrows on the label indicate whether
-    the list is sort by ascending or descending order. 
-    </para>
-    <para>
-    If the list is already sorted by a particular column, clicking on
-    the same column label will switch sorting order.  For example, if
-    the list is currently sorted in ascending order by Name, clicking
-    on the Name column header will resort the list in descending order.
-    </para>
-    </sect2>
-
-  </sect1>
-
-  <sect1 id="familyview">
-    <title>Family View</title>
-    <para>
-    The Family View window displays the spouses, parents, and children
-    of the active person. At any time, you can return to the this view
-    either by pressing the Family button at the top of the screen, or
-    by choosing the
-    <menuchoice>
-    <guisubmenu>View</guisubmenu>
-    <guimenuitem>Family View</guimenuitem> 
-    </menuchoice>
-    entry from the menus.
-    </para> 
-    <para> 
-    This section should describe the family view.
-    </para>
-  </sect1>
-
-  <sect1 id="pedegreeview">
-    <title>Pedegree View</title>
-    <para>
-    The Pedegree View window displays the active person, the active
-    person's parents, and the active parent's grandparents in a somewhat
-    graphical manner. At any time, you can return to the this view
-    either by pressing the Pedegree button at the top of the screen, or
-    by choosing the
-    <menuchoice>
-    <guisubmenu>View</guisubmenu>
-    <guimenuitem>Pedgree</guimenuitem> 
-    </menuchoice>
-    entry from the menus.
-    </para>
-    <para>
-    This section should describe the pedegree view.
-    </para>
-  </sect1>
-
-  <sect1 id="sourcelist">
-    <title>Source List</title>
-    <para>
-    The Source List window displays the different sources which have been
-    entered into the database. At any time, you can return to the this view
-    either by pressing the Sources button at the top of the screen, or
-    by choosing the
-    <menuchoice>
-    <guisubmenu>View</guisubmenu>
-    <guimenuitem>Sources</guimenuitem> 
-    </menuchoice>
-    entry from the menus.
-    </para>
-    <para>
-    This section should describe the source list.
-    </para>
-  </sect1>
-
- <!-- ============= Customization ============================= -->
-
- <sect1 id="prefs">
-  <title>Customization</title>
-  <para>
-   To change the application settings, select
-   <menuchoice>
-    <guimenu>Settings</guimenu>
-    <guimenuitem>Preferences...</guimenuitem>
-   </menuchoice>.  This opens the
-   <interface>Preferences</interface> dialog, shown in <xref
-   linkend="preferences-fig">.
-  </para>
-
-  <figure id="preferences-fig">
-   <title>Preferences Dialog</title>
-   <screenshot>
-    <screeninfo>Preferences Dialog</screeninfo>
-    <graphic fileref="preferences" format="png" srccredit="Don Allingham">
-    </graphic>
-   </screenshot>
-  </figure>
-
-  <para>
-  </para>
-
- </sect1>
-
- <!-- ============= Generating Reports ============================= -->
-
- <sect1 id="genreports">
-  <title>Generating Reports</title>
-  <para>
-  <application>gramps</application> can produce a wide variety of 
-  reports. New report generators can be written by the user without
-  modifying the main program. For this reason, there may be more 
-  reports available than are documented by this manual
-  </para>
-  <para>
-  Unlike many genealogy programs, <application>gramps</application>
-  does not directly print reports. Instead,
-  <application>gramps</application> produces reports in formats that
-  are understood by other programs.  These formats include OpenOffice,
-  AbiWord, PDF, and HTML, among others. This allows the generated
-  reports to be modified after they are generated, stored for use
-  later, or emailed to another person.
-  </para>
-  <sect2 id="htmltemplates">
-  <title>Using HTML templates</title>
-  <para>
-  Many programs exist to convert GEDCOM files into HTML files that
-  can be viewed in a web browser. Most of these programs generate
-  HTML files according to their own predefined style. Since most
-  people have a style that they prefer, they are left with the option
-  of modifying hundreds of files by hand.
-  </para>
-  <para>
-  To solve this problem, <application>gramps</application> allows the
-  user to specify a template to be used for generating HTML files.  At
-  the time the report is generated, if HTML is selected as the target
-  format, the user can select an HTML template to be used.  Since the
-  template is chosen at report generation time, a different template
-  may be chosen each time, allowing the user to change the appearence
-  of the generated files at any time.  Nearly any existing HTML file
-  can be used as an HTML template for
-  <application>gramps</application>.
-  </para>
-  <para>
-  When a file has been established as the HTML template file,
-  <application>gramps</application> uses the template for each file
-  that it generates. <application>gramps</application> starts each
-  file by copying data from the template until it reaches an HTML
-  comment uses as a marker.  At that point,
-  <application>gramps</application> inserts its data into the output
-  file. <application>gramps</application> the continues reading the
-  until it reaches a second comment that tells it to resume copying
-  from the template.
-  </para>
-  <para>
-  <application>gramps</application> uses the string <function>&lt;!--
-  START --&gt;</function> to indicate where it should start inserting
-  its information, and the string <function>&lt;!-- STOP
-  --&gt;</function> to indicate where it should resume copying data
-  from the template.  The effect is that
-  <application>gramps</application> will create a new document,
-  replacing everything between the <function>&lt;!-- START
-  --&gt;</function> and <function>&lt;!-- STOP --&gt;</function> comments
-  with the report information.
-  </para>
-  <para>
-  The comment markers should be at the beginning of a line in the HTML
-  template file.  Adding the comments to an existing HTML document will
-  not affect the original HTML document in any way.
-  </para>
-  <para>
-  If no HTML template is specified, or if the specified template
-  cannot be read, <application>gramps</application> will use a
-  default, predefined template.
-  </para>
-  <para>
-    <figure id="templateexample">
-    <title>Sample HTML Template Example</title>
-    <programlisting>
-&lt;HTML&gt;
-&lt;HEAD&gt;
-&lt;TITLE&gt;
-This is my Title
-&lt;/TITLE&gt;
-&lt;/HEAD&gt;
-&lt;BODY BGCOLOR="#FFFFFF"&gt;
-&lt;P&gt;
-This is a simple template.  This text will appear in the html output.
-&lt;/P&gt;
-&lt;!-- START --&gt;
-&lt;P&gt;
-This is where gramps will place its report information. Any 
-information between the two comments, including this paragraph,
-will not appear in the gramps generated output.
-&lt;/P&gt;
-&lt;!-- STOP --&gt;
-&lt;P&gt;
-This text, since it appears after the stop comment, will also
-appear in every gramps generated file.
-&lt;/P&gt;
-&lt;/BODY&gt;
-&lt;/HTML&gt;
-    </programlisting>
-    </figure>
-  </para>
-  </sect2>
-
- </sect1>
-
- <!-- ============= Writing Filters ============================= -->
-
- <sect1 id="writingfilters">
-  <title>Writing Filters</title>
-  <para>
-   Users can create their own filters and add them to
-   <application>gramps</application>.  By adding the filter to the
-   user's private filter directory 
-   (<filename class="directory">~/.gramps/filters</filename>), 
-   the filter will be automatically
-   recognized the next time that the program is started.
-   </para>
-   <sect2 id="createfilter">
-    <title>Creating a filter</title>
-    <para>
-     Filters are written in the <application>python</application>
-     language.  Each filter is initialized with the qualifier string.
-     The qualifier string passes an additional text string to the
-     filter. This string can be used to further qualify the filter.
-     For example, if the filter is used to match names, the qualifier
-     would be used to provide the name that is being compared against.
-    </para>
-    <para>
-    Each filter is a python class, and should be in its own separate
-    module (file). The module should consist of the filter class
-    definition, and three functions &mdash;
-    <function>create</function>, <function>need_qualifier</function>,
-    and <function>get_name</function>.
-    </para>
-    <para>
-    The <function>create</function> function takes a string as its
-    only argument, returns a instance of the filter class. The string
-    argument is the qualifier string used to provide more specific
-    information.
-    </para>
-    <para>
-    The <function>need_qualifier</function> function takes no
-    arguments, and returns either a 0 or 1 to indicate if a qualifier
-    string is needed by the filter. Regardless of what
-    <function>need_qualifier</function> indicates, a text string is
-    always passed to the filter and the <function>create</function>
-    function.  The value returned by
-    <function>need_qualifier</function> indicates to the program
-    whether or not the qualifier field in the display should be
-    enabled or disabled.
-    </para>
-    <para>
-    The <function>get_name</function> function is used to provide a
-    description for the filter. This description is entered into
-    filter selection menus. If the filter is intended to be used by
-    others, it should be prepared for internationalization.  This is
-    accomplished by importing the <function>intl</function> module,
-    add defining <function>_</function> to be
-    <function>intl.gettext</function>.  The string returned by
-    <function>get_name</function> should be passed through the
-    <function>_</function> function to allow for conversion to the
-    target langauge.
-    </para>
-    <para>
-    All filters must be derived from the
-    <function>Filter.Filter</function> class. The
-    <function>__init__</function> task may be overridden, but if so,
-    should call the <function>__init__</function> function on the
-    <function>Filter.Filter</function> class.  The parent class
-    provides the variable <function>self.text</function>, which
-    contains the text string passed as the qualifier.
-    </para>
-    <para>
-    All filter classes must define a <function>match</function>
-    function. The function takes one argument (other than
-    <function>self</function>), which is an object of type
-    <function>Person</function> to compare against. The function
-    should return a 1 if the person matches the filter, or a zero if
-    the person does not.
-    </para>
-    <figure id="filtersrc">
-    <title>Sample filter implementation</title>
-    <programlisting>
-import Filter
-import string
-import intl
-_ = intl.gettext
-
-# class definition
-
-class SubString(Filter.Filter):
-
-    def match(self,person):
-        name = person.getPrimaryName().getName()
-        return string.find(name,self.text) >= 0
-
-# module functions
-
-def get_name(s):
-    return _("Names that contain a substring")
-
-def create(text):
-    return SubString(text)
-
-def need_qualifier():
-    return 1
-    </programlisting>
-    </figure>
-   </sect2>
- </sect1>
-
- <!-- ============= Writing Reports ============================= -->
-
- <sect1 id="writingreports">
-  <title>Writing Reports</title>
-   <para>
-   Users can create their own report generators and add them to
-   <application>gramps</application>.  By adding the report generator
-   to the user's private filter directory (<filename
-   class="directory">~/.gramps/plugins</filename>), the report
-   generator filter will be automatically recognized the next time
-   that the program is started.
-   </para>
-   <sect2 id="createreport">
-    <title>Creating a report generator</title>
-    <para>
-     Like filters, report generators are written in the
-     <application>python</application> language. Fewer restrictions
-     are made on report generators than on filters.  The report
-     generator is passed the current <application>gramps</application>
-     database and the active person.  The generator needs to take
-     special care to make sure that it does not alter the database in
-     anyway.
-    </para>
-    <para>
-    The function <function>get_name</function> is used to provide the
-    name of the the report generator. As with a filter definition,
-    this string should support internationalization via the
-    <function>intl</function> module. The returned string consists of
-    two parts, separated by a forward slash.  The first part of the
-    string is the category of the report generator.
-    <application>gramps</application> uses this part to group similar
-    reports together in the interface. The second part of the string
-    is the actual name of the reprot generator, and will be displayed
-    in the report menu.
-    </para>
-    <para>
-    A report generator module must supply the
-    <function>report</function> function, and can optionally define
-    the <function>get_description</function> and
-    <function>get_xpm_data</function> functions.  The
-    <function>report</function> takes two arguments &mdash; a database
-    (of type <function>RelDataBase</function>) and the currently
-    selected person (of type <function>Person</function>). The
-    <function>report</function> is reponsible for generating the
-    actual report.
-    </para>
-    <para>
-    If the <function>get_description</function> is defined, it is used
-    to provide a more detailed description of the report. The
-    description is used to provide the user with more information in
-    the report selection window.  The function takes no arguments, and
-    should return a text string.
-    </para>
-    <para>
-    If the <function>get_xpm_data</function> is defined, it is used to
-    provide an graphic logo for the report in the report selection
-    window.  The function takes no arguments, and should return a list
-    of strings containing the XPM file data.  The XPM image should be
-    48x48 pixels in size.
-    </para>
-    <figure id="reportsrc">
-    <title>Sample report implementation</title>
-    <programlisting>
-import intl
-_ = intl.gettext
-
-def report(database,person):
-   ... actual code ...
-
-def get_description():
-    return "A detailed text description of what the report generator does"
-
-def get_name():
-    return _("Category/report name")
-
-def get_xpm_image():
-    return [
-    "... XPM image data"
-    ]
-    </programlisting>
-    </figure>
-   </sect2>
-   <sect2 id="alittlehelp">
-    <title>A little help - Format Interfaces</title>
-    <para>
-    <application>gramps</application> provides some help with writing
-    reports.  Several generic python classes exist that aid in the
-    writing of report generators.  These classes provide an abstract
-    interface for a type of document, such as a drawing, word
-    processor document, or a spreadsheet.  From these core classes,
-    <application>gramps</application> derives interfaces to various
-    document formats.  This means that by coding to the generic word
-    processing class (<function>TextDoc</function>), a report
-    generator can instant access to multiple file formats (such as
-    HTML, OpenOffice, and AbiWord).
-    </para>
-    <para>
-    This scheme of deriving a output format from a generic base class
-    also makes it easier to add new formats.  Creating a new
-    derivied class targeting a different format (such as
-    <application>KWord</application> or
-    <application>LaTeX</application>) makes it easy for existing
-    report generators to use the new formats.
-    </para>
-   </sect2>
- </sect1>
-
- <!-- ============= Writing Tools ============================= -->
-
- <sect1 id="writingtools">
-  <title>Writing Tools</title>
-  <para>
-  </para>
-
- </sect1>
-
- <!-- ============= Various Sections ============================= -->
-
- <!-- Here you should add, if necessary, several more sect1's,
- describing other windows (besides the main one), file formats,
- preferences dialogs,  etc. as appropriate. Try not to make any of
- these sections too long. -->
-
-
- <!-- ============= Bugs ================================== -->
- <!-- This section should describe known bugs and limitations of
-      the program if there are any - please be frank and list all
-      problems you know of. -->
- <sect1 id="bugs">
-  <title>Known Bugs and Limitations</title>
-  <para>
-   This application has no known bugs.
-  </para>
- </sect1>
-
-
-<!-- ============= Authors ================================ -->
-
- <sect1 id="authors">
-  <title>Authors</title>
-  <para>
-   <application>gramps</application> was written by Donald N. Allingham
-   (<email>donaldallingham@home.com</email>). To find more information about
-   <application>gramps</application>, please visit the <ulink
-   url="http://gramps.sourceforge.net" type="http">gramps Web
-   page</ulink>.  
-  </para>
-
-  <para>
-   This manual was written by Donald N. Allingham
-   (<email>donaldallingham@home.com</email>) and Lawrence L. Allingham
-   (<email>llkla@erinet.com</email>).
-  </para>
-
-  <!-- For translations: uncomment this:
-
-  <para>
-   Latin translation was done by ME
-   (<email>MYNAME@MYADDRESS</email>). Please send all  comments  and
-   suggestions regarding this translation to SOMEWHERE.
-  </para>
-
-  -->
-
- </sect1>
-
-
- <!-- ============= Application License ============================= -->
-
- <sect1 id="license">
-  <title>License</title>
-  <para>
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the  <ulink type="help" url="gnome-help:gpl">
-    <citetitle>GNU General Public License</citetitle></ulink> as
-   published by the Free Software Foundation; 
-   either version 2 of the License, or (at your option) any later
-   version.
-  </para>
-  <para>
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   <citetitle>GNU General Public License</citetitle> for more details.
-  </para>
-  <para>
-   A copy of the <citetitle>GNU General Public License</citetitle> is
-   included as an appendix to the <citetitle>GNOME Users
-   Guide</citetitle>.  You may also obtain a copy of the
-   <citetitle>GNU General Public License</citetitle> from the Free
-   Software Foundation by visiting <ulink type="http"
-   url="http://www.fsf.org">their Web site</ulink> or by writing to
-   <address>
-    Free Software Foundation, Inc.
-    <street>59 Temple Place</street> - Suite 330
-    <city>Boston</city>, <state>MA</state> <postcode>02111-1307</postcode>
-    <country>USA</country>
-   </address>
-  </para>
- </sect1>
-</article>
-
-
-
-
-
-
-
-
-

gramps/doc/sgmldocs.make

@@ -1,155 +0,0 @@
-# To use this template:
-#     1) Define: figs, docname, lang, omffile, sgml_ents although figs, 
-#        omffile, and sgml_ents may be empty in your Makefile.am which 
-#        will "include" this one 
-#     2) Figures must go under figures/ and be in PNG format
-#     3) You should only have one document per directory 
-#
-#        Note that this makefile forces the directory name under
-#        $prefix/share/gnome/help/ to be the same as the SGML filename
-#        of the document.  This is required by GNOME. eg:
-#        $prefix/share/gnome/help/fish_applet/C/fish_applet.sgml
-#                                 ^^^^^^^^^^^   ^^^^^^^^^^^
-# Definitions:
-#   figs         A list of screenshots which will be included in EXTRA_DIST
-#                Note that these should reside in figures/ and should be .png
-#                files, or you will have to make modifications below.
-#   docname      This is the name of the SGML file: <docname>.sgml
-#   lang         This is the document locale
-#   omffile      This is the name of the OMF file.  Convention is to name
-#                it <docname>-<locale>.omf.
-#   sgml_ents    This is a list of SGML entities which must be installed 
-#                with the main SGML file and included in EXTRA_DIST. 
-# eg:
-#   figs = \
-#          figures/fig1.png            \
-#          figures/fig2.png
-#   docname = scrollkeeper-manual
-#   lang = C
-#   omffile=scrollkeeper-manual-C.omf
-#   sgml_ents = fdl.sgml
-#   include $(top_srcdir)/help/sgmldocs.make
-#   dist-hook: app-dist-hook
-#
-
-docdir = $(datadir)/gnome/help/$(docname)/$(lang)
-
-doc_DATA = index.html
-
-sgml_files = $(sgml_ents) $(docname).sgml
-
-omf_dir=$(top_srcdir)/omf-install
-
-EXTRA_DIST = $(sgml_files) $(doc_DATA) $(omffile) $(figs)
-
-CLEANFILES = omf_timestamp
-
-# when doing a distclean, we also want to clear out html files:
-CONFIG_CLEAN_FILES = index.html $(docname)/*.html $(docname)/stylesheet-images/*.gif
-
-all: index.html omf
-
-omf: omf_timestamp
-
-omf_timestamp: $(omffile)
-	-for file in $(omffile); do \
-	  scrollkeeper-preinstall $(docdir)/$(docname).sgml $$file $(omf_dir)/$$file; \
-	done
-	touch omf_timestamp
-
-index.html: $(docname)/index.html
-	-cp $(docname)/index.html .
-  
-
-# The weird srcdir trick is because the db2html from the Cygnus RPMs
-# cannot handle relative filenames.
-# The t1 test is for certain versions of jw that create cryptic
-# html pages, o fwhich the index is called "t1".  Also, the jw
-# script from docbook-utils 0.6.9 does not copy the template 
-# stylesheet-images directory like the db2html script does, so 
-# we give it a little help (at least for now)
-
-$(docname)/index.html: $(docname).sgml
-	-srcdir=`cd $(srcdir) && pwd`;   \
-	if test "$(HAVE_JW)" = 'yes' ; then \
-	   if test -f /usr/share/sgml/docbook/dsssl-stylesheets/images/next.gif ; then \
-	        mkdir -p $$srcdir/$(docname)/stylesheet-images ; \
-	   	cp /usr/share/sgml/docbook/dsssl-stylesheets/images/*.gif $$srcdir/$(docname)/stylesheet-images/ ; \
-	   fi; \
-	   jw -c /etc/sgml/catalog $$srcdir/$(docname).sgml -o $$srcdir/$(docname); \
-	else \
-	   db2html $$srcdir/$(docname).sgml; \
-	fi
-	if test -f $(docname)/t1.html; then \
-	   cd $(srcdir)/$(docname) && cp t1.html index.html; \
-	   cd $(srcdir); \
-	fi
-
-$(docname).sgml: $(sgml_ents)
-	-ourdir=`cd . && pwd`;  \
-	cd $(srcdir);   \
-	cp $(sgml_ents) $$ourdir
-
-app-dist-hook: index.html
-	-$(mkinstalldirs) $(distdir)/$(docname)/stylesheet-images
-	-$(mkinstalldirs) $(distdir)/figures
-	-cp $(srcdir)/$(docname)/*.html $(distdir)/$(docname)
-	-for file in $(srcdir)/$(docname)/*.css; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  cp $$file $(distdir)/$(docname)/$$basefile ; \
-	done
-	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  cp $$file $(distdir)/$(docname)/stylesheet-images/$$basefile ; \
-	done
-	-if [ -e topic.dat ]; then \
-		cp $(srcdir)/topic.dat $(distdir); \
-	 fi
-
-install-data-am: index.html omf
-	-$(mkinstalldirs) $(DESTDIR)$(docdir)/stylesheet-images
-	-$(mkinstalldirs) $(DESTDIR)$(docdir)/figures
-	-cp $(srcdir)/$(sgml_files) $(DESTDIR)$(docdir)
-	-for file in $(srcdir)/$(docname)/*.html $(srcdir)/$(docname)/*.css; do \
-	  basefile=`echo $$file | sed -e 's,^.*/,,'`; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/$$basefile; \
-	done
-	-for file in $(srcdir)/figures/*.png; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/figures/$$basefile; \
-	done
-	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  $(INSTALL_DATA) $$file $(DESTDIR)$(docdir)/stylesheet-images/$$basefile; \
-	done
-	-if [ -e $(srcdir)/topic.dat ]; then \
-		$(INSTALL_DATA) $(srcdir)/topic.dat $(DESTDIR)$(docdir); \
-	 fi
-
-$(docname).ps: $(srcdir)/$(docname).sgml
-	-srcdir=`cd $(srcdir) && pwd`; \
-	db2ps $$srcdir/$(docname).sgml
-
-$(docname).rtf: $(srcdir)/$(docname).sgml
-	-srcdir=`cd $(srcdir) && pwd`; \
-	db2ps $$srcdir/$(docname).sgml
-
-uninstall-local:
-	-for file in $(srcdir)/$(docname)/stylesheet-images/*.gif; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  rm -f $(docdir)/stylesheet-images/$$basefile; \
-	done
-	-for file in $(srcdir)/figures/*.png; do \
-	  basefile=`echo $$file | sed -e  's,^.*/,,'`; \
-	  rm -f $(docdir)/figures/$$basefile; \
-	done
-	-for file in $(srcdir)/$(docname)/*.html $(srcdir)/$(docname)/*.css; do \
-	  basefile=`echo $$file | sed -e 's,^.*/,,'`; \
-	  rm -f $(DESTDIR)$(docdir)/$$basefile; \
-	done
-	-for file in $(sgml_files); do \
-	  rm -f $(DESTDIR)$(docdir)/$$file; \
-	done
-	-rmdir $(DESTDIR)$(docdir)/stylesheet-images
-	-rmdir $(DESTDIR)$(docdir)/figures
-	-rmdir $(DESTDIR)$(docdir)

gramps/example/gedcom/sample.ged

@@ -1,672 +0,0 @@
-0 HEAD
-1 SOUR FTW
-2 VERS 8.0
-2 NAME Family Tree Maker for Windows
-2 CORP Genealogy.com
-3 ADDR 39500 Stevenson Pl.  #204
-4 CONT Fremont, CA 95439
-3 PHON (510) 794-6850
-1 DEST FTW
-1 DATE 3 JUN 2001
-1 CHAR ANSEL
-1 FILE C:\My Documents\Family Tree\Sample.GED
-1 GEDC
-2 VERS 5.5
-2 FORM LINEAGE-LINKED
-1 _SCHEMA
-2 INDI
-3 _FA1
-4 LABL Marriage fact
-3 _FA2
-4 LABL Fact 2
-3 _FA3
-4 LABL Fact 3
-3 _FA4
-4 LABL Fact 4
-3 _FA5
-4 LABL Fact 5
-3 _FA6
-4 LABL Fact 6
-3 _FA7
-4 LABL Fact 7
-3 _FA8
-4 LABL Fact 8
-3 _FA9
-4 LABL Fact 9
-3 _FA10
-4 LABL Fact 10
-3 _FA11
-4 LABL Fact 11
-3 _FA12
-4 LABL Fact 12
-3 _FA13
-4 LABL Fact 13
-3 _MREL
-4 LABL Relationship to Mother
-3 _FREL
-4 LABL Relationship to Father
-2 FAM
-3 _FA1
-4 LABL Marriage fact
-3 _FA2
-4 LABL Fact 2
-3 _MSTAT
-4 LABL Marriage Beginning Status
-3 _MEND
-4 LABL Marriage Ending Status
-0 @I01@ INDI
-1 NAME Edwin Michael /Smith/
-2 SOUR @S1600@
-1 SEX M
-1 TITL Grand Poobah
-1 BIRT
-2 DATE 24 MAY 1961
-2 PLAC San Jose, Santa Clara Co., CA
-1 OCCU
-2 PLAC Software Engineer
-1 EDUC
-2 DATE BET. 1979 - 1984
-2 PLAC UC Berkeley
-1 _DEG
-2 DATE 1984
-2 PLAC B.S.E.E.
-1 FAMS @F01@
-1 FAMC @F02@
-0 @I02@ INDI
-1 NAME Alice Paula /Perkins/
-2 SOUR @S1600@
-3 PAGE 1933 BIRTH: NV, Washoe Co., Sparks, Birth Certificate, Nevada State Department of Health, Vital Records, Sparks, NV, certificate #599632
-3 DATA
-4 TEXT Alice Paula Perkins born 22 Nov 1933, Sparks, Washoe Co, Nevada daughter of Paul Perkins and Stella Mason.
-2 SOUR @S1601@
-1 SEX F
-1 BIRT
-2 DATE 22 NOV 1933
-2 PLAC Sparks, Washoe Co., NV
-1 REFN 3
-1 FAMS @F02@
-0 @I03@ INDI
-1 NAME Martin /Smith/
-1 SEX M
-1 BIRT
-2 DATE BET. 1794 - 1796
-2 PLAC Tommarp, Kristianstad Lan, Sweden
-1 DEAT
-2 PLAC Sweden
-1 REFN 366
-1 FAMS @F03@
-1 FAMC @F04@
-0 @I04@ INDI
-1 NAME Elna /Jefferson/
-1 SEX F
-1 BIRT
-2 DATE 14 SEP 1800
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 DEAT
-2 PLAC Sweden
-1 CHR
-2 DATE 16 SEP 1800
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 REFN 367
-1 FAMS @F03@
-0 @I05@ INDI
-1 NAME Martin /Smith/
-1 SEX M
-1 BIRT
-2 DATE 19 NOV 1830
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 DEAT
-2 DATE BET. 1899 - 1905
-2 PLAC Sweden
-1 BAPM
-2 DATE 23 NOV 1830
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 REFN 371
-1 FAMS @F05@
-1 FAMC @F03@
-1 NOTE @NI05@
-0 @NI05@ NOTE
-1 CONC
-1 CONT BIOGRAPHY
-1 CONT Martin was listed as being a Husman, (owning a house as opposed to a
-1 CONT farm) in the house records of Gladsax.
-0 @I06@ INDI
-1 NAME Kerstina /Hansdotter/
-1 SEX F
-1 BIRT
-2 DATE 29 NOV 1832
-2 PLAC Smestorp, Kristianstad Lan, Sweden
-1 DEAT
-2 DATE BEF. 1908
-2 PLAC Sweden
-1 REFN 374
-1 FAMS @F05@
-0 @I07@ INDI
-1 NAME Gustaf /Smith/, Sr.
-1 SEX M
-1 BIRT
-2 DATE 28 NOV 1862
-2 PLAC Grostorp, Kristianstad Lan, Sweden
-1 DEAT
-2 DATE BEF. 23 JUL 1930
-2 PLAC Sparks, Washoe Co., NV
-1 IMMI
-2 DATE 21 MAY 1908
-2 PLAC Copenhagen, Denmark
-1 CHR
-2 DATE 7 DEC 1862
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 REFN 377
-1 FAMS @F06@
-1 FAMC @F05@
-0 @I08@ INDI
-1 NAME Anna /Hansdotter/
-1 SEX F
-1 BIRT
-2 DATE 2 OCT 1864
-2 PLAC Loderup, Malmous Lan, Sweden
-1 DEAT
-2 DATE 29 SEP 1945
-2 PLAC Sparks, Washoe Co., NV
-1 FAMS @F06@
-0 @I09@ INDI
-1 NAME Kirsti Marie /Smith/
-1 SEX F
-1 BIRT
-2 DATE 15 DEC 1886
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 18 JUL 1966
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMS @F07@
-1 FAMC @F06@
-0 @I10@ INDI
-1 NAME Astrid Shermanna Augusta /Smith/
-1 SEX F
-1 BIRT
-2 DATE 31 JAN 1889
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 21 DEC 1963
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMS @F08@
-1 FAMC @F06@
-0 @I11@ INDI
-1 NAME Hjalmar /Smith/
-1 SEX M
-1 BIRT
-2 DATE 31 JAN 1893
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 25 SEP 1894
-2 PLAC Ronne, Bornholm, Denmark
-1 FAMC @F06@
-0 @I12@ INDI
-1 NAME Hjalmar /Smith/
-2 SOUR @S1600@
-1 SEX M
-1 BIRT
-2 DATE 7 APR 1895
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 26 JUN 1975
-2 PLAC Reno, Washoe Co., NV
-1 BAPM
-2 DATE 3 JUN 1895
-2 PLAC Ronne Bornholm, Denmark
-1 IMMI
-2 DATE 14 NOV 1912
-2 PLAC Copenhagen, Denmark
-1 REFN 364
-1 FAMS @F09@
-1 FAMC @F06@
-1 NOTE @NI12@
-0 @NI12@ NOTE
-1 CONC
-1 CONT BIOGRAPHY
-1 CONT Hjalmar sailed from Copenhagen, Denmark on the OSCAR II, 14 November
-1 CONT 1912 arriving in New York 27 November 1912. He was seventeen years
-1 CONT old. On the ship passenger list his trade was listed as a Blacksmith.
-1 CONT He came to Reno, Nevada and lived with his sister Marie for a time
-1 CONT before settling in Sparks. He worked for Southern Pacific Railroad as
-1 CONT a car inspector for a time, then went to work for Standard Oil
-1 CONT Company. He enlisted in the army at Sparks 7 December 1917 and served
-1 CONT as a Corporal in the Medical Corp until his discharge 12 August 1919
-1 CONT at the Presidio in San Francisco, California. Both he and Marjorie are
-1 CONT buried in the Masonic Memorial Gardens Mausoleum in Reno, he the 30th
-1 CONT June 1975, and she the 25th of June 1980.
-0 @I13@ INDI
-1 NAME Gus /Smith/
-1 SEX M
-1 BIRT
-2 DATE 11 SEP 1897
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 21 OCT 1963
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMS @F10@
-1 FAMC @F06@
-0 @I14@ INDI
-1 NAME Carl Emil /Smith/
-1 SEX M
-1 BIRT
-2 DATE 20 DEC 1899
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 28 JAN 1959
-2 PLAC Reno, Washoe Co., NV
-1 FAMC @F06@
-0 @I15@ INDI
-1 NAME Hans Peter /Smith/
-1 SEX M
-1 BIRT
-2 DATE 17 APR 1904
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 29 JAN 1977
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMS @F11@
-1 FAMS @F15@
-1 FAMC @F06@
-0 @I16@ INDI
-1 NAME Edwin /Willard/
-1 SEX M
-1 BIRT
-2 DATE ABT. 1886
-1 FAMS @F07@
-0 @I17@ INDI
-1 NAME Herman Julius /Nielsen/
-1 SEX M
-1 BIRT
-2 DATE 31 AUG 1889
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 1945
-1 FAMS @F08@
-0 @I18@ INDI
-1 NAME John Hjalmar /Smith/
-2 SOUR @S1601@
-1 SEX M
-1 BIRT
-2 DATE 30 JAN 1932
-2 PLAC San Francisco, San Francisco Co, CA
-1 FAMS @F02@
-1 FAMC @F09@
-0 @I19@ INDI
-1 NAME Marjorie Lee /Smith/
-2 SOUR @S1600@
-1 SEX F
-1 BIRT
-2 DATE 4 NOV 1934
-2 PLAC Reno, Washoe Co. NV
-1 FAMC @F09@
-0 @I20@ INDI
-1 NAME Evelyn /Michaels/
-1 SEX F
-1 BIRT
-2 DATE ABT. 1897
-1 FAMS @F10@
-0 @I21@ INDI
-1 NAME Jennifer /Anderson/
-1 SEX F
-1 BIRT
-2 DATE 5 NOV 1907
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 29 MAY 1985
-2 PLAC San Francisco, San Francisco Co., , CA
-1 FAMS @F15@
-0 @I22@ INDI
-1 NAME Lillie Harriet /Jones/
-1 SEX F
-1 BIRT
-2 DATE 2 MAY 1910
-2 PLAC Ronne, Bornholm, Denmark
-1 DEAT
-2 DATE 26 JUN 1990
-1 FAMS @F11@
-0 @I23@ INDI
-1 NAME Magnes /Smith/
-1 SEX M
-1 BIRT
-2 DATE 6 OCT 1858
-2 PLAC Simrishamn, Kristianstad Lan, Sweden
-1 DEAT
-2 DATE 20 FEB 1910
-2 PLAC Ronne, Bornholm, Denmark
-1 FAMS @F12@
-1 FAMC @F05@
-0 @I24@ INDI
-1 NAME Emil /Smith/
-1 SEX M
-1 BIRT
-2 DATE 27 SEP 1860
-2 PLAC Simrishamn, Kristianstad Lan, Sweden
-1 FAMC @F05@
-0 @I25@ INDI
-1 NAME Anna /Streiffert/
-1 SEX F
-1 BIRT
-2 DATE 23 SEP 1860
-2 PLAC Hoya/Jona/Hoia, Sweden
-1 DEAT
-2 DATE 2 FEB 1927
-2 PLAC Ronne, Bornholm, Denmark
-1 FAMS @F12@
-0 @I26@ INDI
-1 NAME Hanna /Smith/
-1 SEX F
-1 BIRT
-2 DATE 29 JAN 1821
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 FAMC @F03@
-0 @I27@ INDI
-1 NAME Ingar /Smith/
-1 SEX F
-1 BIRT
-2 DATE AFT. 1823
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 FAMC @F03@
-0 @I28@ INDI
-1 NAME Ingeman /Smith/
-1 SEX M
-1 BIRT
-2 DATE 29 JAN 1826
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-1 FAMC @F03@
-0 @I29@ INDI
-1 NAME Marjorie Alice /Smith/
-2 SOUR @S1600@
-1 SEX F
-1 BIRT
-2 DATE 5 FEB 1960
-2 PLAC San Jose, Santa Clara Co., CA
-1 FAMC @F02@
-0 @I30@ INDI
-1 NAME Lloyd /Smith/
-1 SEX M
-1 BIRT
-2 DATE 13 MAR 1935
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMS @F13@
-1 FAMC @F11@
-0 @I31@ INDI
-1 NAME Janis Elaine /Green/
-1 SEX F
-1 BIRT
-2 DATE 2 DEC 1935
-1 FAMS @F13@
-0 @I32@ INDI
-1 NAME Eric Lloyd /Smith/
-1 SEX M
-1 BIRT
-2 DATE 28 AUG 1963
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMS @F14@
-1 FAMC @F13@
-0 @I33@ INDI
-1 NAME Keith Lloyd /Smith/
-1 SEX M
-1 BIRT
-2 DATE 11 AUG 1966
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMC @F13@
-0 @I34@ INDI
-1 NAME Craig Peter /Smith/
-1 SEX M
-1 BIRT
-2 DATE AFT. 1966
-2 PLAC San Francisco, San Francisco Co., CA
-1 FAMC @F13@
-0 @I35@ INDI
-1 NAME Lars Peter /Smith/
-1 SEX M
-1 BIRT
-2 DATE 16 SEP 1991
-2 PLAC Santa Rosa, Sonoma Co., CA
-1 FAMC @F14@
-0 @I36@ INDI
-1 NAME Darcy /Horne/
-1 SEX F
-1 BIRT
-2 DATE 2 JUL 1966
-2 PLAC Sacramento, Sacramento Co., CA
-1 FAMS @F14@
-0 @I37@ INDI
-1 NAME Ingeman /Smith/
-1 SEX M
-1 BIRT
-2 DATE ABT. 1770
-2 PLAC Sweden
-1 FAMS @F04@
-0 @I38@ INDI
-1 NAME Marta /Ericsdotter/
-1 SEX F
-1 BIRT
-2 DATE ABT. 1775
-2 PLAC Sweden
-1 FAMS @F04@
-0 @I39@ INDI
-1 NAME Marjorie /Ohman/
-2 SOUR @S1602@
-2 SOUR @S1600@
-1 SEX F
-1 BIRT
-2 DATE 3 JUN 1903
-2 PLAC Denver, Denver Co., CO
-1 DEAT
-2 DATE 22 JUN 1980
-2 PLAC Reno, Washoe Co., NV
-1 REFN 365
-1 FAMS @F09@
-0 @I40@ INDI
-1 NAME Janice Ann /Adams/
-1 SEX F
-1 BIRT
-2 DATE 26 AUG 1965
-2 PLAC Fremont, Alameda Co., CA
-1 OCCU
-2 PLAC Retail Manager
-1 _DEG
-2 DATE 1988
-2 PLAC Business Management
-1 FAMS @F01@
-0 @I41@ INDI
-1 NAME Amber Marie /Smith/
-1 SEX F
-1 BIRT
-2 DATE 12 APR 1998
-2 PLAC Hayward, Alameda Co., CA
-1 CHR
-2 DATE 26 APR 1998
-2 PLAC Community Presbyterian Church, Danville, CA
-1 FAMC @F01@
-0 @I42@ INDI
-1 NAME Mason Michael /Smith/
-1 SEX M
-1 BIRT
-2 DATE 26 JUN 1996
-2 PLAC Hayward, Alameda Co., CA
-1 CHR
-2 DATE 10 JUL 1996
-2 PLAC Community Presbyterian Church, Danville, CA
-1 FAMC @F01@
-0 @F01@ FAM
-1 HUSB @I01@
-1 WIFE @I40@
-1 CHIL @I42@
-2 _FREL Adopted
-2 _MREL Adopted
-1 CHIL @I41@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE 27 MAY 1995
-2 PLAC San Ramon, Conta Costa Co., CA
-1 ENGA
-2 DATE 5 OCT 1994
-2 PLAC San Francisco, CA
-0 @F02@ FAM
-1 HUSB @I18@
-1 WIFE @I02@
-1 CHIL @I29@
-2 _FREL Adopted
-2 _MREL Adopted
-1 CHIL @I01@
-2 _FREL Adopted
-2 _MREL Adopted
-1 MARR
-2 DATE 4 JUN 1954
-2 PLAC Sparks, Washoe Co., NV
-2 SOUR Hannah was the widow of James Matthewson.
-0 @F03@ FAM
-1 HUSB @I03@
-1 WIFE @I04@
-1 CHIL @I26@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I27@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I28@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I05@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE ABT. 1816
-2 PLAC Gladsax, Kristianstad Lan, Sweden
-0 @F04@ FAM
-1 HUSB @I37@
-1 WIFE @I38@
-1 CHIL @I03@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE ABT. 1790
-2 PLAC Sweden
-0 @F05@ FAM
-1 HUSB @I05@
-1 WIFE @I06@
-1 CHIL @I23@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I24@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I07@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE ABT. 1856
-0 @F06@ FAM
-1 HUSB @I07@
-1 WIFE @I08@
-1 CHIL @I09@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I10@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I11@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I12@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I13@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I14@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I15@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE 27 NOV 1885
-2 PLAC Ronne, Bornholm, Denmark
-0 @F07@ FAM
-1 HUSB @I16@
-1 WIFE @I09@
-1 MARR
-2 DATE ABT. 1910
-0 @F08@ FAM
-1 HUSB @I17@
-1 WIFE @I10@
-1 MARR
-2 DATE 30 NOV 1912
-2 PLAC Ronne, Bornholm, Denmark
-0 @F09@ FAM
-1 HUSB @I12@
-1 WIFE @I39@
-1 CHIL @I18@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I19@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE 31 OCT 1927
-2 PLAC Reno, Washoe Co., NV
-0 @F10@ FAM
-1 HUSB @I13@
-1 WIFE @I20@
-1 MARR
-2 DATE ABT. 1920
-0 @F11@ FAM
-1 HUSB @I15@
-1 WIFE @I22@
-1 CHIL @I30@
-2 _FREL Adopted
-2 _MREL Adopted
-0 @F12@ FAM
-1 HUSB @I23@
-1 WIFE @I25@
-1 MARR
-2 DATE 24 AUG 1884
-2 PLAC Ronne, Bornholm, Denmark
-0 @F13@ FAM
-1 HUSB @I30@
-1 WIFE @I31@
-1 CHIL @I32@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I33@
-2 _FREL Natural
-2 _MREL Natural
-1 CHIL @I34@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE 10 AUG 1958
-2 PLAC San Francisco, San Francisco Co., CA
-0 @F14@ FAM
-1 HUSB @I32@
-1 WIFE @I36@
-1 CHIL @I35@
-2 _FREL Natural
-2 _MREL Natural
-1 MARR
-2 DATE 12 JUL 1986
-2 PLAC Woodland, Yolo Co., CA
-0 @F15@ FAM
-1 HUSB @I15@
-1 WIFE @I21@
-0 @S1600@ SOUR
-1 TITL Birth Certificate
-1 REPO
-2 CALN
-3 MEDI Book
-0 @S1601@ SOUR
-1 TITL Birth Records
-1 REPO
-2 CALN
-3 MEDI Book
-0 @S1602@ SOUR
-1 TITL Birth, Death and Marriage Records
-1 REPO
-2 CALN
-3 MEDI Book
-0 TRLR

gramps/gramps.sh.in

@@ -1,48 +0,0 @@
-#! /bin/sh
-# @configure_input@
-#
-# Gramps - a GTK+/GNOME based genealogy program
-#
-# Copyright (C) 2000  Donald N. Allingham
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-#
-
-prefix=@prefix@
-
-export GRAMPSDIR=@datadir@/@PACKAGE@
-export PYTHONPATH=$GRAMPSDIR
-export GRAMPSI18N=@prefix@/share/locale
-
-preload=""
-
-#
-# Mandrake has a tendency to build dynamic libraries without the proper
-# dependencies in them. This causes havoc with the python gtk libraries.
-# Preload the know problem libraries so that gramps does not fail under
-# Mandrake
-#
-for l in /usr/X11R6/lib/libX11.so /usr/lib/libgdk-1.2.so.0 /usr/lib/libgdk_imlib.so.1
-do
-  if [ -f $l ]; then
-    preload="$preload $l"
-  fi
-done
-
-if [ "$preload" != "" ]; then
-    export LD_PRELOAD="$preload"
-fi
-
-@PYTHON@ $GRAMPSDIR/gramps.py $*

gramps/gramps.spec

@@ -1,102 +0,0 @@
-%define ver      0.8.1
-%define rel      pl1
-%define prefix   /usr
-
-Summary: Genealogical Research and Analysis Management Programming System.
-Name: gramps
-Version: %ver
-Release: %rel
-Copyright: GPL
-Group: Applications/Genealogy
-Source: http://download.sourceforge.net/gramps/gramps-%{ver}.tar.gz
-BuildRoot: /var/tmp/%{name}-%{version}-root
-
-URL: http://gramps.sourceforge.net
-
-Requires: python >= 1.5.2
-Requires: pygnome >= 1.0.53
-Requires: _gladegnomemodule.so
-Requires: pyexpat.so
-
-BuildRequires: scrollkeeper >= 0.1.4
-BuildRequires: automake >= 1.6
-BuildRequires: autoconf >= 2.52
-
-%description
-gramps (Genealogical Research and Analysis Management Programming
-System) is a GNOME based genealogy program supporting a Python
-based plugin system.
-
-%prep
-%setup
-
-%build
-if [ ! -f configure ]; then
-  CFLAGS="$MYCFLAGS" ./autogen.sh $MYARCH_FLAGS --prefix=%prefix
-else
-  CFLAGS="$MYCFLAGS" ./configure $MYARCH_FLAGS --prefix=%prefix
-fi
-
-make
-
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-make GNOME_DATADIR=$RPM_BUILD_ROOT%{prefix}/share prefix=$RPM_BUILD_ROOT%{prefix} install
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-, root, root)
-
-%doc README COPYING TODO INSTALL
-
-%{prefix}/bin/gramps
-
-%{_datadir}/gnome/help/gramps-manual/C/*
-%{_datadir}/gnome/help/extending-gramps/C/*
-
-%{_datadir}/gnome/apps/Applications/gramps.desktop
-%{_datadir}/pixmaps/gramps.png
-%{_datadir}/locale/*/LC_MESSAGES/gramps.mo
-
-%dir %{_datadir}/gramps
-%dir %{_datadir}/gramps/plugins
-%dir %{_datadir}/gramps/docgen
-%dir %{_datadir}/gramps/filters
-%dir %{_datadir}/gramps/data
-%dir %{_datadir}/gramps/data/templates
-
-%{_datadir}/gramps/*.xpm
-%{_datadir}/gramps/*.jpg
-%{_datadir}/gramps/*.png
-%{_datadir}/gramps/*.py
-%{_datadir}/gramps/*.pyo
-%{_datadir}/gramps/*.glade
-%{_datadir}/gramps/*.so
-%{_datadir}/gramps/docgen/*.py
-%{_datadir}/gramps/docgen/*.pyo
-%{_datadir}/gramps/filters/*.py
-%{_datadir}/gramps/filters/*.pyo
-%{_datadir}/gramps/plugins/*.py
-%{_datadir}/gramps/plugins/*.pyo
-%{_datadir}/gramps/plugins/*.glade
-%{_datadir}/gramps/data/gedcom.xml
-%{_datadir}/gramps/data/templates/*.tpkg
-%{_datadir}/gramps/data/templates/*.xml
-
-%{prefix}/man/man1/gramps.1*
-
-%{_datadir}/omf/gramps
- 
-%post
-if which scrollkeeper-update>/dev/null 2>&1; then scrollkeeper-update; fi
-
-%postun
-if which scrollkeeper-update>/dev/null 2>&1; then scrollkeeper-update; fi
-
-%changelog
-* Fri Jun 14 2002 Donald Peterson <dpeterso@engr.ors.edu>
-- add scrollkeeper dependencies and some file cleanup

gramps/gramps.spec.in

@@ -1,102 +0,0 @@
-%define ver      @VERSION@
-%define rel      @RELEASE@
-%define prefix   /usr
-
-Summary: Genealogical Research and Analysis Management Programming System.
-Name: gramps
-Version: %ver
-Release: %rel
-Copyright: GPL
-Group: Applications/Genealogy
-Source: http://download.sourceforge.net/gramps/gramps-%{ver}.tar.gz
-BuildRoot: /var/tmp/%{name}-%{version}-root
-
-URL: http://gramps.sourceforge.net
-
-Requires: python >= 1.5.2
-Requires: pygnome >= 1.0.53
-Requires: _gladegnomemodule.so
-Requires: pyexpat.so
-
-BuildRequires: scrollkeeper >= 0.1.4
-BuildRequires: automake >= 1.6
-BuildRequires: autoconf >= 2.52
-
-%description
-gramps (Genealogical Research and Analysis Management Programming
-System) is a GNOME based genealogy program supporting a Python
-based plugin system.
-
-%prep
-%setup
-
-%build
-if [ ! -f configure ]; then
-  CFLAGS="$MYCFLAGS" ./autogen.sh $MYARCH_FLAGS --prefix=%prefix
-else
-  CFLAGS="$MYCFLAGS" ./configure $MYARCH_FLAGS --prefix=%prefix
-fi
-
-make
-
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-make GNOME_DATADIR=$RPM_BUILD_ROOT%{prefix}/share prefix=$RPM_BUILD_ROOT%{prefix} install
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-, root, root)
-
-%doc README COPYING TODO INSTALL
-
-%{prefix}/bin/gramps
-
-%{_datadir}/gnome/help/gramps-manual/C/*
-%{_datadir}/gnome/help/extending-gramps/C/*
-
-%{_datadir}/gnome/apps/Applications/gramps.desktop
-%{_datadir}/pixmaps/gramps.png
-%{_datadir}/locale/*/LC_MESSAGES/gramps.mo
-
-%dir %{_datadir}/gramps
-%dir %{_datadir}/gramps/plugins
-%dir %{_datadir}/gramps/docgen
-%dir %{_datadir}/gramps/filters
-%dir %{_datadir}/gramps/data
-%dir %{_datadir}/gramps/data/templates
-
-%{_datadir}/gramps/*.xpm
-%{_datadir}/gramps/*.jpg
-%{_datadir}/gramps/*.png
-%{_datadir}/gramps/*.py
-%{_datadir}/gramps/*.pyo
-%{_datadir}/gramps/*.glade
-%{_datadir}/gramps/*.so
-%{_datadir}/gramps/docgen/*.py
-%{_datadir}/gramps/docgen/*.pyo
-%{_datadir}/gramps/filters/*.py
-%{_datadir}/gramps/filters/*.pyo
-%{_datadir}/gramps/plugins/*.py
-%{_datadir}/gramps/plugins/*.pyo
-%{_datadir}/gramps/plugins/*.glade
-%{_datadir}/gramps/data/gedcom.xml
-%{_datadir}/gramps/data/templates/*.tpkg
-%{_datadir}/gramps/data/templates/*.xml
-
-%{prefix}/man/man1/gramps.1*
-
-%{_datadir}/omf/gramps
- 
-%post
-if which scrollkeeper-update>/dev/null 2>&1; then scrollkeeper-update; fi
-
-%postun
-if which scrollkeeper-update>/dev/null 2>&1; then scrollkeeper-update; fi
-
-%changelog
-* Fri Jun 14 2002 Donald Peterson <dpeterso@engr.ors.edu>
-- add scrollkeeper dependencies and some file cleanup

gramps/install-sh

@@ -1,250 +0,0 @@
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0